Search

A novel four-port circulator is presented which uses an inline ferromagnetic element to allow for transmission or reflection depending on the sense of the incident circularly polarized wave. This configuration has been shown to reduce the dependency on ferrite anisotropy and support higher power, low rf loss, operation. An analytic analysis of this device is presented alongside corroborating cold test data of the first prototype. High-power operation was performed at 2.856 GHz, with input power levels up to 8 MW for $3.5~\mu \text{s}$ in a pressurized nitrogen environment. The results from this research not only demonstrate ability to eliminate the use of greenhouse insulators, such as SF6, but also provide conceptual groundwork for a new class of ultrahigh power (50 MW+) nonreciprocal networks including circulators, isolators, phase shifters, and rf switches.

We report the recent measurement of high gradient and rf breakdown rates (BDRs) in a millimeter-wave accelerating cavity powered by a megawatt gyrotron. The cavity is powered by 10 nanoseconds rf pulses, chopped from 3 microsecond gyrotron pulses using a laser-driven silicon switch. The highest achieved accelerating gradient is 230 MV/m corresponding to a peak surface electric field of 520 MV/m after processing the cavity with more than 105 pulses. The initial BDR is about 10−3[1/pulse] and it has not reached a steady state yet. We expect the BDR to further decrease after extended running time.

We are developing a high-gradient, THz-driven electron gun. THz-frequency accelerator structures can enable the development of compact, bright, and efficient particle sources. Our two cell standing-wave gun is powered by a 110 GHz gyrotron and will produce 350 keV electrons with 500 k $W$ of input power. The field emission cathode is a copper tip located in the first cell. High power measurements will include diagnostics to measure the energy spread, charge, and size of the resulting bunch.

SLAC is pursuing high efficiency, low cost RF source designs that are suitable for mass production, in order to enable the next generation of linear accelerators. These efforts have driven the development of compact linac systems with integrated modulators, klystrons, and accelerator structures, based on a modular, low voltage klystron topology. There is substantial demand for compact linacs for X-ray radiography with security applications, and for new radiation therapy machines that reduce treatment times by orders of magnitude and may yield beneficial biological effects. In this presentation, details and challenges for these new compact accelerator systems and the corresponding RF sources are discussed.

In this work, we investigated the delivery of a clinically acceptable pediatric whole brain radiotherapy plan at FLASH dose rates using two lateral opposing 40-MeV electron beams produced by a practically realizable linear accelerator system. The EGSnrc Monte Carlo software modules, BEAMnrc and DOSXYZnrc, were used to generate whole brain radiotherapy plans for a pediatric patient using two lateral opposing 40-MeV electron beams. Electron beam phase space files were simulated using a model of a diverging beam with a diameter of 10 cm at 50 cm SAD (defined at brain midline). The electron beams were collimated using a 10-cm-thick block composed of 5 cm of aluminum oxide and 5 cm of tungsten. For comparison, a 6-MV photon plan was calculated with the Varian AAA algorithm. Electron beam parameters were based on a novel linear accelerator designed for the PHASER system and powered by a commercial 6-MW klystron. Calculations of the linear accelerator’s performance indicated an average beam current of at least 6.25 μA, providing a dose rate of 115 Gy/s at isocenter, high enough for cognition-sparing FLASH effects. The electron plan was less homogenous with a homogeneity index of 0.133 compared to the photon plan’s index of 0.087. Overall, the dosimetric characteristics of the 40-MeV electron plan were suitable for treatment. In conclusion, Monte Carlo simulations performed in this work indicate that two lateral opposing 40-MeV electron beams can be used for pediatric whole brain irradiation at FLASH dose rates of >115 Gy/s and serve as motivation for a practical clinical FLASH radiotherapy system, which can be implemented in the near future.

In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science., 80 pages, 24 figures

Large arrays of cryogenic sensors for various imaging applications ranging across x-ray, gamma-ray, Cosmic Microwave Background (CMB), mm/sub-mm, as well as particle detection increasingly rely on superconducting microresonators for high multiplexing factors. These microresonators take the form of microwave SQUIDs that couple to Transition-Edge Sensors (TES) or Microwave Kinetic Inductance Detectors (MKIDs). In principle, such arrays can be read out with vastly scalable software-defined radio using suitable FPGAs, ADCs and DACs. In this work, we share plans and show initial results for SLAC Microresonator Radio Frequency (SMuRF) electronics, a next-generation control and readout system for superconducting microresonators. SMuRF electronics are unique in their implementation of specialized algorithms for closed-loop tone tracking, which consists of fast feedback and feedforward to each resonator's excitation parameters based on transmission measurements. Closed-loop tone tracking enables improved system linearity, a significant increase in sensor count per readout line, and the possibility of overcoupled resonator designs for enhanced dynamic range. Low-bandwidth prototype electronics were used to demonstrate closed-loop tone tracking on twelve 300-kHz-wide microwave SQUID resonators, spaced at $\sim$6 MHz with center frequencies $\sim$5-6 GHz. We achieve multi-kHz tracking bandwidth and demonstrate that the noise floor of the electronics is subdominant to the noise intrinsic in the multiplexer., 7 pages, 5 figures, Submitted to the Journal of Low Temperature Physics (Proceedings of the 17th International Workshop on Low Temperature Detectors)

