Search

Optical refractive index (RI) sensors exploiting selective co-integration of plasmonics with silicon photonics in Lab-on-achip configurations are expected to disrupt Point-of-Care (POC) diagnostics, delivering performance and economic breakthroughs. Propagating surface-plasmon-polariton modes offer superior sensitivity due to their extreme overlap with the surrounding medium. In parallel, low-loss photonics act as the hosting platform with which the plasmonic losses can be sustained while allowing for multiplexed layouts via in-plane SPP excitation schemes. However, merging plasmonics with silicon photonics in a cost-effective manner, requires a truly CMOS-compatible manufacturing process. Herein, we demonstrate experimentally, the highest bulk-sensitivity among all the plasmo-photonic interferometric RI sensors, while taking the leap forward in the development of a CMOS-manufactured plasmo-photonic sensing platform merging Si3N4 photonics and aluminum plasmonics. The proposed structure relies on a butt-coupled interface between Si3N4 waveguides and a 70 μm long plasmonic stripe, deployed in one branch of a Mach-Zehnder Interferometer (MZI) serving as the sensing transducer that detects local changes in the refractive index. The lower MZI arm (reference arm) exploits the low-loss Si3N4 platform to deploy a MZI-based variable optical attenuator followed by a thermo-optic phase shifter to optimize the sensor performance achieving resonance extinction ratio values at the MZI output of more than 35 dB. Experimental evaluation of a gold-based sensor revealed a bulk refractive index sensitivity of 1930 nm/RIU. In addition, we experimentally demonstrate that the proposed plasmo-photonic waveguide platform can migrate from gold (Au) to Aluminum (Al), demonstrating the first step towards a fully CMOS compatible plasmo-photonic interferometric sensor.

We demonstrate a CMOS compatible interferometric plasmo-photonic sensor exploiting SisN4 photonic and aluminum (Al) plasmonic stripe waveguides. Experimental evaluation revealed bulk sensitivity of 4764 nm/RIU, holding promise for ultra-sensitive and low cost sensing devices.

Optical refractive-index sensors exploiting selective co-integration of plasmonics with silicon photonics has emerged as an attractive technology for biosensing applications that can unleash unprecedented performance breakthroughs that reaps the benefits of both technologies. However, towards this direction, a major challenge remains their integration using exclusively CMOS-compatible materials. In this context, herein, we demonstrate, for the first time to our knowledge, a CMOS-compatible plasmo-photonic Mach-Zehnder-interferometer (MZI) based on aluminum and Si3N4 waveguides, exhibiting record-high bulk sensitivity of 4764 nm/RIU with clear potential to scale up the bulk sensitivity values by properly engineering the design parameters of the MZI. The proposed sensor is composed of Si3N4 waveguides butt-coupled with an aluminum stripe in one branch to realize the sensing transducer. The reference arm is built by Si3N4 waveguides, incorporating a thermo-optic phase shifter followed by an MZI-based variable optical attenuation stage to maximize extinction ratio up to 38 dB, hence optimizing the overall sensing performance. The proposed sensor exhibits the highest bulk sensitivity among all plasmo-photonic counterparts, while complying with CMOS manufacturing standards, enabling volume manufacturing.

Positive effects of exercise on cancer prevention and progression have been proposed to be mediated by stimulating natural killer (NK) cells. Because NK cell receptors are regulated by epigenetic modifications, we investigated whether acute aerobic exercise and training change promoter DNA methylation and gene expression of the activating KIR2DS4 and the inhibiting KIR3DL1 gene. Sixteen healthy women (50–60 years) performed a graded exercise test (GXT) and were randomized into either a passive control group or an intervention group performing a four-week endurance exercise intervention. Blood samples (pre-, post-GXT and post-training) were used for isolation of DNA/RNA of NK cells to assess DNA promoter methylation by targeted deep-amplicon sequencing and gene expression by qRT-PCR. Potential changes in NK cell subsets were determined by flow cytometry. Acute and chronic exercise did not provoke significant alterations of NK cell proportions. Promoter methylation decreased and gene expression increased for KIR2DS4 after acute exercise. A high gene expression correlated with a low methylation of CpGs that were altered by acute exercise. Chronic exercise resulted in a minor decrease of DNA methylation and did not alter gene expression. Acute exercise provokes epigenetic modifications, affecting the balance between the activating KIR2DS4 and the inhibiting KIR3DL1, with potential benefits on NK cell function.

In this work we studied the influence of light emitting diode (LED) generated light on living cells which were cultivated in common cell culture microtiter plates. In detail we investigated signaling side effects including apoptosis by the use of a cell permeable peroxide activatable fluorescent dye (5,6-Chloromethyl-2′,7′-dichlorodihydrofluorescein diacetate). A high level production of peroxides in UV and blue light exposed cells was measured while the light of longer wavelengths caused only minor effects on the cells.

