Search

The therapeutic potential of elastin-like polypeptide (ELP) conjugated to therapeutic compounds is currently being investigated as an approach to target drugs to solid tumors. ELPs are hydrophobic polymers that are soluble at low temperatures and cooperatively aggregate above a transition temperature (TT), allowing for thermal targeting of covalently attached drugs. They have been shown to cooperatively transition from a disordered structure to a repeating type II β-turn structure, forming a β-spiral above the TT. Here we present biophysical measurements of the structural, thermodynamic, and hydrodynamic properties of a specific ELP being investigated for drug delivery, ELP[V5G3A2-150]. We examine the biophysical properties below and above the TT to understand and predict the therapeutic potential of ELP-drug conjugates. We observed that below the TT, ELP[V5G3A2-150] is soluble, with an extended conformation consisting of both random coil and heterogeneous β structures. Sedimentation velocity experiments indicate that ELP[V5G3A2-150] undergoes weak self-association with increasing temperature, and above the TT the hydrophobic effect drives aggregation entropically. These experiments also reveal a previously unreported temperature-dependent critical concentration (Cc) that resembles a solubility constant. Labeling ELP[V5G3A2-150] with fluorescein lowers the TT by 3.5°C at 20 μM, whereas ELP[V5G3A2-150] dissolution in physiological media (fetal bovine serum) increases the TT by ∼2.2°C.

Isothermal titration calorimetry (ITC) is a powerful technique that can be used to estimate a complete set of thermodynamic parameters (e.g., K(eq) (or ΔG), ΔH, ΔS, and n) for a ligand-binding interaction described by a thermodynamic model. Thermodynamic models are constructed by combining equilibrium constant, mass balance, and charge balance equations for the system under study. Commercial ITC instruments are supplied with software that includes a number of simple interaction models, for example, one binding site, two binding sites, sequential sites, and n-independent binding sites. More complex models, for example, three or more binding sites, one site with multiple binding mechanisms, linked equilibria, or equilibria involving macromolecular conformational selection through ligand binding, need to be developed on a case-by-case basis by the ITC user. In this paper we provide an algorithm (and a link to our MATLAB program) for the nonlinear regression analysis of a multiple-binding-site model with up to four overlapping binding equilibria. Error analysis demonstrates that fitting ITC data for multiple parameters (e.g., up to nine parameters in the three-binding-site model) yields thermodynamic parameters with acceptable accuracy.

We completed a biophysical characterization of the c-MYC proto-oncogene P1 promoter quadruplex and its interaction with a cationic porphyrin, 5,10,15,20-tetra(N-methyl-4-pyridyl)porphyrin (TMPyP4), using differential scanning calorimetry, isothermal titration calorimetry, and circular dichroism spectroscopy. We examined three different 24-mer oligonucleotides, including the wild-type (WT) sequence found in the c-MYC P1 promoter and two mutant G→T sequences that are known to fold into single 1:2:1 and 1:6:1 loop isomer quadruplexes. Biophysical experiments were performed on all three oligonucleotide sequences at two different ionic strengths (30 mM [K+] and 130 mM [K+]). Differential scanning calorimetry experiments demonstrated that the WT quadruplex consists of a mixture of at least two different folded conformers at both ionic strengths, whereas both mutant sequences exhibit a single two-state melting transition at both ionic strengths. Isothermal titration calorimetry experiments demonstrated that both mutant sequences bind 4 mols of TMPyP4 to 1 mol of DNA, in similarity to the WT sequence. The circular dichroism spectroscopy signatures for all three oligonucleotides at both ionic strengths are consistent with an intramolecular parallel stranded G-quadruplex structure, and no change in quadruplex structure is observed upon addition of saturating amounts of TMPyP4 (i.e., 4:1 TMPyP4/DNA).

