Search

Objective: An effective ex vivo expansion system of primitive hematopoietic cells (HCs) is required for wider application of hematopoietic stem cell transplantation. In this study, we examined effects of culture density on mouse fetal liver cells (FLCs) used as an HC source for the expansion of primitive HCs in three-dimensional (3D) cocultures with two kinds of mouse stromal cell lines (OP9 or C3H10T1/2). Materials and methods: FLCs were seeded at different densities (1, 2, and 10 × 107 cells/cm3) into porous polymer scaffolds with or without stromal cell layers and HCs were expanded in the cultures for 2 weeks without exogenous cytokines. Results: Differential effects of culture density on HC expansion were observed between cocultures and solitary FLC controls. In stromal cell cocultures, high expansion of HCs was achieved when FLCs were seeded at low densities. In contrast, the expansion in the controls was enhanced with increasing culture densities. With respect to expansion of primitive HCs existing in the FLCs, cocultures with C3H10T1/2 cells were superior to those with OP9 cells with a 29.3-fold expansion for c-kit+ hematopoietic progenitor cells and 8.3-fold expansion for CD34+ hematopoietic stem cells. In the controls, HC expansion was lower than in any cocultures, demonstrating the advantages of coculturing for HC expansion. Conclusion: Stromal cell lines are useful in expanding primitive HCs derived from FLCs in 3D cocultures. Culture density is a pivotal factor for the effective expansion of primitive HCs and this effect differs by culture condition.

With the aim of establishing an effective method to expand hematopoietic stem/progenitor cells for application in hematopoietic stem cell transplantation, we performed ex vivo expansion of hematopoietic stem/progenitor cells derived from mouse fetal liver cells in three-dimensional cocultures with stromal cells. In these cocultures, stromal cells were first cultured within three-dimensional scaffolds to form stromal layers and then fetal liver cells containing hematopoietic cells were seeded on these scaffolds to expand the hematopoietic cells over the 2 weeks of coculture in a serum-containing medium without the addition of cytokines. Prior to coculture, stromal cell growth was suppressed by treatment with the DNA synthesis inhibitor mitomycin C, and its effect on hematopoietic stem/progenitor cell expansion was compared with that in control cocultures in which fetal liver cells were cocultured with three-dimensional freeze-thawed stromal cells. After coculture with mitomycin C-treated stromal cells, we achieved a several-fold expansion of the primitive hematopoietic cells (c-kit+hematopoietic progenitor cells >7.8-fold, and CD34+hematopoietic stem/progenitor cells >3.5-fold). Compared with control cocultures, expansion of hematopoietic stem/progenitor cells tended to be lower, although that of hematopoietic progenitor cells was comparable. Thus, our results suggest that three-dimensional freeze-thawed stromal cells have higher potential to expand hematopoietic stem/progenitor cells compared with mitomycin C-treated stromal cells.

During cell cultivation, excessively generated reactive oxygen species (ROS) affect cellular properties and functions. Although cell cultivation media contain several types of low-molecular-weight antioxidants, these small antioxidants are internalized into the mitochondria and they disrupt regulated redox balance. Here, we developed a novel biointerface that effectively eliminates ROS on a cell culture surface. Poly(ethylene glycol)-b-poly[4-(2,2,6,6-tetramethylpiperidine-1-oxyl)aminomethylstyrene] (PEG-b-PMNT) was synthesized and covalently coated on a carboxyl group-activated culture dish using sec-amino groups on a PMNT segment followed by immobilization of anti-CD34 antibodies. CD34-positive hematopoietic stem progenitor cells (HSPCs) were separated from mice fetal liver cells using our polymer-coated cell culture dish. The separated HSPCs possessed intact mitochondrial membrane potential compared with those in the conventional cell cultivation system. In addition, the expression level of CD34 was maintained for an extended period on our culture dish with the antioxidative biointerface. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2080-2085, 2016.