Recent studies of rf breakdown physics in cryogenic copper X-band accelerating structures have shown a dramatic increase in the operating gradient while maintaining low breakdown rates. The TOPGUN project, a collaboration between UCLA, SLAC, and INFN, will use this improvement in gradient to create an ultra-high brightness cryogenic normal conducting photoinjector [16] . The brightness is expected to be higher by a factor of 25 relative to the LCLS photogun [9] . This improvement in the brightness will lead to increased performance of X-Ray free electron lasers (FELs) and ultrafast electron diffraction devices [16] . We present the rf design for this S-band photogun, which will be a drop-in replacement for the current LCLS photogun.

This paper explores the physics of vacuum rf breakdowns in high gradient mm-wave accelerating structures. We performed a series of experiments with 100 GHz and 200 GHz metallic accelerating structures, at the Facility for Advanced Accelerator Experimental Tests (FACET) at the SLAC National Accelerator Laboratory. This paper presents the experimental results of rf tests of 100 GHz travelling-wave accelerating structures, made of hard copper-silver alloy. The results are compared with pure hard copper structures. The rf fields were excited by the FACET ultra-relativistic electron beam. The accelerating structures have open geometries, 10 cm long, composed of two halves separated by a variable gap. The rf frequency of the fundamental accelerating mode depends on the gap size and can be changed from 90 GHz to 140 GHz. The measured frequency and pulse length are consistent with our simulations. When the beam travels off-axis, a deflecting field is induced in addition to the decelerating longitudinal field. We measured the deflecting forces by observing the displacement of the electron bunch and used this measurement to verify the expected accelerating gradient. We present the first quantitative measurement of rf breakdown rates in 100 GHz copper-silver accelerating structure, which was 10 −3 per pulse, with peak electric field of 0.42 GV/m, an accelerating gradient of 127 MV/m, at a pulse length of 2.3 ns. The goal of our studies is to understand the physics of gradient limitations in order to increase the energy reach of future accelerators.

We present the design of a rf undulator at 91.392 GHz that has a period of 1.75 mm, while the minimum beam aperture seen by the beam is 2.375 mm. To confine the fields inside the undulator a corrugated waveguide is connected through a matching section to a linear taper and a mirror. After the mirror, a Bragg reflector and a matching section are used to reflect back all the fields leaking out of the mirror opening. This undulator requires approximately 1.4 MW for submicrosecond pulses to generate an equivalent K value of 0.1. Transferring such amounts of power at mm-wave frequencies requires overmoded corrugated waveguides, and coupling through irises creates excessive pulsed heating. We have designed a coupling scheme that allows coupling power from a highly overmoded corrugated waveguide to the undulator cavity through the beam pipe without disturbing the undulator fields. This system of the rf undulator and its coupling scheme allows for fast dynamic control of the polarization of the emitted light.

We report initial high-gradient testing results of a 110 GHz single-cell standing wave accelerating cavity powered by a 1 MW gyrotron. The cavity is fed with 10 ns, 100s of kilowatt pulses, and achieved a field gradient up to 225 MV/m. We also report the observation of rf breakdowns and cavity processing for $\lt /p\gt \gt 10 ^{5}$ pulses.

