Search

Radiative cooling passively removes heat from objects via emission of thermal radiation to cold space. Suitable radiative cooling materials absorb infrared light while they avoid solar heating by either reflecting or transmitting solar radiation, depending on the application. Here, we demonstrate a reflective radiative cooler and a transparent radiative cooler solely based on cellulose derivatives manufactured via electrospinning and casting, respectively. By modifying the microstructure of cellulose materials, we control the solar light interaction from highly reflective (> 90%, porous structure) to highly transparent (approximate to 90%, homogenous structure). Both cellulose materials show high thermal emissivity and minimal solar absorption, making them suitable for daytime radiative cooling. Used as coatings on silicon samples exposed to sun light at daytime, the reflective and transparent cellulose coolers could passively reduce sample temperatures by up to 15 degrees C and 5 degrees C, respectively. Funding Agencies|Linkoping University

Certain bird species have evolved spectacular colors that arise from organized nanostructures of melanin. Its high refractive index (similar to 1.8) and broadband absorptive properties enable vivid structural colors that are nonsusceptible to photo-bleaching. Mimicking natural melanin structural coloration could enable several important applications, in particular, for non-iridescent systems with colors that are independent of incidence angle. Here, we address this by forming melanin photonic crystal microdomes by inkjet printing. Owing to their curved nature, the microdomes exhibit noniridescent vivid structural coloration, tunable throughout the visible range via the size of the nanoparticles. Large-area arrays (>1 cm(2)) of high-quality photonic microdomes could be printed on both rigid and flexible substrates. Combined with scalable fabrication and the nontoxicity of melanin, the presented photonic microdomes with noniridescent structural coloration may find use in a variety of applications, including sensing, displays, and anticounterfeit holograms. Funding Agencies|Wenner-Gren Foundation; Swedish Research CouncilSwedish Research Council; Knut and Alice Wallenberg foundationKnut & Alice Wallenberg Foundation; Swedish Foundation for Strategic researchSwedish Foundation for Strategic Research; Linkoping University; Wallenberg Wood Science Center the Wallenberg Wood Science Centre; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Materials that provide independent control of infrared thermal radiation and haze in the visible could benefit many areas and applications, including clothing, packaging and photovoltaics. Here, we study this possibility for a metamaterial composite paper based on cellulose nanofibrils (CNF) and silicon dioxide (SiO2) microparticles with infrared (IR) Frohlich phonon resonances. This CNF-SiO2 composite shows outstanding transparency in the visible wavelength range, with the option of controlling light diffusion and haze from almost zero to 90% by varying the SiO2 microparticle concentration. We further show that the transparent metamaterial paper could maintain high thermal emissivity in the atmospheric IR window, as attributed to strong IR absorption of both the nanocellulose and the resonant SiO2 microparticles. The high IR emissivity and low visible absorption make the paper suitable for passive radiative cooling and we demonstrate cooling of the paper to around 3 degrees C below ambient air temperature by exposing it to the sky. Funding Agencies|Knut and Allice Wallenberg Foundation via a Wallenberg Scholarship; Knut and Alice Wallenberg foundationKnut & Alice Wallenberg Foundation; Linkoping University; Wallenberg Wood Science Center; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; Swedish Foundation for Strategic ResearchSwedish Foundation for Strategic Research; Swedish Armed Forces Research and Technology programme

Precise manipulation of light-matter interactions has enabled a wide variety of approaches to create bright and vivid structural colors. Techniques utilizing photonic crystals, Fabry-Perot cavities, plasmonics, or high-refractive-index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability of these approaches impede their further development toward flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Here, a novel method is presented to generate structural color images based on monochromic conducting polymer films prepared on metallic surfaces via vapor phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose enables synergistic control of both nanoscale film thickness and polymer permittivity, which generates controllable structural colors from violet to red. Together with grayscale photomasks this enables facile fabrication of high-resolution structural color images. Dynamic tuning of colored surfaces and images via electrochemical modulation of the polymer redox state is further demonstrated. The simple structure, facile fabrication, wide color gamut, and dynamic color tuning make this concept competitive for applications like multifunctional displays. Funding Agencies|Swedish Foundation for Strategic Research (SSF)Swedish Foundation for Strategic Research; Knut and Alice Wallenberg FoundationKnut & Alice Wallenberg Foundation; Swedish Research Council (VR)Swedish Research Council; Wenner-Gren Foundations; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Phase separations in ternary/multinary semiconductor alloys is a major challenge that limits optical and electronic internal device efficiency. We have found ubiquitous local phase separation in In1-xGaxN alloys that persists to nanoscale spatial extent by employing high-resolution nanoimaging technique. We lithographically patterned InN/sapphire substrates with nanolayers of In1-xGaxN down to few atomic layers thick that enabled us to calibrate the near-field infrared response of the semiconductor nanolayers as a function of composition and thickness. We also developed an advanced theoretical approach that considers the full geometry of the probe tip and all the sample and substrate layers. Combining experiment and theory, we identified and quantified phase separation in epitaxially grown individual nanoalloys. We found that the scale of the phase separation varies widely from particle to particle ranging from all Ga- to all In-rich regions and covering everything in between. We have found that between 20 and 25% of particles show some level of Ga-rich phase separation over the entire sample region, which is in qualitative agreement with the known phase diagram of In1-xGaxN system.

