Search

A natural stress response induces elevated cortisol levels in biological fluids, such as saliva. While current sensor technologies can detect cortisol in real time, their sensitivity and reliability for human subjects have not been assured. This is due to relatively low concentrations of salivary cortisol, which fluctuate throughout the day and vary significantly between individuals. To address these challenges, we present an improved electrochemical biosensor leveraging graphene's exceptional conductivity and physicochemical properties. A 1-pyrenebutyric acid N-hydroxysuccinimide ester (PBASE-NHS)-modified commercial graphene foam (GF) electrode is presented to realize an ultra-sensitive biosensor for cortisol detection directly in human saliva. The biosensor fabrication process entails the attachment of anti-cortisol monoclonal antibodies (mAb-cort) onto a PBASE-NHS/GF electrode through noncovalent immobilization on the vertically stratified graphene foam electrode surface. This unique immobilization strategy preserves graphene's structural integrity and electrical conductivity while facilitating antibody immobilization. The binding of cortisol to immobilized mAb-cort is read out via differential pulse voltammetry using ferri/ferro redox reactions. The immunosensor demonstrates an exceptional dynamic range of 1.0 fg mL -1 to 10,000 pg mL -1 (R 2  = 0.9914) with a detection limit of 0.24 fg mL -1 (n = 3) for cortisol. Furthermore, we have established the reliability of cortisol sensors in monitoring human saliva. We have also performed multiple modes of validation, one against the established enzyme-linked immunosorbent assay (ELISA) and a second by a third-party service Salimetric on 16 student volunteers exposed to different stress levels, showing excellent correlation (r = 0.9961). These findings suggest the potential for using mAb-cort/PBASE-NHS/GF-based cortisol electrodes for monitoring salivary cortisol in the general population., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Herein, we successfully developed a thread-based analytical device (μTAD) for simultaneous immunosensing of two biomolecules with attomolar sensitivity by using a photothermal effect. A photothermal effect exploits a strong light-to-heat energy conversion of plasmonic metallic nanoparticles at localized surface plasmon resonance. The key innovation is to utilize the cotton thread to realize this sensor and the use of chitosan modification for enhancing the microfluidic properties, for improving the efficiency of photothermal conversion, and for sensor stability. The developed μTAD sensor consists of (i) a sample zone, (ii) a conjugation zone coated with gold nanoparticles bound with an antibody (AuNPs-Ab 2 ), and (iii) a test zone immobilized with a capture antibody (anti-Ab 1 ). The prepared μTAD is assembled in a custom three-dimensional (3D) printed device which holds the laser for illumination and the thermometer for readout. The 3D-printed supportive device enhances signal response by focusing light and localizing the heat generated. For proof of concept, simultaneous sensing of two key stress and inflammation biomarkers, namely, cortisol and interleukin-6 (IL-6), are monitored using this technique. Under optimization, this device exhibited a detection linear range of 2.0-14.0 ag/mL (R 2 = 0.9988) and 30.0-360.0 fg/mL (R 2 = 0.9942) with a detection limit (LOD) of 1.40 ag/mL (∼3.86 amol/L) and 20.0 fg/mL (∼950.0 amol/L) for cortisol and IL-6, respectively. Furthermore, the analysis of both biomolecules in human samples indicated recoveries in the range of 98.8%-102.88% with the highest relative standard deviation being 3.49%, offering great accuracy and precision. These results are the highest reported sensitivity for these analytes using an immunoassay method. Our PT-μTAD strategy is therefore a promising approach for detecting biomolecules in resource-limited point-of-care settings.

In this work, pH sensing directly in biological media using three dimensional liquid gated graphene transistors is presented. The sensor is made of suspended network of graphene coated all around with thin layer of hafnium oxide (HfO2), showing high sensitivity and sensing beyond the Debye-screening limit. The performance of the pH sensor is validated by measuring the pH of isotonic buffered, Dulbecco's phosphate buffered saline (DPBS) solution, and of blood serum derived from Sprague-Dawley rat. The pH sensor shows high sensitivity of 71 ± 7 mV/pH even in high ionic strength media with molarities as high as 289 ± 1 mM. High sensitivity of this device is owing to suspension of three dimensional graphene in electrolyte which provides all around liquid gating of graphene, leading to higher electrostatic coupling efficiency of electrolyte to the channel and higher gating control of transistor channel by ions in the electrolyte. Coating graphene with hafnium oxide film (HfO2) provides binding sites for hydrogen ions, which results in higher sensitivity and sensing beyond the Debye-screening limit. The 3D graphene transistor offers the possibility of real-time pH measurement in biological media without the need for desaltation or sample preparation., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Recent research activities in the area of low-cost sensing and diagnostics that are realized on cellulosic paper substrate are presented. First a three-dimensional origami paper-based analytical device (omPAD) with multiple electrochemical sensors, an integrated sample reservoir and tight integration with a custom CMOS potentiostat is presented. Second, an optical sensor array with built-in microfluidic channel for sample delivery is presented. The sensors are fabricated using a combination of wax printing and screen-printing using a solution based approach in ambient conditions without the need for expensive fabrication equipment or a cleanroom. Readout is based on using existing consumer grade electronic devices like flatbed scanner (for optical sensor) or custom designed CMOS potentiostat (for electrochemical sensors). Together the 3D paper-based analytical device with integrated sensor, microfluidics and portable readout instrumentation demonstrates a low-cost, self-contained system suitable for sensing and point-of-care diagnostics.

