Search

In this study, we performed a kinetic analysis of CO-dependent H2 production by metabolically engineered Thermococcus onnurineus NA1, MC01 in terms of the cell activity as well as mass transfer rate. We conducted continuous cultures with varying dilution rate, CO flow rate, or agitation speed. Despite oscillations in cell density, the cultures reached steady states at all operating conditions. As the dilution rate increased from 0.1 to 0.3 h−1, specific activity of H2 production (SAHP) and volumetric cell production rate were linearly increased. Also, the SAHP remained almost constant at the fixed dilution rate of 0.3 h−1 even though the CO transfer rate was changed by adjusting the CO flow rate or the agitation speed. This relationship could be expressed as a typical Luedeking-Piret model, implying that high cell density culture with a sufficient growth rate is essential to obtain higher H2 productivity. On the other hand, more elevated CO transfer at the same dilution rate improved H2 production rate (HPR) by the increase of the cell density, not in the rise of SAHP. Through the continuous culture, 108 mmol/g-cell/h and 121 mmol/L/h of SAHP and HPR, respectively, could be achieved at a dilution rate of 0.3 h−1 with CO supply rate of 0.07 vvm and agitation speed of 700 rpm. Considering high H2 production activity and long-term stability of the strain over 1,000 h, MC01 is confirmed to have an outstanding potential for CO-dependent H2 production.

Hydrogen has been receiving considerable attention as a clean energy carrier. Thermococcus onnurineus NA1, a hyperthermophilic archaeon, is capable of producing hydrogen using carbon monoxide (CO) in a growth-associated manner, providing a promising platform to upcycle industrial waste gases. In order to improve cost-effectiveness of the biological hydrogen production from carbon monoxide (CO), we developed formulation of a low-cost medium for T. onnurineus 156T by substituting fishmeal and sea salt for yeast extract (YE) and reagentgrade salts, respectively. In serum bottle cultures, hydrogen production by the 156T strain was less than 30% in fishmeal-containing media when compared to that of the YE-containing MM1 medium. However, hydrogen production was increased substantially by adaptive evolution in the fishmeal-sea salt (FMSS) medium. In bioreactor experiments, the resulting strain 156T-FA showed shorter lag phase and 70% higher maximum hydrogen production rate in FMSS medium than the parent strain 156T. Our results showed that the H2 production cost was reduced by ca. 95%, when YE and chemical salts were replaced by fishmeal and sea salt, respectively.

Volume 86, no. 6, AEM02630-19, 2020, [https://doi.org/10.1128/AEM.02630-19][1]. Page 9: The following reference should read as shown. 11. Susanti D, Loganathan U, Mukhopadhyay B. 2016. A novel F420-dependent thioredoxin reductase gated by low potential FAD: a tool for redox regulation in an

To date, NAD(P)H, ferredoxin, and coenzyme F420 have been identified as electron donors for thioredoxin reductase (TrxR). In this study, we present a novel electron source for TrxR. In the hyperthermophilic archaeon Thermococcus onnurineus NA1, the frhAGB-encoded hydrogenase, a homolog of the F420-reducing hydrogenase of methanogens, was demonstrated to interact with TrxR in coimmunoprecipitation experiments and in vitro pulldown assays. Electrons derived from H2 oxidation by the frhAGB-encoded hydrogenase were transferred to TrxR and reduced Pdo, a redox partner of TrxR. Interaction and electron transfer were observed between TrxR and the heterodimeric hydrogenase complex (FrhAG) as well as the heterotrimeric complex (FrhAGB). Hydrogen-dependent reduction of TrxR was 7-fold less efficient than when NADPH was the electron donor. This study not only presents a different type of electron donor for TrxR but also reveals new functionality of the frhAGB-encoded hydrogenase utilizing a protein as an electron acceptor.IMPORTANCE This study has importance in that TrxR can use H2 as an electron donor with the aid of the frhAGB-encoded hydrogenase as well as NAD(P)H in T. onnurineus NA1. Further studies are needed to explore the physiological significance of this protein. This study also has importance as a significant step toward understanding the functionality of the frhAGB-encoded hydrogenase in a nonmethanogen; the hydrogenase can transfer electrons derived from oxidation of H2 to a protein target by direct contact without the involvement of an electron carrier, which is distinct from the mechanism of its homologs, F420-reducing hydrogenases of methanogens.

The F420-reducing hydrogenase of methanogens functions in methanogenesis by providing reduced coenzyme F420 (F420H2) as an electron donor. In non-methanogens, however, their physiological function has not been identified yet. In this study, we constructed an ΔfrhA mutant, whose frhA gene encoding the hydrogenase α subunit was deleted, in the non-methanogenic Thermococcus onnurineus NA1 as a model organism. There was no significant difference in the formate-dependent growth between the mutant and the wild-type strains. Interestingly, the mutation in the frhA gene affected the expression of genes involved in various cellular functions such as H2 oxidation, chemotactic signal transduction, and carbon monoxide (CO) metabolism. Among these genes, the CO oxidation gene cluster, enabling CO-dependent growth and H2 production, showed a 2.8- to 7.0-fold upregulation by microarray-based whole transcriptome expression profiling. The levels of proteins produced by this gene cluster were also significantly increased not only under the formate condition but also under the CO condition. In a controlled bioreactor, where 100% CO was continuously fed, the ΔfrhA mutant exhibited significant increases in cell growth (2.8-fold) and H2 production (3.4-fold). These findings strongly imply that this hydrogenase is functional in non-methanogens and is related to various cellular metabolic processes through an unidentified mechanism. An understanding of the mechanism by which the frhA gene deletion affected the expression of other genes will provide insights that can be applied to the development of strategies for the enhancement of H2 production using CO as a substrate.

