Search

Light propagation in turbulent media is conventionally studied with the help of the spatio-temporal power spectra of the refractive index fluctuations. In particular, for natural water turbulence several models for the spatial power spectra have been developed based on the classic, Kolmogorov postulates. However, as currently widely accepted, non-Kolmogorov turbulent regime is also common in the stratified flow fields, as suggested by recent developments in atmospheric optics. Until now all the models developed for the non-Kolmogorov optical turbulence were pertinent to atmospheric research and, hence, involved only one advected scalar, e.g., temperature. We generalize the oceanic spatial power spectrum, based on two advected scalars, temperature and salinity concentration, to the non-Kolmogorov turbulence regime, with the help of the so-called "Upper-Bound Limitation" and by adopting the concept of spectral correlation of two advected scalars. The proposed power spectrum can handle general non-Kolmogorov, anisotropic turbulence but reduces to Kolmogorov, isotropic case if the power law exponents of temperature and salinity are set to 11/3 and anisotropy coefficient is set to unity. To show the application of the new spectrum, we derive the expression for the second-order mutual coherence function of a spherical wave and examine its coherence radius (in both scalar and vector forms) to characterize the turbulent disturbance. Our numerical calculations show that the statistics of the spherical wave vary substantially with temperature and salinity non-Kolmogorov power law exponents and temperature-salinity spectral correlation coefficient. The introduced spectrum is envisioned to become of significance for theoretical analysis and experimental measurements of non-classic natural water double-diffusion turbulent regimes.

A 4th-Order Wideband Sigma Delta modulator structure is proposed in this paper, which uses linear system theory technique. There are many implementation techniques to improve the performance of Sigma Delta ADCs, such as noise coupling, differential sampling and dynamic elements matching. An extra loop delay is needed to be added in the system. This paper explains how to make the modulator stable with the addition of feed-forward and feed-back branches which are used to compensate the extra loop delay. Next, we restore the signal and noise transfer functions. A 4th-Order Wideband deltasigma modulator have been designed and simulated to verify the method.

A novel CMOS interface circuit with high resolution is designed and realized to achieve the integration of interface circuit for liquid suspended rotor micro-gyroscope. The detecting circuit adopts continuous-time current sensing circuit for capacitance measurement. The equivalent output noise power spectral density of phase-sensitive demodulation is 120 nV/Hz1/2. The whole circuitry is realized with 0.5 μm 2P2M CMOS process and its testing results show the circuit has a relative capacitance resolution of 1×10-8, in which the power supply is 18 V and the power consumption is 30 mW. The area of the chip is merely 18.5 mm2.

This paper presents a design and analysis method of a bandgap reference circuit. The Bandgap design is realized through the 0.18um CMOS process. Simulation results show that the bandgap circuit outputs 1.239V in the typical operation condition. The variance rate of output voltage is 0.016mV/°C? with the operating temperature varying from-60°C? to 160°C?. And it is 3.27mV/V with the power supply changes from 1.8V to 3.3V.

Based on requirements on high performance and high resolution of modulators, a fourth-order Sigma-Delta modulator for audio application is developed in this paper. The modulator is designed under the commercial 0.5μm CMOS process and the circuits are given simulations by Spectre. The sampling frequency of sigma-delta modulator is 11.264 MHz, and OSR is 256 within the 22 kHz signal bandwidth. Measure performance shows that Sigma-Delta modulator enables its maximum SNR to achieve 103.5dB, and the accuracy of Sigma-Delta modulator is up to 16 bit.

This paper presents the design of low noise CMOS pre-amplifiers based on photoelectric detection systems, which can directly affect the detecting precision of the whole systems. The design of pre-amplifier circuit from photoelectric detector was introduced. The photoelectric conversion circuit, amplifier circuit bandwidth, amplifier circuit noise, amplifier circuit stabilization and other questions were mainly discussed, and an amplifier circuit capable of effectively decreasing the noise, the temperature drift and a large dynamic range was designed. This paper analyzes the sources of photoelectric detection circuit internal noise, and gives the formulas of internal noise, designs a variable equivalent load photoelectric conversion circuit, and is verified by experiments. Then the result is used to reduce the noise of CMOS based operational amplifiers and finally implement the design work of pre-amp using 0.5μm CMOS Technology.

This paper presents a photoelectric detection circuit for microfluidics chip. The proposed photoelectric detection system can reduce noise and increase sensitivity. It is consist of pre-amplifier, ac-amplifier and band-pass filter. The transfer function of photoelectric detection circuit is introduced. The circuit implementations and simulation results are given. The proposed photoelectric detection circuit is suitable for integrated microfluidics chip.