Recent studies of the performance of radio-frequency (rf) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant increase in five-dimensional electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, by examining an S-band photoinjector operated at $250\text{ }\text{ }\mathrm{MV}/\mathrm{m}$ peak electric field that reaches normalized emittances in the 40 nm-rad range at charges (100--200 pC) suitable for use in a hard x-ray free-electron laser (XFEL) scenario based on the LCLS. In this case, we show by start-to-end simulations that the properties of this source may give rise to high efficiency operation of an XFEL, and permit extension of the photon energy reach by an order of magnitude, to over 80 keV. The brightness needed for such XFELs is achieved through low source emittances in tandem with high current after compression. In the XFEL examples analyzed, the emittances during final compression are preserved using microbunching techniques. Extreme low emittance scenarios obtained at pC charge, appropriate for significantly extending temporal resolution limits of ultrafast electron diffraction and microscopy experiments, are also reviewed. While the increase in brightness in a cryogenic photoinjector is mainly due to the augmentation of the emission current density via field enhancement, further possible increases in performance arising from lowering the intrinsic cathode emittance in cryogenic operation are also analyzed. Issues in experimental implementation, including cavity optimization for lowering cryogenic thermal dissipation, external coupling, and cryocooler system, are discussed. We identify future directions in ultrahigh field cryogenic photoinjectors, including scaling to higher frequency, use of novel rf structures, and enabling of an extremely compact hard x-ray FEL.

We present the design for a rapid proton energy modulator with radiofrequency accelerator cavities, which can deliver the proton radiation dose to varied depth in human tissues much faster than traditional mechanical beam energy degraders. The proton energy modulator is designed as a multi-cell 1-m long accelerator working at 2.856 GHz. Each individual accelerator cavity is powered by a 400 kW compact klystron to provide an accelerating/decelerating gradient of 30 MV/m. The high gradient is enabled by the individual power coupling regime, which provides a high shunt impedance. Beam dynamics simulations were performed, showing that the energy modulator can provide ±30 MeV of beam energy change for a 150 MeV, 7 mm long (full length) proton bunch, and the total energy spread of 3 MeV is satisfactory to clinical needs. A prototype experiment of a single cell has been built and tested, and the low-power microwave measurement results agree very well with simulations. The energy modulator is optimized for the 150 MeV cyclotron proton beam, while this approach can work with different beam energies.

Novel types of dual circular polarizer are developed to convert TE10 mode into two different polarized TE11 modes in a circular waveguide. These designs have MHz bandwidth and high power transmission capability.They can be used for broadcasting and receiving circular polarized signals.

We report the experimental demonstration of a mm-wave electron accelerating structure powered by a high-power rf source. We demonstrate reliable coupling of an unprecedented rf power—up to 575 kW into the mm-wave accelerator structure using a quasi-optical setup. This standing wave accelerating structure consists of a single-cell copper cavity and a Gaussian to TM01 mode converter. The accelerator structure is powered by 110 GHz, 10-ns long rf pulses. These pulses are chopped from 3 ms pulses from a gyrotron oscillator using a laser-driven silicon switch. We show an unprecedented high gradient up to 230 MV/m that corresponds to a peak surface electric field of more than 520 MV/m. We have achieved these results after conditioning the cavity with more than 105 pulses. We also report preliminary measurements of rf breakdown rates, which are important for understanding rf breakdown physics in the millimeter-wave regime. These results open up many frontiers for applications not only limited to the next generation particle accelerators but also x-ray generation, probing material dynamics, and nonlinear light-matter interactions at mm-wave frequency.

We show high power test progress for 110 GHz high-gradient accelerating structures. The purpose of this work is to study the physics of particle accelerators in the mm-wave regime, as well as ultrahigh vacuum RF breakdown in such structures. The setup under investigation consists of a single-cell standing-wave accelerating cavity operated in the n-mode and fed via the TMm mode in a circular waveguide, which is in turn fed through a Gaussian horn. The cavities will be powered with nanosecond pulses from a MW gyrotron oscillator, allowing it to reach a peak accelerating gradient of 400 MeV/m.

Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics studies relevant to X-ray FEL injectors, using start-to-end simulations that show the high brightness and low emittance of this source enables operation of a compact FEL reaching a photon energy of 80 keV. The preservation of beam brightness in compression, exploiting micro-bunching techniques is discussed. While the gain in brightness at high field is due to increase of the emission current density, further increases in brightness due to lowering of the intrinsic cathode emittance in cryogenic operation are also enabled. While the original proposal for this type of cryogenic, ultra-high field photoinjector has emphasized S-band designs, there are numerous potential advantages that may be conferred by operation in C-band. We examine issues related to experimental implementation in C-band, and expected performance of this type of device in a future hard X-ray FEL such as MaRIE., 10 pages, 5 figures, to appear in Proceedings of 2018 European Advanced Accelerator Conference, Nuclear Instruments and Methods

A new compact low-loss fast phase-shift high-power microwave (HPM) phase shifter (PS) is proposed, designed, and cold and high-power tested. Firstly, based on solving the scattering matrix and eigenvectors, we design a novel HPM dual circular polarizer, and then a dumbbell-like metal plug driven by a high-speed servomotor is used to slide a short circuit along the dual circular polarized port to adjust the output RF phase, which varies 180 $^{\circ}$ by moving the plug with a quarter of the guided wavelength. The X-band PS has a total length of 9.5 cm and a power capacity achieved 300 MW at 30-ns HPM pulse. A fast phase shift of 310 $^{\circ}$ was achieved within 0.1 s in test, a high precision of phase shift 1 $^{\circ}$ can be realized, and the tested insertion loss was $ 0.15 dB.