This study's primary goal was to develop an effective ex vivo expansion method for haematopoietic cells. 3D culture of mouse bone marrow cells was performed in porous scaffolds using a sheet or cube shape. Bone marrow cells were cultured on bone marrow-derived stromal layers formed within the scaffolds and the effect of scaffold shape on the expansion of haematopoietic cells was examined. In some experiments, stromal layers within cubic scaffolds were frozen and then used to culture bone marrow cells after thawing. Results show that after comparison, total cell density and expansion of haematopoietic cells were greater in cultures using the cubic scaffold, suggesting that it was superior to the sheet-like scaffold for expanding haematopoietic cells. When cryopreserved stroma was used, it effectively supported the expansion of haematopoietic cells, and a greater expansion of haematopoietic cells [(erythroid and haematopoietic progenitor cells (HPCs)] was achieved than in cultures with stromal cells that had not been cryopreserved. Expansion of cells using cryopreserved stroma had several other advantages such as a shorter culture period than the conventional method, a stable supply of stromal cells, and ease of handling and scaling up. As a result, this is an attractive method for ex vivo expansion of haematopoietic stem cells (HSCs) and HPCs for clinical use.

As a preliminary investigation to establish a cryopreservation method suited for bioartificial livers (BALs), three-dimensional (3-D) cryopreservation experiments with fibroblasts were performed, in which the cells were firstly seeded into a porous scaffold, and the scaffold containing the cells was then cryopreserved. After thawing, 65% of the initially applied cells were still attached to the scaffold, and this efficiency was significantly higher than that in the control experiments (39%), in which fibroblasts cryopreserved in a suspension were seeded into the scaffold. This higher efficiency was mainly caused by higher immobilization efficiency at the time of cell seeding (83%) than in the controls (54%). Collagen coating of the scaffold in the 3-D cryopreservation enhanced immobilization efficiency at the time of cell seeding, and 1-day precultures before the 3-D cryopreservation considerably improved cell growth after thawing. From these favorable results, this 3-D cryopreservation method may become useful for developing BALs.

For the purpose of applying fetal liver cells (FLCs) as a cell source to tissue-engineered bioartificial livers, three-dimensional (3-D) cultures of FLCs using a porous polymer scaffold, as well as monolayer cultures as a control, were simultaneously performed. To achieve efficient growth and differentiation, the FLCs were cultured in the growth medium for the first 3 weeks and then cultured in the differentiation medium for 3 more weeks. In these cultures, stimulating factors (oncostatin M (OSM), epidermal growth factor (EGF), hepatocyte growth factor (HGF), or dimethyl sulfoxide (DMSO)) were added to the media, and their effects were examined. When the growth medium containing OSM and EGF was used, EGF stimulated the growth of FLCs synergistically with OSM. For the differentiation of FLCs into mature hepatocytes, DMSO added to the differentiation medium remarkably enhanced albumin secretion in the 3-D and monolayer cultures, although HGF was effective only in the monolayer culture. Microscopic observation proved that FLCs exhibited hepatocyte-like morphology only in the media containing DMSO. In conclusion, successive supply of the growth medium containing EGF and OSM and the differentiation medium containing DMSO efficiently induced the growth of the 3-D cultured FLCs and their differentiation into mature hepatocytes.

In an attempt to develop a bioartificial liver using cultured hepatocytes, we investigated the short-term and long-term viability and metabolic functions of hepatocytes cultured in a new type of packed-bed type reactor using reticulated polyvinyl formal (PVF) resin as a supporting material. Perfusion culture experiments using this reactor, as well as monolayer cultures using conventional collagen-coated Petri dishes as control experiments, were performed. It was found that the highest density of immobilized hepatocytes attained with PVF resin was on the order of 10(7) cells/cm3 PVF and that hepatocytes cultured in this type of module for up to a week showed a sufficient level of liver-specific metabolic functions, such as ammonium metabolism, urea-N synthesis, and albumin secretion, to be comparable to those in the monolayer culture. It is concluded that the packed-bed reactor system utilizing PVF resin is a promising means to develop a bioartificial organ using hepatocytes.

