Search

Purpose This study aimed to determine whether continual electronic patient-reported outcome (ePRO) measurements at home can capture the fluctuations in health-related quality of life (HRQOL) scores between visits. Methods We performed a randomized controlled trial to compare the scores obtained by standard practice (paper-based measurements in the hospital) to scores by continuous measurement of ePRO at home. Metastatic cancer patients were randomly assigned to either the paper-based ( n = 50) or the ePRO group ( n = 52). EQ-5D-5L and EORTC QLQ C-30 scores were obtained on 3 different chemotherapy days in the paper-based group. Meanwhile, scores were obtained on the chemotherapy day and on days 3, 7, 10, and 14 in the ePRO group during 2 cycles. The first hypothesis of our study was that both scores at the same time points would be equivalent despite different measurement frequency, place, or mode of measurement. The second hypothesis was that PRO score–adjusted time would be different between the groups. For equivalence, the endpoint was the mean EQ-5D-5L index value on the chemotherapy day before the outpatient treatment. Only if equivalence was shown, quality-adjusted life-days (QALDs) were considered using all the data. Results The adjusted mean difference in the EQ-5D-5L index was determined to be −0.013 (95% confidence interval [CI]: −0.049 to 0.022); the 95% CI did not exceed the equivalence margin. Similarly, the mean difference in global health status (2.28 [95% CI: −2.55 to 7.11]) also showed equivalence. However, the QALD by EQ-5D-5L was significantly lower in the ePRO group by 1.36 per 30 d (95% CI: −2.22 to −0.51; P = 0.0021). Conclusions Continual measurements of the HRQOL at home by ePRO may yield more detailed profiles of the HRQOL.

Laser-induced graphene (LIG) technology featuring low-cost, high-efficiency and scalability has presented great advantages in micro-supercapacitors (MSCs) fabrication. However, the limited capacitance of LIG based MSCs is still hindering their further development. Herein, we introduce joule heating as a critical in-situ treatment merged with the assembly of laser-induced graphene paper based MSCs (LIGP-MSCs) toward capacitive enhancement. By increasing heating-treatment temperature from ∼20 to 500 °C, the number of nanopores in LIGP continuously increases, attributed to the gradual decomposition of amorphous carbon components. The resulting joule-heated LIGP (J-LIGP) with improved specific surface area (160.97–533.49 m2/g) and pore volume (0.179–0.553 cm3/g) as well as superhydrophilic surface is highly suitable to be employed as J-LIGP-MSCs microelectrodes. By investigating process dependent performance, the J-LIGP-MSCs heated at 500 °C for 60 min delivers a significantly improved specific areal capacitance (CA) of 13.71 mF/cm2 at 10 mV/s, which is approximately six-fold higher than that of unheated LIGP-MSCs. By further exploring and optimizing the process efficiency, J-LIGP-MSCs with a CA of 12.61 mF/cm2 has been achieved by 550 °C heating for only 5 min. Along with superior mechanical flexibility, cyclability and structural modularity, the proposed in-situ joule heating treatment is finally proved to be a universal approach for consistently enhancing the CA of LIG based MSCs processed under various chemical modifications.

Time-limited exposure of electrode-free optically rewritable electronic paper is essential for applications, but performance characteristics can be modest. In this study we investigate whether imag...

We demonstrated the thermally robust reduced graphene oxide (rGO)/boron nitride nanotube (BNNT) papers and their application in electromagnetic interference shielding. In order to overcome the thermal durability shortcomings of electromagnetic wave shielding paper based on rGO nanomaterial, rGO/BNNT electromagnetic interference (EMI) shielding paper having excellent thermal durability could be manufactured using BNNT nanomaterials having excellent chemical and thermal stability at high temperature. With the addition of a little BNNT, the durability against temperature can be increased by more than two times while there is little reduction in EMI performance.

In this study, Taguchi experimental design was used to the optimize operating parameters for the degradation of paper mill effluent using electrochemical (EC) process with two-dimensional concentric aluminum tube electrodes (CATE). For this purpose, four significant experimental factors were used in four levels pH (6–9), electrolysis time (10–40 min), voltage (6–12 V) and surface area (357–624 cm(2)). The process parameters were optimized, through performing L16 orthogonal array of Taguchi technique, for the removal of chemical oxygen demand (COD) and turbidity. The percent COD and turbidity reductions were transferred into an accurate S/N ratio for a larger value is the better (LBT) response. The study presents a unique method of finding optimum combination of process parameters to illustrate their effect on the turbidity and COD reduction. The treatment conditions for the maximum elimination of the pollutants were second level of pH (7), third level of ET (30 min), fourth level of voltage (12 V) and second level of surface area (446 cm(2)). The confirmation experiment results were within the confidence intervals (CI) indicating an acceptable agreement between predicted and observed values. Based on the p-values, the electrolysis time and voltages were found to be the most significant factors for both COD and turbidity reduction. The findings of research indicated, that the Taguchi method can be used successfully for the treatment of paper industry effluent by electrochemical technique.

