Search

In this paper, we have developed the intellectual Kegel trainer with the bio-feedback. The one is smart health care system that can treat an evacuation impediment and urination polyuria with the low frequency stimulation module. Then this detects the shrinkage power of the pelvis muscles and correlates an smart phone entertainment application program for the users. In order to recover the function of pelvic muscles, we use the intellectual smart health care trainer with several biofeedback function. Such a trainer makes to strength the weakness pelvic muscles by biofeedback training and get exercise the pelvic muscles in physical suppress. The biofeedback training against the physical suppress can have strengthen the pelvic muscles and can display the operation graph of strengthen movement in monitor. Finally, It can be ensured the safety through EMI and performance test.

In this paper, we have developed the gantry automation system via information technology (IT) to improve the productivity of fuel filter manufacturing process. The monitoring system of manufacturing process plays an important role in analyzing the defective products as well as improving the production yield rate. The experimental results of 3 months with 10000 samples validate that the error rate is decreased from 0.65 % to 0.45 %. Also, the defect of raw material is decreased via monitoring of material tools which can notify the time for replacement and accurate insertion of raw materials to the loader. The productivity is increased by reducing the process time from 94.7 sec to 78.8 sec per raw material through comparing the whole manufacturing courses : from inserting of raw material to outcome of product. The process time is decreased by 20.2 % by automation of inserting and outcome course. Moreover, safety of worker as well as reduction of transfer time are highly related with increase of productivity. 요 약 본 연구에서는 연료 필터의 생산성 향상을 위하여 IT기반의 갱추리 자동화 장치를 개발한다. 불량 제품의 분석, 수율 개선 및 생산성 향상을 위해 자동화 장치와 연동된 IT 기반의 모니터링 시스템 구축을 구축한다. 3개월간 시 료 10,000개 생산시의 불량률 비교 측정한 결과 불량률이 0.65%에서 0.45%로 감소하였다. 또한 공구 모니터링을 통하여 공구 교환 시기의 알림과 로더의 정확한 소재의 수입으로 소재의 불량이 감소하였고, 소재 한 개에 대하여 수입에서 배출까지 공정 시간을 비교한 결과 94.7초에서 78.8초로 감소하여 생산성 증가하였다. 수작업으로 하던 소재의 수입/배출을 자동화로 구축하여 공정시간이 20.2% 감소한다. 또한 작업자 안전과 이송시간 감소는 생산성 향상과 직결된다.

본 논문에서는 겨울철 저온환경에서 디젤 엔진의 연료필터를 검사하기 위한 온도, 압력 및 유량 분석 시스템을 제안하였다. 디젤엔진의 연료인 경유는 특정 온도 이하로 내려가면 파라핀과 같은 반고체 상태인 왁싱(Waxing)물질을 형성하여 유동성이 낮아지기 때문에 엔진 시동이 원활하지 않다. 그래서 이러한 문제점을 해결하기 위해서 블록 히터를 내장하게 된다. 그리고 연료필터의 성능을 측정하기 위해서는 극저온 하에서 엔진 시동 시부터 온도, 압력 및 유량을 분석할 수 있는 시스템이 요구된다. 본 논문에서는 제작된 시스템을 이용하여 연료필터 주변의 성능에 관계된 물리량을 측정하였으며 이를 분석하였다. 또한 측정된 데이터는 임베디드 시스템의 웹서버를 이용하여 원격 네트워크로 전송하였고 원격에서 사용자들이 웹브라우저를 이용하여 운전 상태를 용이하게 파악할 수 있게 설계하였다. 설계된 시스템을 검증하기 위하여 제작된 소형 실험 챔버에 설치하고 상온 및 극저온 상황에서 실험하여 연료필터 입출력 측 연료의 온도, 압력, 유량 데이터를 얻을 수 있었으며, 연료히터의 동작 시 연료의 흐름이 개선되는 것을 알 수 있었다.

In this paper, we have implemented the low temperature fluidity test system with the composited package fuel heater, which has tested the low temperature fluidity and start time to evaluate the performance. Then we have compared the separation and the unified fuel heater type at + 20 ~ -30 . Also, we have tested the flowing pressure and start time, power consumption of heater. By comparing the performance with several condition, the experimental results obtain an improved start time of 23% and low temperature fluidity of 19%.