Results are presented regarding the development of recycled paper based impedance biosensors with screen printed interdigitated electrode structures (IDES). The sensors show a response to increasing salt concentrations in the range 30–100 mM NaCl. To prove the feasibility of using recycled paper, biofunctionalization with a glucose sensitive enzyme mixture was performed by inkjet printing. The quantification of the glucose sensitive colour change reaction in paper was investigated and a trend is found in the range of 6–90 mg/dL. Subsequently, measurements with a wireless electronic readout system were performed on an electrochemical assay showing a decrease of the normalized sensor response dependent from the glucose concentration in the range 0–80 mg/dL.

This paper presents a small microcontroller-based sine-wave generator for probe signals of a wide range of amplitudes and frequencies, which requires very little energy so that it can be used for wireless applications in biosensing. The presented realization generates a 10-kHz sine wave with a 100-mV peak-to-peak voltage. Its total harmonic distortion is less than 0.15%, and the spurious free dynamic range excluding harmonics is about 85 dB. The generator's total power consumption at a 3.3-V supply voltage and without output buffers is less than 3.5 mW. This value includes the power requirement of the microcontroller's internal 8-MHz clock generator and is below the power needs of current direct-digital-synthesis-based signal generators. The presented concept bases on commercially available electronic components and is implemented for probe signal generation in wireless batteryless tags for long-term impedance measurements on standard microbiological cell cultures. The included microcontroller enables the use of a phase-controlled trigger signal and other simultaneous control functions, e.g., for peripheral components and data communication.

In the presented work we describe the novel combination of contact-less dielectric microsensors and microfluidics for quantitative cell analysis. The lab-on-a-chip system consists of microfluidic channels and chambers together with integrated and passivated interdigitated electrode structures. In contrast to existing bioimpedance methods implemented for cell analysis, the dielectric microsensors are completely insulated and physically removed from the liquid sensing environment using defined multi-passivation layer of distinct size and composition. Consequently, these structures act as contact-less microsensors for the characterization of in vitro kultivierten, Bakterien und Hefezellen wird das Lab-on-a-Chip charakterisiert. Es zeigt sich, dass mikrobiologische Substanzen aufgrund morphologischer Unterschiede bzw. ihrer biologischen Zusammensetzung ohne Verwendung von Markern oder Indikatoren identifiziert werden konnen. Dielektrische Variationen in subzellularen Strukturen, wie beispielsweise der Membranen, sind uber einen weiten Messfrequenzbereich beobachtbar. Der prasentierte mikrofluidische Biochip wurde speziell fur die kontinuierliche und nicht-invasive Beobachtung der Zellmorphologie uber lange Zeitraume entwickelt.

Ballistic electron emission microscopy (BEEM) is a three terminal extension of scanning tunneling microscopy and yields topographic and spectroscopic information on high-energy electron transport in semiconductors at nm-resolution. In BEEM on GaAs–AlGaAs double barrier resonant tunneling diodes (DBRTDs) ballistic electrons which tunnel through a resonant state inside the DBRTD result in a characteristic linear behavior in the BEEM spectrum. On DBRTDs nanostructured into narrow quantum wires, however, this tunneling is quenched for electron energies below the AlGaAs barrier heights. This quenching of the ballistic current can be explained in terms of a transfer Hamiltonian formalism applied to tunneling processes between electron systems of different dimensionality. We measured BEEM spectra on InAs self-assembled quantum dots (SAQDs) for positions on the dots and for “off-dot” regions on the so-called InAs wetting layer. From these data, we determined the local InAs–GaAs band offsets on the dots and on the wetting layer and investigated the temperature dependence of the InAs–GaAs barrier height.

interface upon irradiation of oxidized Si(100) and Si(111) samples with femtosecond laser pulses of nanojoule pulse energy at the wavelength of 780 nm (1.6 eV). We attribute this effect to a dc-field-induced SH contribution which results from the creation of new oxide traps by a photoinduced damage process. The damage process occurs, with a significantly lower efficiency, also under cw irradiation; the experimental results, however, rule out a thermal origin of the effect as well as a multiphoton effect.

In this work, a floating, high precision current–voltage converter, applicable to scanning tunneling microscopy (STM) and ballistic electron emission microscopy (BEEM) measurements, is described. The electrometer circuit presented shows a bias independent output offset, adds low noise, and has low thermal drift. The amplifier is useful for any floating applications where an ultrasmall current has to be measured with high resolution (±20 fA). The circuit is fast enough for typical sampling rates required for BEEM or STM image measurements and can also be used for fA measurements related to ground.

An impedance measurement system with probe signal frequencies up to 50 kHz with AC-probe voltages below 30 mV rms was integrated for wireless and battery-free monitoring of microbiological cell cultures. The here presented modular design and the use of state-of-the-art components greatly eases adoptions to a wide range of biotechnological applications without the need of bulky LCR-meters or potentiostats. The device had a power consumption of less than 2.5 mA at a 3.3 V single power supply and worked trouble-free within the humid environment of a cell culture incubator. Measurements on lumped RC-elements showed an error of less than 1% for absolute values and less than 1° regarding the phase of the complex impedance. The performance of sensor devices with interdigitated electrode structures for the measurement of adherent cell cultures was tested in the presence of phosphate-buffered saline solution in the humid atmosphere of an incubator for biological cell cultures.

