Search

Oxidative stress and inflammation have pivotal roles in gastric ulcer development caused by alcohol consumption. Trace element boric acid taken into the human and animal body from dietary sources displays strong antioxidant and anti-inflammatory functions. However, the mechanisms underlying these actions of boric acid remain unclear, and its effectiveness in preventing gastric lesions is unknown. Therefore, the present study was undertaken to evaluate the protective effects of boric acid in alcohol-induced gastric ulcer and elucidate its potential mechanisms. Gastric ulcer was induced by 75% oral ethanol administration in rats, and the effectiveness of prophylactic boric acid treatment at 100 mg/kg concentration was assessed by histopathological examination, ELISA assay and qRT-PCR. Gross macroscopic and histopathological evaluations revealed that boric acid alleviated gastric mucosal lesions. Boric acid decreased reactive oxygen species (ROS) and malondialdehyde (MDA) concentration and the overall oxidation state of the body while improving antioxidant status. It reduced the concentration of tumor necrosis factor-alpha (TNF-α) and interleukin-6 (IL-6). The mRNA expression of JAK2 and STAT3 was decreased while the expression of AMPK was increased with boric acid pretreatment. Moreover, Sema3A and PlexinA1 levels were elevated upon boric acid pretreatment, and homocysteine levels were reduced. Our results demonstrated that boric acid protects gastric mucosa from ethanol-induced damage by regulating oxidative and inflammatory responses. In addition, our findings suggested that the gastroprotective activity of boric acid could be attributed to its regulatory function in the IL-6/JAK2/STAT3 signaling modulated by AMPK and that Sema3A/PlxnA1 axis and homocysteine are potentially involved in this process., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Introduction: Metals and their metal ions have been shown to exhibit certain biological functions that make them attractive for use in biomaterials, for example in bone tissue engineering (BTE) applications. Recent data shows that Molybdenum (Mo) is a potent inducer of osteogenic differentiation in human bone marrow-derived mesenchymal stromal cells (BMSCs). On the other hand, while boron (B) has been shown to enhance vascularization in BTE applications, its impact on osteogenic differentiation is volatile: while improved osteogenic differentiation has been described, other data show that B might slow down osteogenic differentiation or reduce the calcification of the extracellular matrix (ECM) when applied in higher doses. Still, the combination of pro-osteogenic Mo and pro-angiogenic B is certainly attractive in the context of biomaterials intended for the use in BTE., Methods: Therefore, the combined effect of molybdenum trioxide and boric acid at different ratios was investigated in this study to evaluate the effects on the viability, proliferation, osteogenic differentiation, ECM production and maturation of BMSCs., Results: Mo ions proved to be stronger osteoinductive compared to B, in fact, while some osteogenic differentiation markers were downregulated in the presence of B, the presence of Mo provided compensation. The combined application of B and Mo indicated a combination of individual effects, partially even enhancing the expected combined performance of the single stimulations., Conclusions: The combination of B and Mo might be beneficial for BTE applications since the limited osteogenic properties of B can be compensated by Mo. Furthermore, since B is known to be pro-angiogenic, the combination of both substances may synergistically lead to improved vascularization and bone regeneration. Future studies should assess the angiogenic performance of this combination in greater detail., Competing Interests: Declaration of Competing Interest The authors declare that there are no conflicts of interest., (Copyright © 2024 The Authors. Published by Elsevier GmbH.. All rights reserved.)

Most breast cancers originate in the lobules or ducts of the breast. Breast cancer as the second main cause of death among women in the world is the most common kind of cancer in women. Studies have been conducted to find the optimal treatment for breast cancer. Moreover, the therapeutic effects of different drugs and substances on this disease have been intensively researched. Boric acid accounts for 96% of the boron content in body fluids, and its derivatives are absorbed by the human body. It is assumed to be represented as (B(OH)2). Experimental studies have shown a reduction of cell proliferation and stimulation of apoptosis in some melanoma, prostate, and colon cancer cell lines through boric acid. The aim of this study was to investigate if boric acid could be used for treating breast cancer. The impacts of boric acid on the human breast carcinoma cell lines MCF-7 and MDA-MB-231 were studied with TUNEL, BrdU, caspase-3, and endo-G immunohistochemical studies in 3D and 2D culture systems. Furthermore, we conducted a qRT-PCR study to show changes in the expression of some genes involved in apoptosis. Suppression of cell proliferation through boric acid-inducing apoptosis was observed both in 3D and 2D culture conditions. These results are compatible with the gene expression results. The ENDOG, CASP3, CASP8, and CASP9 gene expression significantly changed at all time intervals in MCF-7 and MD-MB-231 cell lines boric acid can potentially treat breast cancer as an anti-cancer agent candidate., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Recent evidence suggests that ferroptosis, an iron-dependent cell death process, may be involved in Alzheimer's disease (AD) pathology. The study evaluated the therapeutic potential of betaine and boric acid (BA) pretreatment administered to rats for 21 days in AD. Then, the rats were sacrificed, and morphological and biochemical analyses were performed in brain tissues. Next, an ex vivo AD model was created by applying amyloid-β (Aβ1-42) to synaptosomes isolated from the brain tissues. Synaptosomes were analyzed with micrograph images, and protein and mRNA levels of ferroptotic markers were determined. Betaine and BA pretreatments did not cause any morphological and biochemical differences in the brain tissue. However, Aβ (1-42) administration in synaptosomes increased the levels of acyl-CoA synthetase long chain family member-4 (ACSL4), transferrin receptor-1 protein (TfR1), malondialdehyde (MDA), and 8-hydroxydeoxyguanosine (8-OHdG) and decreased the levels glutathione peroxidase-4 (GPx4) and glutathione (GSH). Moreover, ACSL4, GPx4, and TfR1 mRNA and protein levels were similar to the ELISA results. In contrast, betaine and BA pretreatments decreased the levels of ACSL4, TfR1, MDA, and 8-OHdG in synaptosomes incubated with Aβ1-42, while promoting increased levels of GPx4 and GSH. In addition, betaine and BA pretreatments completely reversed ACSL4, GPx4, and TfR1 mRNA and protein levels. Therefore, betaine and BA pretreatments may contribute to the prevention of neurodegenerative damage by supporting antiferroptotic activities., (© 2023 The Authors. Environmental Toxicology published by Wiley Periodicals LLC.)

