Search

Inflammatory pseudotumor (IPT) is a rare benign tumor of unknown etiology that can occur in almost any organ system. It has neoplastic features such as local recurrence, invasive growth, and vascular invasion, leading to the possibility of malignant sarcomatous changes. The clinical presentations of colonic IPT may include abdominal pain, anemia, a palpable mass, and intestinal obstruction. A few cases of colonic IPT have been reported, but colonic IPT with pedunculated morphology is very rare. Furthermore, since it can mimic malignant polyps, understanding the endoscopic findings of colonic IPT is important for proper treatment. Herein, we present a case of colonic IPT with pseudosarcomatous changes, presenting as a large polyp, mimicking a malignant polyp in the cecum, along with a literature review.

In this paper, we fabricate planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and the planar-type SOHOS devices with N2 implantation of 3 x 10(15) dose in a tunneling oxide to determine the impact of N2 implantation in the tunneling oxide of a memory device. The N2 implantation device has better retention characteristics than the device with no implantation. In order establish the correlation between N2 implantation and retention characteristic improvement, the low frequency noise (1/f noise) characteristic is investigated. The normalized drain current noise (S(ID)/I(D)2) level of the N2 implantation device is higher than that of the device with no implantation, which means that N2 implantation causes more trap formation near the interface. Considering that N2 implantation does not affect the DC transfer characteristics, such as mobility and sub-threshold slope, this finding indicates that the increase in the 1/f noise level is due to oxide traps rather than to interface traps. Therefore, the retention characteristic improvement in the N2 implantation device can be explained by the generation of higher number of oxide traps and an increase in the potential barrier blocking the leakage path in the tunneling oxide.

Daily use of probiotic chewing gum might have a beneficial effect on oral health, and it is important that the viability of the probiotics be maintained in this food product. In this study, we examined the stability of probiotic chewing gum containing Weissella cibaria. We evaluated the effects of various factors, including temperature and additives, on the survival of freeze-dried probiotic W. cibaria powder. No changes in viability were detected during storage at 4℃ for 5 months, whereas the viability of bacteria stored at 20℃ decreased. The stability of probiotic chewing gum decreased steadily during storage at 20℃ for 4 weeks. The viability of the freeze-dried W. cibaria mixed with various additives, such as xylitol, sorbitol, menthol, sugar ester, magnesium stearate, and vitamin C, was determined over a 4-week storage period at 20℃. Most of the freeze-dried bacteria except for those mixed with menthol and vitamin C were generally stable during a 3-week storage period. Overall, our study showed that W. cibaria was more stable at 4℃ than that at 20℃. In addition, menthol and vitamin C had a detrimental effect on the storage stability of W. cibaria. This is the first study to examine the effects of various chewing gum additives on the stability of W. cibaria. Further studies will be needed to improve the stability of probiotic bacteria for developing a novel probiotic W. cibaria gum.

Wind power, which is one of the promising renewable energies, has shown the high growth rate of 35 % of the annual average in the recent 5 years and also windmill related equipment market has been fast-growing. Yaw & Pitch bearing are the key parts of windmill and are machined by huge vertical lathe which is monopolized by the advanced countries. The purpose of this study is to develop the multi-tasking vertical lathe for 5 MW grade windmill bearings, which might be mass produced 3 or 5 years later. In this study, the structure of the crossrail and rotary table, which are the key units of the huge multi-tasking vertical lathe, were optimized through the finite element analysis. Also the basic performance of the rotary table has been evaluated.

In the present work, vibration control performance of piezoactuator-based active mount system for unmanned aero vehicle(UAV) equipment is evaluated via hardware in the loop simulation(HILS). At first, the vibration level of UAV is measured and from this vibration data, the proper piezostack actuator is selected. Then, the dynamic model of active mount system including four active mounts and UAV camera equipment is derived. In order to evaluate vibration control performance, the HILS system is constructed. The proposed mount is prepared as hardware part and the other mounts are considered in software part. A sliding mode controller is designed and implemented to the HILS system. Effective vibration control results are presented in both time and frequency domains.

In the present work, vibration control performance of active camera mount system for unmanned aero vehicle(UAV) is evaluated. An active mount featuring inertia type of piezostack actuator is designed and manufactured. Then, vibration control performances are experimentally evaluated. A camera mount system with four active mounts is constructed and mechanical model is established. The governing equation for the camera mount system is obtained and control model is constructed in state space model. Sliding mode controller which has inherent robustness to external disturbance is designed and implemented to the system. Vibration control performances are evaluated at each mount and center of gravity point. Effective vibration performances are obtained and presented in time and frequency domains.