We have successfully designed, fabricated, installed, and tested a super compact $X$-band SLAC Energy Doubler system at SLAC. It is composed of an elegant 3 dB coupler--mode converter--polarizer coupled to a single spherical energy storage cavity with high ${Q}_{0}$ of 94000 and a diameter less than 12 cm. The available rf peak power of 50 MW can be compressed to a peak average power of more than 200 MW in order to double the kick for the electron bunches in a rf transverse deflector system and greatly improve the measurement resolution of both the electron bunches and the x-ray free-electron laser pulses. The design physics and fabrication as well as the measurement results will be presented in detail. High-power operation has demonstrated the excellent performance of this rf compression system without rf breakdown, sign of pulse heating, and rf radiation.

Traditional linear interaction RF sources (klystrons and traveling wave tubes) provide limited amounts of power at the mm-wave and terahertz part of the spectrum because their critical dimensions have to be small compared to the wavelength they operate. Due to these small dimensions, the amount of current that can go through the beam apertures is limited. We designed, built and hot-tested a new gyrocon-like mm-wave source, with an output interaction circuit based on a spherical sector cavity. This spherical sector cavity provides a large beam aperture, allowing for a significant amount of current to go through. This source operates as a 5th harmonic frequency multiplier, with an output frequency of 57.12 GHz. The measured peak output power was 54.26 W at the 5th harmonic, while power at the other harmonics was at least 33.28 dB lower than the 5th harmonic.

We are exploring the physics of vacuum rf breakdowns in high gradient metallic accelerating structures at sub-THz frequencies. We present the experimental results of rf tests performed in beam-driven travelling-wave accelerating structures. We measured the breakdown rates, the frequency of the emitted radiation, and the gradients. As the next step in this study, we are developing accelerating structures powered by an rf source. We report on the status of this project.

The use of infrared lasers to power optical-scale lithographically fabricated particle accelerators is a developing area of research that has garnered increasing interest in recent years. The physics and technology of this approach is reviewed, which is referred to as dielectric laser acceleration (DLA). In the DLA scheme operating at typical laser pulse lengths of 0.1 to 1 ps, the laser damage fluences for robust dielectric materials correspond to peak surface electric fields in the $\mathrm{GV}/\mathrm{m}$ regime. The corresponding accelerating field enhancement represents a potential reduction in active length of the accelerator between 1 and 2 orders of magnitude. Power sources for DLA-based accelerators (lasers) are less costly than microwave sources (klystrons) for equivalent average power levels due to wider availability and private sector investment. Because of the high laser-to-particle coupling efficiency, required pulse energies are consistent with tabletop microJoule class lasers. Combined with the very high (MHz) repetition rates these lasers can provide, the DLA approach appears promising for a variety of applications, including future high-energy physics colliders, compact light sources, and portable medical scanners and radiative therapy machines.

A novel type of dual circular polarizer for simultaneously receiving and transmitting right-hand and left-hand circularly polarized waves is developed and tested. It consists of a H-plane T junction of rectangular waveguide, one circular waveguide as an E- plane arm located on top of the junction, and two metallic pins used for matching. The theoretical analysis and design of the three-physical- port and four-mode polarizer were researched by solving Scattering- Matrix of the network and using a full-wave electromagnetic simulation tool. The optimized polarizer has the advantages of a very compact size with a volume smaller than 0:6‚ 3 , low complexity and manufacturing cost. A couple of the polarizer has been manufactured and tested, and the experimental results are basically consistent with the theories.