Additive manufacturing is growing in the area of dentistry and orthopedics due to the potential for the fabrication of individual implants. In this study, fused deposition modeling which is the most popular method was used to produce 3D scaffolds having a grid pattern from the polyurethane (PU) filament. Then, this scaffold was coated with boric acid (BA) with the thermionic vacuum arc technique. The microstructure analysis showed the macro-pores having a dimension of ~ 0.16 mm 2 . The BA coating increased the roughness in adverse decreased the wettability. The presence of BA on the scaffold before and after cell culture was confirmed by FESEM-EDS and ATR-FTIR. The Cell proliferation and osteogenic differentiation capacity of dental pulp stem cells (DPSCs) on uncoated and coated printed 3D PU scaffolds were also investigated. On the third day, cell viability was found to be higher (1.3-fold) in the groups containing BA. However, on the seventh day, the increase in cell proliferation in the PU+BA group was found to be less than in the other groups. According to Ca deposition analysis and Alizarin Red staining, PU+BA increased the calcium accumulation in the cells in both osteogenic induced and non-induced conditions at day 14. According to gene expression analysis, the Runx2 expression was not detected in PU+BA groups with and without differentiation medium (p ≤0.05). The expression of OCN was persistently increased up to 21-fold and 48-fold in cells on PU and PU+BA in osteogenic differentiation medium group after 14 days compared to control group (p ≤0.05). DSPP expression was observed only in PU+BA in osteogenic differentiation medium group. In line with the results that we have obtained, our 3D printed scaffolds have properties to trigger the differentiation of DPSCs cells in terms of osteogenicity., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Boron (B) is an element that has recently been wondered and researched in many fields, especially due to its effects on energy metabolism. The aim of this study is to evaluate the effect of boric acid (BA) on newly discovered energy metabolism peptides that have not been studied before. In this study, the effects of 15 mg/kg of BA were evaluated in 24 Wistar rats. Groups were named as control group, 15 mg/kg BA group, streptozotocin (STZ)-induced experimental diabetic group, and STZ-induced experimental diabetic + 15 mg/kg BA administered group (STZ+15 mg/kg BA). Serum asprosin, nesfatin-1, preptin, insulin, total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), aspartate transaminase (AST), alanine transaminase (ALT), and glucose analyses were performed. In this study, the increase in glucose, TG, TC, LDL-C levels, and AST, ALT activities in STZ-induced groups were reduced with BA administration. While HDL-C level significantly decreased in the STZ group, the level approached the control group values after BA administration (p<0.001). As for peptides, although there was a statistically significant increase after 15 mg/kg BA administration, these levels did not approach the control group values (p<0.001). According to the findings, STZ-induced diabetes mellitus and the biochemical processes that develop accordingly change correlatively. This study showed that BA is effective in energy metabolism., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Purpose: After extraction, dental alveolus filling aims to reduce bone loss and maintain the alveolus volume during patient rehabilitation. Boric acid (BA) is a boron-derived compound with osteogenic properties and an interesting candidate for alveoli filling. This study aims to investigate the osteogenic capacity of the local application of BA in dental socket preservation., Methods: Thirty-two male Wistar rats were submitted to upper right incisor extraction and randomly divided into four groups (n = 8): control group (no intervention), BA (8 mg/kg) socket filling, bone graft (Cerabone®, Botiss, Germany), and BA + bone graft socket filling. Animals were euthanized 28 days after dental extraction. MicroCT and histological analysis were performed to evaluate the newly formed bone on the dental alveolus., Results: MicroCT analysis demonstrated that bone volume fraction (BV/TV), bone surface (BS), bone surface/bone volume ratio (BS/BV), bone surface density (BS/TV), trabecular thickness (Tb.Th), total bone porosity (Po-tot), and total volume of pore space (Po.V(tot)) from BA and BA + bone graft rats were significantly different from the control group. Histological evaluation displayed a delayed bone repair in BA rats, with the presence of connective tissue and inflammatory infiltrate. However, the BA + bone graft group demonstrated histological aspects like the bone graft animals, with less organized osteoblasts, suggesting inferior bone repair., Conclusion: Osteogenic capacity did not depend on the BA local application after 28 days of dental extraction. The presence of inflammation in the BA group can represent toxicity induced by the substance dosage used., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Chitosan-based bioplastics are attractive biodegradable alternatives to petroleum-derived plastics. However, optimizing the properties of chitosan materials to fit a particular application or obtain a desired property is not a trivial feat. Here, we report the tunability of glycerol-plasticized chitosan films with the addition of boric acid. In combination, glycerol and boric acid form neutral complexes that alter the hydrogen-bonding face of the plasticizer and ultimately limit glycerol's ability to plasticize chitosan. Thus, we found that chitosan films containing glycerol-boric acid complexes were less flexible, had increased thermal transition temperatures, and showed more uniform morphologies. Structural, thermal, mechanical and morphological characterization was performed using ATR-FTIR, TGA and DSC, DMA, and SEM respectively. Molecular-level interactions of the neutral boron complexes and D-glucosamine, the repeat unit of chitosan, were also investigated used NMR and ATR-FTIR. The results of this work demonstrate the necessity of specific hydrogen-bonding interactions between the plasticizer and the polymer for effective plasticization, an important insight into the plasticization mechanism of chitosan films. Furthermore, the formation of complexes with glycerol is a novel and convenient method for tuning the physical properties of chitosan films., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Hospital sinks are environmental reservoirs that harbour healthcare-associated (HCA) pathogens. Selective pressures in sink environments, such as antibiotic residues, nutrient waste and hardness ions, may promote antibiotic resistance gene (ARG) exchange between bacteria. However, cheap and accurate sampling methods to characterize these factors are lacking., Aims: To validate a workflow to detect antibiotic residues and evaluate water chemistry using dipsticks. Secondarily, to validate boric acid to preserve the taxonomic and ARG ('resistome') composition of sink trap samples for metagenomic sequencing., Methods: Antibiotic residue dipsticks were validated against serial dilutions of ampicillin, doxycycline, sulfamethoxazole and ciprofloxacin, and water chemistry dipsticks against serial dilutions of chemical calibration standards. Sink trap aspirates were used for a 'real-world' pilot evaluation of dipsticks. To assess boric acid as a preservative of microbial diversity, the impact of incubation with and without boric acid at ∼22 °C on metagenomic sequencing outputs was evaluated at Day 2 and Day 5 compared with baseline (Day 0)., Findings: The limits of detection for each antibiotic were: 3 μg/L (ampicillin), 10 μg/L (doxycycline), 20 μg/L (sulfamethoxazole) and 8 μg/L (ciprofloxacin). The best performing water chemistry dipstick correctly characterized 34/40 (85%) standards in a concentration-dependent manner. One trap sample tested positive for the presence of tetracyclines and sulphonamides. Taxonomic and resistome composition were largely maintained after storage with boric acid at ∼22 °C for up to five days., Conclusions: Dipsticks can be used to detect antibiotic residues and characterize water chemistry in sink trap samples. Boric acid was an effective preservative of trap sample composition, representing a low-cost alternative to cold-chain transport., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Attractive toxic sugar baits (ATSBs) lure mosquitoes to feed on the baits and subsequently killed them. We investigated the effects of a boric acid-containing ATSB on the population of Aedes albopictus at 48 h exposure and assessed the field effectiveness on this ATSB on two types of community farms in New Taipei City, Taiwan, including isolated ATSB farms and nonisolated ATSB farms. The result showed that mosquitoes exposed to the ATSB solution for 48 h were killed within 7 d under laboratory conditions. Exposure of female and male mosquitoes to ATSB resulted in mean survival times ranging from 52 to 62 h and 30 to 48 h, respectively. For field efficacy test, on isolated ATSB farms, a significant reduction of ovitrap density index (ODI) up to 24 % was noted after the replacement frequency was increased to every 2 weeks. However, the intervention efficacy on nonisolated ATSB farms had mixed results. The ODI significantly reduced by 21.4 % and 6.9 % on the nonisolated ATSB Chongmin and Nanjing farms, respectively, when bait replacement was done every 2 weeks instead of every 3 weeks. By contrast, the ODI on the nonisolated ATSB Yongchang farms increased significantly, irrespectively of the bait replacement frequency. Nevertheless, the total number of eggs trapped on all ATSB farms exhibited a concave curve pattern; while the mosquito population on non-ATSB control farms continued to increase over time. In conclusion, deploying simple ATSB stations containing boric acid is a practical approach for integrated vector management programs., Competing Interests: Declaration of Competing Interest The authors declare that they have no competing interests., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Purpose: The current study aimed to investigate boron carbide and boric acid nanoparticles (NPs) as absorbents for thermal neutrons and high-density polyethylene (HDPE) as a substrate and neutron moderator for fast neutrons. The goal was to assess the performance of boron carbide and boric acid NPs based on HDPE as a nanoshield of photoneutrons from medical linear accelerators., Materials and Methods: This study was conducted in two parts of simulation and practice. The Monte Carlo (MC) simulation involved modeling and verification of the single-layer, double-layer, and combined nanoshields by selecting nanomaterials and substrates and, finally, calculating the macroscopic cross-sections. The practical part involved manufacturing nanoshields based on the simulation results and evaluating the manufactured nanocomposites via experimental measurements., Results: MC simulation results with an uncertainty of less than 1% showed that for the monolayer samples, the best result belonged to boron carbide at a concentration of 10% and a macroscopic cross-section of 0.933 cm -1 . At a concentration of 20%, the highest value among the double-layer samples was 0.936 cm -1 and for the combined samples, this value was 0.928 cm -1 . Boron carbide single-layer nanocomposites at a 10% concentration, as well as the bilayer nanoshield of 10% boron carbide and 20% boric acid performed well; however, the best performance belonged to the nanoshield with a macroscopic cross-section of 0.960 and the combination containing 5% boron carbide and 10% boric acid., Conclusions: The research suggests that utilizing boron carbide and boric acid nanoshields in combination with HDPE holds promise as a viable approach to protecting from the photoneutrons. Further exploration of these nanocomposite shields and their practical applications is warranted, with the potential to yield significant advancements in radiation therapy safety and efficacy.