Background The human telomere contains tandem repeat of (TTAGG) capable of forming a higher order DNA structure known as G-quadruplex. Porphyrin molecules such as TMPyP4 bind and stabilize G-quadruplex structure. Methods Isothermal titration calorimetry (ITC), circular dichroism (CD), and mass spectroscopy (ESI/MS), were used to investigate the interactions between TMPyP4 and the Co(III), Ni(II), Cu(II), and Zn(II) complexes of TMPyP4 (e.g. Co(III)-TMPyP4) and a model human telomere G-quadruplex (hTel22) at or near physiologic ionic strength ([Na+] or [K+] ≈ 0.15 M). Results The apo-TMPyP4, Ni(II)-TMPyP4, and Cu(II)-TMPyP4 all formed complexes having a saturation stoichiometry of 4:1, moles of ligand per mole of DNA. Binding of apo-TMPyP4, Ni(II)-TMPyP4, and Cu(II)-TMPyP4 is described by a “four-independent-sites model”. The two highest-affinity sites exhibit a K in the range of 108 to 1010 M− 1 with the two lower-affinity sites exhibiting a K in the range of 104 to 105 M− 1. Binding of Co(III)-TMPyP4, and Zn(II)-TMPyP4, is best described by a “two-independent-sites model” in which only the end-stacking binding mode is observed with a K in the range of 104 to 105 M− 1. Conclusions In the case of apo-TMPyP4, Ni(II)-TMPyP4, and Cu(II)-TMPyP4, the thermodynamic signatures for the two binding modes are consistent with an “end stacking” mechanism for the higher affinity binding mode and an “intercalation” mechanism for the lower affinity binding mode. In the case of Co(III)-TMPyP4 and Zn(II)-TMPyP4, both the lower affinity for the “end-stacking” mode and the loss of the intercalative mode for forming the 2:1 complexes with hTel22 are attributed to the preferred metal coordination geometry and the presence of axial ligands. General significance The preferred coordination geometry around the metal center strongly influences the energetics of the interactions between the metallated-TMPyP4 and the model human telomeric G-quadruplex. This article is part of a Special Issue entitled Microcalorimetry in the BioSciences — Principles and Applications, edited by Fadi Bou-Abdallah.

Elastin-like polypeptides (ELPs) are large, nonpolar polypeptides under investigation as components of a novel drug delivery system. ELPs are soluble at low temperatures, but they desolvate and aggregate above a transition temperature (TT). This aggregation is being utilized for targeting systemically delivered ELP-drug conjugates to heated tumors. We previously examined the structural, thermodynamic, and hydrodynamic properties of ELP[V5G3A2-150] to understand its behavior as a therapeutic agent. In this study, we investigate the effect that adding basic cell-penetrating peptides (CPPs) to ELP[V5G3A2-150] has on the polypeptide's solubility, structure, and aggregation properties. CPPs are known to enhance the uptake of ELP into cultured cells in vitro and into tumor tissue in vivo. Interestingly, the asymmetric addition of basic residues decreased the solubility of ELP[V5G3A2-150], although below the TT we still observed a low level of self-association that increased with temperature. The ΔH of the aggregation process correlates with solubility, suggesting that the basic CPPs stabilize the aggregated state. This is potentially beneficial as the decreased solubility will increase the fraction aggregated and enhance drug delivery efficacy at a heated tumor. Otherwise, the basic CPPs did not significantly alter the biophysical properties of ELP. All constructs were monomeric at low temperatures but self-associate with increasing temperature through an indefinite isodesmic association. This self-association was coupled to a structural transition to type II β-turns. All constructs reversibly aggregated in an endothermic reaction, consistent with a reaction driven by the release of water.

The formation of two different minor groove complexes between netropsin and A2T2 DNA has been attributed to specific binding and hydration effects. In this study, we have examined the effect of added osmolyte (e.g., TEG or betaine) on the binding of netropsin to a hairpin DNA, d(CGCGAATTCGCGTC-TCCGCGAATTCGCG)-3, having a single A2T2 binding site. Netropsin binding to this DNA construct is described by a two fractional site model with a saturation stoichiometry of 1:1. Free energy changes, ΔGi, for formation of both complex I and complex II decrease continuously as osmolyte is added (e.g., ΔG1 decreases by 1.3 kcal/mol and ΔG2 decreases by 0.8 kcal/mol in 4 m osmolyte vs buffer). The negative ΔCp values for formation of both complexes, I and II, are largely unaffected by the addition of osmolyte. Formation of complex I is accompanied by the acquisition of 31 water molecules vs 19 waters for complex II. The most significant difference between the two osmolytes is that betaine diminishes the fractional formation of the complex II species, virtually eliminating complex II at 2 m. Addition of osmolyte or a decrease in the temperature have approximately the same effect on DNA hydration and on the thermodynamics of netropsin binding.