This paper explores the physics of vacuum rf breakdowns in subterahertz high-gradient traveling-wave accelerating structures. We present the experimental results of rf tests of 200 GHz metallic accelerating structures, made of copper and copper-silver. These experiments were carried out at the Facility for Advanced Accelerator Experimental Tests (FACET) at the SLAC National Accelerator Laboratory. The rf fields were excited by the FACET ultrarelativistic electron beam. The traveling-wave structure is an open geometry, 10 cm long, composed of two halves separated by a gap. The rf frequency of the fundamental accelerating mode depends on the gap size and can be changed from 160 to 235 GHz. When the beam travels off axis, a deflecting field is induced in addition to the longitudinal field. We measure the deflecting forces by observing the displacement of the electron bunch and use this measurement to verify the expected accelerating gradient. Furthermore, we present the first quantitative measurement of rf breakdown rates in 200 GHz metallic accelerating structures. The breakdown rate of the copper structure is 10^{-2} per pulse, with a peak surface electric field of 500 MV/m and a rf pulse length of 0.3 ns, which at a relatively large gap of 1.5 mm, or one wavelength, corresponds to an accelerating gradient of 56 MV/m. For the same breakdown rate, the copper-silver structure has a peak electric field of 320 MV/m at a pulse length of 0.5 ns. For a gap of 1.1 mm, or 0.74 wavelengths, this corresponds to an accelerating gradient of 50 MV/m.

Permanent magnet insertion devices (IDs), which are the main radiation generating devices in synchrotron light sources and free-electron lasers, use a time-invariant but space-periodic magnetic field to wiggle relativistic electrons for short-wavelength radiation generation. Recently, a high power microwave based undulator has also been successfully demonstrated at SLAC which promises the advantage of dynamic tunability of radiation spectrum and polarization. Such IDs employ transverse elecromagnetic fields which are periodic in both space and time to undulate the electrons. In this paper we develop a detailed theory of the principle of electromagnetic IDs from first principles for both linear and circular polarization modes. The electromagnetic equivalent definitions of undulator period (${\ensuremath{\lambda}}_{u}$) and undulator deflection parameter ($K$) are derived. In the inertial frame where the average momentum of the electron is zero, we obtain the figure-8-like trajectory for the linear polarization mode and the circular trajectory for the circular polarization mode. The corresponding radiation spectra and the intensity of harmonics is also calculated.

A new design of dual circular polarizer is presented in this paper. This innovative design converts radiofrequency (rf) energy from TE10 mode in a rectangular waveguide to two polarized TE11 modes in a circular waveguide. A reflection less than $\ensuremath{-}20\text{ }\text{ }\mathrm{db}$ is achieved and breakdown field is less than $42\text{ }\text{ }\mathrm{MV}/\mathrm{m}$ at input of 1 MW. Meanwhile, this polarizer has a megahertz bandwidth, and the thermal stability is also discussed. This device can be used for broadcasting and receiving the circular polarized signals.

Vacuum electronic devices, such as rf sources for accelerator applications, must provide high rf power with high efficiency. To achieve these requirements, multi-beam klystron and sheet-beam klystron devices have been developed. Multi-beam klystrons, at high frequency employ separate output cavities; hence they have the disadvantage that combining externally all the rf pulses is challenging. Sheet-beam klystrons have problems with instabilities and with space charge forces that makes the beam not naturally confined. We are proposing an alternative approach that reduces space charge problems, by adopting geometries in which the space charge forces are naturally balanced. In this paper we will present the design and challenges of a radial klystron, composed by concentric pancake resonant cavities. In this case, space charge forces are naturally balanced in the azimuthal direction.

This report is a survey of technical options for generating a MeV-class accelerator for space based science applications. The survey was performed focusing on the primary technical requirements of the accelerator in the context of a satellite environment with its unique challenges of limited electrical power (PE), thermal isolation, dimensions, payload requirement and electrical isolation.

This paper explores a hybrid mode rf structure that served as a superconducting radio-frequency coupler. This application achieves a reflection ${\mathrm{S}}_{(1,1)}$ varying from 0 to $\ensuremath{-}30\text{ }\text{ }\mathrm{db}$ and delivers cw power at 7 KW. The coupler has good thermal isolation between the 2 and 300 K sections due to vacuum separation. Only one single hybrid mode can propagate through each section, and no higher order mode is coupled. The analytical and numerical analysis for this coupler is given and the design is optimized. The coupling mechanism to the cavity is also discussed.

We present the applications of advanced RF acceleration to X-ray sources. We give an overview of high-gradient research activities and its applications to extremely high brightness electron guns and short period rf undulators. Article not available.

We report on the development of W-band (75–110 GHz) heterodyne receiver technology for large-format astronomical arrays. The receiver system is designed to be both mass producible, so that the designs could be scaled to thousands of receiver elements, and modular. Most of the receiver functionality is integrated into compact monolithic microwave integrated circuit (MMIC) amplifier-based multichip modules. The MMIC modules include a chain of InP MMIC low-noise amplifiers, coupled-line bandpass filters, and sub-harmonic Schottky diode mixers. The receiver signals will be routed to and from the MMIC modules on a multilayer high-frequency laminate, which includes splitters, amplifiers, and frequency triplers. A prototype MMIC module has exhibited a band-averaged noise temperature of 41 K from 82 to 100 GHz and a gain of 29 dB at 15 K, which is the state-of-the-art for heterodyne multichip modules.