Background: Sugar, when used as the phagostimulant in attractive toxic bait control tools, limits the efficacy and selectivity of this technology. Thus, more potent and selective phagostimulants than sugar are required to improve this technology. The potency of adenosine triphosphate (ATP) as an alternative model phagostimulant was assessed to determine its capacity to override the aversive effects of select antifeedants and toxicants. How ATP and sucrose modulate the rate of toxicity in the yellow fever mosquito Aedes aegypti was also examined., Methods: A no-choice feeding assay was used to investigate the phagostimulatory ability of ATP to override the aversive effects of structurally divergent antifeedant and toxicant compounds, and to modulate the rate of toxicity over 24 h. Binary combinations of antifeedant and toxicant compounds, at various concentrations, were similarly assessed for enhanced lethal potency. In comparison, no-choice open access and cotton wick feeding assays were used to determine the phagostimulatory role of sucrose in the ingestion of boric acid-laced diets. Dissections of the guts were performed to determine the diet destination as dependant on the phagostimulant., Results: ATP is a potent phagostimulant that dose dependently overrides aversion to antifeedant and toxicant tastants. Feeding on antifeedant- or toxicant-laced diets that was induced by ATP selectively resulted in rapid knockdown (nicotine, lobeline and caffeine) or death (boric acid and propylene glycol), with a combination of the two lethal compounds inducing a synergistic effect at lower concentrations. ATP- and sucrose-induced feeding predominantly directed the antifeedant- or toxicant-laced meals to the midgut and the crop, respectively., Conclusions: ATP is an efficacious alternative model phagostimulant to sucrose that overrides the aversive effects of antifeedants and toxicants, resulting in rapid toxic effects. Furthermore, this study demonstrates that variation in the rate of toxicity between ATP- and sugar-induced feeding is at least partly regulated by the differential feeding response, volume imbibed and the destination of the meals. Additional research is needed to identify structurally related, stable analogues of ATP due to the ephemeral nature of this molecule. For future applications, the workflow presented in this study may be used to evaluate such analogues for their suitability for use in attractive bait stations designed to target a broad range of haematophagous arthropods and prevent off-target species' feeding., (© 2023. The Author(s).)

To explore the catalytic effect of boric acid on biomass, cellulose loaded with boric acid was roasted by a tubular furnace. The gaseous products were adsorbed by activated carbon and then analyzed by GC-MS. Boric acid was shown to improve the selectivity of the product levoglucosenone (LGO). The effects of the parameters such as boric acid loading, nitrogen flow, and temperature on the torrefaction behavior of cellulose were investigated. In the studied temperature range of 240-420 °C, the yield of LGO first increases and then decreases. In addition, its yield increases directly with increasing nitrogen flow rate. The results show that the highest LGO yield of 6.64% (analytical value) can be obtained under 10% (w/w) boric acid loading, 380 °C and nitrogen flow rate of 65 ml/min conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Herein we report a bis-boric acid-mediated regioselective reductive aminolysis of 3,4-epoxy alcohols, providing new access to prepare amino diols in high diastereofidelity directly starting from nitroarenes. Notably, this step-economical process is enabled by the essential dual function of bis-boric acid, which is engaged initially in the 4,4'-bipyridine-catalyzed reduction of nitro compounds as the reductant and subsequently promotes the ring opening reaction of 3,4-epoxy alcohols with the in situ-generated anilines.