H1.1 and H1.4 bind tightly to both short DNA oligomers and to CT-DNA (Ka≈1×10(7)). Binding is accompanied by an unfavorable enthalpy change (∆H≈+22 kcal/mol) and a favorable entropy change (-T∆S≈-30 kcal/mol). The Tm for the H1.4/CT-DNA complex is increased by 9 °C over the Tm for the free DNA. H1.4 titrations of the DNA oligomers yield stoichiometries (H1/DNA) of 0.64, 0.96, 1.29, and 2.04 for 24, 36, 48, and 72-bp DNA oligomers. The stoichiometries are consistent with a binding site size of 37±1 bp. CT-DNA titration data are consistent with binding site sizes of 32 bp for H1.1 and 36 bp for H1.4. The heat capacity changes, ΔCp, for formation of the H1.1 and H1.4/CT-DNA complexes are -160 cal mol(-1) K(-1) and -192 cal mol(-1)K(-1) respectively. The large negative ΔCp values indicate the loss of water from the protein DNA interface in the complex.

Histone H1 is a chromatin protein found in most eukaryotes. ITC and CD have been used to study the binding of H1(0) and its C-terminal, H1(0)-C, and globular, H1(0)-G, domains to a highly polymerized DNA. ITC results indicate that H1(0) and H1(0)-C bind tightly to DNA (Ka≈1×10(7)), with an unfavorable ΔH (ΔH≈+22kcal/mol) and a favorable ΔS (-TΔS≈-30kcal/mol). Binding H1(0)-G to DNA at 25°C is calorimetrically silent. A multiple independent site model fits the ITC data, with the anomaly in the data near saturation attributed to rearrangement of bound H1, maximizing the number of binding sites. CD experiments indicate that H1(0)/DNA and H1(0)-C/DNA complexes form with little change in protein structure but with some DNA restructuring. Salt dependent ITC experiments indicate that the electrostatic contribution to binding H1(0) or H1(0)-C is small ranging from 6% to 17% of the total ΔG.

Elastin-like Polypeptides (ELPs) are genetically engineered biopolymers that are derived from the endogenous protein Tropoelastin. ELPs are structurally disordered and soluble at low temperatures but transition to a β-spiral and aggregate at a Transition Temperature (TT). This aggregation is being explored as a novel drug delivery vector by thermally targeting systemically delivered ELP-drug conjugates. We are investigating the biophysical properties of ELP[V5G3A2-150] as a means of understanding and predicting the behavior in vivo. We have investigated the hydrodynamic, structural and thermodynamic properties of ELP[V5G3A2-150] through the use of CD, turbidity, DLS, DSC and SV. DLS and SV analyses suggest that ELP[V5G3A2-150] experiences small amounts of weak association below the TT that increase with temperature. CD analyses further indicate that below the TT ELP[V5G3A2-150] consists of both disordered (≈75%) and β-conformation (≈25%) and as the temperature and concentration is increased the % β-conformation increases. The temperature & concentration dependence of β-conformation suggests that the weak association can be attributed to heterogeneous β-sheets. SV revealed that above the TT ELP[V5G3A2-150] exhibits a temperature dependent critical concentration (CC). This CC is consistent with the TT and suggests that the TT may be described as a solubility constant.Assembly in serum raises the TT by ≈ 2.5°C. This is opposite to the expected effect of macromolecular crowding and suggests that certain serum proteins may be associating with ELP[V5G3A2-150]. Investigation of this effect through SV was greatly complicated by the presence of the Johnston-Ogston (J-O) effect. Further investigation suggested additional complexity in systems exhibiting the J-O effect than previously reported. Two of the additional complexities already determined are cross-term hydrodynamic non-ideality and high-concentration convection. Additional research into the effects of attaching CPPs to ELP[V5G3A2-150] will be presented. Work supported by NSF ARRA 0959211 grant.