Search

The ligamentum flavum (LF), the inter- and supraspinous ligament (ISLSSL) and the intertransverse ligament (ITL) are relevant spinal structures for segmental stability. The biomechanical effect of degeneration and aging on their biomechanical properties remains largely unknown.The aim of this study was to assess the material properties of the ITL, ISLSSL and LF and to correlate parameters of biomechanical function with LF-thickness, intervertebral disc (IVD) degeneration and age.Biomechanical cadaveric study.MRI- and CT-scans of 50 human lumbar segments (Th12-L5) were used to assess the ISL (acc. to Keorochana), the grade of IVD degeneration (acc. to Pfirrmann) and to quantify LF-thickness. The ITL, ISLSSL and LF were resected in the neutral position of the spinal segment with a specifically developed method to conserve initial strain. Ramp to failure testing was performed (0.5 mm/s) to record initial tension, slack length, stiffness and ultimate strength. The relationship between the biomechanical characteristics and age and radiological parameters were analyzed. There are no study-specific conflicts of interest and no external funding was received for this study.With aging, a significant reduction in initial tension (r=-0.5, p.01) and ultimate strength (r=-0.41, p.01) of the LF was observed, while the effect on LF-stiffness and the characteristics of the other ligaments was non-significant. IVD-degeneration was correlated with a significant reduction in stiffness (r=-0.47, p=.001; r=-0.36, p=.01) and ultimate strength (r=-0.3, p=.04; r=-0.36, p=.01) of the LF and ISLSSL respectively and a significant reduction in initial tension (r=-0.4, p.01) of the LF. For the ITL, no significant correlation was observed. Comparing Pfirrman 2 to 5, this reduction was 40% to 80% for stiffness 60% to 70% for ultimate strength and 88% for initial tension of the LF. ISLSSL-stiffness between Kerorochana grade A and D differed significantly (p=.03), while all other comparisons were non-significant (p.05). LF-thickness did not correlate with the biomechanical properties of the LF (p.05).Aging is primarily related to biomechanical changes to the LF. IVD-degeneration is related to a relevant reduction in stiffness and ultimate strength of the LF and ISLSSL, with a similar trend for the ITL. The ISL-specific Keorochana grading system provides only minimal biomechanical information and LF-thickness does not provide biomechanical information.Patient age and the degenerative state of the IVD can be used to evaluate the biomechanical characteristics of the dorsal spinal ligaments, which can be helpful in selecting the optimal surgical procedure (e.g. in decompression surgery) for a specific situation.

The cortical bone trajectory (CBT) is an alternative to the traditional pedicle screw trajectory (TT) in posterior spinal instrumentation, enhancing screw contact with cortical bone and therefore increasing fixation strength. Additional to the trajectory, insertion depth (pericortical vs. bicortical placement) could be a relevant factor affecting the fixation strength. However, the potential biomechanical benefit of a bicortical placement of CBT screws is unknown. Therefore, the aim of this study was to quantify the fixation strength of pericortical- versus bicortical-CBT (pCBT versus bCBT) screws in a randomized cadaveric study. Pedicle screws were either placed pericortical or bicortical with a CBT in 20 lumbar vertebrae (2 × 20 instrumented pedicles) from four human spine cadavers by using patient-specific templates. Instrumented specimens underwent physiological cyclic loading testing (1′800′000 cycles, 10 Hz), including shear and tension loads as well as bending moments. Translational and angular displacements of the screws were quantified and compared between the two techniques. There was a slight decrease in translational (0.2 mm ± 0.09 vs. 0.24 mm ± 0.11) and angular displacements (0.06° ± 0.05 vs. 0.13° ± 0.11) of bCBT screws when compared with pCBT screws after 1′800′000 cycles. However, the results were non-significant (p > 0.05). The authors do not recommend placing CBT screws bicortically, as no relevant biomechanical advantage is gained while the potential risk for iatrogenic injury to structures anterior to the spine is increased.