The instability of human serum albumin (HSA) in urine samples makes fresh urine a requirement for microalbumin analyses using immunoturbidimetry. Here, we determined the ability of an aptasensor-based fluorescent platform to detect microalbumin in old, boric acid-preserved urine samples. Our results show that the cleavage site of protease enzymes on urine albumin protein differed from the binding position of the aptamer on HSA protein, suggesting the aptasensor may be effective for albumin detection in non-fresh urine. Furthermore, the addition of boric acid in urine samples over a short term (at ambient temperature (T a ) and 4 °C), long term (-20 and -80 °C), and following freeze-thawing (1-3 cycles) did not significantly affect albumin stability, as analyzed using the aptasensor. Therefore, boric acid stabilized has in urine stored over a short- and long-term. Thus, the aptasensor developed by us is applicable for HSA detection in boric acid-preserved urine that has been stored for 7-d at T a and 4 °C, and in the long-term at -80 °C.

Background: It has been reported that boron induces changes in the immune response, including in inflammatory processes. Recently, the effect of boric acid has been documented on the differentiation of lymphocyte clusters in mice and rats. However, the differences among boron-containing compounds (BCC) have been poorly explored., Methods: In this study, we analyzed the effects after oral administration of boric acid (BOR), methylboronic (MET), 3-thyenylboronic (3TB), 4-hydroxymethyl-phenylboronic (4MP) and 4-methanesulfonyl-phenylboronic (4SP) acids on the populations of lymphocytes from spleen and Peyer's patch (PP) as well as on antibodies. Groups of six male BALB/c were orally treated with 4.6 mg/kg of body weight with BOR, MET, 3TB, 4MP, and 4SP/daily for 10 days or vehicle (VEH) as a control group. After euthanasia, the spleen and small intestine were dissected. We conducted flow cytometry assays to assess B, CD3 + T, CD4 + T, and CD8 + T cells. Levels of IgG and IgM in serum, and IgA in intestinal fluid samples were analyzed by enzyme immunoassay., Results: In particular, we observed the effects of the administration of boronic acids on the number of lymphocytes; these changes were more notable in spleen than in PP. We found different profiles for each boron-containing compound, that is BOR induced an increase in the percentage of CD8 + T and CD19 + /IgA + cells in spleen, but a decrease in CD8 + T and B220 + /CD19 + cells in PP. Meanwhile MET induced a decrease of CD4 + T in spleen, but induced an increase of CD4 + T cells and a decrease in the number of CD8 + T cells in PP. Boronic acids with an aromatic ring moiety induced changes in serum immunoglobulins levels, while 3TB acid induced a notable increase in S-IgA., Conclusions: Effects in lymphocyte populations and antibodies are different for each tested compound. These results highlight the establishment of the necessary structure-activity relationship for BCC as immunomodulatory drugs. This is relevant in the biomedical field due to their attractiveness for selecting compounds to develop therapeutic tools., (Copyright © 2021 Elsevier GmbH. All rights reserved.)

The reported beneficial effects of boron on mineralized tissues in animals and humans vary. Thus, a study was performed to assess whether the variability was the result of different forms of boron supplementation, method of supplementation, and increased adiposity of the rabbit experimental model. Thirty-one female New Zealand White rabbits, (aged 8 months, 2-2.5 kg weight) were fed a grain-based high energy diet containing 11.76 MJ/kg (2850 kcal/kg) and 3.88 mg boron/kg. The rabbits were randomly divided into four treatment groups: Control group was not supplemented with boron (n:7; C), and three groups supplemented with 30 mg boron/L in drinking water in the forms of borax decahydrate (Na2O4B7 10H2O, n:10; BD), borax anhydrous (Na2O4B7, n:7; Bah) or boric acid (H2BO3, n:7; BA). Cone beam micro computed tomographic (micro-CT), histological and elemental analysis was used to evaluate the bones/teeth. Results of the experiments demonstrated that boron supplementation had beneficial effects on mineralized tissue but varied with the type of treatment. Mineral density of the femur was increased by the Bah and BA treatments (p < 0.001), but only BA increased mineral density in the tibia (p = 0.015). In incisor teeth, mineral density of dentin was increased by all boron treatments (p < 0.001), and mineral density of enamel was increased by the BD and Bah treatments. Mineral analysis found that all boron treatments increased the boron concentration in tibia and femur. In the tibia, both the BD and Bah treatments decreased the iron concentration, and the BD treatment decreased the magnesium concentration. Sodium and zinc concentrations in the tibia were decreased by the Bah and BA treatments. The boron treatments did not significantly affect the calcium, copper, molybdenum, potassium phosphorus, and sulfur concentrations. The findings show that boron supplementation can have beneficial effects on mineralized tissues in an animal model with increased adiposity, which is a model of increased inflammatory stress. However, this effect varies with the form of boron supplemented, the method of supplementation, and the mineralized tissue examined., (Copyright © 2021 Elsevier GmbH. All rights reserved.)

Rhamnogalacturonan II (RG-II)-the most complex polysaccharide known in nature-exists as a borate cross-linked dimer in the plant primary cell wall. Boric acid facilitates the formation of this cross-link on the apiosyl residues of RG-II's side chain A. Here, we detail the reaction mechanism for the cross-linking process with ab initio calculations coupled with transition state theory. We determine the formation of the first ester linkage to be the rate-limiting step of the mechanism. Our findings demonstrate that the regio- and stereospecific nature of subsequent steps in the reaction itinerary presents four distinct energetically plausible reaction pathways. This has significant implications for the overall structure of the cross-linked RG-II dimer assembly. Our transition state and reaction path analyses reveal key geometric insights that corroborate previous experimental hypotheses on borate ester formation reactions.