We propose to couple two coaxial waveguides by 2D periodic perforation in the common wall in order to ensure selective coupling between two waves propagating in these waveguides. In the experiment at a frequency of 10 GHz, the H 01 mode of the internal waveguide was converted to the rotating H 51 mode of the external waveguide with a power loss of several percent.

We report cryogenic noise temperature and gain measurements of a prototype heterodyne receiver module designed to operate in the atmospheric window centered on 150 GHz. The module utilizes monolithic microwave integrated circuit (MMIC) InP high electron mobility transistor (HEMT) amplifiers, a second harmonic mixer, and bandpass filters. Swept local oscillator (LO) measurements show an average gain of 22 dB and an average noise temperature of 87 K over a 40 GHz band from 140 to 180 GHz when the module is cooled to 22 K. A spot noise temperature of 58 K was measured at 166 GHz and is a record for cryogenic noise from HEMT amplifiers at this frequency. Intermediate frequency (IF) sweep measurements show a 20 GHz IF band with less than 94 K receiver noise temperature for a fixed LO of 83 GHz. The compact housing features a split-block design that facilitates quick assembly and a condensed arrangement of the MMIC components and bias circuitry. DC feedthroughs and nano-miniature connectors also contribute to the compact design, so that the dimensions of the moduleare approximately 2.5 cm per side.

A new compact and wide-band waveguide dual circular polarizer at Ka-band is presented and tested in this paper. This compact structure is composed of a three-port polarizing diplexer and a circular polarizer realized by a simple pair of large grooves. The polarizing diplexer includes two rectangular waveguides with a perpendicular H-plane junction, one circular waveguide coupled in E- plane. A cylindrical step and two pins are used to match this structure. For a LHCP or RHCP wave in the circular port, only one speciflc rectangular port outputs power and the other one is isolated. The accurate analysis and design of the circular polarizer are conducted by using full-wave electromagnetic simulation tools. The optimized dual circular polarizer has the advantage of compact size with a volume smaller than 1.5‚ 3 , broad bandwidth, uncomplicated structure, and is especially suitable for use at high frequencies such as Ka-band and above. The prototype of the polarizer has been manufactured and test, the experimental results are basically consistent with the theories.

A fundamental element of the CLIC concept is two-beam acceleration, where RF power is extracted from a high current, low energy drive beam in order to accelerate the low current main beam to high energy. The CLIC Power Extraction and Transfer Structure (PETS) is a passive microwave device in which bunches of the drive beam interact with the constant impedance of the periodically loaded waveguide and excite preferentially the synchronous mode. The RF power produced is collected downstream of the structure by means of the RF power extractor; it is delivered to the main linac using the waveguide network connecting the PETS to the main CLIC accelerating structures. The PETS should produce 135 MW at 240 ns RF pulses at a very low breakdown rate: BDR < 10{sup -7}/pulse/m. Over 2010, a thorough high RF power testing program was conducted in order to investigate the ultimate performance and the limiting factors for the PETS operation. The testing program is described and the results are presented.

Fabrication technologies for X-band high gradient accelerating structures have been studied at KEK with SLAC, INFN and CERN. A scanning field emission microscope has been developed at KEK for the observation of the microscopic surface defects which may be related to the rf breakdown trigger. We present the progress on the experimental results of studying field emission characteristics by scanning an arbitrary area of 0.5 mm×0.5 mm on OFHC copper surface using a newly developed scanning field emission microscope.

We summarize recent progress in a program to develop externally powered dielectric-loaded accelerating (DLA) structures that can sustain high accelerating gradients. High-power RF tests of earlier structures showed strong multipactor loading. In addition, arcing at dielectric joints between the uniform DLA structure and matching sections at either end limited the achievable gradient. In this paper, we study the onset of multipactor in a DLA structure. We also study the effect of thin-film TiN coatings applied by atomic layer deposition and the effect of a reduction in the inner diameter of the structure. Test results of these structures show significant decreases in multipactor loading. We also test new structure designs that eliminate separate dielectric matching sections and, thus, the requirement for dielectric joints, including a DLA structure using a coaxial coupler and a clamped DLA structure. The clamped structure demonstrated a significantly improved gradient without breakdown.

