Search

In the last few decades, nanomaterials have made great advances in the biosensor field, thanks to their ability to enhance several key issues of biosensing analytical tools, namely, sensitivity, selectivity, robustness, and reproducibility. The recent trend of sustainability has boosted the progress of novel and eco-designed electrochemical paper-based devices to detect easily the target analyte(s) with high sensitivity in complex matrices. The huge attention given by the scientific community and industrial sectors to paper-based devices is ascribed to the numerous advantages of these cost-effective analytical tools, including the absence of external equipment for solution flow, thanks to the capillary force of paper, the fabrication of reagent-free devices, because of the loading of reagents on the paper, and the easy multistep analyses by using the origami approach. Besides these features, herein we highlight the multifarious aspects of the nanomaterials such as (i) the significant enlargement of the electroactive surface area as well as the area available for the desired chemical interactions, (ii) the capability of anchoring biorecognition elements on the electrode surface on the paper matrix, (iii) the improvement of the conductivity of the cellulose matrix, (iv) the functionality of photoelectrochemical properties within the cellulose matrix, and (v) the improvement of electrochemical capabilities of conductive inks commonly used for electrode printing on the paper support, for the development of a new generation of paper-based electrochemical biosensors applied in the biomedical field. The state of the art over the last ten years has been analyzed highlighting the various functionalities that arise from the integration of nanomaterials with paper-based electrochemical biosensors for the detection of biomarkers.

Pesticides are largely used at worldwide level to improve food production, fulfilling the needs of the global population which is increasing year by year. Although pesticides are beneficial for crop production, their extensive use has serious consequences for the pollution of the produced food as well as for soil and groundwaters. Indeed, it is reported that 50% of sprayed pesticides reach different destinations other than their target species, including soil, surface waters, and groundwaters. For this reason, we developed a flower-like origami paper-based device for pesticides detection in aerosol phase for precision agriculture. In detail, the paper-based electrochemical platform detects paraoxon, 2,4-dichlorophenoxyacetic acid, and glyphosate at ppb levels by measuring their inhibitory activity towards three different enzymes namely butyrylcholinesterase, alkaline phosphatase, and peroxidase enzyme, respectively. This integrated electrochemical device is composed of three office paper-based screen-printed electrodes and filter paper-based pads loaded with enzymes and enzymatic substrates. The pesticide detection is carried out by measuring through chronoamperometric technique the initial and residual enzymatic activity by using a smartphone-assisted potentiostat and evaluating the percentage of inhibition, proportional to the amount of aerosolized pesticides. This paper-based device was able to detect the three classes of pesticides in aerosol phase with limits of detection equal to 30 ppb, 10 ppb, and 2 ppb, respectively for 2,4-D, glyphosate, and paraoxon., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Coronavirus disease 2019 (COVID-19) has been recognized as a global pandemic outbreak, opening the most severe socio-economic crisis since World War II. Different scientific activities have been emerged in this global scenario, including the development of innovative analytical tools to measure nucleic acid, antibodies, and antigens in the nasopharyngeal swab, serum, and saliva for prompt identification of COVID-19 patients and to evaluate the immune response to the vaccine. The detection of SARS-CoV-2 in saliva remains a challenge for the lack of sufficient sensitivity. To address this issue, we developed a novel paper-based immunoassay using magnetic beads to support the immunological chain and 96-well wax-printed paper plate as a platform for color visualization by using a smartphone combined with Spotxel free-charge app. To assess the reliability of the measurement of SARS-CoV-2 in saliva, untreated saliva was used as a specimen and the calibration curve demonstrated a dynamic range up to 10 μg/mL, with a detection limit equal to 0.1 μg/mL. The effectiveness of this sustainable analytical tool in saliva was evaluated by comparing the data with the nasopharyngeal swab specimens sampled by the same patients and tested with Real-Time PCR reference method, founding 100% of agreement, even in the case of high Cycle Threshold (CT) numbers (low viral load). Furthermore, the positive saliva samples were characterized by the next-generation sequencing method, demonstrating the capability to detect the Delta variant, which is actually (July 2021) the most relevant variant of concern., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In the last 10 years, paper-based electrochemical biosensors have gathered attention from the scientific community for their unique advantages and sustainability vision. The use of papers in the design the electrochemical biosensors confers to these analytical tools several interesting features such as the management of the solution flow without external equipment, the fabrication of reagent-free devices exploiting the porosity of the paper to store the reagents, and the unprecedented capability to detect the target analyte in gas phase without any sampling system. Furthermore, cost-effective fabrication using printing technologies, including wax and screen-printing, combined with the use of this eco-friendly substrate and the possibility of reducing waste management after measuring by the incineration of the sensor, designate these type of sensors as eco-designed analytical tools. Additionally, the foldability feature of the paper has been recently exploited to design and fabricate 3D multifarious biosensors, which are able to detect different target analytes by using enzymes, antibodies, DNA, molecularly imprinted polymers, and cells as biocomponents. Interestingly, the 3D structure has recently boosted the self-powered paper-based biosensors, opening new frontiers in origami devices. This review aims to give an overview of the current state origami paper-based biosensors, pointing out how the foldability of the paper allows for the development of sensitive, selective, and easy-to-use smart and sustainable analytical devices.

Botulinum neurotoxins (BoNTs) produced by soil bacterium Clostridium botulinum are cause of botulism and listed as biohazard agents, thus rapid screening assays are needed for taking the correct countermeasures in a timely fashion. The gold standard method relies on the mouse lethality assay with a lengthy analysis time, i.e., 2-5 days, hindering the prompt management of food safety and medical diagnosis. Herein, we propose the first paper-based antibody-free sensor for reliable and rapid detection of BoNT/A and BoNT/C, exploiting their cleavage capability toward a synthetic peptide able to mimic the natural substrate SNAP-25. The peptide is labelled with the electroactive molecule methylene blue and immobilized on the paper-based electrode modified with gold nanoparticles. Because BoNT/A and BoNT/C can cleave the peptide with the removal of methylene blue from electrode surface, the presence of these neurotoxins in the sample leads to a signal decrease proportional to BoNT amount. The biosensor developed with the selected peptide and combined with smartphone assisted potentiostat is able to detect both BoNT/A and BoNT/C with a linearity up to 1 nM and a detection limit equal to 10 pM. The applicability of this biosensor was evaluated with spiked samples of orange juice, obtaining recovery values equal to 104 ± 6% and 98 ± 9% for 1 nM and 0.5 nM of BoNT/A, respectively., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Herein, we report a novel paper-based electrochemical sensor for on-site detection of sulphur mustards. This sensor was conceived combining office paper-based electrochemical sensor with choline oxidase enzyme to deliver a sustainable sensing tool. The mustard agent detection relies on the evaluation of inhibition degree of choline oxidase, which is reversibly inhibited by sulphur mustards, by measuring the enzymatic by-product H 2 O 2 in chronoamperometric mode. A nanocomposite constituted of Prussian Blue nanoparticles and Carbon Black was used as working electrode modifier to improve the electroanalytical performances. This bioassay was successfully applied for the measurement of a sulphur mustard, Yprite, obtaining a detection limit in the millimolar range (LOD = 0.9 mM). The developed sensor, combined with a portable and easy-to-use instrumentation, can be applied for a fast and cost-effective detection of sulphur mustards.