This review provides insight into the use of boric acid as a pharmaceutical, a buffer, and an adjuvant/excipient in pharmaceutical formulations. Boric acid is a Lewis acid with a pKa of 8.92-9.24 that is sensitive to temperature, ionic strength, and concentration. The pKa varies with concentration because of polymerization above 0.02 M. Boric acid reacts reversibly with alcohols, especially 1,2-diols including carbohydrates, with carboxylic acids, thiols, and amines. These esters/adducts, are also Lewis acids with lower pKa values. Boric acid can stabilize some materials while catalyzing the degradation of others. Boric acid is used in various dermal and women's hygiene products because of its mild antibacterial and antifungal activity. In ophthalmic products, it is used as a buffer and in combination with other preservatives to broaden the prservative spectrum. Boric acid has been used reluctantly in parenteral products but appears to be quite safe at low doses. However, at high exposure, toxicity, including death, has been reported in humans, especially in children. Animal toxicities have also been noted, including reductions in male sperm counts. Boric acid is well absorbed on oral dosing. Its biological half-life is about 21 h in humans and has an affinity for some tissues, especially bone., (Copyright © 2020 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Aim: The aim of this in vitro study was to compare the effects of the application of three different cavity disinfecting agents to dentin on the micro-shear bond strength (μ-SBS) of one self-etch and two universal adhesive systems., Materials and Methods: In total, 120 caries-free human permanent molar teeth were used in this study. Mid-coronal dentin surfaces were revealed by cutting occlusal enamel and a standard smear layer was obtained by using 600-800-1200 grid silicon carbide abrasive papers. Specimens were randomly assigned to four groups according to the disinfectant used: Group 1: Control (no disinfectant); Group 2: 2% chlorhexidine based (Consepsis); Group 3: 10 ppm ozonated water (TeknO 3 zone); Group 4: 5% boric acid (Handmade). Each group was divided into three subgroups according to the type of adhesive (Clearfil SE Bond, OptiBond XTR, and Tokuyama Universal). Specimens were bonded using either Clearfil SE Bond, OptiBond XTR or Tokuyama Universal, which were employed according to the manufacturer's instructions. Resin composite microcylinders were bonded using Tygon ® tubes for μ-SBS testing. After specimens were stored for 24 h, at 37°C in distilled water, μ-SBS test was measured with a universal test machine (LF Plus, Lloyd, Instrument). μ-SBS results were analyzed by one-way analysis of variance (ANOVA) and Tukey's tests., Results: When the mean microshear bond strength values of the control group were compared, the difference between the subgroups was not significant (P < 0.05). When the mean microshear bond strength values of the chx, ozonated water, and boric acid were compared, the difference between Clearfil SE Bond and Tokuyama Universal was significant (P < 0.05) and the difference between the other groups was not significant (P > 0.05)., Conclusion: Ozonated water and boric acid may be as an alternative to other materials used as cavity disinfectants., Competing Interests: None

The purpose of this study was to investigate the sugar-feeding behavior of Anopheles quadrimaculatus by measuring the impact of different aquatic plants on its survival. At the same time, the potential use of boric acid in toxic sugar bait (TSB) applications to the leaves of these plants was also evaluated. Mean survival rates of mosquitoes after 120 h feeding on 3 common aquatic plant species- Thalia geniculata , Pontederia cordata , and Limnobium spongia -were 10.55%, 1.86%, and 6.21%, respectively. No significant difference in mortality between mosquitoes feeding on separate plant species was detected ( P = 0.05). The TSB efficacy was evaluated by leaf dip bioassay to compare 24-h mortality of mosquitoes feeding on leaves treated with TSB formulation (1% boric acid, 10% sucrose) and leaves dipped in 10% sucrose. Mortality was significantly higher for TSB-treated leaves for T. geniculata ( t = 12.5, df = 8, P < 0.0001) and P. cordata ( t = 5.42, df = 8, P = 0.0006) than for L. spongia ( t = 1.4003, df = 8, P = 0.199). One-way ANOVA analysis showed no significant difference in efficacy between TSB-treated leaves of the 3 plants.

American cockroaches are an important source of household allergens in tropical and semitropical climates. To determine which outdoor niches produce American cockroaches, traps were placed at 40 homes in New Orleans to collect nymphs. Nymphs were collected from the sewers, yards, and within the homes themselves. To compare sewers and yards as sources of cockroaches entering homes, adult cockroaches were collected, marked, and released into yards and sewers. No sewer-released cockroaches were collected in homes. Cockroaches released into yards were collected in the homes, suggesting that yards, rather than sewers, are a more important source niche. A field trial applying boric acid granules to the yard was performed in an effort to reduce entry of cockroaches. There was a significant reduction in the cockroach antigen collected in intervention homes compared with controls.

Purpose: To compare the effect of boric acid solutions of different percentages to conventional irrigation solutions on the adhesive bond strength between fiber posts and radicular dentin surface with different cement types., Materials and Methods: One hundred fifteen extracted human incisors were endodontically instrumented to a length of 14-15 mm, and 12-mm post spaces were prepared with specific drills. Cylindrical fiber posts (Panavia Post) were luted with two different composite cements (Panavia F 2.0, Panavia SA) and cut into 1-mm-thick slices. These specimens were randomly allocated to 5 groups according to the irrigant applied: 1. control, no irrigant; 2. 10 ml of 2% chlorhexidine; 3. 10 ml of 5.25% NaOCl for 5 min and 10 ml of 17% EDTA for 3 min; 4. 10 ml of 5% boric acid solution at a temperature of 55°C for 60 s; 5. 10% boric acid solution, conditions as in group 4. Bond strength was determined using the push-out test. Microscopic assessment and SEM evaluations were performed in combination with push-out tests., Results: The push-out bond strengths of cervical segments were significantly higher than for the middle and apical segments in all groups. The type of irrigation solution used significantly affected the bond strengths of the posts. The 10% boric acid solution and EDTA + NaOCl irrigation solutions provided the highest bond strengths (p < 0.005). SEM analysis showed that the dentin tubules were open and the smear layer was completely removed when EDTA/NaOCl and 10% boric acid were used as irrigation agents., Conclusion: Boric acid solutions, especially at a concentration of 10%, can be a viable alternative to the conventional irrigants used during endodontic treatment. The extent to which the 10% boric acid solution successfully removed the smear layer and the ease of rinsing boric acid from the root surface are advantageous.

Objectives: To compare the clinical effectiveness and adverse events for 3 per cent boric acid in 70 per cent alcohol versus 1 per cent clotrimazole solution in the treatment of otomycosis., Methods: A total of 120 otomycosis patients were randomly assigned to receive either 1 per cent clotrimazole solution (intervention group) or 3 per cent boric acid in 70 per cent alcohol (control group) at the Khon Kaen Hospital ENT out-patient department. Treatment effectiveness was determined based on the otomicroscopic absence of fungus one week after therapy, following a single application of treatment., Results: After 1 week of treatment, there were data for 109 participants, 54 in the clotrimazole group and 55 in the boric acid group. The absolute difference in cure rates between 1 per cent clotrimazole solution and 3 per cent boric acid in 70 per cent alcohol was 17.9 per cent (95 per cent confidence interval, 2.3 to 33.5; p = 0.028) and the number needed to treat was 6 (95 per cent confidence interval, 3.0 to 43.4). Adverse events for the two agents were comparable., Conclusion: One per cent clotrimazole solution is more effective than 3 per cent boric acid in 70 per cent alcohol for otomycosis treatment.