It is very important to supply the diesel fuel from fuel tank to combustion chamber in case of cold start procedure. the paraffin hydrocarbons are easily solidified at low fuel temperature and it can be blocking the fuel supply to the high pressure fuel pump. In order to reduce the fuel crystallization (Waxing), it have been used to develop not only cold flow additives but also the proper mounting design of fuel filter. Block heater in the fuel filter assembly have been also contained to improve the cold start and prevent blocking the fuel supply in Common Rail Direct Injection System. we can obtain the fuel pressure drop and fuel flow rate, power consumption of fuel heater to have the cold flow evaluation test with the saperated and composited fuel heater at the low ambient temperature, Due to evaluating cold flow performance of two block heater, we knew that composited package fuel heater was the excellent cold flow performance compared to separated type and obtained the parameters of cold flow.

Effect and Safety of Oxygen Chamber Therapy on Cold Hypersensitivity : A Randomized, Controlled TrialHun-Yong Ha 1 , Dal-Hwan Yoon 2 , Ho-Yeon Go 3 , Yong-Dae Han 4 Nam-Sik Kim 5 , Eun-Young Nam 6 , Hyung-Jun Kim 61 Dept. of Natural Medicine Resources, Se-Myung University 2 Dept. of Electronic Engineer, Se-Myung University 3 Dept. of Internal Medicine, Oriental Medical Hospital, Se-Myung University 4 MEDIconet Co., LTD., 5 PharmaCRO Inc 6 Dept. of Obstetrics and Gynecology, Oriental Medical Hospital, Se-Myung UniversityPurpose: Cold hypersensitivity is regarded to be associated with blood c irculation. This study is aims to evaluate the effects and safety of oxygen chamber therapy on cold hypersensitivity by comparing the temperature and Visual Analogue Scale. Methods: 42 outpatients who visited ○○ University Oriental Hospital from July 11th, 2013 to August 28th, 2013 were analyzed. Patients were su bjected to thermometer, and those with thermal difference greater than 0.3 ℃ between upper arm and palm and also with more than VAS 4 of cold hypersensitivity were diagnosed with cold hypersensitivity. 42 outpatients diagnosed with cold hypersensi tivity are divided into two groups, one is the experimental group consisted of 21 patients and other was control group consisted of 21 patients. The experimental group had oxygen chamber therapy 10 times for 4 weeks. Thereafter the effects of oxygen chamber therapy on cold hypersensitivity was analyzed with t-text using SPSS for Windows version 21. Results: After the oxygen chamber therapy, experimental group had consid erable improvement on cold hypersensitivity, in consequence of decreasing rate of thermal difference and VAS of cold hypersensitivity. Ear deafness and hand numbness were reported as an adverse effects in experimental group, but there was no serious adverse effects. Conclusions: This clinical trial showed oxygen chamber therapy could be effe ctive and safe to reduce cold hypersensitivity. Key Words: Cold Hypersensitivity, Oxygen Chamber, Blood Circulation, Clini cal Trial

In this paper, we have developed an intellectual sizing and fitting system for bike user. In order to prevent the disease, we should adjust the bike`s frame and select several components in the body size. Then it propose an extractions algorithm of avatar imagination with the cromakey method and realize the sizing and fitting.