In this study, we developed a rapid and sensitive enzymatic assay for 2,3-butanediol (2,3-BDO) detection. The concentration of 2,3-BDO was determined by measuring the reduction of NADP(+) using Clostridium ljungdahlii 2,3-butanediol dehydrogenase (CL-Bdh). The enzymatic assay could detect as low as 0.01 mM of 2,3-BDO, while the high-performance liquid chromatography (HPLC) method required a much higher concentration than 0.15 mM. Gratifyingly, the developed method was 15 times more sensitive than the HPLC method. When the enzymatic assay was applied to high-throughput screening, the enzymatic assay detected 14 positive samples out of 23 tested, as compared to 8 by the HPLC method. These results suggest that the enzymatic assay is an effective screening method for the detection of 2,3-BDO-producing microbes in a microtiter plate-based format. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s13205-019-1705-9) contains supplementary material, which is available to authorized users.

The biosynthetic pathway of 2,3-butanediol (2,3-BDO) production from pyruvate under anaerobic conditions includes three enzymes: acetolactate synthase (ALS), acetolactate decarboxylase (ALDC), and acetoin reductase (AR). Recently, in anaerobic hyperthermophilic Pyrococcus furiosus, it has been reported that acetoin, a precursor of 2,3-BDO, is produced from pyruvate by ALS through a temperature-dependent metabolic switch. In this study, we first attempted to produce 2,3-BDO from Thermococcus onnurineus NA1 using a simple biosynthetic pathway by two enzymes (ALS and AR) at a high temperature. Two heterologous genes, acetolactate synthase (alsS) from Pyrococcus sp. NA2 and alcohol dehydrogenase (adh) from T. guaymacensis, were introduced and expressed in T. onnurineus NA1. The mutant strain produced approximately 3.3 mM 2,3-BDO at 80 °C. An acetyl-CoA synthetase IIIα (TON_1001) was further deleted to enhance 2,3-BDO production, and the mutant strain showed a 25% increase in the specific production of 2,3-BDO. Furthermore, when carbon monoxide (CO) gas was added as a reductant, specific production of 2,3-BDO increased by 45%. These results suggest a new biosynthetic pathway for 2,3-BDO and demonstrate the possibility of T. onnurineus NA1 as a platform strain for 2,3-BDO production at high temperatures.

Background The production of biohydrogen (H2) as a promising future fuel in anaerobic hyperthermophiles has attracted great attention because H2 formation is more thermodynamically feasible at elevated temperatures and fewer undesired side products are produced. However, these microbes require anoxic culture conditions for growth and H2 production, thereby necessitating costly and time-consuming physical or chemical methods to remove molecular oxygen (O2). Therefore, the development of an O2-tolerant strain would be useful for industrial applications. Results In this study, we found that the overexpression of frhAGB-encoding hydrogenase genes in Thermococcus onnurineus NA1, an obligate anaerobic archaeon and robust H2 producer, enhanced O2 tolerance. When the recombinant FO strain was exposed to levels of O2 up to 20% in the headspace of a sealed bottle, it showed significant growth. Whole transcriptome analysis of the FO strain revealed that several genes involved in the stress response such as chaperonin β subunit, universal stress protein, peroxiredoxin, and alkyl hydroperoxide reductase subunit C, were significantly up-regulated. The O2 tolerance of the FO strain enabled it to grow on formate and produce H2 under oxic conditions, where prior O2-removing steps were omitted, such as the addition of reducing agent Na2S, autoclaving, and inert gas purging. Conclusions Via the overexpression of frhAGB genes, the obligate anaerobic archaeon T. onnurineus NA1 gained the ability to overcome the inhibitory effect of O2. This O2-tolerant property of the strain may provide another advantage to this hyperthermophilic archaeon as a platform for biofuel H2 production. Electronic supplementary material The online version of this article (10.1186/s13068-019-1365-3) contains supplementary material, which is available to authorized users.

Among four basic mechanisms for biological hydrogen (H2) production, dark fermentation has been considered to show the highest hydrogen evolution rate (HER). H2 production from one-carbon (C1) compounds such as formate and carbon monoxide (CO) is promising because formate is an efficient H2 carrier, and the utilization of CO-containing syngas or industrial waste gas may render the industrial biohydrogen production process cost-effective. A variety of microbes with the formate hydrogen lyase (FHL) system have been identified from phylogenetically diverse groups of archaea and bacteria, and numerous efforts have been undertaken to improve the HER for formate through strain optimization and bioprocess development. CO-dependent H2 production has been investigated to enhance the H2 productivity of various carboxydotrophs via an increase in CO gas-liquid mass transfer rates and the construction of genetically modified strains. Hydrogenogenic CO-conversion has been applied to syngas and by-product gas of the steel-mill process, and this low-cost feedstock has shown to be promising in the production of biomass and H2. Here, we focus on recent advances in the isolation of novel phylogenetic groups utilizing formate or CO, the remarkable genetic engineering that enhances H2 productivity, and the practical implementation of H2 production from C1 substrates.