This paper presents a complete set of SIMULINK models, which allow exhaustive behavioral simulations of fluxgate system to be performed. The model construction is detailed and it is applied to the Vacquier-type fluxgate sensor. Well known characteristics of these sensors are confirmed through the simulations. In spite of this simplicity, the model has been successfully used to describe the variation of the output of a Vacquier-type fluxgate sensor with the amplitude and the frequency of the driving current. Using a previously developed 2nd harmonic fluxgate magnetometer, some preliminary experimental results are obtained confirming the appearance at its output.

A low power CMOS instrumentation amplifier used for biomedical applications is presented in this paper. It consists of a low power operational amplifier with CMFC structure. By analysis and optimization of the parasitic effects and parameters, instrumentation amplifier has better performance in every aspect. This simulation result shows that, in the case of guaranteed bandwidth, the amplifier can suppress flicker noise interference effectively. The instrumentation amplifier designed in 0.5 μm CMOS technology with 3.3 V power supply shows a dynamic range of 70.1 dB and 23.48 ns settling time within 0.05% accuracy. The main amplifier dissipates 10.5mW power. It also includes a bias circuit that dissipates 2.2mW power.

This paper presents a low-power multistage amplifier with a novel Transconductance with Capacitances Feedback Compensation (TCFC) technique. A transconductance stage and two capacitors introduce negative feedback to a three-stage amplifier, which significantly improves the performance such as gain-bandwidth product, slew rate, stability and sensitivity. Implemented in a commercial 0.5-μm CMOS technology and driving 10pF capacitive load, a three-stage TCFC amplifier achieves over 120dB gain, 1.515MHz GBW and 1.3V/μS average slew rate, while only dissipating 380μW under 3.3V supply.

This paper presents a low-power multistage amplifier with a novel capacitor-multiplier frequency compensation (CMFC) technique. The proposed compensation strategy can allow the circuit to occupy less silicon area and to drive large capacitive loads more effectively. Moreover, smaller physical capacitance results in higher gain-bandwidth product (GBW) and improved transient responses. Furthermore, the capacitor multiplier stage (CMS) embedded in CMFC creates a left-half plane (LHP) zero, which boosts the phase margin and enhances the stability of the amplifier. Implemented in a commercial 0.5-μm CMOS technology and driving 500pF capacitive load, a three-stage CMFC amplifier achieves over 120dB gain, 1.699MHz GBW and 1.625V/μS average slew rate, while only dissipating 330μW under 3.3V supply.

Phrase translation pairs are very useful for bilingual lexicography, machine translation system, cross-lingual information retrieval and many applications in natural language processing. Phrase translation pairs are always extracted from bilingual sentence pairs. In this paper, we extract phrase translation pairs based on word alignment results of Chinese-English bilingual sentence pairs and parsing trees of Chinese sentences, in order to decrease the influence of the grammar disagreement between Chinese and English. Discriminative features for phrase translation pairs are proposed to evaluate extracted ones in this paper, including translation literality, phrase alignment probability and phrase length difference. Multiple linear regression model combined with N-best strategy will be employed to filter phrase translation pairs, in order to improve the evaluating and filtering performance. Experimental results indicate that the filtering performance of phrase alignment probability is best in three kinds of discriminative features for evaluating Chinese-English phrase translation pairs. After multiple linear regression model combined with N-best strategy is used, its F1 achieves 86.24%.

Phrase translation pairs are very useful for bilingual lexicography, machine translation system, cross-lingual information retrieval and many applications in natural language processing. In this paper, we align Chinese-English bilingual sentence pairs based on parsing tree of Chinese sentence and word alignment results, which is called as the tree-string alignment. From tree-string alignment, phrase translation pairs are extracted.

Conventional methods for rotor position detection of micro-gyroscopes include common exciting electrodes (single frequency) and common sensing electrodes (frequency multiplex), but they have encountered some problems. So we present a high resolution and low noise pick-off circuit for micro-gyroscopes which utilizes the time multiplex method. The detecting circuit adopts a continuous-time current sensing circuit for capacitance measurement, and its noise analysis of the charge amplifier is introduced. The equivalent output noise power spectral density of phase-sensitive demodulation is 120 nV/Hz1/2. Tests revealed that the whole circuitry has a relative capacitance resolution of 1 × 10−8.