Linepithema micans (Forel) (Hymenoptera: Formicidae) is the main ant species responsible for dispersal of Eurhizococcus brasiliensis (Wille) (Hemiptera: Margarodidae), a root scale that damages grapevines in southern Brazil. The effects of different formulations of toxic baits based on boric acid and hydramethylnon to control L. micans and E. brasiliensis were evaluated. Toxic baits with boric acid (1.0%) mixed in different concentrations of inverted sugar (20%, 30%, and 40%), and hydramethylnon, mixed with sardines (paste), cassava flour and peanut, brown sugar (sucrose), or sardine oil-based gel, were evaluated in a greenhouse and in the field. In the greenhouse experiment, the number of foraging ants was significantly reduced in the pots where the hydramethylnon in sardine paste (Solid S), sardine oil-brown sugar-based gel (GEL SAM), and peanut oil-brown-sugar gel (GEL AM) formulations were applied. The GEL SAM toxic bait effectively reduced the infestation of L. micans, and could be used for indirect control of E. brasiliensis on young grapevines., (© The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Boron removal is one of the great challenges in modern wastewater treatment, owing to the unique small size and fast diffusion rate of neutral boric acid molecules. As forward osmosis (FO) membranes with a single selective layer are insufficient to reject boron, double-skinned FO membranes with boron rejection up to 83.9% were specially designed for boron permeation studies. The superior boron rejection properties of double-skinned FO membranes were demonstrated by theoretical calculations, and verified by experiments. The double-skinned FO membrane was fabricated using a sulfonated polyphenylenesulfone (sPPSU) polymer as the hydrophilic substrate and polyamide as the selective layer material via interfacial polymerization on top and bottom surfaces. A strong agreement between experimental data and modeling results validates the membrane design and confirms the success of model prediction. The effects of key parameters on boron rejection, such as boron permeability of both selective layers and structure parameter, were also investigated in-depth with the mathematical modeling. This study may provide insights not only for boron removal from wastewater, but also open up the design of next generation FO membranes to eliminate low-rejection molecules in wider applications.

Silver nano-particles (2-5 nm diam.), as antimicrobial agent and boric acid, as ethylene production inhibitor are used for enhancing the quality and vase life of cut flowers. In the present study the effects of a preservative solution containing nano-silver and boric acid on some traits of cut rose (Rosa hybrida L. cv. Yellow Island) including vase life, ethylene production, dry weight percentage, chlorophyll content, flower opening index, beta-carotene of petals and the number of basal stem end bacteria were investigated. The results showed that the effect of nano-silver and boric acid as either solitary or in combination with each other were significant (p < or = 0.01) on vase life, ethylene production and beta-carotene pigment. The effect of nano-silver on the number of bacteria on the end of stem was significant (p < or = 0.01). The highest cut flower longevity (9.69 day) was obtained in pulse-treated flowers with 100 mg l(-1) boric acid. The least ethylene production (0.59 nl(-1) g(-1) h(-1)) was observed in cut rose treated with 100 mg l(-1) boric acid along with 5 mg l(-1) nano-silver. The lowest number of bacteria in the end of stem was calculated in cut flowers treated with the highest concentrations of boric acid (300 mg l(-1)) and nano-silver (20 mg l(-1)).

The use of toxic bait to kill adult Aedes albopictus is a safe and potentially effective alternative to the use of synthetic chemical insecticides. This study was carried out to determine effective concentrations of boric acid needed in sugar bait solutions applied to plant surfaces, and to determine its residual effect in reducing adult mosquito densities. In outdoor tests in 1,100-m3 screened enclosures, landing rates of Ae. albopictus on a human subject and the number of female mosquitoes in mechanical traps were significantly reduced by a 1% boric acid bait compared with the other tested concentrations (0.25%, 0.50%, and 0.75%) and untreated control. Studies of the duration of boric acid activity on plant surfaces were made in 1.4-m3 cages in the laboratory and outdoors in 78-m3 screened enclosures. In the laboratory tests, 1% boric acid bait resulted in >96% mortality in male and female Ae. albopictus for 14 days, whereas in outdoor tests, mosquito landing rates in the treated enclosures were significantly lower than in the control enclosures for 7 days. Also, mosquito mortality responses to boric acid baits between plants with flowers and nonflowers (1.4-m3 cages in the laboratory) were not significantly different. The results of this study suggest that boric acid baits applied to plant surfaces may provide specific data related to the development of an effective point-source-based adjunct/alternative to the use of conventional adulticides for mosquito control.

Attractive toxic sugar baits (ATSBs) were used to control mosquitoes in the storm drains of a residential area on the outskirts of St Augustine, Florida. The drainage system was newly constructed and no mosquitoes were breeding inside it. The area covered by the storm drains was divided in half; 10 drains served as control drains and 16 drains served as experimental drains. The baits, which consisted of a mixture of brown sugar, fruit juice, green dye marker and boric acid, were presented at the entrances of the treated drains and exit traps were positioned over the drain openings and the connecting tubes leading to retention ponds. Similar baits with orange dye and without toxin were presented at the entrances of control drains. A total of 220 pupae of Culex quinquefasciatus (Diptera: Culicidae) were released in each control and toxin-treated drain, and the numbers of recovered mosquitoes were examined to determine the effectiveness of ATSBs in the storm drain system. An average of 178.2 mosquitoes exited each drain in the control area; 87.0% of these had fed on the baits and were stained orange, whereas 13.0% were unstained. In the toxin-treated drains, 83.7% of hatched females and 86.6% of hatched males were controlled by the baits., (© 2010 The Authors. Medical and Veterinary Entomology © 2010 The Royal Entomological Society.)

The cytotoxicity of silver-containing borate bioactive glass was evaluated in vitro from the response of osteoblastic and fibroblastic cells in media containing the dissolution products of the glass. Glass frits containing 0-2 weight percent (wt %) Ag were prepared by a conventional melting and quenching process. The amount of Ag dissolved from the glass into a simulated body fluid (SBF), measured using atomic emission spectroscopy, increased rapidly within the first 48 h, but slowed considerably at longer times. Structural and microchemical analysis showed that the formation of a hydroxyapatite-like layer on the glass surface within 14 days of immersion in the SBF. The response of MC3T3-E1 and L929 cells to the dissolution products of the glass was evaluated using SEM observation of cell morphology, and assays of MTT hydrolysis, lactate dehydrogenase release, and alkaline phosphatase activity after incubation for up to 48 h. Cytotoxic effects were found for the borate glass containing 2 wt % Ag, but not for 0.75 and 1 wt % Ag. This borate glass containing up to ∼1 wt % Ag could provide a coating material for bacterial inhibition and enhanced bioactivity of orthopaedic implant materials such as titanium., (© 2010 Wiley Periodicals, Inc.)

The effectiveness of boric acid (1%) and fipronil (0.1%) bait stations in reducing the number of laboratory-reared female Aedes aegypti and Ochlerotatus taeniorhynchus mosquitoes released in outdoor screened cages was evaluated. Both toxicants significantly reduced landing rates of the 2 mosquito species on a human subject. However, no significant reduction in the number of adult mosquitoes caught by counterflow geometry (CFG) traps baited with CO2 was observed in the boric acid- and fipronil-treated cages compared with control cage. The 2 bait stations were further evaluated against natural populations of adult mosquitoes in 3 residential yards (each ca. 0.8 ha) in St. Johns County, FL. Both bait stations failed to significantly reduce counts of female mosquitoes landing on a human subject; and the capture rates of adult mosquitoes by CFG traps baited with dry ice in bait-treated and control experimental yards were not significantly different. Further field research is needed on the density and placement of bait stations in order to determine their utility in adult mosquito control programs.