Purpose Dorsal screw-rod instrumentations are used for a variety of spinal disorders. Cross-links (CL) can be added to such constructs, however, no clear recommendations exist. This study aims to provide an overview of the available evidence on the effectiveness of CL, potentially allowing to formulate recommendations on their use. Methods A systematic literature review was performed on PubMed and 37 original articles were included and grouped into mechanical, biomechanical, finite element and clinical studies. The change in range of motion (ROM) was analyzed in mechanical and biomechanical studies, ROM, stiffness and stress distribution were evaluated in finite element studies and clinical outcome parameters were analyzed in clinical studies. Results A relative consistent reduction in ROM in axial rotation with CL-augmentation was reported, while minor and less consistent effects were observed in flexion–extension and lateral bending. The use of CLs was clinical beneficial in C1/2 fusion, while the limited clinical studies on other anatomic regions show no significant benefit for CL-augmentation. Conclusion While CL provides some additional axial rotation stability in most situations, lateral bending and flexion–extension are less affected. Based on clinical data, CL-augmentation can only be recommended for C1/2 instrumentations, while for other cases, further clinical studies are needed to allow for evidence-based recommendations., European Spine Journal, 3 (1), ISSN:0940-6719, ISSN:1432-0932, ISSN:001991155

Background Context The contribution of anatomical structures to the stability of the spine is of great relevance for diagnostic, prognostic and therapeutic evaluation of spinal pathologies. Although a plethora of literature is available, the contribution of anatomical structures is still not well understood. Purpose We aimed to quantify the biomechanical relevance of each of the passive spinal structure trough deliberate biomechanical test series using a stepwise reduction approach on cadavers. Study design Biomechanical cadaveric study. Methods Fifty lumbar spinal segments originating from 22 human lumbar cadavers were biomechanically tested in a displacement-controlled stepwise reduction study: the intertransverse ligaments, the supraspinous and interspinous ligaments, the facet joint capsules (FJC), the facet joints (FJ), the ligamentum flavum (LF), the posterior longitudinal ligament (PLL), and the anterior longitudinal ligament were subsequently reduced. In the intact state and after each transection step, the segments were physiologically loaded in flexion, extension, axial rotation (AR), lateral bending (LB) and with anterior (AS), posterior (PS) and lateral shear (LS). Thirty-two specimens with only minor degeneration, representing a reasonably healthy subpopulation, were selected for the here presented evaluation. Quantitative values for load and spinal level dependent contribution patterns for the anatomical structures were derived. Results Small variability between of the contribution patterns are observed. The intervertebral disc (IVD) is exposed to about 67% of the applied load in LB and during shear loading, but less by load in flexion, extension and AR (less than 35%). The FJ&FJC are the main stabilizers in AR with 49%, but provide only 10% of the stability in extension. Beside the IVD, the LF and the PLL contribute mainly in flexion (22% and 16%, respectively), while the ALL plays a major role during extension (40%) and also contributes during LB (15%). The contribution of the intertransverse ligaments and the supraspinous and interspinous ligaments are very small in all loading directions ( Conclusion The IVD takes the main load in LB and absorbs shear loading, while the FJ&FJC stabilize AR. The ALL resists extension while LF and PLL stabilize flexion. With the small variability of contribution patterns, suggesting distinct adaptation of the structures to one another, the biomechanical characteristics of one structure have to be put in context of the whole spinal segment. CLINICAL SIGNIFICANCE The novel information on load distribution helps predict the biomechanical consequences of surgical procedures in more detail.