We have studied the formation of near-field fringes when sharp edges of materials are imaged using scattering-type scanning near-field optical microscope (s-SNOM). The materials we have investigated include dielectrics, metals, a near-perfect conductor, and those that possess anisotropic permittivity and hyperbolic dispersion. For our theoretical analysis, we use a technique that combines full-wave numerical simulations of tip-sample near-field interaction and signal demodulation at higher orders akin to what is done in typical s-SNOM experiments. Unlike previous tip-sample interaction near-field models, our advanced technique allows simulation of the realistic tip and sample structure. Our analysis clarifies edge imaging of recently emerged layered materials such as hexagonal boron nitride and transition metal dichalcogenides (in particular, molybdenum disulfide), as well as traditional plasmonic materials such as gold. Hexagonal boron nitride is studied at several wavelengths, including the wavelength where it possesses excitation of phonon-polaritons and hyperbolic dispersion. Based on our results of s-SNOM imaging in different demodulation orders, we specify resonant and non-resonant types of edges and describe the edge fringes for each case. We clarify near-field edge-fringe formation at material sharp boundaries, both outside bright fringes and the low-contrast region at the edge, and elaborate on the necessity of separating them from propagating waves on the surface of polaritonic materials.

The appearance of stripe phases is a characteristic signature of strongly correlated quantum materials, and its origin in phase-changing materials has only recently been recognized as the result of the delicate balance between atomic and mesoscopic materials properties. A vanadium dioxide (VO2) single crystal is one such strongly correlated material with stripe phases. Infrared nano-imaging on low-aspect-ratio, single-crystal VO2 microbeams decorated with resonant plasmonic nanoantennas reveals a novel herringbone pattern of coexisting metallic and insulating domains intercepted and altered by ferroelastic domains, unlike previous reports on high-aspect-ratio VO2 crystals where the coexisting metal/insulator domains appear as alternating stripe phases perpendicular to the growth axis. The metallic domains nucleate below the crystal surface and grow towards the surface with increasing temperature as suggested by the near-field plasmonic response of the gold nanorod antennas.

Black phosphorus (BP) is an emerging two-dimensional material with intriguing physical properties. It is highly anisotropic and highly tunable by means of both the number of monolayers and surface doping. Here, we experimentally investigate and theoretically interpret the near-field properties of a-few-atomic-monolayer nanoflakes of BP. We discover near-field patterns of bright outside fringes and a high surface polarizability of nanofilm BP consistent with its surface-metallic, plasmonic behavior at mid-infrared frequencies

Nanophotonic (nanoplasmonic) structures confine, guide, and concentrate light on the nanoscale. Advancement of nanophotonics critically depends on active nanoscale control of these phenomena. Localized control of the insulator and metallic phases of vanadium dioxide (VO2) would open up a universe of applications in nanophotonics via modulation of the local dielectric environment of nanophotonic structures allowing them to function as active devices. Here we show dynamic reversible control of VO2 insulator-to-metal transition (IMT) locally on the scale of 15 nm or less and control of nanoantennas, observed in the near-field for the first time. Using polarization-selective near-field imaging techniques, we monitor simultaneously the IMT in VO2 and the change of plasmons on gold infrared nanoantennas. Structured nanodomains of the metallic VO2 locally and reversibly transform infrared plasmonic dipolar antennas to monopole antennas. Fundamentally, the IMT in VO2 can be triggered on femtosecond timescale to allow ultrafast nanoscale control of optical phenomena. These unique capabilities open up exciting novel applications in active nanophotonics.

The dependency of the structural and optoelectronic properties of InN thin films grown by high-pressure chemical vapor deposition technique on the group V/III molar precursor ratio has been studied. X-ray diffraction, Raman spectroscopy, and IR reflectance spectroscopy have been utilized to study local- and long-range structural ordering as well as optoelectronic properties of the InN epilayers grown on crystalline sapphire substrates. The investigated InN epilayers were grown with group V/III molar precursor ratio varying from 900 to 3600, while all other growth parameters were kept constant. For a group V/III precursor ratio of 2400, the full width-half maximum of the Raman E2(high) mode and XRD (0002) Bragg reflex exhibit minimums of 7.53 cm⁻¹ and 210 arcsec, respectively, with maximized grain size and reduced in-plane strain effect. FTIR data analysis revealed a growth rate of 120 nm/hr, a carrier mobility of 1020 cm²V⁻¹s⁻¹, and a free carrier concentration of 1.7×10 18 cm⁻³ for a V/III ratio of 2400. The Raman analysis indicate that non-polar E2(high) mode remains unaffected from a changing V/III ratio; whereas, polar A1(LO) mode significantly changes with changing V/III ratio. Optical analysis also suggests that LO-phonon correlates with free carrier concentration (ne) and TO-phonon correlates with free carrier mobility (µ) in the InN epilayers.

Results on the achievable growth temperature as a function of the reactor pressure for the growth of InN by high-pressure CVD are presented. As the reactor pressure was increased from 1 bar to 19 bar, the optimal growth temperature raised from 759°C to 876°C, an increase of 6.6 °C/bar. The InN layers were grown in a horizontal flow channel reactor, using a pulsed precursor injection scheme. The structural and optical properties of the epilayers have been investigated by Raman spectroscopy, X-ray diffraction, and IR reflectance spectroscopy.