Search

We present for the first time STT-MRAM devices with ultra low operating voltage and power compatible with next generation 0x node logic voltages. By engineering the tunnel barrier and improving the efficiency of the devices we report a record low writing voltage of 0.17V for a 1ppm error rate, which has been achieved for a 20ns write operation using a writing current of only 35uA. We further demonstrate error rates below 10-9 at voltage and current at 0.25V and 50uA using 10ns writing pulses on the same 30nm devices with extended 400C thermal budget while preserving functionality confirm the almost unlimited endurance of these data and retention at 85°C. Finally, TDDB studies confirm the almost unlimited endurance of these devices at the operating voltage.

We present recent advances in writing speed of pSTT_MRAM which demonstrate its potential as a candidate for replacement of LCC cache for advanced technology nodes as well as applications where non-volatility may be needed. In this paper we explore the feasibility of sub-ns switching of devices and their characterization using comprehensive time resolved electrical measurement of the reversal mechanism. We show that the switching mechanism can be described as a simple nucleation followed by propagation model that can be characterized statistically. We further demonstrate that after optimization of the Magnetic Tunnel Junction (MTJ) stack, single devices can be switched reliably using write pulse length down to 750ps while preserving functionality and data retention @ 125°C. Results of the integration at array level on an 8MB test vehicle are also presented allowing full array writing using 3ns pulses without ECC and demonstrated data retention of 10 years (1ppm) at 125°C.

STT-MRAM technology has been attracting renewed attention since the embedability of a working STT-MRAM design has been demonstrated [1]. In this paper we expand on the versatility of STT-MRAM by demonstrating the conversion of a standard STT-MRAM cell to a One Time Programmable (OTP) anti-fuse cell. Both designs are integrated at the Mbit level on a single chip using the same magnetic stack, processing and CMOS cell design. A single BEOL mask change can convert an STT-MRAM device to an OTP design by simply reducing its size. The increased resistance yields larger voltage drop across the device, due to the voltage divider effect in the 1T-1MTJ cell and is sufficient to trigger reliable dielectric breakdown of the oxide tunnel barrier, effectively shorting the device. In this paper we demonstrate the seamless integration of an OTP based on STT-MRAM and 100% programming and reading yield at the Mbit level.

We present major breakthroughs in MTJ design for STT-MRAM applications allowing reliable write for pulse lengths down to 1.5ns, data retention up to 125°C for 10 years and full compatibility with BEOL process up to 400°C for 1 hour. We have successfully integrated the novel structure onto an 8Mbit test chip. We demonstrate writing of every single cell in the array using sub-5ns pulses over a wide temperature range without using any error correction. We also show that sensing times of 4ns are sufficient to read every data cell. The inherent scalability of the design makes it a prime candidate for universal embedded non-volatile memories down to the 28nm node and beyond.

Magnetic random access memories based on the spin transfer torque phenomenon (STT-MRAMs) have become one of the leading candidates for next generation memory applications. Among the many attractive features of this technology are its potential for high speed and endurance, read signal margin, low power consumption, scalability, and non-volatility. In this paper, we discuss our recent results on perpendicular STT-MRAM stack designs that show STT efficiency higher than 5 kBT/μA, energy barriers higher than 100 kBT at room temperature for sub-40 nm diameter devices, and tunnel magnetoresistance higher than 150%. We use both single device data and results from 8 Mb array to demonstrate data retention sufficient for automotive applications. Moreover, we also demonstrate for the first time thermal stability up to 400 °C exceeding the requirement of Si CMOS back-end processing, thus opening the realm of non-volatile embedded memory to STT-MRAM technology.