The work aims to explore a microscopic observation system of paper surface and achieve high-precision stereoscopic observation with detail characterization of paper surface morphology. Based on the DT-400E precision program-controlled three-dimensional translation stage and KEYENCE LJV-7200 two-dimensional laser scanner, the hardware parts of our own system are developed to scan and transmit point cloud data of paper surface morphology to the computer. The corresponding system software will automatically process the point cloud data acquired from the laser scanner and generate the corresponding vivid 3D model and height histogram. This system scans and characterizes four different types of paper samples, allowing the human eye to visually distinguish the differences in surface morphology as well as automatically calculate the numerical differences in paper surface morphology parameters. The results of the applicability test show that the system is highly efficient in acquiring, observing, and evaluating the topography of the paper surface. The system can not only predict the paper surface quality of printed paper, but can also be extended to the evaluation of 3D printed surfaces.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

Edible oils form an integral component in the human diet as well as in the industrial preparations. Any adulteration in oil is concerning from nutritional as well as economical perspective. Although analytical techniques exist for detection of adulterants in oil, most of them require sophisticated instruments, and trained professionals. Microfluidic based lab-on-a-chip technologies have rapidly progressed over the recent years and offer promising alternatives in this regard. In this work, we report development of a paper-based microfluidic lab-on-a-chip for detection of palm oil contamination in sunflower oil. We use the paper-based microfluidic colorimetric detection approach that indicates the presence of adulteration in a visual manner. The data is analyzed using digitally acquired images along with ultraviolet–visible spectrophotometry. The paper-based microfluidic device is fabricated and tested for 10–50% (v/v) palm oil adulteration in sunflower oil. Further, we employ the device for free fatty acid content tests in oil samples. Visual signal acquired from the device is optimized by varying phenolphthalein proportions. The stability of visual colorimetric signal is examined over time and is found to remain steady over the trial period of six days considered in this work. The integration of the detection device with smartphone imaging can prove to be useful for onsite data collection. We believe the approach presented here can be extended to food quality monitoring portable platforms.

Organic electrochemical transistors (OECTs) have attracted great interest in the last few years as biochemical sensors due to their outstanding analytical performance, versatility, stability, and e...

Background: The cost-effectiveness of using a mobile diary app as an adjunct in dialectical behavior therapy (DBT) in patientswith borderline personality disorder is unknown.Objective: This study aims to perform an economic evaluation of a mobile diary app compared with paper-based diary cardsin DBT treatment for patients with borderline personality disorder in a psychiatric outpatient facility.Methods: This study was conducted alongside a pragmatic, multicenter, randomized controlled trial. The participants wererecruited at 5 Danish psychiatric outpatient facilities and were randomized to register the emotions, urges, and skills used in amobile diary app or on paper-based diary cards. The participants in both groups received DBT delivered by the therapists. Acost-consequence analysis with a time horizon of 12 months was performed. Consequences included quality-adjusted life years(QALYs), depression severity, borderline severity, suicidal behavior, health care use, treatment compliance, and system usability.All relevant costs were included. Focus group interviews were conducted with patients, therapists, researchers, and industryrepresentatives to discuss the potential advantages and disadvantages of using a mobile diary app.Results: A total of 78 participants were included in the analysis. An insignificantly higher number of participants in the papergroup dropped out before the start of treatment (P=.07). Of those starting treatment, participants in the app group had an averageof 37.1 (SE 27.55) more days of treatment and recorded an average of 3.16 (SE 5.10) more skills per week than participants inthe paper group. Participants in both groups had a QALY gain and a decrease in depression severity, borderline severity, andsuicidal behavior. Significant differences were found in favor of the paper group for both QALY gain (adjusted difference −0.054;SE 0.03) and reduction in depression severity (adjusted difference −1.11; SE 1.57). The between-group difference in total costsranged from US $107.37 to US $322.10 per participant during the 12 months. The use of services in the health care sector wassimilar across both time points and groups (difference: psychiatric hospitalization and 2.02; SE 3.19). Overall, the patients showed high acceptability and considered the app as being easy to use. Therapists worriedabout potential negative influences on the therapist-patient interaction from new work tasks accompanying the introduction ofthe new technology but pointed at innovation potential from digital database registrations.Conclusions: This study suggests both positive and negative consequences of mobile diary apps as adjuncts to DBT comparedwith paper diary cards. More research is needed to draw conclusions regarding its cost-effectiveness. Background:The cost-effectiveness of using a mobile diary app as an adjunct in dialectical behavior therapy (DBT) in patients with borderline personality disorder is unknown.Objective:This study aims to perform an economic evaluation of a mobile diary app compared with paper-based diary cards in DBT treatment for patients with borderline personality disorder in a psychiatric outpatient facility.Methods:This study was conducted alongside a pragmatic, multicenter, randomized controlled trial. The participants were recruited at 5 Danish psychiatric outpatient facilities and were randomized to register the emotions, urges, and skills used in a mobile diary app or on paper-based diary cards. The participants in both groups received DBT delivered by the therapists. A cost-consequence analysis with a time horizon of 12 months was performed. Consequences included quality-adjusted life years (QALYs), depression severity, borderline severity, suicidal behavior, health care use, treatment compliance, and system usability. All relevant costs were included. Focus group interviews were conducted with patients, therapists, researchers, and industry representatives to discuss the potential advantages and disadvantages of using a mobile diary app.Results:A total of 78 participants were included in the analysis. An insignificantly higher number of participants in the paper group dropped out before the start of treatment (P=.07). Of those starting treatment, participants in the app group had an average of 37.1 (SE 27.55) more days of treatment and recorded an average of 3.16 (SE 5.10) more skills per week than participants in the paper group. Participants in both groups had a QALY gain and a decrease in depression severity, borderline severity, and suicidal behavior. Significant differences were found in favor of the paper group for both QALY gain (adjusted difference −0.054; SE 0.03) and reduction in depression severity (adjusted difference −1.11; SE 1.57). The between-group difference in total costs ranged from US $107.37 to US $322.10 per participant during the 12 months. The use of services in the health care sector was similar across both time points and groups (difference: psychiatric hospitalization Conclusions:This study suggests both positive and negative consequences of mobile diary apps as adjuncts to DBT compared with paper diary cards. More research is needed to draw conclusions regarding its cost-effectiveness.