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalised to others. Amplification efficiency is lower in family B-type DNA polymerases than in family A-type (Taq) polymerases because of their strong 3'-5' exonuclease-activity. Here, we have red the exonuclease domain of the Thermococcus onnurineus NA1 (TNA1) DNA polymerase, especially Asn210 to Asp215 residues in Exo II motif (NXXXFD), to improve the processivity. N213D mutant protein had higher processivity and extension rate than the wild-type TNA1 DNA polymerase, retaining a lower mutation frequency than recombinant Taq DNA polymerase. Consequently, the N213D mutant could amplify target DNA up to 13.5 kb in length from human genomic DNA and 16.2 kb in length from human mitochondrial DNA while wild-type TNA1 amplified target DNA of 2.7 kb in length from human genomic DNA.

To overproduce biotechnologically valuable products, the expression level of target genes has been modulated by using strong promoters. In a hyperthermophilic archaeon Thermococcus onnurineus NA1, two promoters, PTN0413 and PTN0157, which drive expression of the genes encoding the S-layer protein and glutamate dehydrogenase were inserted in front of a gene cluster encoding a carbon monoxide dehydrogenase, a hydrogenase and a Na+/H+ antiporter. Two promoters exhibited strong activity by increasing the transcription and translation levels of the gene cluster in the mutant strains by 2.5- to 49-folds and 1.4- to 3.3-folds, respectively, than the native promoter in the wild-type strain. While KS0413 with PTN0413 promoter exhibited 2.7 to 4.7 times higher transcript level than KS0157 with PTN0157 promoter, the levels of proteins were a little different between them. The biomass concentrations and H2 production rates of two mutants were 2- to 3-fold higher than those of the wild-type strain in a bioreactor where CO was supplied at a flow rate of 120 ml min−1. Two mutants showed differential response to the higher CO flow rate, 240 ml min−1, in terms of growth pattern and product formation, indicating two promoters were regulated by culture conditions. The results demonstrate that not only promoter strength but also product-forming conditions should be considered in promoter engineering.

Genome organization near cyclomaltodextrinases (CDases) was analyzed and compared for four different hyperthermophilic archaea: Thermococcus, Pyrococcus, Staphylothermus, and Thermofilum. A gene (CL1_0884) encoding a putative CDase from Thermococcus sp. CL1 (tccd) was cloned and expressed in Escherichia coli. TcCD was confirmed to be highly thermostable, with optimal activity at 85℃. The melting temperature of TcCD was determined to be 93oC by both differential scanning calorimetry and differential scanning fluorimetry. A size-exclusion chromatography experiment showed that TcCD exists as a monomer. TcCD preferentially hydrolyzed α-cyclodextrin (α-CD), and at the initial stage catalyzed a ring-opening reaction by cleaving one α-1,4-glycosidic linkage of the CD ring to produce the corresponding single maltooligosaccharide. Furthermore, TcCD could hydrolyze branched CDs (G1-α-CD, G1-β- CD, and G2-β-CD) to yield significant amounts (45%, 40%, and 46%) of isomaltooligosaccharides (panose and 6(2)-α-maltosylmaltose) in addition to glucose and maltose. This enzyme is one of the most thermostable maltogenic amylases reported, and might be of potential value in the production of isomaltooligosaccharides in the food industry.

Hydrogenogenic CO oxidation (CO + H 2 O → CO 2 + H 2 ) has the potential for H 2 production as a clean renewable fuel. Thermococcus onnurineus NA1, which grows on CO and produces H 2 , has a unique gene cluster encoding the carbon monoxide dehydrogenase (CODH) and the hydrogenase. The gene cluster was identified as essential for carboxydotrophic hydrogenogenic metabolism by gene disruption and transcriptional analysis. To develop a strain producing high levels of H 2 , the gene cluster was placed under the control of a strong promoter. The resulting mutant, MC01, showed 30-fold-higher transcription of the mRNA encoding CODH, hydrogenase, and Na + /H + antiporter and a 1.8-fold-higher specific activity for CO-dependent H 2 production than did the wild-type strain. The H 2 production potential of the MC01 mutant in a bioreactor culture was 3.8-fold higher than that of the wild-type strain. The H 2 production rate of the engineered strain was severalfold higher than those of any other CO-dependent H 2 -producing prokaryotes studied to date. The engineered strain also possessed high activity for the bioconversion of industrial waste gases created as a by-product during steel production. This work represents the first demonstration of H 2 production from steel mill waste gas using a carboxydotrophic hydrogenogenic microbe.

Formate-dependent proton reduction to H 2 (HCOO − + H 2 O → HCO 3 − + H 2 ) has been reported for hyperthermophilic Thermococcus strains. In this study, a hyperthermophilic archaeon, Thermococcus onnurineus strain NA1, yielded H 2 accumulation to a partial pressure of 1 × 10 5 to 7 × 10 5 Pa until the values of Gibbs free energy change (Δ G ) reached near thermodynamic equilibrium (−1 to −3 kJ mol −1 ). The bioenergetic requirement for the metabolism to conserve energy was demonstrated by Δ G values as small as −5 kJ mol −1 , which are less than the biological minimum energy quantum, −20 kJ mol −1 , as calculated by Schink (B. Schink, Microbiol. Mol. Biol. Rev. 61:262-280, 1997). Considering formate as a possible H 2 storage material, the H 2 production potential of the strain was assessed. The volumetric H 2 production rate increased linearly with increasing cell density, leading to 2,820 mmol liter −1 h −1 at an optical density at 600 nm (OD 600 ) of 18.6, and resulted in the high specific H 2 production rates of 404 ± 6 mmol g −1 h −1 . The H 2 productivity indicates the great potential of T. onnurineus strain NA1 for practical application in comparison with H 2 -producing microbes. Our result demonstrates that T. onnurineus strain NA1 has a highly efficient metabolic system to thrive on formate in hydrothermal systems.