We propose and demonstrate weak-microcavity organic light-emitting diode (OLED) displays with improved light-extraction and viewing-angle characteristics. A single pair of low- and high-index layers is inserted between indium tin oxide (ITO) and a glass substrate. The electroluminescent (EL) efficiencies of discrete red, green, and blue weak-microcavity OLEDs are enhanced by 56%, 107%, and 26%, respectively, with improved color purity. Moreover, full-color 128×160 passive-matrix bottom-emitting OLED displays are fabricated by employing low-index layers of two thicknesses. As a display, the EL efficiency of white color was 27% higher than that of a conventional OLED display.

Background: Asthma is a major health problem worldwide, and the morbidity and mortality caused by asthma are on the rise. Corticosteroid therapies for asthma treatment frequently induce many side effects. Therefore, the development of new medicines that have both high efficacy and fewer side effects has been a scientific challenge. Here we tested the effect of ginsan, a polysaccharide derived from Panax ginseng, against allergic reaction in an ovalbumin (OVA)-induced murine asthmatic model in comparison with dexamethasone, and investigated its underlying mechanism. Methods: To induce murine asthma, mice were sensitized and challenged with OVA. Ginsan or dexamethasone was administered by injection 3 times a week. Airway hyperresponsiveness, airway inflammation and lung pathology were assessed in order to evaluate the effect of ginsan against asthma. Results: Ginsan treatment reduced airway hyperresponsiveness, remodeling and eosinophilia. These effects of ginsan were equivalent to those of dexamethasone. Ginsan treatment decreased the IL-5 level in the supernatant of cultured splenocytes, while IFN-γ and serum IgE were not altered. To elucidate the mechanism of ginsan, expression of inflammation-related genes were screened. Interestingly, ginsan treatment upregulated cyclooxygenase (COX)-1 and COX-2 mRNA, and expression of their proteins in the lung were also increased. PGE2 in the bronchoalveolar lavage fluid was also increased by the ginsan treatment. Lastly, ginsan inhibited the allergic reaction aggravated by COX inhibitor (indomethacin). Conclusion: Ginsan has anti-asthmatic effects, which seem to be partially mediated by enhancing the synthesis of COX gene products.

The water-extractable component of snuff (snuff extract) inhibits the replication of herpes simplex virus (HSV) by suppressing the synthesis of viral DNA. This process probably causes HSV to be oncogenic. To further understand the mechanism of inhibitory action of snuff extract on HSV replication, the effect of snuff extract on the synthesis of viral DNA and proteins in type 1 HSV (HSV-1) infected cells was investigated. Snuff extract inhibited the synthesis of viral DNA and altered the production of certain classes of viral proteins. The syntheses of ICP4, a viral alpha-protein, and ICP8, a beta-protein, were not generally reduced by noncytotoxic concentrations of snuff extract (where ICP = infected cell polypeptide). However, snuff extracts significantly inhibited the production of ICP gC (glycoprotein C), a gamma 2-protein, and the inhibition was in a concentration-dependent fashion: the higher the concentration of snuff extracts, the greater the inhibition. Based on the fact that the production of alpha- and beta-proteins is absolutely necessary for and precedes the viral DNA synthesis and that viral gamma 2-proteins are mostly produced by the newly synthesized viral DNA, it is concluded that snuff extract inhibits HSV-1 DNA replication directly rather than indirectly via the alteration of viral protein synthesis.

This study examined salivary flow and salivary pH and the prevalence and levels of cariogenic bacteria in the saliva of oncological patients and healthy controls. Quantitative real-time polymerase chain reaction was used to assess the levels of microbes including Streptococcus mutans, Streptococcus sobrinus, Lactobacillus salivarius, and Lactobacillus acidophilus in the saliva of 41 patients with a solid tumor (SO), 30 patients with a hematologic malignancy (HE), and 40 healthy controls. Salivary flow and pH were lower in oncological patients than in controls. The frequencies of all four cariogenic bacteria were highest in the SO group. S. mutans and L. salivarius were the most commonly detected in all three study groups. Mean numbers of S. sobrinus and L. salivarius in the SO group were significantly higher than in controls (p