Vascular endothelial growth factor (VEGF) is crucial for the development and regeneration of the liver. However, there have been no reports about VEGF secretion by cultured fetal liver cells (FLCs). In the present study, the effects of oncostatin M (OSM), which strongly stimulates the growth and albumin secretion of FLCs, on VEGF secretion and morphological changes of long-term cultured FLCs were investigated under three-dimensional (3-D) and monolayer conditions. The cultured FLCs proliferated well and showed stable secretion of VEGF for up to 1 month under both monolayer and 3-D culture conditions. The addition of OSM to cultured cells strongly enhanced VEGF secretion. Compared with 3-D cultures, VEGF secretion per cell was higher in monolayer cultures. After 1 month in culture, the FLCs in 3-D cultures formed large aggregates like liver tissue, and FLCs also formed colonies and duct-like structures after several months of culture even under monolayer conditions. In conclusion, OSM stimulated the secretion of VEGF by cultured FLCs, which seemed to contribute to the development of a liver-like structure.

A three-dimensional (3-D) culture experiment of porcine fetal liver cells (FLCs) was performed using a porous resin substrate, for the purpose of developing a bioartificial liver. A long-term 3-D culture and monolayer culture as the control were performed for more than 1 month. To promote cell growth and maturation, human oncostatin M (OSM), the human leukemia inhibitory factor (LIF), or cortisol was added to the cultures, and the effect of each agent on cell proliferation and liver-specific cellular functions was investigated. The cell numbers in both the monolayer and 3-D cultures increased gradually with time, irrespective of the supplementation of the stimulating agents. In the monolayer culture, the albumin secretion of FLCs decreased rapidly, and scarce activity was detected from 2 weeks onward under all culture conditions tested. In the 3-D cultures, neither human OSM nor human LIF had any definite effect on the albumin secretion of FLCs. However, in the cultures with cortisol, albumin secretion was maintained for a considerably long period. These findings suggest that a bioartificial liver can be developed by culturing porcine FLCs with cortisol as the stimulant.

Porous polyvinyl formal (PVF) resin and poly(lactide-caprolactone) [P(LA/CL)] sponges were examined as three-dimensional matrices for chondroinduction of cultured bone marrow mesenchymal stem cells (MSCs). Approximately 5 x 10(5) mouse MSCs were seeded in porous PVF resin or P(LA/CL) sponges and were cultured for up to 1 month in serum-free high-glucose Dulbecco's modified Eagle's medium containing 10 ng/mL transforming growth factor-beta3 and 100 nM dexamethasone for chondroinduction. After the 1-month culture period, the PVF resin and P(LA/CL) sponges contained approximately twice the amount of glycosaminoglycans compared with the control pellet. Safranin-O staining of PVF and P(LA/CL) after 1 month of culture revealed a cartilage-like extracellular matrix containing glycosaminoglycans and collagen. When implanted into nude mice, PVF and P(LA/CL) seeded with MSCs were found to be both biocompatible and chondroinductive. These highly porous scaffolds can maintain a large number of cells in a three-dimensional structure. Both are potentially promising for the chondroinduction of bone marrow MSCs for research and clinical applications.

Cell seeding is one of the key procedures in the construction of tissue-engineered organs. In our previous efforts to create a bioartificial liver, high-density cultures of hepatocytes (>1 x 10(7) cells/1 cm(3)-substrate) and long-term maintenance of metabolic function were achieved with a packed-bed reactor utilizing porous poly(vinyl formal) (PVF) resin as a scaffold. However, a low seeding efficiency of about 30% remains a major obstacle to the scaleup of the reactor. In the present study, a new cell seeding method, centrifugal cell immobilization (CCI), which is based on alternating centrifugation and resuspension, was used to achieve high-density seeding and improve the seeding efficiency. Using the CCI method, the maximum density of the immobilized hepatocytes reached 3.8 x 10(7) cells/1 cm(3)-PVF, and the seeding efficiency was improved to about 43% after a relatively short immobilization process (about 15 min). Moreover, further improvement of the seeding efficiency was obtained by serial immobilization procedures. Thus, we concluded that this method is useful and effective for seeding cells into 3-dimensional scaffolds.