Magnesium diboride (MgB2) has a transition temperature of (Tc) ~40 K, i.e., about 4 times as high as that of niobium (Nb). We have been evaluating MgB2 as a candidate material for radio-frequency (RF) cavities for future particle accelerators. Studies in the last 3 years have shown that it could have about one order of magnitude less RF surface resistance (Rs) than Nb at 4 K. A power dependence test using a 6 GHz TE011 mode cavity has shown little power dependence up to ~12 mT (120 Oe), limited by available power, compared to other high- materials such as YBCO. A recent study showed, however, that the power dependence of Rs is dependent on the coating method. A film made with on-axis pulsed laser deposition (PLD) has showed rapid increase in compared to the film deposited by reactive evaporation method. This paper shows these results as well as future plans.

Purpose: To measure radiation dose in a water-equivalent medium from very high-energy electron (VHEE) beams and make comparisons to Monte Carlo (MC) simulation results. Methods: Dose in a polystyrene phantom delivered by an experimental VHEE beam line was measured with Gafchromic films for three 50 MeV and two 70 MeV Gaussian beams of 4.0–6.9 mm FWHM and compared to corresponding MC-simulated dose distributions. MC dose in the polystyrene phantom was calculated with the EGSnrc/BEAMnrc and DOSXYZnrc codes based on the experimental setup. Additionally, the effect of 2% beam energy measurement uncertainty and possible non-zero beam angular spread on MC dose distributions was evaluated. Results: MC simulated percentage depth dose (PDD) curves agreed with measurements within 4% for all beam sizes at both 50 and 70 MeV VHEE beams. Central axis PDD at 8 cm depth ranged from 14% to 19% for the 5.4–6.9 mm 50 MeV beams and it ranged from 14% to 18% for the 4.0–4.5 mm 70 MeV beams. MC simulated relative beam profiles of regularly shaped Gaussian beams evaluated at depths of 0.64 to 7.46 cm agreed with measurements to within 5%. A 2% beam energy uncertainty and 0.286° beam angular spread corresponded to a maximum 3.0% and 3.8% difference in depth dose curves of the 50 and 70 MeV electron beams, respectively. Absolute dose differences between MC simulations and film measurements of regularly shaped Gaussian beams were between 10% and 42%. Conclusions: The authors demonstrate that relative dose distributions for VHEE beams of 50–70 MeV can be measured with Gafchromic films and modeled with Monte Carlo simulations to an accuracy of 5%. The reported absolute dose differences likely caused by imperfect beam steering and subsequent charge loss revealed the importance of accurate VHEE beam control and diagnostics.

The radial klystron is a multi-dimensional rf source where the beam is generated by a cylindrical gun and it expands along the radial dimension. The space charge repulsion forces are balanced in the azimuthal direction. We present the design of a low-voltage klystron, showing the single cavity stability and high efficiency.

Progress on the development of a 5MW 16 beam x-band multi-beam klystron is presented. The power from each of the 16 klystrons is combined using a matched waveguide network. Mechanical and electric models and simulations are discussed. The status of procuring and assembling parts is presented.

Future Linear Colliders and Accelerators require rf systems and components that are capable of handling hundreds of megawatts power levels at x-band frequencies and higher. Standard rf components that have been in use for a long time such as waveguide bends, directional couplers and hybrids, can not be used because of peak field considerations. Indeed, one has to reinvent most of these components taking into account the constraints imposed by ultra-high-power operation. Here, we present a new design for circular waveguides bends propagating the low-loss TE01 mode. The bend has smooth walls and low field levels. We present a simple synthesis process for designing such a device. The general philosophy of this technique can be applied to other components as well. We describe the detailed design of the bend and compare our design with finite element simulations and experimental data. The bend has very low ohmic losses, and the TE01 mode is transmitted with virtually perfect mode purity.

Purpose: We have experimentally characterized and simulated the dosimetric properties and spatial fidelity of a novel X-ray array source and collimation system called SPHINX that has the potential to generate complex intensity modulated X-ray beams by varying the electron beam intensity only, and without any moving parts like in multi-leaf collimators. Methods: We investigated the spatial fidelity and the X-ray performances of a SPHINX prototype in tungsten, using a Cyber Knife and the experimental high-energy electron beam line at XTA at SLAC National Laboratory. Dose distributions were recorded with gafchromic films, placed at the distal end of SPHINX and at several depths in a solid water phantom. The geometry of SPHINX and of the experimental set-ups was also modeled in Monte Carlo (MC) simulations with the FLUKA code, used to reproduce the experimental results and, after validation, to predict and optimize the performance and design of the SPHINX. Results: The results indicate significant particle leakage through the channels during a single-channel irradiation for high incident energies, followed by a rapid decrease for energies of clinical interest. When the collimator channels are used as target, the photon production increases, however at expense of the beam size that is also enlarged. The illumination of all channels simultaneously shows a fairly even transmission of the beam. Conclusion: With the measurements we have verified the MC models and the uniformity of beam transmission through SPHINX, and we have evaluated the importance of particle leakage through adjacent channels. These results can be used to optimize SPHINX design through the validated MC simulations. Funding: Weston Havens Foundation, Office of the Dean of Medical School and Office of the Provost (Stanford University). Loo, Maxim, Borchard, Tantawi are co-founders of TibaRay Inc. Loo and Tantawi are TibaRay Inc. board members. Loo and Maxim received grants from Varian Medical Systems and RaySearch Laboratory.