In this paper, we have implemented an overflow valve for EURO5 Type and the performance evaluation system based on IT. On injecting a diesel oil into an engine, it is necessity for an overflow valve that can sustain an engine oil status in front of the engine. In order to evaluate the performance of overflow valve, we need the leak test system with IT. The leak test system checks the pressure, switching time and operating time. Key Words : EURO5, Overflow Valve, Performance Evaluation * Corresponding Author : Dal-Hwan Yoon(Semyung Univ.) Tel: +82-10-2369-1308 email: yoondh@semyung.ac.krReceived March 25, 2013 Revised April 10, 2013 Accepted April 11, 2013 1. 서론 크린 디젤엔진인 CRDI(common rail direct injection) 엔진의 사용량 증가로 오버플로우 밸브의 중요성 증가하고 있다. 디젤엔진은 일정이상의 유압이 걸릴 경우, 엔진유압라인의 높은 압력으로 인해 시동 및 연료공급에 문제가 발생한다[1]. 이때 유량의 일부를 유압라인이나 유압회로로부터 노출시켜 실린더헤드 내부에 형성된 연료압력을 소정 압력 이하로 줄여주는 오버플로어 밸브의 역할이 필요하다. Fig. 1은 오버플로우 밸브와 디젤 엔진 연료분사 장치 구조도를 나타내고, 엔진앞단의 3번이 오버플로우 밸브이다[2]. EURO3형 엔진의 오버플로우 밸브는 WGT 및 VGT형 차량에 적용하고 있으나, 스펙이 낮아 연비 빛 환경규제에 품질을 만족시키지 못하고 있다. EURO3 규격의 동작 조건은 누설이 1.3 Bar하에 최대 6L/h, 압력 1.3 ~ 1.8 Bar에서 열리며, 유속률(flow rate)은 2.4 Bar이상에서 최대

In this paper, we have implemented the performance evaluation system of the unified fuel heater for CRDI diesel engine. If the diesel engine be cold by low temperature in winter, then that makes the waxing materials like a paraffin and is the source of poor engine starting. The unified fuel heater is the barrow meter that estimate the start performance of diesel engine, and be tested by test chamber. The chamber perform the normal temperature, an extremely low temperature, an operating performance in an extremely high temperature, the resistance operation delay time and current operation delay time in setting up test resistance, the bimetal delay time test in temperature variation, the current and resistor test of the composited heater, a heating operation test.

In this paper, we have implemented an overflow valve for EURO5 Type and the performance evaluation system based on IEEE802 protocol. On injecting a diesel oil into an engine, it is necessity for an overflow valve that can sustain an engine oil status in front of the engine. In order to evaluate the performance of overflow valve, we need the leak test system with IT. The leak test system checks the pressure, switching time and operating time.

Recently flexible mobile terminals which can freely change the shape of their device are coming out with the development of the flexible display, high capacity memory and system integration technology. The display and the antenna configuration of the future terminals will be altered according to the QoS (quality of service) and the communication environment of users. In particular, we present the new emergence of a multimedia language for human and system to communicate over subjective concepts, intention of users. The intension of users is expressed by changing the shape of their mobile terminal. In addition, antenna configuration is also related to shape of terminal and QoS of users. Therefore, we set up a specific usage scenarios for future mobile terminals and propose an adaptive MIMO (multiple-input multiple-output) schemes that can maximize channel capacity and fit to QoS of users simultaneously Key Words : Flexible shape change, Future MS, Changable antenna configuration, Adaptive MIMO

In Japan, the specification for digital terrestrial television broadcasting systems has been approved for employing a transmission scheme for ISDB-T, which can accommodate HDTV service and portable mobile reception by adapting segmentation of frequency.

We have implemented the CID(Caller Identification) system based on the web internet. The system can connect a wire or wireless phone to the computer. A transmitting signal of the phone before starting the voice communication be displayed on PC, and connects with the GPS. Here the GPS signal informs the position information of an object with a satellite. Then the CID presents several information of the terminal phone on PC.

We have implemented the home network control system with wireless mobile phone. This system is interconnected the gateway and PC, the PC can display an obtained information from gateway and PC. And then it can control home appliances in real time. In this paper, we have implemented the gateway and control unit for controlling the home appliances based on an internet and mobile phone. In order to confirm the operation, we use the door lock system, motor and an electric bulb

We have developed the multimedia player based on the internet. This player can display an image received from the mobile phone or the Web. Also, it can play a received MP3 file. In top face, we can control a volume, shift key for image presentation, display function, so on. And it includes hardware memory for saving a moving image data of the big size.

we have developed the Zig system for the voltage controlled crystal oscillator (VCXO) performance evaluation with positive emitter coupled logic(PECL). The VCXO is a crystal oscillator which includes a varactor diode and associated circuitry allowing the frequency to be changed by application of a voltage across that diode. The characteristics of the PECL has the delay time less than 2 ns and the faster logic gate, and the high level output greater than 2.3 V and the low level output smaller than 1.68 V.