The growth of (bio)sensors in analytical chemistry is mainly attributable to the development of affordable, effective, portable, and user-friendly analytical tools. In the field of sensors, paper-based devices are gaining a relevant position for their outstanding features including foldability, ease of use, and instrument-free microfluidics. Herein, a multifarious use of filter paper to detect copper ions in bodily fluids is reported by exploiting this eco-friendly material to (i) synthesize AuNPs without the use of reductants and/or external stimuli, (ii) print the electrodes, (iii) load the reagents for the assay, (iv) filter the gross impurities, and (v) preconcentrate the target analyte. Copper ions were detected down to 3 ppb with a linearity up to 400 ppb in standard solutions. The applicability in biological matrices, namely, sweat and serum, was demonstrated by recovery studies and by analyzing these biofluids with the paper-based platform and the reference method (atomic absorption spectroscopy), demonstrating satisfactory accuracy of the novel eco-designed analytical tool.

The diffusion of novel SARS-CoV-2 coronavirus over the world generated COVID-19 pandemic event as reported by World Health Organization on March 2020. The huge issue is the high infectivity and the absence of vaccine and customised drugs allowing for hard management of this outbreak, thus a rapid and on site analysis is a need to contain the spread of COVID-19. Herein, we developed an electrochemical immunoassay for rapid and smart detection of SARS-CoV-2 coronavirus in saliva. The electrochemical assay was conceived for Spike (S) protein or Nucleocapsid (N) protein detection using magnetic beads as support of immunological chain and secondary antibody with alkaline phosphatase as immunological label. The enzymatic by-product 1-naphtol was detected using screen-printed electrodes modified with carbon black nanomaterial. The analytical features of the electrochemical immunoassay were evaluated using the standard solution of S and N protein in buffer solution and untreated saliva with a detection limit equal to 19 ng/mL and 8 ng/mL in untreated saliva, respectively for S and N protein. Its effectiveness was assessed using cultured virus in biosafety level 3 and in saliva clinical samples comparing the data using the nasopharyngeal swab specimens tested with Real-Time PCR. The agreement of the data, the low detection limit achieved, the rapid analysis (30 min), the miniaturization, and portability of the instrument combined with the easiness to use and no-invasive sampling, confer to this analytical tool high potentiality for market entry as the first highly sensitive electrochemical immunoassay for SARS-CoV-2 detection in untreated saliva., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The development of portable and user-friendly sensing platforms is a hot topic in the field of analytical chemistry. Among others, electroanalytical approaches exhibit a high amenability for reaching this purpose, i.e. the commercial strips for diabetes care are an obvious success. However, providing fully-integrated and reagent-free methods is always a leitmotiv. In this work, we evaluated the use of a disposable pipette tip, opportunely configured to demonstrate the first example of an electrochemical biosystem in a pipette tip, namely bio-lab-on-a-tip. The combination of a pipette tip, wire electrodes, enzyme, and cotton wool filter, allows the fabrication of a novel electroanalytical platform that does not need expertise-required tasks. To demonstrate the feasibility of this novel method, glucose is detected in beverages by means of chronoamperometry. The experimental setup, entirely built inside the pipette tip, is able to 1) block impurities/interferences from matrix, 2) load/release reagents for the bio-assay, 3) reduce the operating task to zero, and 4) perform electrochemical detection. With optimized experimental parameters, the bio-lab-on-a-tip is able to detect glucose linearly up to 10 mM with a detection limit of 170 μM. The effectiveness of the platform was confirmed by testing commercial beverages, e.g. Coca-Cola and Coca-Cola Zero, with high accuracy. In addition, the shelf-life of the novel device was evaluated, highlighting the role of cotton wool filter for providing a suitable environment for glucose oxidase stability. The novel concept can be easily generalized for further applications in the field of non-invasive clinical diagnostics and in-situ environmental monitoring., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In the overall scenario of precision medicine, we propose a novel paper-based lab-on-a-chip to deliver a cost-effective and easy to use sensing tool for customized administration of drugs in Alzheimer's disease. Among several drugs, we designed the device for evaluating the efficacy of compounds (e.g. physostigmine, rivastigmine, donepezil) which are able to inhibit in a reversible way the cholinesterase enzyme. Because cholinesterase activity is peculiar to each patient, the administration of customized amount of the drug can improve the treatment efficacy and the quality of patient life, avoiding side effects due to the overdosage. In detail, we exploited Vivid™ Plasma Separation membrane to threat the whole blood sample, filter paper to load the reagents needed for the measurement, and office paper to print electrodes able to measure the butyrylcholinesterase activity, delivering a reagent free analytical tool. The calibration curve of butyrylcholinesterase obtained in blood sample provided linearity between 2 and 12 U/mL, with sensitivity of 0.050 ± 0.004 μA mL/U. The physostigmine, rivastigmine, and donepezil inhibition activities toward the butyrylcholinesterase enzyme were also measured in blood sample with linearity up to respectively 0.5 μM, 25 μM, 30 μM, and detection limits of 0.009 μM, 0.4 μM, 0.3 μM. These results demonstrate the capability of paper-based origami sensors as point of care devices to customize the drug administration in Alzheimer's disease., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Pancreatic ductal adenocarcinoma is the predominant neoplastic disease of the pancreas and it represents the fourth most frequent cause of death in cancer-related disease, with only 8% of survivors after 5-year to the diagnosis. The main issues of this type of cancer rely on fast progress (i.e. 14 months from T1 to a T4 stage), nonspecific symptoms with delay in diagnosis, and the absence of effective screening strategies. To address the lack of early diagnosis, we report a cost-effective paper-based biosensor for the detection of miRNA-492, which is recognised as a biomarker for pancreatic ductal adenocarcinoma. To design a miniaturised, sensitive, and robust paper-based platform, an electrochemical sensor was screen-printed on office paper previously wax-patterned via wax-printing technique. The paper-based sensor was then engineered with a novel and highly specific peptide nucleic acid (PNA) as the recognition element. The formation of PNA/miRNA-492 adduct was evaluated by monitoring the interaction between the positively charged ruthenium (III) hexamine with uncharged PNA and/or negatively charged PNA/miRNA-492 duplex by differential pulse voltammetry. The paper-based biosensor provided a linear range up to 100 nM, with a LOD of 6 nM. Excellent selectivity towards one- and two-base mismatches (1MM, 2MM) or scrambled (SCR) sequences was highlighted and the applicability for biomedical analyses was demonstrated, measuring miRNA-492 in undiluted serum samples., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A novel amperometric algae-based biosensor was developed for the detection of photosynthetic herbicides in river water. The green photosynthetic algae Chlamydomonas reinhardtii was immobilized on carbon black modified screen-printed electrodes, exploiting carbon black as smart nanomaterial to monitor changes in algae oxygen evolution during the photosynthetic process. The decrease of oxygen evolution, occurring in the presence of herbicides, results in a decrease of current signals by means of amperometric measurements, in an analyte concentration dependent manner. Atrazine as case study herbicide was detected in a concentration range of 0.1 and 50 μM, with a linear range from 0.1 to 5 μM and a detection limit of 1 nM. No interference was observed in presence of 100 ppb arsenic, 20 ppb copper, 5 ppb cadmium, 10 ppb lead, 10 ppb bisphenol A, and 1 ppb paraoxon, tested as safety limits. A ~25% matrix effect and satisfactory recovery values of 107 ± 10% and 96 ± 8% were obtained in river water for 3 and 5 μM of atrazine, respectively. Stability studies were also performed obtaining a high working stability up to 10 h and repeatability with an RSD of 1.1% (n = 12), as well as a good storage stability up to 3 weeks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Advances in cutting-edge technologies including nanotechnology, microfluidics, electronic engineering, and material science have boosted a new era in the design of robust and sensitive biosensors. In recent years, carbon black has been re-discovered in the design of electrochemical (bio)sensors thanks to its interesting electroanalytical properties, absence of treatment requirement, cost-effectiveness (c.a. 1 €/Kg), and easiness in the preparation of stable dispersions. Herein, we present an overview of the literature on carbon black-based electrochemical (bio)sensors, highlighting current trends and possible challenges to this rapidly developing area, with a special focus on the fabrication of carbon black-based electrodes in the realisation of sensors and biosensors (e.g. enzymatic, immunosensors, and DNA-based)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Biosensor development exploiting various transduction principles is characterized by a strong competition to reach high detectability, portability and robustness. Nevertheless, a literature-based comparison is not possible, as different conditions are employed in each paper. Herein, we aim at evaluating which measurement, photons or electrons, yields better biosensor performance. Upon outlining an update in recent achievements to boost analytical performance, amperometry and chemiluminescence (CL)-based biosensors are directly compared employing the same biospecific reagents and analytical formats. Horseradish peroxidase (HRP) and hydrogen peroxide concentrations were directly measured, while glucose and mouse IgG were detected employing an enzyme paper-based biosensor and an immunosensor, respectively. Detectability was down to picomoles of hydrogen peroxide (4 pmol for CL and 210 pmol for amperometry) and zeptomoles of HRP (45 zmol for CL and 20 zmol for amperometry); IgG was detected down to 12 fM (CL) and 120 fM (amperometry), while glucose down to 17 μM (CL) and 40 μM (amperometry). Results showed that amperometric and CL biosensors offered similar detectability and analytical performance, with some peculiarities that suggest complementary application fields. As they generally provided slightly higher detectability and wider dynamic ranges, CL-based biosensors appear more suitable for point-of-care testing of clinical biomarkers, where detectability is crucial. Nevertheless, as high detectability in CL biosensors usually requires longer acquisition times, their rapidity will allocate electrochemical biosensors in real-time monitoring and wearable biosensors. The analytical challenge demonstrated that these biosensors have competitive and similar performance, and between photons and electrons the competition is still open., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The development of paper-based electroanalytical strips as powerful diagnostic tools has gained a lot of attention within the sensor community. In particular, the detection of nucleic acids in complex matrices represents a trending topic, especially when focused toward the development of emerging technologies, such as liquid biopsy. DNA-based biosensors have been largely applied in this direction, and currently, there are two main approaches based on target/probe hybridization reported in the literature, namely Signal ON and Signal OFF. In this technical note, the two approaches are evaluated in combination with paper-based electrodes, using a single strand DNA relative to H1047R (A3140G) missense mutation in exon 20 in breast cancer as the model target. A detailed comparison among the analytical performances, detection protocol, and cost associated with the two systems is provided, highlighting the advantages and drawbacks depending on the application. The present work is aimed to a wide audience, particularly for those in the field of point-of-care, and it is intended to provide the know-how to manage with the design and development stages, and to optimize the platform for the sensing of nucleic acids using a paper-based detection method.

