Search

Cervical cancer is a life-threatening complication, appearing as the uncontrolled growth of abnormal cells in the lining of the cervix. Every year, increasing numbers of cervical cancer cases are reported worldwide. Different identification strategies were proposed to detect cervical cancer at the earlier stages using various biomarkers. Squamous cell carcinoma antigen (SCC-Ag) is one of the potential biomarkers for this diagnosis. Nanomaterial-based detection systems were shown to be efficient with different clinical biomarkers. In this study, we have demonstrated strontium oxide-modified interdigitated electrode (IDE) fabrication by the sol-gel method and characterized by scanning electron microscopy and high-power microscopy. Analysis of the bare devices indicated the reproducibility with the fabrication, and further pH scouting on the device revealed that the reliability of the working pH ranges from 3 to 9. The sensing surface was tested to detect SCC-Ag against its specific antibody; the detection limit was found to be 10 pM, and the sensitivity was in the range between 1 and 10 pM as calculated by 3σ. The specificity experiment was carried out using major proteins from human serum, such as albumin and globulin. SCC-Ag was shown to be selectively detected on the strontium oxide-modified IDE surface. [ABSTRACT FROM AUTHOR]

• Microfluidic devices evolved as low-cost, simple, and powerful analytical platform. • Reviewed on microfluidic biosensor array for monoplex and multiplex detections. • Can detect urine glucose, lactate, uric acid and other biomarkers at point of care. • Important molecular tool for academic research as well as clinical diagnosis. • Exceptionally specific, easy to use, and inexpensive for high-performance analysis. Microfluidic devices have evolved into low-cost, simple, and powerful analytical tool platforms. Herein, an electrochemically-based microfluidic nanobiosensor array for monoplex and multiplex detection of physiologically relevant analytes is reviewed. Unlike other analyte detection methods, microfluidics-based embedded electrochemical nanobiosensors are portable, custom electrochemical readers for signal reading. Microfluidic devices and electrochemical sensors can be integrated into monoplex or multiplex systems. The integrated system is simple to use and sensitive, and so has great potential as a powerful tool for profiling immune-mediated treatment responses in real time. It may also be developed further as a point-of-care diagnostic device for conducting near-patient tests using biological samples. Therefore, using mutiplex analysis, a biosensor array may detect multiple analytes in a sample solution and provide different outputs for each analyte. A microfluidic electrochemical nanobiosensor, for example, can detect urine glucose, lactate, and uric acid. The microfluidic array of integrated nanobiosensors and electrochemical sensors enables fast and cost-effective selection of high-quality and statistically significant diagnostic data at the point of care. The multiplex analytical test is an important molecular tool for academic research as well as clinical diagnosis. Although key approaches for analysing numerous analytes have been developed, none of them are suitable for point-of-care diagnostics, especially in situations with limited resources. In this study, monoplex and multiplex microfluidic assays for rapid measurement of single and multiple analytes at the point of care are presented. Since this test can analyse both single and multiple analytes, it is exceptionally specific, easy to use, and inexpensive. The ability of integrated electrochemical-based microfluidic devices with single channel and multiple channels systems to perform monoplex and multiplex analysis simultaneously and independently is the novelty of this review. [Display omitted] [ABSTRACT FROM AUTHOR]

The authors describe an electrochemical method for the determination of the blood clotting factor IX (FIX). A nanogapped dielectrode (with a < 100 nm junction) was modified with antibody against FIX, and the resulting system was characterized by both impedance spectroscopy and voltammetry. In order to attain the improved sensitivity, gold nanoparticles were electrostatically attached to FIX. The current to voltage (I-V) measurement was carried out from 1 V to 5 V, where the entire calibration plot with 5 V was taken. This results in a limit of detection as low of 1 pM, which is much lower compared to the real concentration of FIX (87 nM) in human blood serum. The analytical range extends from 1 pM to 0.1 μM. The electrode is highly specific over other serum proteins. [ABSTRACT FROM AUTHOR]