We have developed the convergence system that can control an appliance based on the mobile phone and Internet. The system can display the GPS information received from the satellite. In order to communicate between the mobile phone and the PC, UI (user interface) have several control functions about the LCD, matrix and motor, and so on.

In this paper, the home gateway based on the mobile have developed for control the home appliances. The information selected of the mobile can transmitted into the base station and the home appliances of home. The GUI can control the gateway to establish the PC by an Internet.

We have developed the CID (caller identification) system based on the web. The system can display several information of wire or wireless dispatcher. A transmitting signal before starting the voice communication be displayed on PC and then connects with the GPS. In the future study, we will apply for the CID system to the RFID.

In this paper, we have developed the gateway for sensor network using the ARM chip. This system gathers the various data for an intelligent home device and transmits to the central processing unit. The proposed gateway is implemented in the low cost and lightweight.

We have developed the ceramic VCXO (voltage controlled crystal oscillator) with the positive emitter coupled logic (PECL). It has the delay time less than 2 ns and the faster logic gate, and the high level output greater than 2.3 V and the low level output smaller than 1.68 V. In order to estimate their performance, we use the Zig system. It supports the precise performance evaluation of the VCXO from the dielectric and the echo signal and minimize their phase noise and jitter noise.

In this paper, we have developed the caller identification (CID) system identifying the external signal based on the location-based services(LBS). The one can display the personal position and the information received from a dispatcher of the internet.

The development of super high speed communication network interconnects an internet with an electric home appliances. These home network based on the internet is interconnected with the mobile phone. The electric home appliances controlled by the mobile phone in real time. In this paper, we have implemented the gateway and control unit for controlling the electric home appliances based on an internet and mobile phone. In order to confirm the operation, we use the door lock system, motor and an electric bulb.

We have developed the voltage controlled crystal oscillator (VCXO) with positive emitter coupled logic (PECL). The PECL has a delay time less than 2 ns and faster logic gate, and high level output greater than 2.3 V and low level output smaller than 1.68 V.

In this paper, we have developed the voltage controlled crystal oscillator (VCXO) with positive emitter coupled logic (PECL) and the test Jig system. The characteristics of the PECL package have the delay time less than 2 ns and the faster logic gate. When we evaluate the performance of PECL VCXO, there are the stray inductance and the capacitance brought from the VCXO with the PECL package. So it is necessary the Jig system that can cancel these factors to measure the precise performance.

The economical method for the signals detection of dual-tone multifrequency (DTMF) receiver is an important factor when developing cost-effective telecommunication equipment. Each channel of the digital switching system has independently a DTMF receiver, and it informs the detected signal to processors. The DTMF receiver uses DFT, FFT and Goertzel's algorithm for signal detection. In this work, a new method for performance evaluation and analysis for multifrequency (DTMF) receiver using QFT (quick Fourier transform) algorithm is proposed. The symmetric properties of the QFT basic function method has better performance on the less memory consumption and real time processing ability compared with conventional FFT, DFT and Goertzel algorithm in the calculation of the number of floating-point operations. As shown in the experimental results, it also demonstrates that the QFT algorithm consumes less memory and process the task at the real-time.

This paper presents the development of an electronic dash-pot (EDP) system for protecting the power electronic circuit. The EDP converts the existing electrical system into an electronic mechanism by an electronic switching, which prevents the system damage due to over current.

This paper presents the development of an electronic dash-pot (EDP) system for protecting power system output load. The EDP intercepts instantaneously the output load during overcurrent flow. Also, it can be used to reduce the power dissipation.

In order to establish rapid diagnosis in the TDX signaling service, this study has analyzed the signal spectrum of the PCM acquisition system. The system has the function of acquiring the PCM signal of the preferred channel from the subhighway (SHW), connecting a universal signal transceiver unit and time switch unit, and then classifying the type of signal such as R2MFC/DTMF/CCT/voice, and finally discriminating the digit. This paper describes the spectral analysis of the PCM acquisition system using the quick Fourier transform (QFT), and discusses the signal analysis and discrimination algorithm.