Despite substantial advances in sensing technologies, the development, preparation, and use of self-testing devices is still confined to specialist laboratories and users. Decentralized analytical devices will enormously impact daily lives, enabling people to analyze diverse clinical, environmental, and food samples, evaluate them and make predictions to improve quality of life, particularly in remote, resource-scarce areas. In recent years, paper-based analytical tools have attracted a great deal of attention; the well-known properties of paper, such as abundance, affordability, lightness, and biodegradability, combined with features of printed electrochemical sensors, have enabled the development of sustainable devices that drive (bio)sensors beyond the state of the art. Their blindness toward colored/turbid matrices (i.e., blood, soil), their portability, and the capacity of paper to autonomously filter/purge/react with target species make such devices powerful in establishing point-of-need tools for use by non-specialists. This protocol describes the preparation of a voltammetric phosphate sensor and an amperometric nerve agent biosensor; both platforms produce quantitative measurements with currents in the range of microamperes. These printed strips comprise three electrodes (graphite for working and counter electrodes and silver/silver chloride (Ag/AgCl) for the reference electrode) and nanomodifiers (carbon black and Prussian blue) to improve their performance and specificity. Depending on analytical need, different types of paper (filter, office) and configurations (1D, 2D, 3D) can be adopted. The protocol, based on the use of cost-effective manufacturing techniques such as drop casting (to chemically modify the substrate surface) and wax/screen printing (for creating the channels and electrodes), can be completed in <1 h.