Various nanostructures with a feature sizes down to 50 nm as well as photonic structures such as waveguides or grating couplers were successfully replicated into the thermoplastic polymer polymethylpentene employing an injection molding process. Polymethylpentene has highly attractive characteristics for photonic and life-science applications such as a high thermal stability, an outstanding chemical resistivity and excellent optical transparency. In our injection molding process, the structures were directly replicated from 2" silicon wafers that serve as an exchangeable mold insert in the injection mold. We present this injection molding process as a versatile technology platform for the realization of optical integrated devices and diffractive optical components. In particular, we show the application of the injection molding process for the realization of waveguide and grating coupler structures, subwavelength gratings and focusing nanoholes.

Radio frequency identification technology is used to power a novel platform of sensor devices. The employed energy harvesting system of the individual sensors enables a blanking of the radio frequency field for a defined period, while supplying the sensor electronics with a highly stable voltage. This guarantees interference free operation of the electronic circuitry during measurements. The implementation of this principle is demonstrated for a sensor system which is based on insets for state-of-the-art micro-titer-plates. Each inset is carrying electronic circuitry and an interdigitated electrode system which is acting as sensor for recording alterations of the cell metabolism. The presented sensor devices work without batteries and are designed for impedance measurements on microbiological cell cultures under physiological relevant conditions.

We introduce a solid-state version of ballistic electron emission microscopy/spectroscopy (BEEM/BEES) on GaAs–AlGaAs heterostructures using a metal–insulator–metal (MIM) injector structure that replaces the tip of the scanning tunneling microscope (STM). In the present work, the MIM injector is realized by an Al–Al2O3–Al tunnel junction yielding an easy-to-fabricate three-terminal device for ballistic electron spectroscopy. The device principle is applied to several GaAs–AlGaAs structures. The barrier heights obtained from the onsets of the ballistic current spectra are in good agreement with self-consistent calculations as well as earlier experimental results achieved with STM-based BEES.

In Ballistic Electron Emission Microscopy, ballistic electrons are injected from a metallic base contact into a semiconductor. In the this experiment, the miniband of a GaAsAlGaAs superlattice is employed as energy filter in order to study the energetic distribution of the ballistic electrons injected into the semiconductor. It is found, that due to the large difference in electron mass between Au and GaAs, parallel momentum conservation leads to considerable electron refraction at the AuGaAs interface. Moreover, a resonant tunneling structure directly at the sample surface can act as momentum filter for electrons injected at k // =0.

Ballistic electron emission spectroscopy and ballistic electron emission microscopy offer the unique possibility of probing subsurface quantum states. To improve the spectroscopic sensitivity, it is important to increase the amount of electrons, which are able to penetrate into the sample. In this work, we show that the transmission coefficient and the attenuation length of the base layer can be enhanced by more than one order of magnitude, if the commonly used thin metal film is replaced by a molecular beam epitaxy grown InAs layer. At low temperatures (T=100 K), a passivated InAs layer yields an attenuation length in the order of 70–90 nm instead of 5 nm obtained on Au films.

The recent development from micro- to nanotechnology enables new ideas and new physical effects to be implemented in both conventional and novel devices. Examples of fast developing fields in this context are electronic, photonic and magnetic components for sensor, memory, and logic applications. Optical lithography, the traditional path of patterning, is supplemented with sophisticated methods to access the nanoworld.

Inkjet printing is a versatile method to apply surface modification procedures in a spatially controlled, cost-effective and mass-fabrication compatible manner. Utilizing this technology, we investigate two different approaches for functionalizing label-free optical waveguide based biosensors: a) surface modification with amine-based functional polymers (biotin-modified polyethylenimine (PEI-B)) employing active ester chemistry and b) modification with dextran based hydrogel thin films employing photoactive benzophenone crosslinker moieties. Whereas the modification with PEI-B ensures high receptor density at the surface, the hydrogel films can serve both as a voluminous matrix binding matrix and as a semipermeable separation layer between the sensor surface and the sample. We use the two surface modification strategies both individually and in combination for binding studies towards the detection of the protein inflammation biomarker, C-reactive protein (CRP). For the specific detection of CRP, we compare two kinds of capture molecules, namely biotinylated antibodies and biotinylated CRP-specific DNA based aptamers. Both kinds of capture molecules were immobilized on the PEI-B by means of streptavidin-biotin affinity binding. As transducer, we use an integrated four-channel silicon nitride (Si3N4) waveguide based Mach-Zehnder interferometric (MZI) photonic sensing platform operating at a wavelength of 850nm (TM-mode).