It has been proposed that family VIII carboxylesterases and class C β-lactamases are phylogenetically related; however, none of carboxylesterases has been reported to hydrolyze β-lactam antibiotics except nitrocefin, a nonclinical chromogenic substrate. Here, we describe the first example of a novel carboxylesterase derived from a metagenome that is able to cleave the amide bond of various β-lactam substrates and the ester bond of p -nitrophenyl esters. A clone with lipolytic activity was selected by functional screening of a metagenomic library using tributyrin agar plates. The sequence analysis of the clone revealed the presence of an open reading frame ( estU1 ) encoding a polypeptide of 426 amino acids, retaining an S-X-X-K motif that is conserved in class C β-lactamases and family VIII carboxylesterases. The gene was overexpressed in Escherichia coli , and the purified recombinant protein (EstU1) was further characterized. EstU1 showed esterase activity toward various chromogenic p -nitrophenyl esters. In addition, it exhibited hydrolytic activity toward nitrocefin, leading us to investigate whether EstU1 could hydrolyze β-lactam antibiotics. EstU1 was able to hydrolyze first-generation β-lactam antibiotics, such as cephalosporins, cephaloridine, cephalothin, and cefazolin. In a kinetic study, EstU1 showed a similar range of substrate affinities for both p -nitrophenyl butyrate and first-generation cephalosporins while the turnover efficiency for the latter was much lower. Furthermore, site-directed mutagenesis studies revealed that the catalytic triad of EstU1 plays a crucial role in hydrolyzing both ester bonds of p -nitrophenyl esters and amide bonds of the β-lactam ring of antibiotics, implicating the predicted catalytic triad of EstU1 in both activities.

To search for novel lipolytic enzymes, a metagenomic library was constructed from the tidal flat sediment of Ganghwa Island in South Korea. By functional screening using tributyrin agar plates, 3 clones were selected from among the 80,050 clones of the fosmid library. The sequence analysis revealed that those clones contained different open reading frames, which showed 50-57% amino acid identity with putative lipolytic enzymes in the database. Based on the phylogenetic analysis, they were identified to encode novel members, which form a distinct and new subfamily in the family IV of bacterial lipolytic enzymes. The consensus sequence, GT(S)SA(G)G, encompassing the active site serine of the enzymes was different from the GDSAG motif, conserved in the other subfamily. The genes were expressed in Escherichia coli and recombinant proteins were purified as active soluble forms. The enzymes showed the highest activity toward p-nitrophenyl valerate (C5) and exhibited optimum activities at mesophilic temperature ranges and slightly alkaline pH. In particular, the enzymes displayed salt tolerance with over 50% of the maximum activity remained in the presence of 3 M NaCl (or KCl). In this study, we demonstrated that the metagenomic approach using marine tidal flat sediment as a DNA source expanded the diversity of lipolytic enzyme-encoding genes.

As a continuous effort of developing highly enantioselective epoxide hydrolase from marine microorganisms, it was found that Maritimibacter alkaliphilus KCCM 42376 [corrected] was highly enantioselective toward racemic glycidyl phenyl ether (GPE). An open reading frame (ORF) encoding a putative epoxide hydrolase (EHase) was cloned from the genome of Maritimibacter alkaliphilus KCCM 42376 [corrected], followed by expression and purification in Escherichia coli. The purified EHase (REH) hydrolyzed (S)-GPE preferentially over (R)-GPE. Enantiopure (R)-GPE from kinetic resolution of 29.2 mM racemic GPE using the purified REH could be obtained with enantiopurity of more than 99.9% enantiomeric excess (ee) and 38.4% yield (theoretical, 50%) within 20 min (enantiomeric ratio (E-value): 38.4). The enantioselective activity of REH toward GPE was also confirmed by the analysis of the vicinal diol, 3-phenoxy-1,2-propanediol. To our knowledge, this study demonstrates the highest enantioselective resolution of racemic GPE using a purified biocatalyst among the known native EHases.

Vibrio sp. GMD509, a marine bacterium isolated from eggs of the sea hare, exhibited lipolytic activity on tributyrin (TBN) plate, and the gene representing lipolytic activity was cloned. As a result, an open reading frame (ORF) consisting of 1,017 bp (338 aa) was found, and the deduced amino acid sequence of the ORF showed low similarity (20%) to alpha/beta hydrolases such as dienelactone hydrolases and esterase/lipase with G-X(1)-S-X(2)-G sequence conserved. Phylogenetic analysis suggested that the protein belonged to a new family of esterase/lipase together with various hypothetical proteins. The enzyme was overexpressed in Escherichia coli and purified to homogeneity. The purified enzyme (Vlip509) showed the best hydrolyzing activity toward p-nitrophenyl butyrate (C(4)) among various p-nitrophenyl esters (C(2) to C(18)), and optimal activity of Vlip509 occurred at 30 degrees C and pH 8.5, respectively. Kinetic parameters toward p-nitrophenyl butyrate were determined as K (m) (307 muM), k (cat) (5.72 s(-1)), and k (cat)/K (m) (18.61 s(-1) mM(-1)). Furthermore, Vlip509 preferentially hydrolyzed the S-enantiomer of racemic ofloxacin ester. Despite its sequence homology to dienelactone hydrolase, Vlip509 showed no dienelactone hydrolase activity. This study represents the identification of a novel lipolytic enzyme from marine environment.