In this study we reported the development of a paper-based algal biosensor for the optical detection of nanoencapsulated-atrazine, a forefront nanoformulated herbicide with a high effective post-emergence herbicidal activity. In particular, the unicellular green photosynthetic algae Chlamydomonas reinhardtii was immobilised on a paper substrate soaked with an agar thin film and placed in a glass optical measurement cell, obtaining a totally environmental-friendly device. Nanoencapsulated-atrazine was detected by following the variable fluorescence (1-V J ) parameter, which decreased inversely proportional to the herbicide concentrations, in a range between 0.5 and 200 nM, indicating a linear relationship in the measured dose-response curves and a detection limit of 4 pM. Interference studies resulted in a very slight interference in presence of 2 ppm copper and 10 ppb arsenic at safety limits, as well as a slight matrix effect and a satisfactory recovery value of 96 ± 5% for 75 nM nanoencapsulated-atrazine in tap water. Stability studies were also performed obtaining a good storage stability up to 3 weeks. Results demonstrated the suitability of the proposed paper-based optical biosensor as a valid support in smart agriculture for on site, environmental friendly, cost effective and sensitive nanoencapsulated-atrazine analysis., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In the last decades, there is a growing search for analytical strategies to ensure clinical analysis without the need of laboratory set-up and skilled personnel. Indeed, user-friendly and low-cost devices are highly valued in the era of sustainability for their capability to be applied in low-resource contexts, such as developing countries. To address this issue, herein we report a 96-well paper-based and laboratory setup-free optical platform for the detection of butyrylcholinesterase enzyme (BChE) activity in human serum. We used chromatographic paper to realize a novel analytical tool exploiting its porous structure for reagentless synthesize Prussian Blue Nanoparticles (the sensing element), as well to load all the reagents required for the measurement. The principle of BChE activity detection relies on the reaction between the enzymatic product thiocholine and Prussian Blue, giving the Prussian White with subsequently Prussian Blue's fading, detected by a common office scanner supported by ImageJ software. Using this novel paper-based optical platform, BChE activity was linearly detected in the 2-15 U/mL range with a detection limit down to 0.8 U/mL. The accuracy was successfully demonstrated by recovery study with spiked serum and by comparing the data with the gold standard method., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The synthesis and employment of volatile toxic compounds as chemical weapons with a large-scale destructive power has introduced a new insidious threat over the last century. In this framework, the development of wearable sensing tools represents a critical point within the security field, in order to provide early alarm systems. Herein, a novel wearable electrochemical biosensor was developed for the rapid and on-site detection of mustard agents. Since a chemical attack is typically carried out by spraying these volatile agents into air, the sensor was designed in order to be able to measure mustard agents directly in the aerosol phase, further than in the liquid phase. The electrodes were screen-printed onto a filter paper support, which allowed to harness the porosity of paper to pre-load all the needed reagents into the cellulose network, and hence to realise an origami-like and reagent-free device. Mustard agent detection was carried out by monitoring their inhibitory effects toward the choline oxidase enzyme, through the amperometric measurement of the enzymatic by-product hydrogen peroxide. A carbon black/Prussian blue nanocomposite was used as a bulk-modifier of the conductive graphite ink constituting the working electrode, allowing for the electrocatalysis of the hydrogen peroxide reduction. After having verified the detecting capability toward a mustard agent simulant, the applicability of the resulting origami-like biosensor was demonstrated for the rapid and real-time detection of real sulfur mustard, obtaining limits of detection equal to 1 mM and 0.019 g·min/m 3 for liquid and aerosol phase, respectively., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Herein, we report an impedimetric DNA-based aptamer sensor for a single-step detection of B. anthracis spore simulant (B. cereus spore). Specifically, we designed a miniaturized label-free aptasensor for B. cereus spores based on a gold screen-printed electrode functionalized with B. cereus spores-binding aptamer (BAS-6R). Several parameters were optimized to fabricate the aptasensor such as the concentration of DNA aptamer solution (0.5 µM), the time (48 h), the temperature (4 °C), and the pH (7.5) for aptamer immobilization on the working electrode surface. Once the aptasensor was developed, it was tested against B. cereus spores 14579 evaluating the effect of incubation time and MgCl 2 concentration. Under the optimized conditions (incubation time equal to 3 h and absence of MgCl 2 ), B. cereus spores 14579 were detected with a linear range between 10 4 CFU/ml and 5 × 10 6 CFU/ml and a detection limit of 3 × 10 3 CFU/ml. Furthermore, the study of selectivity toward B. cereus 11778, B. subtilis, Legionella pneumophila, and Salmonella Typhimurium has demonstrated the capability of this sensor to detect B. cereus spores, proving the suitability of the DNA-based sensing element combined with a portable instrument for a label-free measurement on site of B. anthracis spore simulant., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Herein, we propose the first three-dimensional origami paper-based device for the detection of several classes of pesticides by combining different enzyme-inhibition biosensors. This device was developed by integrating two different office paper-based screen-printed electrodes and multiple filter paper-based pads to load enzymes and enzymatic substrates. The versatile analysis of different pesticides was carried by folding and unfolding the filter paper-based structure, without any addition of reagents and any sample treatment (i.e. dilution, filtration, pH adjustment). The paper-based platform was employed to detect paraoxon, 2,4-dichlorophenoxyacetic acid, and atrazine by exploiting the capability of these different types of pesticides (i.e. organophosphorus insecticides, phenoxy-acid herbicides, and triazine herbicide) to inhibit butyrylcholinesterase, alkaline phosphatase, and tyrosinase, respectively. The degree of inhibition correlating to the quantity of pesticides was evaluated by chronoamperometrically monitoring the enzymatic activity in the absence and in the presence of pesticides by using a portable potentiostat. To improve the sensitivity, the paper-based electrodes were modified with carbon black alone in the case of platforms for 2,4-dichlorophenoxyacetic acid and atrazine detection, or decorated with Prussian blue nanoparticles for the detection of paraoxon. The paper-based device was applied for the detection of paraoxon, 2,4-dichlorophenoxyacetic acid, and atrazine at ppb level in both standard solutions and river water sample. The accuracy of this origami multiple paper-based electrochemical biosensor was evaluated in river water by recovery studies, obtaining satisfactory values (e.g. for paraoxon 90 ± 1% and 88 ± 2%, for 10 and 20 ppb, respectively). The proposed three-dimensional origami paper device allows for rapid, cost-effective and accurate pesticide detection in surface water as a result of combining filter and office papers, screen-printing, wax-printing and nanomaterial technology., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Bioassays based on enzyme inhibition are analytical tools widely employed for inhibitor analysis. Beside the conventional analytical techniques such as chromatography and mass spectrometry, these bioassays are cost-effective, easy to use, and suitable for in situ measurement but they are often characterised by a quite narrow linear range. Herein, we report a novel graphical method based on integrated Michaelis-Menten equation, valid for all types of reversible inhibition, which provides an extended linear range. The suitability of this innovative approach was demonstrated in the case of fluoride quantification using a colorimetric bioassay based on acetylcholinesterase inhibition. The "half time reaction", estimated by the progress curve of cholinesterase inhibition, was plotted versus the fluoride inhibitor concentration, observing an extended linear range up to 5 mM, instead of 0.6 mM using initial rate measurements. The applicability of this new concept was further demonstrated in the case of catalase enzyme inhibited by cyanide. Furthermore, it was demonstrated that fixed substrate conversion at level of 10-50% allows determination of inhibitor concentration in a wide linear range with high precision and in short time of analysis. This novel theoretical and practical approach allows for the extension of the linear range without any further experiments, with several advantages including low reagent consumption, reduced waste generation and time of measurement., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Nowadays, environmentally friendly synthesis pathways for preserving the environment and minimizing waste are strongly required. Herein, we propose filter paper as a convenient scaffold for chemical reactions. To demonstrate this novel approach, Prussian Blue Nanoparticles (PBNPs) were synthesized on filter paper by utilizing few μL of its precursors without external inputs, i.e. pH, voltage, reducing agents, and without producing waste as well. The functional paper, named "Paper Blue", is successfully applied in the sensing field, exploiting the reduction of hydrogen peroxide at low applied potential. The eco-designed "Paper Blue" was combined with wax- and screen-printing to manufacture a reagentless electrochemical point-of-care device for diabetes self-monitoring, by using glucose oxidase as the biological recognition element. Blood glucose was linearly detected for a wide concentration range up to 25 mM (450 mg/dL), demonstrating its suitability for management of diabetes and glucose-related diseases. The Paper Blue-based biosensor demonstrated a correlation coefficient of 0.987 with commercial glucose strips (Bayer Contour XT). The achieved results demonstrated the effectiveness of this approach, which is also extendible to other (bio)systems to be applied in catalysis, remediation, and diagnostics., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The recent goal of sustainability in analytical chemistry has boosted the development of eco-designed analytical tools to deliver fast and cost-effective analysis with low economic and environmental impact. Due to the recent focus in sustainability, we report the use of low-cost filter paper as a sustainable material to print silver electrodes and to load reagents for a reagent-free electrochemical detection of chloride in biological samples, namely serum and sweat. The electrochemical detection of chloride ions was carried out by exploiting the reaction of the analyte (i.e. chloride) with the silver working electrode. During the oxidation wave in cyclic voltammetry the silver ions are produced, thus they react with chloride ions to form AgCl, while in the reduction wave, the following reaction occurs: AgCl + e - -->Ag + Cl - . These reactions at the electrode surface resulted in anodic/cathodic peaks directly proportional to the chloride ions in solution. Chloride ions were detected with the addition of only 10μL of the sample on the paper-based electrochemical cell, obtaining linearity up to 200mM with a detection limit equal to 1mM and relative standard deviation lower than 10%. The accuracy of the sensor was evaluated in serum and sweat samples, with percentage recoveries between 93 ± 10 and 108 ± 8%. Moreover, the results achieved with the paper-based device were positively compared with those obtained by using the gold standard method (Ion Selective Electrode) adopted in routine clinical analyses., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Paper-based microfluidic devices are gaining large popularity because of their uncontested advantages of simplicity, cost-effectiveness, limited necessity of laboratory infrastructure and skilled personnel. Moreover, these devices require only small volumes of reagents and samples, provide rapid analysis, and are portable and disposable. Their combination with electrochemical detection offers additional benefits of high sensitivity, selectivity, simplicity of instrumentation, portability, and low cost of the total system. Herein, we present the first example of an integrated paper-based screen-printed electrochemical biosensor device able to quantify nerve agents. The principle of this approach is based on dual electrochemical measurements, in parallel, of butyrylcholinesterase (BChE) enzyme activity towards butyrylthiocholine with and without exposure to contaminated samples. The sensitivity of this device is largely improved using a carbon black/Prussian Blue nanocomposite as a working electrode modifier. The proposed device allows an entirely reagent-free analysis. A strip of a nitrocellulose membrane, that contains the substrate, is integrated with a paper-based test area that holds a screen-printed electrode and BChE. Paraoxon, chosen as nerve agent simulant, is linearly detected down to 3µg/L. The use of extremely affordable manufacturing techniques provides a rapid, sensitive, reproducible, and inexpensive tool for in situ assessment of nerve agent contamination. This represents a powerful approach for use by non-specialists, that can be easily broadened to other (bio)systems., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Herein, we report the first example of a paper-based screen-printed biosensor for the detection of ethanol in beer samples. Common office paper was adopted to fabricate the analytical device. The properties of this paper-based screen-printed electrode (SPE) were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy, and they were compared with the well-established polyester-based SPEs as well. Paper demonstrated similar properties when compared with polyester, highlighting suitability towards its utilization in sensor development, with the advantages of low cost and simple disposal by incineration. A nanocomposite formed by Carbon Black (CB) and Prussian Blue nanoparticles (PBNPs), namely CB/PBNPs, was utilized as an electrocatalyst to detect the hydrogen peroxide generated by the enzymatic reaction between alcohol oxidase (AOx) and ethanol. After optimizing the analytical parameters, such as pH, enzyme, concentration, and working potential, the developed biosensor allowed a facile quantification of ethanol up to 10 mM (0.058 % vol ), with a sensitivity of 9.13 μA/mM cm 2 (1574 μA/% vol cm 2 ) and a detection limit equal to 0.52 mM (0.003% vol ). These satisfactory performances rendered the realized paper-based biosensor reliable over the analysis of ethanol contained in four different types of beers, including Pilsner, Weiss, Lager, and alcohol-free. The proposed manufacturing approach offers an affordable and sustainable tool for food quality control and for the realization of different electrochemical sensors and biosensors as well., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Herein, we report a portable electrochemical biosensor based on butyrylcholinesterase (BChE) immobilized on carbon black (CB)-modified screen-printed electrodes (SPEs) for the detection of organophosphorous pesticides in olive oil. The BChE/CB-SPE biosensor was developed to detect paraoxon in standard solutions as well as in olive oil samples previously treated with the QuEChERS method to extract pesticides from the whole fatty matrix. The biosensor shows a linear concentration range of between 20 and 100 ppb for paraoxon both in standard solutions (phosphate buffer 0.05 M) and in olive oil extracts, with a detection limit of 6 ppb in olive oil extract, corresponding to 10% of inhibition. The accuracy of this biosensor in olive oil samples was assessed with olive oil spiked with paraoxon, obtaining satisfactory recovery values., Competing Interests: The authors declare no conflicts of interest.