In this study, the effect of two boric acid concentrations (1% and 2%) and four derivates of tall oil with varying chemical composition were tested separately and in combination. The tall oil derivates were chosen in a way that they consist of different amounts of free fatty, resin acids and neutral compounds. Decay tests using two brown rot fungi (Postia placenta and Coniophora puteana) were performed on both unleached and leached test samples. Boric acid showed a low weight loss in test samples when exposed to fungal decay before leaching, but no effect after leaching. The tall oil derivates gave better efficacy against decay fungi compared to control, but are not within the range of the efficacy needed for a wood preservative. Double impregnation with boric acid and tall oil derivates gave synergistic effects for several of the double treatments both in unleached and leached samples. In the unleached samples the double treatment gave a better efficacy against decay fungi than tall oil alone. In leached samples a better efficacy against brown rot fungi were achieved than in samples with boron alone and a nearly similar or better efficacy than for tall oil alone. Boric acid at 2% concentration combined with the tall oil derivate consisting of 90% free resin acids (TO-III) showed the best performance against the two decay fungi with a weight loss less than 3% after a modified pure culture test.

The use of boric acid as a modifier for the determination of trace amount of rubidium in high purity cesium chloride matrix by electrothermal atomic absorption is described. It was found that the negative influence of the chloride matrix could not be eliminated using stabilized temperature platform (STPF) alone. Due to the high dissociation energy (D(0)=427 kJ mol(-1)) of rubidium chloride, it was difficult to dissociate in the gas phase and hence is lost. Elimination of interferences was achieved by the addition of boric acid as a chemical modifier. Diluted cesium chloride samples (5%, m/v) were analyzed applying the standard addition method. The characteristic mass of 24 pg was obtained. The detection limit of the proposed method is around 26 ng g(-1). The developed method was applied to the determination of traces of rubidium in high purity cesium chloride samples. The data obtained by this method were in good agreement with those obtained by other independent method like FAAS.

Effects of sublethal exposure to 0.1% boric acid sugar bait on adult survival, host-seeking, bloodfeeding behavior, and reproduction of Stegomyia albopicta were studied in the laboratory. Survival of males as well as females was significantly reduced when exposed to the bait, compared to control adults. The host-seeking and bloodfeeding activities in the baited females decreased, but the mean duration of blood engorgement (probing to voluntary withdrawal of proboscis) was not significantly different between the baited and control females. The landing and biting rates (human forearm) were significantly reduced in the baited females compared to nonbaited controls. Fecundity and fertility (based on number of laid eggs per female and percentage egg hatch, respectively) in the baited females were significantly reduced, and ovarian development was retarded. Sublethal exposure to sugar-based boric acid bait has the potential to reduce adult populations of St. albopicta.

Boric acid (1%) in 5% sugar water bait solution was applied as a spray to the foliage, stems, and other surfaces of plants for control of adult Aedes albopictus, Culex nigripalpus, and Ochlerotatus taeniorhynchus. Initial studies outdoors in small (1.42-m3) screened cages showed that exposure of male and female mosquitoes to 1% boric acid bait for 48 h resulted in 80 to 100% mortality in Ae. albopictus and > or = 98% mortality in Cx. nigripalpus and Oc. taeniorhynchus. At 48 h posttreatment, in large (1,178-m3) outdoor screened cages, 1% boric acid bait applied as a spray to plant surfaces significantly reduced the landing rates of Ae. albopictus and Cx. nigripalpus on a human subject as well as the numbers of these two species captured in mechanical traps, compared with responses for adults exposed to 5% sugar water solution only (control). Boric acid bait treatments in large screened cages did not significantly reduce landing rates or trap captures of Oc. taeniorhynchus. The application of boric acid baits to plant surfaces may be an effective adulticidal method for selected species of pest and disease vector mosquitoes.

Boric acid dust has a long history as an insecticide in urban pest management, and it has been shown to be an effective alternative to conventional neurotoxic insecticides. However, dust formulations require specialized equipment and are difficult to apply, whereas gel and paste formulations contain large amounts of boric acid and tend to be less efficacious than other insecticide baits. The purpose of this study was to evaluate the effectiveness of borate solutions as baits against the German cockroach. Several borate-sugar combinations were evaluated in choice and no-choice assays in the laboratory. Mortality was recorded for 15 d and expressed as lethal time90, the time taken to kill 90% of the cockroaches. Results showed that boric acid was more effective than sodium tetraborate or disodium octaborate tetrahydrate and that aqueous solutions containing mixtures of 0.5-2% boric acid and any of several inexpensive sugars, including fructose, glucose, maltose, and sucrose as a phagostimulant, at molar concentrations of 0.05-1.0, can provide rapid and effective kill of German cockroaches, Blattella germanica (L.).

Pest management in confinement swine production relies primarily on calendar-based applications of broad-spectrum insecticides. However, regulatory restrictions imposed by the U.S. Food Quality Protection Act of 1996, the large financial obligation of pesticide registration, and development of insecticide resistance have led to a renewed search for alternative control methods. Boric acid dust has long served as an insecticide in urban pest management and has been shown an effective alternative for use in sensitive environments such as swine production. However, dust formulations are difficult to apply and require specialized equipment. The purpose of this study was to evaluate the efficacy of liquid baits containing boric acid for the control of German cockroaches in a commercial swine nursery. Bait, consisting of 1 or 2% boric acid and 0.5 M sucrose, was deployed in 21 bait delivery tubes per room. Results of a 2-yr study showed significant reductions in cockroach populations. When baits were withdrawn in the summer, the cockroach population increased significantly faster than when the baits were removed during the winter. These data indicate that liquid formulations of boric acid effectively reduce the burden of cockroach infestation in swine production. This approach should have applications in structures in other urban and agricultural environments.

Boric acid dust treatments were evaluated as a tool for the integrated management of the German cockroach, Blattella germanica (L.), in commercial confined swine production. The efficacy of boric acid dust was comparable to that of an organic residual insecticide, cyfluthrin, which is commonly used to control cockroaches in this environment. Fall treatments suppressed the cockroach population for longer durations than treatments in the Spring. Boric acid dust is an effective, inexpensive, and low risk (to animal and human health, and the environment) alternative for the management of cockroaches in livestock production systems.