A metagenomics approach is an efficient method of isolating novel and useful genes from uncultured microorganisms in diverse environments. In this research, a gene encoding a new esterase (EM2L8) was cloned and characterized from the metagenomic DNA library of a deep-sea sediment. The gene consisted of 804bp encoding a polypeptide of 267 amino acids with a molecular mass of 28,952. The deduced amino acid sequence showed similarities with the BioH of Kurthia, the 3-oxoadipate enol-lactonase of Haloarcula and the acyltransferase of Thermoanaerobacter, which feature identities of 38%, 32%, and 33%, respectively. Residues essential for esterase activity, such as pentapeptide (GXSXG) and catalytic triad sequences, were uncovered. While the protein was overproduced mainly as inclusion body at 37 degrees C, it was mainly produced as a soluble active enzyme at 18 degrees C. A zymogram analysis revealed that purified EM2L8 taken from the soluble fraction could hydrolyze tributyrin substrate. Furthermore, the protein from the inclusion body fraction also showed strong activity on gel, thus indicating that the protein was refolded during SDS-gel electrophoresis and the ensuing incubation period. When the inclusion body was mixed with some anionic detergent solutions and diluted with a non-detergent buffer, the insoluble EM2L8 refolded rapidly and recovered its full esterase activity. Although EM2L8 had an optimum temperature of 50-55 degrees C, its activation energy in the range of 10-40 degrees C was 8.34kcal/mol, indicating that it is a cold-adapted enzyme. Moreover, it was found to have an optimum pH of 10-11, thus revealing that it is an alkaline enzyme. In this paper, the new esterase EM2L8 buried in a deep-sea sediment became known on the surface and was characterized biochemically.

The prolyl oligopeptidase TNA1_POP was found to be encoded in the genome of the hyperthermophilic archaeon Thermococcus sp. NA1 and showed high similarities to its archaeal homologs (76-83%). The enzyme was found to be a single polypeptide composed of 616 amino acids with conserved signature domains. A recombinant TNA1_POP expressed in Escherichia coli was capable of hydrolyzing succinyl-Ala-Pro-p-nitroanilide (Suc-Ala-Pro-pNA) with temperature and pH optimums of 80 degrees C and 7, respectively. TNA1_POP activity appeared to be significantly activated by pre-incubation at 80 degrees C and 90 degrees C with the optimum temperature unchanged. The heat-activated enzyme exhibited a k(cat) approximately twofold higher than that of the unheated enzyme, however, both enzymes showed the same K(m). TNA1_POP was thermostable at 80 degrees C retaining 80% of its heat-activated activity even after 23 h, but it lost its enzymatic activity at 90 degrees C with a half-life of 3 h. The loss of the enzymatic activity at 90 degrees C seemed to be caused by the autodegradation of the enzyme, not by thermal denaturation, as supported by circular dichroism spectropolarimetry. Autodegradation fragments ranging from 2 to 18 kDa were mapped by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry.

To develop an enantioselective lipase/esterase hydrolyzing racemic ofloxacin ester to levofloxacin, samples were collected from a variety of marine environments such as cold sea, hydrothermal vent area, sediment, tidal flat area, arctic sea, marine organisms, and so on. Microorganisms were isolated by plating on an enrichment medium with simultaneous detection of lipolytic activities and screened for the hydrolysis of ofloxacin ester. Three candidates among isolates were selected, and one of them, identified as Yarrowia lipolytica CL180, hydrolyzed preferentially S-enantiomer of racemic ofloxacin ester. The lipase/esterase gene (yli180) was cloned by screening a genomic library. The sequence analysis revealed an open reading frame consisting of 1,431 bp that encoded a protein of 476 amino acids with a molecular mass of 53 kDa. The yli180 gene was expressed in Escherichia coli and purified to homogeneity. The optimum activity of the recombinant protein (rYli180) occurred at pH 7.5 and 35 degrees C, respectively. rYli180 preferentially hydrolyzed p-nitrophenyl esters of fatty acids with short chain lengths ofor =10 carbon atoms. This study represents a novel esterase of type B1 carboxylesterase/lipase family from a marine isolate, showing a potential usage as a biocatalyst because of enantioselectivity toward racemic ofloxacin ester.