Oral squamous cell carcinoma (OSCC) remains a significant global challenge in the medical field, accounting for approximately 300,000 incidences and 145,000 mortalities annually. Studies suggest that early cancer detection is the most vital factor in improving OSCC patient outcomes. Effective clinical diagnosis methods for early OSCC are needed urgently. OSCC biomarkers are identified to be associated with cancer progression and biosensors are devices developed to detect the presence of OSCC biomarkers to allow early cancer diagnosis. Biosensor technology has significant potential in providing rapid and accurate detection of OSCC biomarkers with high sensitivity and specificity. Biosensors have various advantages compared to conventional diagnostic methods such as being non-invasive, low-cost, and convenient. Biosensors hold the potential to be adopted as point-of-care-testing (POCT) devices by bringing biosensor technology to the patients. This review aims to provide a comprehensive review by describing and comparing different categories of OSCC biosensors based on their advantages and drawbacks. The recent obstacles and opportunities for developing effective biosensors for cancer diagnosis are summarized. • Oral squamous cell carcinoma (OSCC) remains a significant global challenge. • Effective clinical diagnosis methods for early OSCC are needed urgently. • OSCC biomarkers are identified to be associated with cancer progression. • Biosensors are devices developed to detect the presence of OSCC biomarkers. • This review described and compared different categories of OSCC biosensors. [ABSTRACT FROM AUTHOR]

Aptamers are single-stranded oligonucleotides that can be artificially generated by a method called Systematic evolution of ligands by exponential enrichment (SELEX). The generated aptamers have been assessed for high-performance sensing applications due to their appealing characteristics. With either aptamers alone or complementing with antibodies, several high sensitive and portable sensors have been demonstrated for use in ‘point-of-care testing’. Due to their high suitability and flexibility, aptamers are conjugated with nanostructures and utilized in field applications. Moreover, aptamers are more amenable to chemical modifications, making them capable of utilization with most developed sensors. In this overview, we discuss novel, portable, and aptamer-based sensing strategies that are suitable for ‘point-of-care testing’. [ABSTRACT FROM AUTHOR]

Influenza viruses, which are RNA viruses belonging to the family Orthomyxoviridae, cause respiratory diseases in birds and mammals. With seasonal epidemics, influenza spreads all over the world, resulting in pandemics that cause millions of deaths. Emergence of various types and subtypes of influenza, such as H1N1 and H7N9, requires effective surveillance to prevent their spread and to develop appropriate anti-influenza vaccines. Diagnostic probes such as glycans, aptamers, and antibodies now allow discrimination among the influenza strains, including new subtypes. Several sensors have been developed based on these probes, efforts made to augment influenza detection. Herein, we review the currently available sensing strategies to detect influenza viruses. [ABSTRACT FROM AUTHOR]

Abstract: The ubiquitous nature of bacteria enables them to survive in a wide variety of environments. Hence, the rise of various pathogenic species that are harmful to human health raises the need for the development of accurate sensing systems. Sensing systems are necessary for diagnosis and epidemiological control of pathogenic organism, especially in the food-borne pathogen and sanitary water treatment facility׳s bacterial populations. Bacterial sensing for the purpose of diagnosis can function in three ways: bacterial morphological visualization, specific detection of bacterial component and whole cell detection. This paper provides an overview of the currently available bacterial detection systems that ranges from microscopic observation to state-of-the-art smartphone-based detection. [Copyright &y& Elsevier]

Abstract: Sensing applications can be used to report biomolecular interactions in order to elucidate the functions of molecules. The use of an analyte and a ligand is a common set-up in sensor development. For several decades, antibodies have been considered to be potential analytes or ligands for development of so-called “immunosensors.” In an immunosensor, formation of the complex between antibody and antigen transduces the signal, which is measurable in various ways (e.g., both labeled and label-free based detection). Success of an immunosensor depends on various factors, including surface functionalization, antibody orientation, density of the antibody on the sensor platform, and configuration of the immunosensor. Careful optimization of these factors can generate clear-cut results for any immunosensor. Herein, current aspects, involved in the generated immunosensors, are discussed. [Copyright &y& Elsevier]