We report a screen-printed electrode (SPE) modified with a dispersion of carbon black (CB) and chitosan by drop casting. A cyclic voltammetry technique towards ferricyanide, caffeic acid, hydroquinone, and thiocholine was performed and an improvement of the electrochemical response with respect to bare SPE as well as SPE modified only with chitosan was observed. The possibility to detect thiocholine at a low applied potential with high sensitivity was exploited and an acetylcholinesterase (AChE) biosensor was developed. A dispersion of CB, chitosan, and AChE was used to fabricate this biosensor in one step by drop casting. The enzymatic activity of the immobilized AChE was determined measuring the enzymatic product thiocholine at +300 mV. Owing to the capability of organophosphorus pesticides to inhibit AChE, this biosensor was used to detect these pollutants, and paraoxon was taken as model compound. The enzyme inhibition was linearly related to the concentration of paraoxon up to 0.5 μg L(-1), and a low detection limit equal to 0.05 μg L(-1) (calculated as 10% of inhibition) was achieved. This biosensor was challenged for paraoxon detection in drinking waters with satisfactory recovery values. The use of AChE embedded in a dispersion of CB and chitosan allowed an easy and fast production of a sensitive biosensor suitable for paraoxon detection in drinking waters at legal limit levels. Graphical Abstract Biosensors based on screen-printed electrodes modified with Acetylcholinesterase, Carbon Black, and Chitosan for organophosphorus pesticide detection.

Enzyme inhibitors like drugs and pollutants are closely correlated to human and environmental health, thus their monitoring is of paramount importance in analytical chemistry. Enzymatic biosensors represent cost-effective, miniaturized and easy to use devices; particularly biosensors based on enzyme inhibition are useful analytical tools for fast screening and monitoring of inhibitors. The present review will highlight the research carried out in the last 9 years (2006-2014) on biosensors based on enzyme inhibition. We underpin the recent advances focused on the investigation in new theoretical approachs and in the evaluation of biosensor performances for reversible and irreversible inhibitors. The use of nanomaterials and microfluidic systems as well as the applications of the various biosensors in real samples is critically reviewed, demonstrating that such biosensors allow the development of useful devices for a fast and reliable alarm system., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A simple graphical method for the determination of reversible inhibition type, inhibition constant (Ki) and estimation of fifty percent of inhibition I₅₀ of an enzyme reaction is described. The method consists of plotting experimental data as "degree of inhibition" versus the inhibitor concentration at two or more concentrations of substrate. Diagnosis of inhibition type is based on determination of and the observation of the shift of the inhibition curves. Relationship between I50 and inhibition constant Ki was discussed. A simplified hyperbolae equation of degree of inhibition showing kinetic orders of 1 and zero at low and high concentrations of inhibitors respectively is proposed. The relative error of inhibitor concentration increased drastically when degree of inhibition reached values of 90%. Examples of published inhibition reports as well as an experimental example of amperometric biosensor based on tyrosinase inhibition by benzoic acid were in agreement with the proposed theoretical approach., (© 2013 Published by Elsevier B.V.)