The family B DNA polymerase gene from the euryarchaeon Thermococcus barophilus Ch5 (Tba5) contains an open reading frame of 6198 base pairs that encodes 2065 amino acid residues. The gene is split by three inteins that must be spliced out to form the mature DNA polymerase. A Tba5 DNA polymerase gene without inteins (genetically intein-spliced) was expressed under the control of the pET-28b(+)T7lac promoter in E. coli Rosetta 2(DE3)pLysS cells. The molecular mass of the purified Tba5 DNA polymerase was about 90kDa consistent with the 90,470Da molecular mass calculated based on the 776 amino acid sequence. The optimal pH for Tba5 DNA polymerase activity was 7.5 and the optimal temperature was 70-75°C. The enzyme possessed 3'→5' exonuclease activity and was activated by magnesium ions. PCR amplification using Tba5 DNA polymerase enables high-yield for 1- to 6-kb target DNA products, while 8- to 10-kb target DNA products were amplified at low or inefficient levels. To simultaneously improve product yield and amplification fidelity, Tba5 plus DNA polymerase mixtures were constituted with various amounts of Tba5 DNA polymerase mixed with Taq DNA polymerase. The Tba5 plus DNA polymerase mixtures robustly amplified up to 25-kb λ DNA fragments. In addition, the PCR error rate of Tba5 plus3 and Tba5 plus4 mixtures were much lower than those of wild-type Tba5 DNA polymerase, Pfu DNA polymerase, Taq DNA polymerase, and Pfu plus DNA polymerase.

Extracellular vesicles (EVs) produced by a sulfur-reducing, hyperthermophilic archaeon, “ Thermococcus onnurineus ” NA1 T , were purified and characterized. A maximum of four EV bands, showing buoyant densities between 1.1899 and 1.2828 g cm −3 , were observed after CsCl ultracentrifugation. The two major EV bands, B (buoyant density at 25°C [ρ 25 ] = 1.2434 g cm −3 ) and C (ρ 25 = 1.2648 g cm −3 ), were separately purified and counted using a qNano particle analyzer. These EVs, showing different buoyant densities, were identically spherical in shape, and their sizes varied from 80 to 210 nm in diameter, with 120- and 190-nm sizes predominant. The average size of DNA packaged into EVs was about 14 kb. The DNA of the EVs in band C was sequenced and assembled. Mapping of the T. onnurineus NA1 T EV (ToEV) DNA sequences onto the reference genome of the parent archaeon revealed that most genes of T. onnurineus NA1 T were packaged into EVs, except for an ∼9.4-kb region from TON_0536 to TON_0544. The absence of this specific region of the genome in the EVs was confirmed from band B of the same culture and from bands B and C purified from a different batch culture. The presence of the 3′-terminal sequence and the absence of the 5′-terminal sequence of TON_0536 were repeatedly confirmed. On the basis of these results, we hypothesize that the unpackaged part of the T. onnurineus NA1 T genome might be related to the process that delivers DNA into ToEVs and/or the mechanism generating the ToEVs themselves.

Genomic analysis of a hyperthermophilic archaeon, Thermococcus sp. NA1, revealed the presence of an 1,497 bp open reading frame, encoding a protein of 499 amino acids. The deduced amino acid sequence was similar to thermostable carboxypeptidase 1 from Pyrococcus furiosus, a member of peptidase family M32. Five motifs, including the HEXXH motif with two histidines coordinated with the active site metal, were conserved. The carboxypeptidase gene was cloned and overexpressed in Escherichia coli. Molecular masses assessed by SDS-PAGE and gel filtration were 61 kDa and 125 kDa respectively, which points to a dimeric structure for the recombinant enzyme, designated TNA1_CP. The enzyme showed optimum activity toward Z-Ala-Arg at pH 6.5 and 70-80 degrees C (k(cat)/K(m)=8.3 mM(-1) s(-1)). In comparison with that of P. furiosus CP (k(cat)/K(m)=667 mM(-1) s(-1)), TNA1_CP exhibited 80-fold lower catalytic efficiency. The enzyme showed broad substrate specificity with a preference for basic, aliphatic, and aromatic C-terminal amino acids. This broad specificity was confirmed by C-terminal ladder sequencing of porcine N-acetyl-renin substrate by TNA1_CP.

Genomic analysis of a hyperthermophilic archaeon, Thermococcus sp. strain NA1, revealed the presence of a 1,068-bp open reading frame encoding a protein consisting of 356 amino acids with a calculated molecular mass of 39,714 Da (GenBank accession no. DQ144132). Sequence analysis showed that it was similar to the putative aminopeptidase P (APP) of Thermococcus kodakaraensis KOD1. Amino acid residues important for catalytic activity and the metal binding ligands conserved in bacterial, nematode, insect, and mammalian APPs were also conserved in the Thermococcus sp. strain NA1 APP. The archaeal APP, designated TNA1_APP ( Thermococcus sp. strain NA1 APP), was cloned and expressed in Escherichia coli . The recombinant enzyme hydrolyzed the amino-terminal Xaa-Pro bond of Lys( N ε -Abz)-Pro-Pro-pNA and the dipeptide Met-Pro ( K m , 0.96 mM), revealing its functional identity. Further enzyme characterization showed the enzyme to be a Co 2+ -, Mn 2+ -, or Zn 2+ -dependent metallopeptidase. Optimal APP activity with Met-Pro as the substrate occurred at pH 5 and a temperature of 100°C. The APP was thermostable, with a half-life of >100 min at 80°C. This study represents the first characterization of a hyperthermophilic archaeon APP.