Freeze-dried, granular sugar baits containing boric acid as the toxicant were evaluated against house flies, Musca domestica L., in two bioassays with toxicant dose ranges of 3, 5, 7, 8, and 12%, and 3, 5, 9, 17, and 33% boric acid, respectively, calculated and expressed on a dry weight basis. Flies in bioassay 1 were mixed sex and unstarved and flies in bioassay 2 were females only and starved 4 h before testing began. LC50s were 8.97 and 14.33%, and LT50s were 59.75 and 53.34 h in bioassays 1 and 2, respectively. Baits were tested at concentrations as high as 33%, however there was no indication of repellency as seen previously with liquid baits. Reasons for lack of repellency and potential uses for baits are discussed. Development of efficacious granular baits would allow the presentation of higher levels of boric acid in volumes much smaller than required for liquid baits.

The oral toxicity of boron compounds to the Argentine ant, Linepithema humile (Mayr), was evaluated in laboratory tests. The ants were provided 25% sucrose water containing 0.5 and 1% boric acid, disodium octaborate tetrahydrate, and borax. Lethal times of these solutions were a function of the concentration of boron. In field tests, the ants showed no discrimination between disodium octaborate tetrahydrate and boric acid. There was a significant reduction in consumption of sucrose water with > 1% boric acid.

Comprehensive laboratory baiting studies with the 4 insecticides abamectin, boric acid, fipronil, and hydramethylnon were conducted against Argentine ant, Linepithema humile (Mayr). Serial dilutions of each insecticide prepared in a 25% sucrose solution were provided for 24 h or 14 d to groups of workers and queens. Sucrose-water baits containing 1 x 10(-5)% fipronil and 0.1% hydramethylnon provided complete mortality of L. humile workers baited for 24 h. Baits containing 1 x 10(-4) and 1 x 10(-5)% fipronil provided 100% kill of queens. In the continuous baiting, 0.5% boric acid, 1 x 10(-6)% fipronil, and 0.025% hydramethylnon provided 100% mortality of workers. The queens and workers provided baits containing 1 x 10(-5)% fipronil and 0.5% boric acid all died within 14 d. Low concentrations of fipronil and boric acid in sucrose may be promising candidates for Argentine ant control.

Catecholamines, dopamine and the renal kallikrein-kinin system may participate in the pathogenesis of hypertension. In the past these systems have been studied independently in isolation. Attempts to study the systems together have been hampered by incompatibility of the current urine preservatives for the two assays involved. In order to measure acid-stable catecholamines and acid-labile kallikrein enzyme together, we have established boric acid solution as a preservative by comparing the stability of urinary catecholamines stored in it with the commonly employed preservative, hydrochloric acid (HCl) as well as the stability of urinary kallikrein in untreated urine with and without boric acid at ambient temperatures for 24 and 48 h, and at -20 degrees C for 2 weeks and 1, 2 and 3 months. The stability of other common urine parameters including cortisol, electrolytes, creatinine and protein, was also investigated after storage with boric acid at ambient temperature for 24 h. Our results showed that there was a good agreement between the measurements of urinary catecholamines stored in both HCl and boric acid and that the latter did not interfere with measurements of urinary kallikrein or other common urine parameters.

The electrophoretic mobilities of DNA molecules in three different molecular weight ladders were measured in polyacrylamide gels containing different acrylamide concentrations (%T) and cross-linker ratios (%C), cast and run in Trisacetate-EDTA (TAE) buffer. The apparent pore radius of each gel was estimated from Ferguson plots of the relative mobilities of each of the DNA molecules, using the mobility of the monomer fragment in each molecular weight ladder as the reference mobility. The effective size of each of the DNA molecules was estimated from its radius of gyration. The apparent gel pore radii calculated in this manner ranged from 21 nm in gels containing 10.5%T, 5%C to 200 nm in gels with 4.6%T, 2%C, similar to the values observed for polyacrylamide gels cast and run in Tris-borate-EDTA (TBE) buffer (Holmes and Stellwagen, Electrophoresis 1991, 12, 612-619). Hence, the effective pore size of polyacrylamide gels is essentially independent of whether the gels are cast and run in TAE or TBE buffer.

Borate products varied in efficacy against larval cat fleas, Ctenocephalides felis felis Bouché, with some effective at rates of 23 micrograms/cm2 when larvae were exposed to the compounds in sand. Powdered boric acid, granular boric acid, and disodium octaborate tetrahydrate (Polybor) at rates of 200 micrograms/cm2 produced < or = 90% mortality of larvae exposed in carpet for 96 h. LC50 values of larvae exposed in treated carpets for 96 h were 23 micrograms/cm2 for powdered boric acid, 40 micrograms/cm2 for granular boric acid, and 47 micrograms/cm2 for polybor.

Gel and paste bait formulations containing boric acid or hydramethylnon were evaluated in field and laboratory experiments with the German cockroach, Blattella germanica (L.). Bait formulations contained 14-62% water by weight and lost the most water after 1 d of desiccation. Bait age and water content did not alter the toxicity (LT50) of boric acid-based baits. Toxicity of hydramethylnon (Maxforce) bait, however, increased with bait age. In continuous exposure tests without harborage, boric acid formulations had LT50s of 8.5 and 10.1 d for Blue Diamond and IT WORKS, respectively. Maxforce bait had an LT50 of 4.2 d. LT50s determined with cardboard harborage or in Ebeling choice boxes were 1.5 to 2.2 times lower than those from continuous exposure tests without harborage. Relative repellency, measured as the mean percent of live cockroaches in the light side of the choice box, was greatest for IT WORKS (21.4%) and Maxforce (25.4%) formulations, followed by Blue Diamond (10.9%). A performance index that combined choice box repellency and mortality data indicated that Maxforce had the greatest potential for field effectiveness. Blue Diamond and Maxforce significantly reduced German cockroach populations in the field. Maxforce performed best in field trials when applied at 10 or 20 placements per apartment. Apartments treated with IT WORKS had significantly greater cockroach trap catches. Factors that may affect the predictive power of the performance index are discussed.

Borate/boric acid solutions have distinctive effects on the absorption and fluorescence emission spectra of dityrosine. In the presence of excess borate/boric acid, the fluorescence emission maximum of the singly ionized dityrosine chromophore shifts from 407 nm (quantum yield = 0.80) to 374 nm (quantum yield = 0.14). Fluorescence measurements performed as a function of pH and concentration are consistent with a 1:1 complex which may dissociate to either boric acid and singly ionized dityrosine (K1 = 17 mM) or to monoborate ion and unionized dityrosine (K2 = 0.10 mM). As a consequence of the pKa values characteristic of dityrosine and boric acid, complex formation is maximal near pH 8. 2,2'-Dihydroxy-biphenyl shows similar interactions. The fluorescence of dityrosyl calmodulin (0 Ca2+) also responds to the addition of boric acid, giving K1 = 42 mM and K2 = 2 mM. Singly ionized dityrosine produced through dissociation occurring in the excited state does not interact with boric acid.