Search

Background: Surgically induced nerve damage is a common but debilitating side effect. By developing tracers that specifically target the most abundant protein in peripheral myelin, namely myelin protein zero (P0), we intend to support fluorescence-guided nerve-sparing surgery. To that end, we aimed to develop a dimeric tracer that shows a superior affinity for P0. Methods: Following truncation of homotypic P0 protein-based peptide sequences and fluorescence labeling, the lead compound Cy5-P0101–125 was selected. Using a bifunctional fluorescent dye, the dimeric Cy5-(P0101–125)2 was created. Assessment of the performance of the mono- and bi-labeled compounds was based on (photo)physical evaluation. This was followed by in vitro assessment in P0 expressing Schwannoma cell cultures by means of fluorescence confocal imaging (specificity, location of binding) and flow cytometry (binding affinity; KD). Results: Dimerization resulted in a 1.5-fold increase in affinity compared to the mono-labeled counterpart (70.3 +/− 10.0 nM vs. 104.9 +/− 16.7 nM; p = 0.003) which resulted in a 4-fold increase in staining efficiency in P0 expressing Schwannoma cells. Presence of two targeting vectors also improves a pharmacokinetics of labeled compounds by lowering serum binding and optical stability by preventing dye stacking. Conclusions: Dimerization of the nerve-targeting peptide P0101–125 proves a valid strategy to improve P0 targeting.

Hierarchically built-up multicompartment nanoaggregate systems are of interest for, e.g., novel materials and medicine. Here we present a versatile strategy to generate and unambiguously characterize complex coacervate-core micelles by exploiting four different dendrimeric subcomponents as core-units. The resulting mesoscale structures have a hydrodynamic diameter of 50 nm and a core size of 33 nm, and host about thirty 6th generation polyamidoamine (PAMAM) dendrimers. We have used FRET (efficiency of similar to 0.2) between fluorescein and rhodamine moieties immobilized on separate PAMAM dendrimers (G6-F and G6-R, respectively) to prove synchronous encapsulation in the micelle core. Tuning the proximity of the FRET pair molecules either by varying the G6-F : G6-R ratio, or by co-assembling non-functionalized dendrimer (G6-E) in the core, reveals the optimal FRET efficiency to occur at a minimum of 70% loading with G6-F and G6-R. Additional co-encapsulation of 6th generation gold dendrimer-encapsulated nanoparticles (G6-Au) in the micelle core shows a dramatic reduction of the FRET efficiency, which can be restored by chemical etching of the gold nanoparticles from within the micellar core with thiols, leaving the micelle itself intact. This study reveals the controlled co-assembly of up to four different types of subcomponents in one single micellar core and concomitantly shows the wide variety of structures that can be made with a well-defined basic set of subcomponents. It is straightforward to design related strategies, to incorporate inside one micellar core, e.g., even more than 4 different dendrimers, or other classes of (macro)molecules, with different functional groups, other FRET pairs or different encapsulated metal nanoparticles.

The Lycurgus cup is worldwide admired in particular because of its fascinating dichroic property. The cup presents a green colour when the observer and the light source are on the same side (reflection), and a deep red colour when the observer and the light source are at opposite sides (transmission). This peculiar effect, which has perplexed scientists for centuries, was discovered to be due to the presence of nanoparticles in the glass. In particular, to two different metallic nanoparticles: silver nanoparticles (AgNP) and gold nanoparticles (AuNP). Here we show how dichroic silver nanoparticles and gold nanoparticles can be embedded in a 3D printable material in order to reproduce the same dichroic effect of the original Lycurgus cup.

Coacervate-core micelles are considered promising materials for several applications, from catalysis to drug delivery. However, oxidant-responsive coacervate-core micelles, able to undergo structural changes upon specific oxidation stimuli, are not well reported. Here, we present a novel ferrocene–dipicolinic acid derivative as redox-responsive subcomponent to be incorporated in cyclodextrin-based coacervate core micelles, C4Ms, with tuneable core structure and responsiveness towards H2O2 treatment. The Fc-C4Ms are formed combining three orthogonal supramolecular interactions, namely (i) metal-to-ligand coordination between europium(III) ions and dipicolinic acid molecules, (ii) host-guest interaction between beta cyclodextrins and ferrocenes and (iii) electrostatic coacervation interaction. The micelle stability against oxidation can be controlled by varying three main parameters: (a) the core-unit structure, from monomeric metal complexes to supramolecular oligomers, (b) the H2O2 equivalents and c) the ratio between redox-responsive and non-redox-responsive bislinker. The H2O2-responsive ferrocene-based systems might have an interesting application, e.g. reactive oxygen species-mediated drug delivery.