The effects of growth rate and nutrient uptake rate on the production of cephamycin C were determined in the parental strain, ΔrelA mutant, and Δrsh null mutant of S. clavuligerus . Production of cephamycin C was inversely related to mycelium growth and the phosphate feed rate was more critical for the production of cephmycin C. On the contrary, the production of cephamycin C was completely abolished in the ΔrelA mutant, but not in Δrsh mutant. The changes in the cephamycin C production by disruption of the relA and rsh genes are presumably associated with the consequent ability of the mutants to accumulate (p)ppGpp under nutrient starvation. Therefore, it is concluded that the stringent response of S. clavuligerus to starvation for nutrients is governed mainly by RelA rather than Rsh and that the response is more apparently regulated by the limitation of phosphate.

A strong promoter increases transcription of the genes of interest and enhances the production of various valuable substances. For a hyperthermophilic archaeon Thermococcus onnurineus NA1, which can produce H2 from carbon monoxide oxidation, we searched for a novel endogenous strong promoter by transcriptome analysis using high-throughput RNA sequencing. Based on the relative transcript abundance, we selected one promoter to encode a hypothetical gene, of which homologs were found only in several Thermococcales strains. This promoter, P TN0510 , was introduced into the front of CO-responsible hydrogenase gene cluster encoding a carbon monoxide dehydrogenase (CODH), a hydrogenase, and a Na+/H+ antiporter. In the resulting mutant strain, KS0510, transcription and translation level of the gene cluster increased by 4- to 14-folds and 1.5- to 1.9-folds, respectively, in comparison with those of the wild-type strain. Additionally, H2 production rate of KS0510 mutant was 4.8-fold higher than that of the wild-type strain. The P TN0510 was identified to be much stronger than the well-known two strong promoters, gdh and slp promoters from Thermococcus strains, through RT-qPCR and Western blotting analyses and kinetics of H2 production. In this study, we demonstrated that the RNA-seq approach is a good strategy to mine novel strong promoters of use to a Thermococcus strain when developed as a biotechnologically promising strain to produce valuable products such as enzymes and metabolites through metabolic engineering.

Hyperthermophilic archaeon, Thermococcus onnurineus NA1 was reported to grow on formate producing hydrogen (H2). In this study, to sustain high H2 production rate and demonstrate the feasibility of mass production of H2, high cell density cultivation of T. onnurineus NA1 on sodium formate was employed under optimized conditions. From batch cultures, it was observed that the salinity of medium, significantly changed by the addition of formate salt and pH-adjusting agent, crucially affected cell growth and H2 production. With salinity carefully controlled between 3.7 and 4.6 %, 400 mM sodium formate was found to be an optimal initial concentration for maximizing cell growth-associated H2 production. Under optimal conditions, the repeated batch culture with cell recycling showed high cell density of OD600 of 1.7 in 3 and 30 L bioreactor, and the volumetric H2 production rate was enhanced up to 235.7 mmol L(-1) h(-1), which is one of the highest values reported to date.

Previously we reported that an epoxide hydrolase (EHase) from Novosphingobium aromaticivorans could preferentially hydrolyze (R)-styrene oxide. In this study, we demonstrate that the purified NEH could be also effective in chiral resolution of racemic epichlorohydrin (ECH). Particularly, the purified NEH showed excellent hydrolyzing activity toward ECH to complete the reaction at a short period of incubation time. Enantiopure (S)-ECH could be obtained with a high enantiopurity of more than 99.99% enantiomeric excess (ee) and yield of 20.7% (theoretical, 50%). The chiral resolution of the purified NEH toward ECH was not susceptible to substrate inhibition by 500 mM racemic ECH.

The morphological differentiation of Streptomyces albidoflavus SMF301 in a batch culture was analyzed by pyrolysis-mass spectrometry (PyMS). Curie point pyrolysis mass spectra of whole cells at various growth phases were obtained. The PyMS spectra varied with growth phase and differentiation. It was possible to distinguish differentiation states with multivariate statistics and artificial neural network (ANN). Artificial neural networks (ANNs) were trained on PyMS data to predict the differentiation state using two different algorithms: backpropagation and a radial basis function classifier. Both the backpropagation and the radial-basis classifier succeeded in separating the differentiation state and identified the transient state.

We developed one-step sequence- and ligation-independent cloning (SLIC) as a simple, cost-effective, time-saving, and versatile cloning method. Highly efficient and directional cloning can be achieved by direct bacterial transformation 2.5 min after mixing any linearized vector, an insert(s) prepared by PCR, and T4 DNA polymerase in a tube at room temperature.

The hyperthermophilic archaeon, Thermococcus onnurineus, was grown in media supplemented with either CO, formate, or starch. H(2) was produced with each substrate with respective maximum rates of 1.55, 3.83 and 2.66 mmol H(2)/l h. The yields (mol H(2)/mol substrate) were 0.98, 1 and 3.13, respectively. This microbe is the first example where a single microorganism can grow and produce H(2) using CO, formate or starch as substrate.

Metagenomic library was constructed from a deep-sea sediment sample and screened for lipolytic activity. Open-reading frames of six positive clones showed only 33–58% amino acid identities to the known proteins. One of them was assigned to a new group while others were grouped into Families I and V or EstD Family. By employing a combination of approaches such as removing the signal sequence, coexpression of chaperone genes, and low temperature induction, we obtained five soluble recombinant proteins inEscherichia coli. The purified enzymes had optimum temperatures of 30–35°C and the cold-activity property. Among them, one enzyme showed lipase activity by preferentially hydrolyzingp-nitrophenyl palmitate andp-nitrophenyl stearate and high salt resistance with up to 4 M NaCl. Our research demonstrates the feasibility of developing novel lipolytic enzymes from marine environments by the combination of functional metagenomic approach and protein expression technology.