This work investigates the behaviour of two alternative systems that model the crucial event involved in any ELISA test, i.e. the molecular recognition between an antigen and its specific antibody on a solid phase, and its measurement. Each approach is devised with the goal of making possible a single-step, separation and wash-free amperometric magneto-immunosensor. Magnetic particles (MBs) are used as support for the immobilization of rabbit IgGs that are recognized by the specific anti-rabbit IgG-HRP. The assay protocol is based on the use of a series of small "reservoirs" containing phosphate buffer, hydroquinone, anti-rabbit IgG-HRP and an appropriate amount of MB-rabbit IgG. After a brief incubation, the content of each "reservoir" is transferred to one of the wells of a 8-well magnetized-screen-printed electrode strip. The resulting MB-IgG-anti-IgG-HRP chain, is then concentrated on the working electrode surface for electrochemical measurement. Two different approaches to monitor this immunological reaction are investigated. The first one is based on the enzyme-channeling principle (ECP) and involves the use of a second enzyme, glucose oxidase (GOD), immobilized on the working electrode previously modified with Prussian Blue. Since the H(2)O(2) produced by GOD is the co-substrate of the HRP enzyme, glucose is added into the well and the current, generated by the residual H(2)O(2), is measured. The second, more direct, approach is performed without exploiting ECP (no GOD enzyme), by adding H(2)O(2) into the well and measuring the current generated by the HRP product on a pristine screen-printed electrode. Both approaches yielded a typical sigmoidal binding curve, illustrating the discrimination between the signal produced by the immuno-bound HRP concentrated on the electrode surface, and the background signal due to HRP in the bulk solution.

In this paper we propose the construction and application of a portable multi-purpose biosensor array for the simultaneous detection of a wide range of endocrine disruptor chemicals (EDCs), based on the recognition operated by various enzymes and microorganisms. The developed biosensor combines both electrochemical and optical transduction systems, in order to increase the number of chemical species which can be monitored. Considering to the maximum residue level (MRL) of contaminants established by the European Commission, the biosensor system was able to detect most of the chemicals analysed with very high sensitivity. In particular, atrazine and diuron were detected with a limit of detection of 0.5nM, with an RSD% less than 5%; paraoxon and chlorpyrifos were revealed with a detection of 5 μM and 4.5 μM, respectively, with an RSD% less than 6%; catechol and bisphenol A were identified with a limit of detection of 1 μM and 35 μM respectively, with an RSD% less than 5%., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The characterization of an economic and ease-to-use carbon paste acetylcholinesterase (AChE) based biosensor to determine the concentration of pesticides Paraoxon and Dichlorvos is discussed. AChE hydrolyses acetylthiocholine (ATCh) in thiocoline (TC) and acetic acid (AA). When AChE is immobilized into a paste carbon working electrode kept at +410 mV vs. Ag/AgCl electrode, the enzyme reaction rate using acetylthiocholine chloride (ATCl) as substrate is monitored as a current intensity. Because Paraoxon and Dichlorvos inhibit the AChE reaction, the decrease of the current intensity, at fixed ATCl concentration, is a measure of their concentration. Linear calibration curves for Paraoxon and Dichlorvos determination have been obtained. The detection limits resulted to be 0.86 ppb and 4.2 ppb for Paraoxon and Dichlorvos, respectively, while the extension of the linear range was up 23 ppb for the former pesticide and up to 33 ppb for the latter. Because the inhibited enzyme can be reactivated when immediately treated with an oxime, the biosensor reactivation has been studied when 1,1'-trimethylene bis 4-formylpyridinium bromide dioxime (TMB-4) and pyridine 2-aldoxime methiodide (2-PAM) were used. TMB-4 resulted more effective. The comparison with the behavior of similar AChE based biosensors is also presented., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A simple and reliable technique has been developed for the construction of an amperometric acetylcholinesterase biosensor based on screen-printed carbon electrodes. For the first time, one-step modification using single-walled carbon nanotubes and Co phtalocyanine has been proposed to decrease the working potential and to increase the signal of thiocholine oxidation. The biosensor developed made it possible to detect 5-50 ppb of paraoxon and 2-50 ppb of malaoxon with detection limits of 3 and 2 ppb, respectively (incubation 15 min). The biosensor showed high reproducibility when measurements of the substrate and inhibitor were performed (R.S.D. about 1% and 2.5%, respectively). The reliability of the inhibition measurements was confirmed by testing spiked samples of sparkling and tape waters., (Copyright © 2011 Elsevier B.V. All rights reserved.)

An efficient electrochemical protocol to monitor hydrogen peroxide consumption during metal-catalyzed oxidation by using screen-printed electrodes modified with Prussian blue is presented. In particular, cyclooctene oxidation to cyclooctene oxide, catalyzed by a vanadium(V)-salophen complex (H(2)salophen=N,N'-o-phenylenebis(salicylideneimine)), in molecular and ionic media was tested. Initially, a protocol for batch analysis was developed for a monophasic system in acetonitrile, and subsequently, an in situ protocol was developed for a biphasic system of 1-butyl-3-methylimidazolium hexafluorophosphate/phosphate buffer. Calibration curves were performed in amperometric mode by applying -50 mV versus an Ag pseudo-reference. The calibration curve of hydrogen peroxide showed a linear correlation from 1 × 10(-6) up to 5 × 10(-3) mol L(-1) with satisfactory inter- and intra-electrode reproducibility (relative standard deviation (RSD) values of 5 and 13%, respectively, for the monophasic system and 11 and 13%, respectively, for the biphasic system). Kinetic studies to investigate the oxidation reaction for both the mono- and biphasic systems have been carried out in amperometric mode as well. Firstly, the decomposition of hydrogen peroxide was examined, which showed that, in 1-butyl-3-methylimidazolium hexafluorophosphate(,) it completely decomposed in 300 min, whereas in acetonitrile, in the same time frame, 20% of the initial amount was still active. In the presence of 1% of the catalyst the decomposition rate increased in both solvents. Finally, the complete oxidation of cyclooctene was followed and the effective conversion was determined. The developed protocols showed high reproducibility, with the advantage that the environmentally friendly biphasic system could also be recycled. The good analytical performance obtained, coupled with a short analysis time, the possibility of in-line automation and the use of ionic liquids instead of molecular solvents, made this system a very attractive choice for monitoring oxidative reactions., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A reliable and cost-effective electrochemical method for the detection of deoxynivalenol (DON) in cereals and cereal-based food samples based on the use of a novel anti-DON Fab fragment is presented. The analytical system employed, Enzyme-Linked-Immunomagnetic-Electrochemical (ELIME) assay, is based on the use of immunomagnetic beads (IMBs) coupled with eight magnetized screen-printed electrodes (8-mScPEs) as electrochemical transducers. Using standard solutions of DON, a working range between 100 and 4500 ng/ml was obtained with an EC(50) of 380 ng/ml. The ELIME assay was employed to evaluate the cross-reactivity of the Fab fragment towards different trichothecenes revealing a good selectivity towards DON over other trichothecenes with the exception of 3-Ac-DON. The sensor was then applied to cereals and cereal-based food samples (wheat, breakfast cereal and baby-food) and a wide range of sample treatment procedures was tested. Within-laboratory precision (9-24% repeatability for breakfast cereals and 10-33% for baby-food) and recovery data (82-110% for breakfast cereals and 97-108% for baby-food) were calculated by analyzing blank breakfast cereals and baby-foods fortified with DON, demonstrating that the proposed method has the capability for use as a screening assay for DON in such products., (Copyright 2010 Elsevier B.V. All rights reserved.)