Metallic nanoparticles are small particles, with dimensions of less than 100 nm, which have unique characteristics. For example, the color of a nanoparticle solution is given by the surface plasmon resonance, in contrast to only absorbance of a molecule. Metallic nanoparticles have been used in the antiquity for the production of colored glass. Many of the medieval cathedral red windows are in fact, stained with gold nanoparticles. However, presenting just a red solution to a class and explaining that the solution contains gold nanoparticles can be disappointing as the red color can be obtained in many different ways without the need of nanoparticles. Something peculiar, like dichroism, can, on the other hand, shine the interest of an observer to the “nano-world”. Dichroic nanoparticles show different colors when illuminated from the front (scattering) or from the back (transmission). This effect is unique for nanoparticles and nanostructures in general and can generate the “WOW” effect in class or during public demonstrations. In this article we present a simple synthesis of dichroic silver and gold nanoparticles. Solutions of such nanoparticles are a stunning visual media for demonstrations, outreach and engaging audience in the “nano”world.

Plasma microcontact patterning (P mu CP) and replica molding were combined to make PDMS/glass microfluidic devices with beta-cyclodextrin (beta-CD) patterns attached covalently on the glass surface inside microchannels. The supramolecular reactivity, reusability and association constant of beta-CD with Cy5-Ad2 was tested by analyzing signal-to-noise ratios of patterns vs. spacing with fluorescence microscopy.

Polymer-based micellar assemblies are gaining increasing attention in the smart materials field, yet the design of micelles that show redox-responsive disassembly and, e. g., cargo release is still a challenge. To form redox-responsive micelles, we developed cyclodextrin-based coacervate core micelles that form under interplay of four orthogonal interactions: multivalent electrostatic coacervation, metal-to-ligand coordination chemistry, supramolecular host-guest interactions, and a reversible covalent disulfide metal-complex crosslinker. The cleavage of this crosslinker by dithiotreithol results in the breaking of oligomeric europium(III) structures in the core and results in the disassembly of the 70 nm size micelles. Over hours, due to the oxidation of thiolates to disulfides, monomeric units can re-crosslink into oligomeric core-units, favoring micellar reassembly. The time required to reassemble can be controlled by varying the reducing agent concentration or the ratio between redox-responsive and non-redox-responsive crosslinkers. Controlled Methyl Red encapsulation and release indicate the potential of these micelles, for, e. g., controlled drug uptake and delivery.

Species-specific isolation of microsized entities such as microplastics and resistant bacteria from waste streams is becoming a growing environmental challenge. By studying the on-flow immobilization of micron-sized polystyrene particles onto functionalized silica surfaces, we ascertain if supramolecular host guest chemistry in aqueous solutions can provide an alternative technology for water purification. Polystyrene particles were modified with different degrees of adamantane (guest) molecules, and silica surfaces were patterned with beta-cyclodextrin (beta-CD, host) through microcontact printing (mu CP). The latter was exposed to solutions of these particles flowing at different speeds, allowing us to study the effect of flow rate and multivalency on particle binding to the surface. The obtained binding profile was correlated with Comsol simulations. We also observed that particle binding is directly aligned with particle's ability to form host guest interactions with the beta-CD-patterned surface, as particle binding to the functionalized glass surface increased with higher adamantane load on the polystyrene particle surface. Because of the noncovalent character of these interactions, immobilization is reversible and modified beta-CD surfaces can be recycled, which provides a positive outlook for their incorporation in water purification systems.