In silico analysis of group 4 [NiFe]-hydrogenases from a hyperthermophilic archaeon, Thermococcus onnurineus NA1, revealed a novel tripartite gene cluster consisting of dehydrogenase-hydrogenase-cation/proton antiporter subunits, which may be classified as the new subgroup 4b of [NiFe]-hydrogenases-based on sequence motifs.

The enormous pool of biodiversity in marine ecosystems is an excellent natural reservoir for acquiring an inventory of enzymes with potential for biotechnological applications. Moreover, the opportunity for sustainable resource management has been greatly enhanced by recent advances in culturing methods for recalcitrant microbes. In this review, we will focus primarily on successful examples in culturing marine microbes and provide an overview of work examining the biotechnological potential of the marine reservoir, mainly through genomic strategies, such as activity-based functional screening of genomic and metagenomic libraries and homology-driven screening of enormous amounts of sequence data.

A gene encoding a putative epoxide hydrolase (EHase) was identified by analyzing an open reading frame of the genome sequence of Novosphingobium aromaticivorans, retaining the conserved catalytic residues such as the catalytic triad (Asp177, Glu328, and His355) and the oxyanion hole. The enantioselective EHase gene (neh) was cloned, and the recombinant EHase could be purified to apparent homogeneity by one step of metal affinity chromatography and further characterized. The purified N. aromaticivorans enantioselective epoxide hydrolase (NEH) showed enantioselective hydrolysis toward styrene oxide, glycidyl phenyl ether, epoxybutane, and epichlorohydrin. The optimal EHase activity toward styrene oxide occurred at pH 6.5 and 45 degrees C. The purified NEH could preferentially hydrolyze (R)-styrene oxide with enantiomeric excess of more than 99% and 11.7% yield after 20-min incubation at an optimal condition. The enantioselective hydrolysis of styrene oxide was also confirmed by the analysis of the vicinal diol, 1-phenyl-1,2-ethanediol. The hydrolyzing rates of the purified NEH toward epoxide substrates were not affected by as high as 100 mM racemic styrene oxide.

To search for new cold-active lipases, a metagenomic library was constructed using cold-sea sediment samples at Edison Seamount and was screened for lipolytic activities by plating on a tricaprylin medium. Subsequently, a fosmid clone was selected, and the whole sequence of 36 kb insert of the fosmid clone was determined by shotgun sequencing. The sequence analysis revealed the presence of 25 open reading frames (ORF), and ORF20 (EML1) showed similarities to lipases. Phylogenetic analysis of EML1 suggested that the protein belonged to a new family of esterase/lipase together with LipG. The EML1 gene was expressed in Escherichia coli, and purified by metal-chelating chromatography. The optimum activity of the purified EML1 (rEML1) occurred at pH 8.0 and 25 degrees C, respectively, and rEML1 displayed more than 50% activity at 5 degrees C. The activation energy for the hydrolysis of olive oil was determined to be 3.28 kcal/mol, indicating that EML1 is a cold-active lipase. rEML1 preferentially hydrolyzed triacylglycerols acyl-group chains with long chain lengths ofor = 8 carbon atoms and displayed hydrolyzing activities toward various natural oil substrates. rEML1 was resistant to various detergents such as Triton X-100 and Tween 80. This study represents an example which developed a new cold-active lipase from a deep-sea sediment metagenome.

Previously, we reported that ten strains belonging to Erythrobacter showed epoxide hydrolase (EHase) activities toward various epoxide substrates. Three genes encoding putative EHases were identified by analyzing open reading frames of Erythrobacter litoralis HTCC2594. Despite low similarities to reported EHases, the phylogenetic analysis of the three genes showed that eeh1 was similar to microsomal EHase, while eeh2 and eeh3 could be grouped with soluble EHases. The three EHase genes were cloned, and the recombinant proteins (rEEH1, rEEH2, and rEEH3) were purified. The functionality of purified proteins was proved by hydrolytic activities toward styrene oxide. EEH1 preferentially hydrolyzed (R)-styrene oxide, whereas EEH3 preferred to hydrolyze (S)-styrene oxide, representing enantioselective hydrolysis of styrene oxide. On the other hand, EEH2 could hydrolyze (R)- and (S)-styrene oxide at an equal rate. The optimal pH and temperature for the EHases occurred largely at neutral pHs and 40-55 degrees C. The substrate selectivity of rEEH1, rEEH2, and rEEH3 toward various epoxide substrates were also investigated. This is the first representation that a strict marine microorganism possessed three EHases with different enantioselectivity toward styrene oxide.

Genomic analysis of a hyperthermophilic archaeon, Thermococcus sp. NA1, revealed an ORF of 1689 bases encoding 562 amino acids that showed a high similarity to DNA ligases from other hyperthermophilic archaea. The ligase, which was designated TNA1_lig (Thermococcus sp. NA1 ligase), was cloned and expressed in Escherichia coli. The recombinant TNA1_lig was purified by metal affinity chromatography. The optimum ligase activity of the recombinant TNA1_lig occurred at 80 degrees C and pH 7.5. The enzyme was activated by MgCl2 and ZnCl2 but was inhibited by MnCl2 and NiCl2. Additionally, the enzyme was activated by either ATP or NAD+.