In this paper, we discuss a new compact converter, which converts the TE/sub 01/ circular mode into the TE/sub 20/ rectangular mode. Compared to the Marie converter, the new device has a significantly shorter length and is, therefore, more suitable for use in evacuated waveguide systems. Both the design efforts and the experimental testing of the prototype are described. Based on computer simulations, this converter has a center frequency of 17.15 GHz, and the predicted power transfer between the desired modes is 99.9%. Results from the low-power testing of the prototype indicate that when the TE/sub 20/ output mode is split into two equal parts (each in the TE/sub 10/ rectangular mode), the power transferred to each arm of the split differs by less than 0.15 dB over a 200-MHz bandwidth. This is the first experimental study of a converter based on this design. A high-power version of this device is now being fabricated for use under high vacuum conditions.

We report the experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum electronic device, which uses an over-moded spherical sector output cavity. In this device, a pencil electron beam is helically deflected in a transverse deflecting cavity before entering the output cavity. No magnetic field is required to focus or guide the beam. We built and tested a proof-of-principle device with an output frequency of 57.12 GHz. The measured peak power was 52.67 W at the 5th harmonic of the drive frequency. Power at the 4th, 6th, and 7th harmonics was 33.28 dB lower than that at the 5th harmonic.

Magnesium diboride (MgB2) is a promising candidate material for superconducting radio frequency (RF) cavities because of its higher transition temperature and critical field compared with niobium. To meet the demand of RF test devices, the fabrication of large-area MgB2 films on metal substrates is needed. In this work, high quality MgB2 films with 50 mm diameter were fabricated on niobium by using an improved HPCVD system at Peking University, and RF tests were carried out at SLAC National Accelerator Laboratory. The transition temperature is approximately 39.6 K and the RF surface resistance is about 120 μΩ at 4 K and 11.4 GHz. The fabrication processes, surface morphology, DC superconducting properties and RF tests of these large-area MgB2 films are presented.

A design for a compact x-ray light source (CXLS) with flux and brilliance orders of magnitude beyond existing laboratory scale sources is presented. The source is based on inverse Compton scattering of a high brightness electron bunch on a picosecond laser pulse. The accelerator is a novel high-efficiency standing-wave linac and rf photoinjector powered by a single ultrastable rf transmitter at X-band rf frequency. The high efficiency permits operation at repetition rates up to 1 kHz, which is further boosted to 100 kHz by operating with trains of 100 bunches of 100 pC charge, each separated by 5 ns. The entire accelerator is approximately 1 meter long and produces hard x rays tunable over a wide range of photon energies. The colliding laser is a Yb∶YAG solid-state amplifier producing 1030 nm, 100 mJ pulses at the same 1 kHz repetition rate as the accelerator. The laser pulse is frequency-doubled and stored for many passes in a ringdown cavity to match the linac pulse structure. At a photon energy of 12.4 keV, the predicted x-ray flux is 5×10[superscript 11] photons/second in a 5% bandwidth and the brilliance is 2 × 10[superscript 12] photons/(sec mm[superscript 2] mrad[superscript 2] 0.1%) in pulses with rms pulse length of 490 fs. The nominal electron beam parameters are 18 MeV kinetic energy, 10 microamp average current, 0.5 microsecond macropulse length, resulting in average electron beam power of 180 W. Optimization of the x-ray output is presented along with design of the accelerator, laser, and x-ray optic components that are specific to the particular characteristics of the Compton scattered x-ray pulses., United States. Defense Advanced Research Projects Agency (Grant N66001-11-1-4192), National Science Foundation (U.S.) (Grant DMR-1042342), United States. Dept. of Energy (Grant DE-FG02-10ER46745), United States. Dept. of Energy (Grant DE-FG02-08ER41532), Center for Free-Electron Laser Science