[Image: see text] There is a need to develop diagnostic and analytical tools that allow noninvasive monitoring of bacterial growth and dissemination in vivo. For such cell-tracking studies to hold translational value to controlled human infections, in which volunteers are experimentally colonized, they should not require genetic modification, and they should allow tracking over a number of replication cycles. To gauge if an antimicrobial peptide tracer, (99m)Tc-UBI(29–41)-Cy5, which contains both a fluorescent and a radioactive moiety, could be used for such in vivo bacterial tracking, we performed longitudinal imaging of a thigh-muscle infection with (99m)Tc-UBI(29–41)-Cy5-labeled Staphylococcus aureus. Mice were imaged using SPECT and fluorescence-imaging modalities at various intervals during a 28 h period. Biodistribution analyses were performed to quantitate radioactivity in the abscess and other tissues. SPECT and fluorescence imaging in mice showed clear retention of the (99m)Tc-UBI(29–41)-Cy5-labeled bacteria following inoculation in the thigh muscle. Despite bacterial replication, the signal intensity in the abscess only modestly decreased within a 28 h period: 52% of the total injected radioactivity per gram of tissue (%ID/g) at 4 h postinfection (pi) versus 44%ID/g at 28 h pi (15% decrease). After inoculation, a portion of the bacteria disseminated from the abscess, and S. aureus cultures were obtained from radioactive urine samples. Bacterial staining with (99m)Tc-UBI(29–41)-Cy5 allowed noninvasive bacterial-cell tracking during a 28 h period. Given the versatility of the presented bacterial-tracking method, we believe that this concept could pave the way for precise imaging capabilities during controlled-human-infection studies.

Luminescent Ag nanoclusters (Ag-NC) provide the next generation in bionanoparticles, wherein the luminescence (650 nm) and large Stokes shift of these inorganic nanoclusters are favorable for biological imaging. By combining these characteristics with those of human serum albumin (HSA; a protein capable of binding multiple endo- and exogenous compounds), the Ag nanoclusters can be shielded from the environment and functionalized with (receptor) targeting moieties. Encapsulation of the 1.5 nm Ag nanoclusters by HSA resulted in a threefold increase in luminescence intensity and a twofold increase of the luminescence lifetime (1.7 vs. 3.6 µs). To exemplify the potential of this targeted concept, we functionalized HSA-Ag nanoparticles with chemokine receptor 4 (CXCR4) targeting peptides [Ac-TZ14011(CO2H)]. The resulting Ac-TZ14011-HSA-Ag nanoparticles demonstrated specific binding to CXCR4-overexpressing tumor cells. Upon exposure to (ambient) light, particle-functionalized tumor cells were killed. Combined, these experiments illustrate that HSA-Ag nanoparticles may have a potential in biological imaging and possibly even in targeted theranostic applications.

Background: Today, both radioactive SPECT and PET imaging radiopharmaceuticals are used for clinical diagnosis of bacterial infections. Due to the possible applications in image-guided surgery, fluorescent imaging of infections has gained interest. We here present the highlights and recent developments in the use of fluorescence imaging for bacterial infections. In this overview, we also include the latest developments in multimodal bacterial imaging strategies that combine radioactive and fluorescent imaging. Based on this literature, we present our future perspectives for the field including the translational potential. Methods: In the current review, we complement earlier reports with the most recent fluorescent and multimodal radiopharmaceuticals for bacterial infection imaging. Where possible, in this review, the chemical structure of the compounds and clinical images were shown. Results: A total of 35 out of 77 original articles on pre-clinical and clinical imaging of bacterial infections with fluorescent tracers and multimodality radiopharmaceuticals were included for reviewing. Conclusion: In our view, the highest translational potential lies with compounds that are based on targeting vectors that are specific for bacteria: e.g., fluorescently labelled UBI 29–41 , polymyxin B, vancomycin, ZnDPA and a M. tuberculosis-specific β-lactamase-cleavable linker CNIP800. Multimodal concepts using dually labelled UBI 29–41 , vancomycin, and ZnDPA help connect optical imaging to the more traditional use of radiopharmaceuticals in infectious diseases. Multimodal bacterial imaging is a promising strategy not only to diagnose bacterial infections but also to evaluate the effectivity of surgical treatment for infections.

Micropatterns of beta-cyclodextrin (beta-CD) monolayers on glass are obtained by using a plasma etching approach with polydimethylsiloxane (PDMS) stamps. This simple and versatile approach provides a promising alternative to current techniques for creating patterns of covalently bound molecules. It is also possible to fabricate sub-10 mu m sized features.

