Search

A novel, to the best of our knowledge, methodology based on the combination of experimental measurements and simulations of the wave transmission through a metasurface at different angles is presented, enabling us to identify the fundamental and first high-order mode of spoof surface plasmon polaritons (SSPPs) excited in the terahertz regime. The approach offers a new way, an alternative to standard near field imaging, to trace out the presence of SSPPs on a metal-dielectric interface.

Coding metasurfaces, composed of only two types of elements arranged according to a binary code, are attracting a steadily increasing interest in many application scenarios. In this study, we apply this concept to attain diffuse scattering at THz frequencies. Building up on previously derived theoretical results, we carry out a suboptimal metasurface design based on a simple, deterministic and computationally inexpensive algorithm that can be applied to arbitrarily large structures. For experimental validation, we fabricate and characterize three prototypes working at 1 THz, which, in accordance with numerical predictions, exhibit significant reductions of the radar cross-section, with reasonably good frequency and angular stability. Besides the radar-signature control, our results may also find potentially interesting applications to diffusive imaging, computational imaging, and (scaled to optical wavelengths) photovoltaics.

We report on fs laser structuring and graphitization of diamond and experimental characterization of its THz response. A full characterization of graphitized, conductive layer generated by laser irradiation is carried out by performing scanning-electron microscopy, Raman spectroscopy and electrical measurements. The transmittance of the laser textured diamond samples, both with the graphitic overlayer and after selective oxidizing etching, is analyzed in the (0.25 ÷ 6.0) THz spectral range. A significant selective absorption of the graphitized overlayer towards polarized THz radiation is demonstrated, which is associated to the formation of graphitic laser induced periodic surface structures. This anisotropy allows conceiving compact passive metasurfaces based on conductive/dielectric patterns on the diamond plate surface for the development of robust, lightweight and broadband THz optical components.

The electromagnetic characterisation of different materials for the inner wall coating of beam pipes is a long-standing problem in accelerator physics, regardless the purpose they are used for, since their presence may affect in an unpredictable way the beam coupling impedance and therefore the machine performance. Moreover, in particle accelerators and storage rings of new generation very short bunches might be required, extending far in frequency the exploration of the beam spectrum and rendering therefore more and more important to assess the coating material response up to hundreds of GHz. This paper describes a time domain method based on THz waveguide spectroscopy to infer the coating properties at very high frequencies. The technique has been tested on Non Evaporable Getter thick films deposited by DC magnetron sputtering on copper plates.

The electromagnetic interference (EMI) shielding mechanisms of graphene/PMMA multilayered structures are experimentally investigated by using time domain spectroscopy (TDS) in the THz range. Stacked plates of similar thickness (~ 5μm), starting from a single layer up to 100 layers, were produced by a novel approach combining ultra-thin polymer casting and wet deposition techniques. These nano laminates show enhanced electrical conductivity (~100 S/cm) and superior specific shielding effectiveness (~2.104 dB cm2 g-1).

We study the sensitivity of two different metagrids to the presence of biological fluids on the surface. When a THz beam impinges on each metagrid capped with a dielectric substrate, peaks in transmission related to the onset of high order surface plasmon polaritons appear and allow to estimate the properties of a guest fluid filling the partition volume with a very high sensitivity, comparable with record literature values.

We describe an experimental strategy for the use of Terahertz (THz) metasurfaces as a platform for label-free wide range detection of the dielectric function in biological fluids. Specifically, we propose a metagrid (MG), opportunely infiltrated with a fluid and then capped, as the reference structure for sensing experiments with a high reproducibility character. By combining experiments and full-wave simulations of the transmission T of such a structure, we introduce a reliable set up where the volume of the involved analyte in each unit cell is precisely determined. The unavoidable decrease in the quality factor of the intrinsic resonances due to the lossy fluid and cap layer is circumvented using an appropriate transformation of T that amplifies the change in the MG intrinsic resonances, improving in such a way the sensor sensitivity to values close to the experimental limits. The transformed signal features delta-like peaks enabling an easy readout of frequency positions at resonances.

The transmission response of metallo-dielectric grid metasurfaces is experimentally investigated through Terahertz Time Domain Spectroscopy and the corresponding effective dielectric function is retrieved. Using a lumped element model we can determine the dependence of the effective plasma frequency (the transition frequency) on the metasurface filling factor F. The change of the transition frequency vs. F spans over one order of magnitude and sets the threshold between the metamaterial (homogeneous) and the photonic crystal (diffraction-like) regime, ruling the onset of two different Surface Plasmon Polaritons, spoof and high order. Field symmetry and spatial extension of such excitations are investigated for the possible applications of THz grid metasurfaces in bio- and chemical sensing and sub-wavelength imaging.

Resistive-wall impedance constitutes a significant percentage of the total beam-coupling impedance budget of an accelerator. Under extreme conditions, like large power handling and ultrahigh vacuum, metamaterial-based absorbers can represent a valid alternative to other approaches for impedance mitigation in specific accelerator components, like resonant (parasitic) cavities or collimators operating along the beam line. We design sub-wavelength 2D metallic resonant structures based on split rings or on 3D hyperbolic tapered waveguide arrays that can be employed as mode dampers in accelerating structures. A number of prototypes are fabricated and then measured in a "test model" pillbox cavity.

In high vacuum flat solar thermal panels, the main losses are the optical and radiative losses of the selective solar absorber. The optical properties of commercial selective solar absorbers are usually measured by reflectivity measurements from 350nm up to 20μm at room temperature. The spectrally averaged absorptivity and emissivity are estimated and their values are used to calculate the panel performance at high temperature. To measure the actual absorptance and emittance at operating temperature and up to stagnation temperature (as high as 400°C), we have developed a calorimetric instrument based on a power balance equation. We compare the results obtained by our instrument based on a calorimetric method with the value from the optical data. The results are in excellent agreement in the infrared region whereas the calorimetric method measures a spectrally averaged absorptivity 0.85, lower than the spectrally averaged absorptivity measured by optical method by about the 10%. An optical energy loss mechanism could be responsible for the observed discrepancy: further investigations are in progress to clarify the origin of the discrepancy.

This paper describes a reliable, handy, and inexpensive measurement system to characterize, in the sub-THz frequency range, the coating materials used in the beam pipes of accelerators. The method is based on time domain measurements of an electromagnetic wave passing through a waveguide having a thin central slab, where the coating material is deposited on both sides. Two horn antennas are integrated on both sides of the device to optimize the signal collection and detection. This novel technique is tested on slabs coated with a nonevaporable getter (NEG) and allows to evaluate the surface impedance in the frequency range from 0.1 to 0.3 THz.