High-density, large-scale culture of hepatocytes is a key requirement in the development of a bioartificial liver that can replace liver functions in patients with severe liver insufficiency. We have applied a porous polymer, polyvinyl formal (PVF) resin, as a cell-supporting material for hepatocyte culture. We evaluated the performance of the culture system using PVF resin under three different culture conditions: a shake culture on conventional dishes, perfusion culture with sheet-shaped PVF, and a packed-bed-type module. Among them, the packed-bed reactor using PVF resin enabled high-density culture of hepatocytes (2×107 cells/cm3-PVF). The hepatocytes immobilized in the PVF resin maintained satisfactory metabolic functions (ammonium metabolism and albumin secretion) comparable to those of the monolayer dish cultures. Furthermore, by maintaining dissolved oxygen concentration at a relatively high level (260–460μM), the metabolic functions of the hepatocytes were improved. It was concluded that the packed-bed reactor using PVF resin is a promising system for developing a bioartificial liver using hepatocytes.

A packed-bed reactor using reticulated polyvinyl formal (PVF) resin as a support material is a useful configuration to achieve high density culture of hepatocytes for use as a bioartificial liver. The authors investigated the effects of oxygen concentrations of the culture medium on the metabolic performance of hepatocytes cultured in the reactor. A packed-bed reactor loaded with 250 PVF resin cubes (2 x 2 x 2 mm) was used. Hepatocytes obtained from male Wistar rats were inoculated into the reactor. Culture medium was perfused from the reservoir into the reactor through an oxygenator using a roller pump. Concentration of the dissolved oxygen in the medium was controlled by changing the gas mixture ratio supplied to the oxygenator. Hepatocytes cultured in the packed-bed reactor (cell density: 8.6 x 10(6) cells/cm3 PVF) under conditions of high dissolved oxygen concentrations ranging from 260 to 460 micromol/L showed 30% higher ammonium metabolic activity and 85% higher albumin secretion activity compared with those from the monolayer culture in the earlier culture stage (up to 2 days). However, low oxygen concentrations in the medium (

To establish an ex vivo expansion method of haematopoietic progenitor cells (HPCs) and erythroid cells, three-dimensional (3D) cultures of mouse bone marrow cells were performed, employing a porous polyvinyl formal (PVF) resin as a scaffold. In these cultures, the effects of oxygen concentration and co-cultures with stromal cells on the expansion of HPCs and erythroid cells were investigated. When bone marrow cells were cultured under 3D conditions, HPCs and erythroid cells expanded without supplementation of exogenous cytokines, irrespective of the presence of stromal cells. On the contrary, slight expansion of HPCs or erythroid cells was observed in monolayer cultures as controls, indicating that the 3D cultures using the PVF scaffold were far better in expanding HPCs and erythroid cells than the monolayer cultures. Under hypoxic conditions, bone marrow stromal cells allowed for a 3D culture of erythroid cells and HPCs at higher cell densities compared to cultures without stromal cells, and the duration of the expansion of HPCs and erythroid cells after initiating the 3D co-cultures was prolonged. The number of these cells increased throughout the culture period up to 3 weeks under hypoxic conditions, although the number decreased after 2 weeks under normoxic conditions. In conclusion, the 3D co-culture method of haematopoietic cells with stromal cells under hypoxic conditions was confirmed to be effective in expanding HPCs and erythroid cells, and this method seemed to be useful for developing an ex vivo expansion method for haematopoietic cells. Copyright © 2010 John Wiley & Sons, Ltd.

A new type of bone marrow cell culture system was developed by using a highly porous substrate matrix, i.e., porous polyvinyl formal (PVF) resin. Murine bone marrow (BM) cells were cultured without the use of exogenous growth factors in a three-dimensional matrix support made of collagen coated porous PVF resin. To examine the optimal conditions for highest stromal cell density, short-term and long-term in vitro culture experiments using PVF were performed. In the short-term culture experiments, it was found that cubes of PVF (10 x 10 x 2 mm and 130 microm in pore size) coated with type I collagen with a seeding density of 2x10(7) BM cells offered the most appropriate culture conditions. In the long-term cultures, BM cells in PVF maintained their viability for up to 6 weeks. In another series of re-inoculation experiments, freshly isolated BM cells were inoculated onto the already developed stromal layer. In this study, a higher cell density of the stromal layer was obtained in the PVF culture compared with those in the control dish culture. Based upon the results of in vitro experiments, in vivo transplantation studies were also performed. Histologic examinations of the subcutaneously transplanted PVF with stroma revealed host derived hematopoiesis inside the PVF matrix. Moreover, survival of approximately 15% of the transplanted BM cells that were cultured in PVF were confirmed in X-ray irradiated recipients. From these results, it is suggested that PVF resin is a promising three-dimensional substrate for BM cell culture and that it can maintain hematopoietic stem cells or progenitor cells after transplantation.