Background: Nanotechnology, even if unknowingly, has been used for millennia. The occurrence of shiny colors in pottery and glass made hundreds and thousand of years ago is due to the presence of nanoparticles in the fabrication of such ornaments. In the last decade, 3D printing has revolutionized fabrication and manufacturing processes, making it easier to produce, in a simple and fast way, 3D objects.Results: In this paper we show how to fabricate a 3D-printable nanocomposite composed of dichroic gold nanoparticles and a 3D-printable polymer. The minute amount of gold nanoparticles used for obtaining the dichroic effect does not influence the mechanical properties of the polymer nor its printability. Thus, the nanocomposite can be easily 3D-printed using a standard 3D printer and shows a purple color in transmission and a brownish color in reflection.Conclusion: This methodology can be used not only by artists, but also for studying the optical properties of nanoparticles or, for example, for the 3D fabrication of optical filters.

Introduction: The skin stage of malaria is a vital and vulnerable migratory life stage of the parasite. It has been characterised in rodent models, but remains wholly uninvestigated for human malaria parasites. To enable in depth analysis of not genetically modified (non-GMO) Plasmodium falciparum (Pf) sporozoite behaviour in human skin, we devised a labelling technology (Cy5M(2), targeting the sporozoite mitochondrion) that supports tracking of individual non-GMO sporozoites in human skin.Methods: Sporozoite labelling with Cy5M(2) was performed in vitro as well as via the feed of infected Anopheles mosquitos. Labelling was validated using confocal microscopy and flow cytometry and the fitness of labelled sporozoites was determined by analysis of infectivity to human hepatocytes in vitro, and in vivo in a rodent infection model. Using confocal video microscopy and custom software, single-sporozoite tracking studies in human skin-explants were performed.Results: Both in vitro and in mosquito labelling strategies yielded brightly fluorescent sporozoites of three different Plasmodium species. Cy5M(2) uptake colocalized with MitoTracker (R) green and could be blocked using the known Translocator protein (TSPO)-inhibitor PK11195. This method supported the visualization and subsequent quantitative analysis of the migration patterns of individual non-GMO Pf sporozoites in human skin and did not affect the fitness of sporozoites.Conclusions: The ability to label and image non-GMO Plasmodium sporozoites provides the basis for detailed studies on the human skin stage of malaria with potential for in vivo translation. As such, it is an important tool for development of vaccines based on attenuated sporozoites and their route of administration.

Micelles have been recognized as versatile platforms for different biomedical applications, from bioimaging to drug delivery. Complex coacervate core micelles present great advantages compared to traditional micelles, however controlling the number of charges per core-unit and the stability is still a challenge. We here present cyclodextrin-based complex coacervate core micelles where the charge per core-unit can be straightforwardly tuned by cyclodextrin host–guest interactions. By varying the ratio between two adamantane guest molecules, 1-adamantanecarboxylic acid and 1,3-adamantanediacetic acid, the charge of the monomeric core-units can be finely tuned from 6− to 9−. By adding an adamantane bislinker, monomeric core-units can be combined together in dimeric and polymeric structures, increasing the micelles’ stability. The orthogonal supramolecular host–guest and coordination-chemistry allows for well-controlled cyclodextrin-based complex coacervate core micelles that offer a versatile platform for designing future, e.g., responsive systems.

To investigate if the degree of functionalization of ferritin could be controlled using a supramolecular self-assembly process, two photophysical separable batches of ferritin were created by functionalizing ferritin capsids with either Cy3- or Cy5-dye (loading rate of about 50 %). After dis-assembly, Cy3-, Cy5- as well as non-functionalized ferritin subunits were mixed in variable ratios. Photophysical measurements revealed that the ratio in which the subunits were mixed was indeed indicative for the ratios in which the functionalized subunits were observed in the re-assembled capsids. During re-assembly, however, a slight preference for the inclusion of non-functionalized subunits was observed, indicating the reactivity decreased following functionalization. The iron biomineralization properties of ferritin were retained by the multi-functionalized capsids as Fe II diffused rapidly inside making it visible by transmission electron microscopy (TEM). These combined data indicate that it is possible to functionalize ferritin in an orthogonal manner using the supramolecular interaction between ferritin subunits.