Background Posterior lumbar instrumentation requires sufficient primary stiffness to ensure bony fusion and to avoid pseudarthrosis, screw loosening, or implant failure. To enhance primary construct stiffness, transverse cross-link (CL) connectors attached to the vertical rods can be used. Their effect on the stability of a spinal instrumentation with simultaneous decompression is yet not clear. This study aimed to evaluate the impact of CL augmentation on single-level lumbar instrumentation stiffness after gradual decompression procedures. Methods Seventeen vertebral segments (6 L1/2, 6 L3/4, 5 L5/S1) of 12 fresh-frozen human cadavers were instrumented with a transpedicular screw–rod construct following the traditional pedicle screw trajectory. Range of motion (ROM) of the segments was sequentially recorded before and after four procedures: (A) instrumented before decompression, (B) instrumented after unilateral laminotomy, (C) instrumented after midline bilateral laminotomy, and (D) instrumented after unilateral facetectomy (with transforaminal lumbar interbody fusion [TLIF]). Each test was performed with and without CL augmentation. The motion between the cranial and caudal vertebrae was evaluated in all six major loading directions: flexion/extension (FE), lateral bending (LB), lateral shear (LS), anterior shear (AS), axial rotation (AR), and axial compression/distraction (AC). Results ROM was significantly reduced with CL augmentation in AR by Δ0.03–0.18° (7–12%) with a significantly higher ROM reduction after more extensive decompression. Furthermore, slight reductions in FE and LB were observed; these reached statistical significance for FE after facetectomy and TLIF insertion only (Δ0.15; 3%). The instrumentation levels did not reveal any subgroup differences. Conclusion CL augmentation reduces AR-ROM by 7–12% in single-level instrumentation of the lumbar spine, with the effect increasing along with the extensiveness of the decompression technique. In light of the discrete absolute changes, CL augmentation may be warranted for highly unstable vertebral segments rather than for standard single-level posterior spinal fusion and decompression.

Understanding spinal kinematics is essential, not only for the comprehension and diagnosis of spinal diseases, but also for improving modern tools and software. The sheer volume and complexity of now available information can be overwhelming. We aimed to distil it into a form that facilitates comparison among diverse studies addressing spinal kinematics under healthy and degenerative conditions. We specifically aimed to define a baseline definition of the spectrum of normal spinal kinematics that in turn allows a comparable definition of kinematics of the degenerative lumbar spine. The considered data was obtained by a systematic MEDLINE search including studies on angular/translational segmental motion contribution, range of motion, coupling and center of rotation. As for degenerative conditions, we collected publications on disc degeneration, facet joint osteoarthritis, facet joint tropism, spondylolisthesis, ligament degeneration and paraspinal muscle degeneration. While we could demonstrate repeating motion patterns for some topics, agreement in other fields is limited due to methodological variances and small sample sizes, particularly in publications with highly accurate but complex techniques. Besides, the high frequency of concurrent degenerative processes complicates the association between diseases and subsequent kinematical changes. Despite several substantial gaps, we stand at the precipice of technological breakthroughs that can power future large-scale studies.

Hydrostatic integrity of the intervertebral disc (IVD) is lost during the process of degeneration. Invasive pressure profilometry (IPP) can quantify it, however, is not applicable for clinical use. We aimed to investigate correlations between IPP and MRI findings to assess non-invasive MRI based methods for prediction of hydrostatic integrity of the intervertebral disc. The pressure profiles of 39 lumbar spinal segments originating from 22 human cadavers were recorded during axial compression in the neutral, the flexed and the extended positions. Disc pressure profiles were measured and mathematically transformed to a novel metric that quantifies pressure profile heterogeneity across the disc. The relationship between pressure profile inhomogeneity (“pressure score”) and clinically established magnetic resonance-based classifications systems and demographic parameters was then tested using Spearman correlation tests. Pressure profile inhomogeneities were correlated with IVD degeneration (according to Pfirrmann, rho = 0.43, p = 0.006), endplate defects (according to Rajasekaran, rho = 0.39, p = 0.013), segmental degeneration (according to Farshad, rho = 0.41, p = 0.009) and age (rho = 0.32, p = 0.049). Modic changes per se did not affect the pressure profiles significantly (p = 0.23) and pressure scores did not correlate with BMI (rho = -0.21, p = 0.2). Heterogeneity of segmental IVD pressure profiles is a unique measure of disc function. We demonstrate that established clinical methods for MRI characterization of the intervertebral disc, the endplate and overall segmental degeneration all correlate with the hydrostatic integrity of the IVD and can be used for its assessment., Journal of Biomechanics, 127, ISSN:0021-9290, ISSN:1873-2380

