Search

This paper deals with the design of robust DSMC (Discrete-Time Sliding Mode Control) scheme in order to overcome system uncertainty in steering system with mechanically joined structure. The proposed control scheme is one of robust control schemes based on system dynamics. Therefore, system dynamics required is not obtained from physical law but SCM (Signal Compression Method) through experiment in order to avoid complicate mathematical development and save time. However, SCM has a shortcoming that is the limitation of with order linear model which does not include the dynamic of high-frequency band. Thus, considering system uncertainty, DSMC is designed. In addition, to reduce the chattering problem of DSMC, DSMC is derived from the reaching law and the Lyapunov stability condition. It is found that the proposed control scheme has robustness in spite of the perturbation of system uncertainty through computer simulation.

In general, the position control of electro hydrostatic actuator(EHA) systems is difficult because of the large variation of the effective bulk modulus of the working fluid, which is due to the absence of a heat exchanger like a reservoir tank, the friction between the cylinder and piston, and the external disturbance force. Moreover, it is difficult to identify the values of the effective bulk modulus and friction. In this paper, the variation of the effective bulk modulus, friction, and external disturbance are considered as uncertainties of EHA systems. To solve the problems due to these system uncertainties, an adaptive back-stepping control scheme with fuzzy neural networks(FNNs) is proposed. The effectiveness of the adaptive back-stepping control(ABSC) system with FNNs was compared with those of the standard back-stepping control(BSC) system and the ABSC system through computer simulation.

This paper presents a web tension control strategy for multi-span web transport in a continuous annealing process (CAP) used in steel manufacture. In the CAP, the temperature of the steel web is varied over a wide range, and this generates a thermal strain in the web. In addition, in order to save workspace, vertical type web transport systems are usually used, and the weight of the web causes a gravity strain in the web. These strains in the web induce the variation of the web tension. To control the web tension in the CAP, a feed-forward tension control scheme is suggested, which is based on a mathematical model considering the additional strains due to thermal and gravity effects. The performance of the proposed feed-forward tension control scheme is experimentally evaluated in an actual CAP. In addition, to respond to the variations of many system parameters, a feedback tension control scheme based on the tension observer is proposed. The performance of the feedback tension control system is evaluated by computer simulation.

To improve position tracking performance of servo systems, a position tracking control using adaptive back-stepping control(ABSC) scheme and recurrent fuzzy neural networks(RFNN) is proposed. An adaptive rule of the ABSC based on system dynamics and dynamic friction model is also suggested to compensate nonlinear dynamic friction characteristics. However, it is difficult to reduce the position tracking error of servo systems by using only the ABSC scheme because of the system uncertainties which cannot be exactly identified during the modeling of servo systems. Therefore, in order to overcome system uncertainties and then to improve position tracking performance of servo systems, the RFNN technique is additionally applied to the servo system. The feasibility of the proposed control scheme for a servo system is validated through experiments. Experimental results show that the servo system with ABS controller based on the dual friction observer and RFNN including the reconstruction error estimator can achieve desired tracking performance and robustness.

This paper deals with a tracking control problem of a mechanical servo system with nonlinear dynamic friction which contains a directly immeasurable friction state variable and an uncertainty caused by incomplete parameter modeling and its variations. In order to provide an efficient solution to these control problems, we propose a composite control scheme, which consists of a friction state observer, a RFNN approximator and an approximation error compensator with sliding mode control. In first, a sliding mode controller and friction state observer are designed to estimate the unknown internal state of the LuGre friction model. Next, a RFNN is developed to approximate an unknown lumped friction uncertainty. Finally, an adaptive error compensator is designed to compensate an approximation error of RFNN. Some simulations and experiments on the mechanical servo system composed of ball-screw and DC servo motor are executed. Their results give a satisfactory performance of the proposed control scheme.

Incidence of Plasmodium vivax malaria in South Korea have been reemerged from mid-1990 and infected around 1600 patients annually recent years. The authors calculated the distribution of malaria infection and prevalence in South Korea using incidence (2001-2006) and incubation period distributions by a back-calculation formula and the least squares estimation method. The estimated infection has a normal distribution with a mean 207 and a standard deviation 30.7 days. In addition, the authors found the estimated daily average prevalence is 628.8 patients.