A thionine-modified carbon paste electrode for catechol and Bisphenol A (BPA) detection is presented. Graphite powder was modified by adsorbing thionine as electrochemical mediator. The electrochemical response of the modified carbon paste electrode (CPE) was determined before electrode modification with tyrosinase. Then, tyrosinase was added in order to assemble a biosensor. Once established the best operative conditions, an interelectrode reproducibility around 7% was obtained and the resulting biosensor showed improved sensitivities and (S=139.6+/-1.1 nA/microM for catechol and S=85.4+/-1.5 nA/microM for BPA) in comparison with the biosensor constructed without thionine (S=104.4+/-0.5 nA/microM for catechol and S=51.1+/-0.6 nA/microM for BPA) and low detection limits (0.15 microM for both the electrodes and analytes). Also the comparison with the results reported in the literature showed higher sensitivity and lower detection limit for our biosensor. Moreover the functioning of the thionine-tyrosinase CPE was validated following a biodegradation process of water polluted by BPA and comparing the time changes of BPA concentration inferred by the biosensor calibration curve and those determined by means of HPLC measurements., (2010 Elsevier B.V. All rights reserved.)

A novel biosensor assay format for aflatoxin based on acetylcholinesterase (AChE) inhibition by aflatoxin B(1) (AFB(1)) is proposed. The AChE was present in solution and an amperometric choline oxidase biosensor was used for monitoring its residual activity. To create the biosensor, the choline oxidase was immobilized by cross-linking onto screen-printed electrodes modified with Prussian Blue (PB) and these were used to detect the H(2)O(2) at low potential (-0.05V versus a screen-printed internal silver pseudoreference electrode). For the development of the AFB(1) assay, several parameters such as AChE and substrate concentration, the methanol effect, and pH were evaluated and optimized. The linear working range was assessed to be 10-60ppb. Concentrations as low as 2ppb, which correspond to the legal limit of AFB(1) in food for humans, were detected after a pre-concentration step. The suitability of the method was evaluated using commercial olive oil samples. A recovery equal to 78+/-9% for 10ppb of AFB(1) in olive oil samples was obtained.

A bienzyme electrochemical probe has been assembled and used to monitor the inhibition of the enzyme protein phosphatase-2A (PP2A) by okadaic acid (OA), taking advantage of the particular characteristics of a biochemical pathway in which PP2A is involved. This enzyme has significant activity toward glycogen phosphorylase a (PHOS a), which in turn catalyzes the conversion of glycogen to glucose-1-phosphate (G-1-P). In addition, PP2A is strongly inhibited by OA and its derivatives. Due to this combination of properties, PP2A was employed to develop an assay system involving a preliminary phase of off-line enzymatic incubations (OA/PP2A, PP2A/PHOS a, PHOS a/glycogen+phosphate). This off-line step was followed by the electrochemical detection of H2O2, which is the final product of two sequential enzymatic reactions: G-1-P with alkaline phosphatase (AP) producing glucose, then glucose with glucose oxidase (GOD) producing hydrogen peroxide. These two enzymes were coimmobilized on a nylon net membrane that was placed over an H2O2 platinum probe inserted into a flow injection analysis (FIA) system. During a first phase of the study, all analytical parameters were optimized. During a subsequent phase, the inhibition of PP2A enzyme by OA was evaluated. The calibration of the system shows a working range for detection of OA between 30 and 250 pg ml(-1). The total analysis time is the sum of 50 min for the off-line enzymatic incubations and 4 min for the biosensor response.

Trehalose is a disaccharide important in foods, serving as a glucose source in many and also as an additive in the food preparation. Because of its peculiar physico-chemical properties it plays an important role as preservative in drying and deep-freezing treatments. A new biosensor for trehalose determination has been realized by means of a flow system, based on a reactor in which the trehalase enzyme catalyses its hydrolysis into two alpha,d-glucose molecules, and a GOD (glucose oxidase) amperometric biosensor is employed for the glucose determination. The optimum operative conditions have been laid out and a particular attention has been paid to the immobilization procedure of the two enzymes. The electrode used is of the SPE (screen-printed electrode) type and has been activated with the Prussian Blue (PB) and then assembled using GOD immobilized with Nafion. The reactor has been prepared with the trehalase enzyme chemically immobilized on an Immunodyne ABC membrane. As demonstration of its utility, the biosensor has been tested on a real sample of Boletus edulis mushroom.

Different tyrosinase carbon paste modified electrodes to determine bisphenol A (BPA) concentration in aqueous solutions have been constructed. Variables examined were in the carbon paste composition and in particular: (i) the immobilized enzyme amount; (ii) the carbon type (powder, single or multi-walled nanotubes); (iii) the nature of the pasting oil (mineral oil, hexadecane and dodecane). For each biosensor type the amperometric response was evaluated with reference to the linear range and sensitivity. Constant reference has been made to the amperometric signals obtained, under the same experimental conditions, towards the catechol, a specific phenolic substrate for tyrosinase. The most efficient biosensors were those constructed by using the following composition for the carbon paste: 10% of tyrosinase, 45% of single wall carbon nanotubes (SWCN) and 45% of mineral oil. This biosensor formulation displayed the following electrochemical characteristics: a sensitivity equal to 138 microA/mM, LOD of 0.02 microM (based on three times the S/N ratio), linear range of 0.1-12 microM and response time of 6 min. This experimental work represents a first attempt at construction of a new carbon nanotube-tyrosinase based biosensor able to determine the concentration of BPA, one of the most ubiquitous and hazardous endocrine disruptors which can pollute the drinking and surface water, as well as many products of the food chain.

The nerve agents are chemical warfare agents known to be used during terrorist attacks. An inexpensive and portable system to be used by first responders and military personnel is of interest owing to the continuing threat of possible terrorist attacks. Amperometric biosensors based on cholinesterase inhibition show such potentialities. In this work butyrylcholinesterase was immobilized onto screen-printed electrodes modified with Prussian blue and the nerve agent detection was performed by measuring the residual activity of enzyme. The optimized biosensor was tested with sarin and VX standard solutions, showing detection limits of 12 and 14 ppb (10% of inhibition), respectively. The enzymatic inhibition was also obtained by exposing the biosensors to sarin in gas phase. Two different concentrations of sarin gas (0.1 and 0.5 mg m(-3)) at different incubation times (from 30 s up to 10 min) were tested. It is possible to detect sarin at a concentration of 0.1 mg m(-3) with 30-s incubation time, with a degree of inhibition of 34%, which match the legal limits (immediate danger to life and health).

Glucose biosensors based on the use of planar screen-printed electrodes modified with an electrochemical mediator and with glucose oxidase have been optimised for their application in the continuous glucose monitoring in diabetic patients. A full study of their operative stability and temperature dependence has been accomplished, thus giving useful information for in vivo applications. The effect of dissolved oxygen concentration in the working solution was also studied in order to evaluate its effect on the linearity of the sensors. Glucose monitoring performed with serum samples was performed to evaluate the effect of matrix components on operative stability and demonstrated an efficient behaviour for 72 h of continuous monitoring. Finally, these studies led to a sensor capable of detecting glucose at concentrations as low as 0.04 mM and with a good linearity up to 2.0 mM (at 37 degrees C) with an operative stability of ca. 72 h, thus demonstrating the possible application of these sensors for continuous glucose monitoring in conjunction with a microdialysis probe. Moreover, preliminary in vivo experiments for ca. 20 h have demonstrated the feasibility of this system.