Paper, a cheap and ubiquitous material, has great potential to be used as low-cost, portable and biodegradable platform for chemical and biological sensing application. In this paper, we are exploring a low-cost, flexible and reliable method to effectively pattern paper for capturing optical dyes and for flow-based delivery of target samples for colorimetric chemical sensing. In this paper, we target the detection of ammonia (NH3) and carbon dioxide (CO2), two of the important environmental and health biomarkers. By functionalizing the paper platform with diverse cross-reactive dyes sensitive to NH3 and CO2, their selective sensing within a certain pH range, as well as their detection at different concentrations can be achieved. The images of paper based device were captured by a flatbed scanner and processed in MATLAB(®) using a RGB model and PCA for quantitative analysis. Paper based devices with readout using ubiquitous consumer electronic devices (e.g. smartphones, flatbed scanner) are considered promising approaches for disease screening in developing countries with limited resources., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We present a microfluidic optoelectronic sensor for saliva diagnostics with a potential application for non-invasive early diagnosis of stomach cancer. Stomach cancer is the second most common cause of cancer-related deaths in the world. The primary identified cause is infection by a gram-negative bacterium Helicobacter pylori. These bacteria secrete the enzyme urease that converts urea into carbon dioxide (CO2) and ammonia (NH3), leading to their elevated levels in breath and body fluids. The proposed optoelectronic sensor will detect clinically relevant levels of CO2 and NH3 in saliva that can potentially be used for early diagnosis of stomach cancer. The sensor is composed of the embedded in a microfluidic device array of microwells filled with ion-exchange polymer microbeads doped with various organic dyes. The optical response of this unique highly diverse sensor is monitored over a broad spectrum, which provides a platform for cross-reactive sensitivity and allows detection of CO2 and NH3 in saliva at ppm levels., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We present a portable lab-on-chip device for high-throughput trapping and lysis of single cells with in-situ impedance monitoring in an all-electronic approach. The lab-on-chip device consists of microwell arrays between transparent conducting electrodes within a microfluidic channel to deliver and extract cells using alternating current (AC) dielectrophoresis. Cells are lysed with high efficiency using direct current (DC) electric fields between the electrodes. Results are presented for trapping and lysis of human red blood cells. Impedance spectroscopy is used to estimate the percentage of filled wells with cells and to monitor lysis. The results show impedance between electrodes decreases with increase in the percentage of filled wells with cells and drops to a minimum after lysis. Impedance monitoring provides a reasonably accurate measurement of cell trapping and lysis. Utilizing an all-electronic approach eliminates the need for bulky optical components and cameras for monitoring., (© 2013 Published by Elsevier B.V.)

The design and implementation of a portable fluorescence-based vapor sensing system are described. The system incorporates previously developed microsensor array technology into a compact, low-power device capable of collecting and delivering ambient vapor samples to the array while monitoring and recording the fluorescent responses of the sensors. The sensors respond differentially when exposed to a sample vapor and, when processed using a support vector machine (SVM) pattern recognition algorithm, are shown to discriminate between three classes of petroleum distillates. The system was characterized using sample vapors prepared under several different conditions in three sensing scenarios. The first scenario demonstrates the basic operational capability of the device in the field by presenting high concentration vapors to the array. The second scenario introduces the potential for a greater degree of variability in both sample vapor concentration and composition in an effort to emulate real-world sensing conditions. The third scenario uses an on-board trained pattern recognition algorithm to identify unknown vapors as their responses are collected. The device demonstrated high classification accuracy throughout the field tests and is capable of improving its classification accuracy when challenged with samples presented under variable ambient conditions by enhancing the signal-to-noise ratio of the array response.

In this paper, a prototype of a telemetry system for battery-less biological implant is implemented, which demonstrates both wireless power delivery and duplex wireless data communication. BPSK (Binary Phase Shift Keying) modulation is used for the data transmission from the external controller to the implant and LSK (Load Shift Keying) modulation is used for the reverse data transmission from the implant to the external controller. Power is being delivered wirelessly to the implant through the energy contained in the incoming BPSK data signal. This implant system contains a novel single chip realization of low power BPSK demodulator architecture, which provides considerable power savings compared to prior art. The demodulator occupies 0.1mm(2) area and consumes 5mW power from a 3.3V power supply. A sensitive board level LSK receiver for data transmitted from implant to the external reader has been proposed. External BPSK transmitter consists of a class-E power amplifier that serves the dual purpose of a data transmitter and wireless power delivery. In summary, a very low power bidirectional power and data telemetry system for biological implants based on BPSK and LSK signaling is proposed.