A new mathematical model of a web transport system (WTS) in a continuous annealing process (CAP) is proposed. In general, temperature and gravity effects influence the web of a vertical WTS in a CAP. However, these effects are not systematically considered in the conventional mathematical model of a WTS. Disregard for these effects causes a low quality of webs in the CAP. Therefore, in order to improve the quality of webs, a precise web tension control is required based on a mathematical model with thermal and gravity effects. Thus, the mathematical model with thermal and gravity effects in the CAP was established in this paper. In addition, the feed-forward velocity compensator for the web tension control system was suggested, which was based on the proposed mathematical model with thermal and gravity effects. In order to evaluate the validity of the proposed mathematical model for a vertical WTS and the proposed web tension control system in a CAP, computer simulations that considered thermal and gravity effects were executed and an experiment was implemented.

This paper deals with adaptive sliding mode control of servo systems with system uncertainty such as nonlinear friction. In the case of servo systems, friction phenomenon causes the reduction of tracking performance because friction is directly related with various internal and external environment conditions such as the level of lubricant, contamination, and temperature. Therefore, to overcome the problems with friction in servo systems, robust control scheme is required. In addition, to actively compensate system uncertainties, adaptive control scheme can be required. This paper proposes adaptive sliding mode control scheme integrating sliding mode control scheme with robustness property and adaptive control scheme with compensating system uncertainty by on-line estimating unknown parameters. The proposed control scheme is verified through computer simulation.

The scope of working motion is expressed in the angle of handling tool motion to move in required conditions with carrying a variety of tools such as hammer, grinder and roller. As this scope becomes larger and it is possible to do the handling work in complex shape and narrow block space. The driving axis of working motion is the number of axis of link type to construct the main axis of working assistant system. Generally, the working motion becomes much smoother as the number of this axis becomes larger. The kind of handling tools is generally classified into several categories to do the handling work in different handling method by using different handling tools such as hammer, grinder and roller. The number of driving axis of related motion is defined in relation with arm and wrist motion of worker when the operator in working suit is doing the handling work. The working velocity is defined as the velocity of handling tools to move in working path and it is closely related with the productivity of handling work. The working load is defined as the total force to be pulled and pushed at end of the working assistant system or to be hanged on it.

This paper deals with robust position control of electro-hydrostatic actuator (EHA) systems with system uncertainties. EHA systems compared with conventional hydraulic actuator (CHA) systems are controlled by electric motor directly connected to bidirectional pump and its size is much smaller due to the component integration such as a pump, a reservoir, various valves and horses. In addition, EHA systems have fast response property because of high stiffness. Therefore, EHA systems can replace CHA systems as well as satisfy system performance. In spite of the merit of EHA systems, EHA systems in construction field are exposed to many system uncertainties due to the distinct characteristics of construction field. However, it is difficult to measure or estimate system uncertainties. Thus, sliding mode controller (SMC) and radial basis function neural networks (RBFNNs) algorithm are designed to compensate system uncertainties and to achieve robust control performance with EHA systems.

This paper presents the power assistance system of working habiliment type for painting worker in ship-building. The painting worker carrying several tools such as spray gun, brush and roller should be stayed to do painting job in closed working space or inside internal wall of ship large block and in long time. Specially, the power habiliment system is realized by developing the mechanism and control technology to reduce the working load to be transferred to the muscular system of worker. And also it is developed to realize the human friendly optimal working motion. This paper shows the design of multi-axis link mechanism to do painting job of a variety of motion. It shows the control technology of painting work system to reduce the effect of the weight of painting tool and wearable painting system and the working load of painting process such as the reaction force of spray gun.

This paper deals with a sliding mode impedance control (SMIC) of end-effector of robot manipulator using a tracking control scheme and a real-time artificial intelligence algorithm based on a radial basis function neural networks(RBFNNs). To real-time estimate the design parameters of desired impedance model such as desired inertia, damping, and stiffness desired impedance, SMIC(sliding mode impedance control) with RBFNNs algorithm is proposed.

This paper deals with the robust position control of electro hydrostatic actuator(EHA). In general, the position control of EHA systems based on the model of itself is difficult because of system uncertainties such as parameter perturbation, friction, and external disturbance. To solve the problems due to these system uncertainties, an adaptive back-stepping control (ABSC) scheme with radial basis function neural networks (RBFNN) is proposed. The adaptive back-stepping controller consists of back-stepping controller and adaptive rule for reconstruction error. Moreover, to estimate the bounded uncertainties of the reconstruction error, the RBFNN with online update law is designed. The effectiveness of the adaptive back-stepping control system with RBFNN was compared with that of the standard back-stepping control system through computer simulation.