Modified screen-printed electrodes for amperometric detection of H(2)O(2) and nicotinamide adenine dinucleotide (NADH) at low applied potential are presented in this paper. The sensors are obtained by modifying the working electrode surface with Prussian Blue, a well known electrochemical mediator for H(2)O(2) reduction. The coupling of this sensor with phenazine methosulfate (PMS) in the working solution gives the possibility of measuring both NAD(P)H and H(2)O(2). PMS reacts with NADH producing PMSH, which in the presence of oxygen, gives an equimolar amount of H(2)O(2). This allows the measurement of both analytes with similar sensitivity (357 mA mol(-1)L cm(-2) for H(2)O(2) and 336 mA mol(-1)L cm(-2) for NADH) and LOD (5x10(-7)mol L(-1) for H(2)O(2) and NADH) and opens the possibility of a whole series of biosensor applications. In this paper, results obtained with a variety of dehydrogenase enzymes (alcohol, malic, lactate, glucose, glycerol and glutamate) for the detection of enzymatic substrates or enzymatic activity are presented demonstrating the suitability of the proposed method for future biosensor applications.

Acetylcholinesterase (ChE) sensor based on Prussian blue (PB) modified electrode was developed and tested for the detection of organophosphorus and carbamic pesticides. The signal of the sensor was generated in PB mediated oxidation of thiocholine recorded at +200 mv in DC mode. ChE from electric eel was immobilized by cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) on the surface of screen-printed carbon electrode covered with PB and Nafion. The content of the surface layer (specific enzyme activity, Nafion and BSA amounts) was optimized to establish high and reliable response toward the substrate and ChE inhibitors. The ChE/PB sensor makes it possible to detect Aldicarb, Paraoxon and Parathion-Methyl with limits of detection 30, 10 and 5 ppb, respectively (incubation 10 min). The feasibility of practical application of the ChE/PB sensor developed for the monitoring of degradation of the pesticides in wine fermentation was shown. To diminish matrix interferences, the electrolysis of the grape juice with Al anode and evaporation of ethanol were suggested, however the procedures decrease the sensitivity of pesticide detection and stability of the sample tested.

A novel continuous lactate monitoring system has been developed modifying the GlucoDay portable medical device (A. Menarini Diagnostics), already present in the European market, and used to continuously measure glucose levels. Lactate oxidase based biosensors have been developed immobilising the enzyme on nylon net and placing it on a Pt electrode. The biosensor was connected to the portable device provided with a micro-pump and coupled to a microdialysis system. It is capable to record subcutaneous lactate every 3 min. In vitro analytical results confirmed that the sensors respond linearly in the interval of concentration between 0.1 and 10 mmol/L, covering the whole physiological range. During prolonged monitoring periods, the response of the biosensors remained stable, showing a limited drift of 8%, within 60 h. Stability tests are still on route. However, preliminary results have shown a shelf life of about 10 months. In vivo experiments performed on healthy rabbits have demonstrated the good accuracy and reproducibility of the system. A correlation coefficient equal to 0.9547 (N=80) was found, which represents a good correlation between the GlucoDay and the laboratory reference analyser. A 16 h in vivo monitoring on a healthy volunteer has been also performed.

Novel planar glucose biosensors to be used for continuous monitoring have been developed. The electrodes are produced with the "screen printing" technique, and present a high degree of reproducibility together with a low cost and the possibility of mass production. Prior to enzyme immobilisation, electrodes are chemically modified with ferric hexacyanoferrate (Prussian Blue). This allows the detection of the hydrogen peroxide produced by the enzymatic reaction catalysed by GOD, at low applied potential (ca. 0.0 V versus Ag/AgCl), highly limiting any electrochemical interferences. The layer of Prussian Blue (PB) showed a high stability at the working conditions (pH 7.4) and also after 1 year of storage dry at RT, no loss of activity was observed. The assembled glucose biosensors, showed high sensitivity towards glucose together with a long-term operational and storage stability. In a continuous flow system, with all the analytical parameters optimised, the glucose biosensors detected glucose concentration as low as 0.025 mM with a linear range up to 1.0mM. These probes were also tested over 50-60 h in a continuous flow mode to evaluate their operational stability. A 0.5 mM concentration of glucose was continuously fluxed into a biosensor wall-jet cell and the current due to the hydrogen peroxide reduction was continuously monitored. After 50-60 h, the drift of the signal observed was around 30%. Because of their high stability, these sensors suggest the possibility of using such biosensors, in conjunction with a microdialysis probe, for a continuous monitoring of glucose for clinical purposes.

The construction of an electrochemical immunosensor coupled to differential pulse voltammetry (DPV) for the detection of domoic acid (DA), a neurotoxic aminoacid responsible for the human syndrome known as "Amnesic Shellfish Poisoning" (ASP), is proposed here. The method involves the use of disposable screen-printed electrodes (SPEs) for the immunosensor development based on a "competitive indirect test". Domoic acid conjugated to bovine serum albumin (BSA-DA) was coated onto the working electrode of the SPE, followed by incubation with sample (or standard toxin) and anti-DA antibody. An anti-goat IgG-alkaline phosphatase (AP) conjugate was used for signal generation. A spectrophotometric enzyme-linked immunosorbent assay (ELISA) was used in a preliminary phase of development, prior to transferring the assay to the SPEs. Results showed a detection limit equal to 5 ng/ml of toxin. The electrochemical system is simple and cost-effective due to the disposable nature of the SPEs, and the analysis time is 150 min, shorter than that for the spectrophotometric method. The suitability of the assay for DA quantification in mussels was also evaluated. Samples were spiked with DA before and after the sample treatment to study the extraction efficiency and the matrix effect, respectively. After treatment, samples were analysed using a 1:250 v/v dilution in PBS-M (phosphate saline buffer pH 7.4 + CH3OH 10%) to minimise the matrix effect and allow for the detection of 20 microg/g of DA in mussel tissue. This represents the maximum acceptable limit defined by the Food and Drug Administration [Compliance Programme 7303.842. Guidance Levels, Table 3, p. 248, http://www.fda.org]. The optimised ELISA systems were then used, in parallel with a conventional HPLC method, to detect and confirm DA in shellfish extract in order to verify the performance of the electrochemical system. Very good recoveries were obtained, demonstrating the suitability of the proposed assay for accurate determination of the DA concentration in mussel samples.

Cholinesterase sensors based on screen-printed electrodes modified with polyaniline, 7,7',8,8'-tetracyanoquinodimethane (TCNQ), and Prussian blue have been developed and tested for detection of anticholinesterase pesticides in aqueous solution and in spiked grape juice. The influence of enzyme source and detection mode on biosensor performance was explored. It was shown that modification of the electrodes results in significant improvement of their analytical characteristics for pesticide determination. Thus, the slopes of the calibration curves obtained with modified electrodes were increased twofold and the detection limits of the pesticides were reduced by factors of 1.6 to 1.8 in comparison with the use of unmodified transducers. The biosensors developed make it possible to detect down to 2 x 10(-8) mol L(-1) chloropyrifos-methyl, 5 x 10(-8) mol L(-1) coumaphos, and 8 x 10(-9) mol L(-1) carbofuran in aqueous solution and grape juice. The optimal conditions for grape juice pretreatment were determined to diminish interference from the sample matrix.