Background Anterior scoliosis correction is a powerful technique with the disadvantage of a kyphotic effect on lumbar and thoracolumbar curves. We aimed to investigate whether a cognizant interposition of a rib graft anteriorly and at the concave side of the scoliotic curve causes significant fulcrum effect to enforce scoliosis correction and to reduce interfusional kyphosis in anterior scoliosis corrections. Methods Twenty otherwise comparable patients with lumbar and thoracolumbar adolescent idiopathic scoliosis (AIS) curves undergoing anterior short scoliosis correction with (n = 10) or without (n = 10, matched for age, gender and degree of deformity) fulcrum effect were retrospectively compared by means of radiographic measurements (sagittal and coronal profile, Cobb angles and intersegmental deformity correction angles) to evaluate the effect of this modified surgical technique. Results The overall amount of scoliosis correction was similar with 74 and 60% of initial curves of 57° and 53° in the case and control group respectively with a mean of 3 fused segments (4 screws). Statistically relevant differences were found for intersegmental coronal cobb angles at the apex of 20° to 3° and 17° to 9° with and without fulcrum, respectively (p, BMC Musculoskeletal Disorders, 22 (1), ISSN:1471-2474

Background Acetabular retroversion results in reduced range of motion, and is thought to contribute to femoroacetabular impingement. Severe retroversion can be corrected with a periacetabular osteotomy, which is a technically demanding intervention. In this study, we investigated whether increasing femoral antetorsion is a potential alternative to restore the range of motion and how this approach would affect hip joint loading. Methods Six different finite element models of the same subject were built from MRI and used to simulate different load scenarios during stance phase, including healthy and pathological configurations with different acetabular version and femoral torsion angles. The subject's gait was analysed in our gait lab and motion data as well as joint reaction forces were integrated into the model. Hip range of motion, hip abductor muscle forces as well as localization and magnitude of hip joint loads were determined. Findings The negative effects of acetabular retroversion on hip range of motion including flexion and internal rotation can be reversed by increasing femoral anteversion. The rotation of the femur furthermore affected muscular functionality by shortening the moment arms of the hip abductor muscles, resulting in increased abductor muscle forces, joint reaction forces and hip joint loading. Interpretation Even though increased femoral antetorsion can compensate for the loss of hip range of motion due to reduced acetabular version, rotational ostotomy of the proximal femur is likely to alter muscular moment arms and therefore increase hip joint load, conflicting the goal of a long-term healthy joint., Clinical Biomechanics, 87, ISSN:0268-0033, ISSN:1879-1271

The cortical bone trajectory (CBT) has been introduced with the aim of better screw hold, however, screw-rod constructs with this trajectory might provide less rigidity in lateral bending (LB) and axial rotation (AR) compared to the constructs with the traditional trajectory (TT). Therefore, the addition of a horizontal cross-connector could be beneficial in counteracting this possible inferiority. The aim of this study was to compare the primary rigidity of TT with CBT screw-rod constructs and to quantify the effect of cross-connector-augmentation in both. Spines of four human cadavers (T9 –L5) were cropped into 15 functional spine units (FSU). Eight FSUs were instrumented with TT and seven FSUs with CBT pedicle screws. The segments were tested in six loading directions in three configurations: uninstrumented, instrumented with and without cross-connector. The motion between the cranial and caudal vertebra was recorded. The range of motion (ROM) between the CBT and the TT group did not differ significantly in either configuration. Cross-connector -augmentation did reduce the ROM in AR (16.3%, 0.27°, p = 0.02), LB (2.9%, 0.07°, p = 0.03) and flexion-extension FE (2.3%, 0.04°, p = 0.02) for the TT group and in AR (20.6%, 0.31°, p = 0.01) for the CBT-group. The primary rigidity of TT and CBT single level screw-rod constructs did not show significant difference. The minimal reduction of ROM due to cross-connector-augmentation seems clinically not relevant. Based on the findings of these study there is no increased necessity to use a cross-connector in a CBT-construct., PLoS ONE, 16 (6), ISSN:1932-6203