To improve the culture conditions of hepatocytes for use as a bioartificial liver, the effects of shear flow on the co-culture system of hepatocytes/nonparenchymal cells (NPC) were investigated. A flow chamber with a collagen coated rectangular glass plate, where hepatocytes (5 x 10(4) cell/cm2) and NPC (2 x 10(5) cell/cm2) were seeded, was used to attain a shear stress of 4.7 dyne/cm2. Concentrations of ammonia and urea in the medium were measured daily during the 2 week experiment. The metabolic activity of hepatocytes in the homotypic culture were lower than those of the co-culture, especially when the cultivation time exceeded 1 week. In addition, the applied shear flow promoted activity of the co-culture system. An enhancement in the rates of ammonium removal and urea synthesis was obtained in the perfusion systems. Morphologic observation revealed that aggregates of hepatocytes formed abundantly in the perfusion system and hepatocytes developed a cuboid shape. This suggested that perfusion affected the function and morphology of hepatocytes in the co-culture system. Shear flow could induce cell-cell interactions and secretion of extracellular matrix through the activation of NPC.

To investigate the effects of culture conditions on the maintenance of metabolic functions of cultured hepatocytes, long-term hepatocyte culture lasting 20 days was performed under two different culture conditions, i.e. stationary cultures utilizing porous polymer (polyvinyl formal (PVF) resin) as a substratum and conventional monolayer dish cultures without PVF. Metabolic activities specific to hepatocytes were evaluated in terms of ammonia metabolism, urea synthesis, and albumin secretion. Concerning ammonia metabolic and urea synthetic activities, no significant differences in maintenance of these activities were found between the two culture conditions, and these activities rapidly decreased with the elapse of the culture period, especially during the early stage of the experiments. However, after day 10, these activities in the stationary cultures were maintained at a slightly more favorable level than in the monolayer cultures. On the other hand, compared with ammonia metabolism and urea synthesis, stable and well-maintained albumin secretion of hepatocytes (60% of the activity in day 1) was exhibited in the stationary culture experiments, despite that this particular activity under the monolayer culture condition gradually reduced to a very low level (5.7% of that on day 1) at the end of the culture. From the morphological observations, hepatocytes immobilized in the PVF resin revealed individual spherical shapes without forming multicellular aggregation, and it was suggested that this characteristic structure contributed to good albumin secretion of hepatocytes. In conclusion, the advantages of the hepatocyte culture technique utilizing PVF resin over the conventional dish culture in maintaining some representative metabolic function specific to hepatocytes were clarified.

A packed-bed reactor utilizing the porous polymer, polyvinyl formal (PVF) resin, as a supporting material was applied for the long-term culture of rat hepatocytes. Perfusion cultures using this reactor, as well as monolayer cultures, were performed for up to 1 week under 3 different media conditions. When serum-free or epidermal growth factor-containing medium was used, albumin secretion rates showed constant decreases in both the perfusion and the monolayer cultures, and approximately 10% of the activity exhibited on Day 1 was preserved at the end of the cultures. In contrast, the hepatocytes supplemented with serum-containing medium exhibited stable ability of albumin secretion throughout the culture period under the perfusion culture condition using PVF resin. From the microscopic observation, the immobilized hepatocytes in this medium revealed round shapes, and a cluster of cell aggregates was scarcely seen.

A spheroid array of fetal mouse liver cells, which comprise various immature cells, was constructed on a PEG-gel micropatterned surface and its hepatic activity and degree of differentiation induction were significantly upregulated by co-culture with nonparenchymal liver cells as feeder-cells.

To establish a practical and convenient method to expand hematopoietic cells (HCs), we applied chemically-fixed stromal cell layers formed within three-dimensional (3D) scaffolds to feeder of HC cultures. The HCs were expanded using two successive cultures. First, stromal cells were cultured within porous polymer scaffolds and formed tissue-engineered constructs (TECs); the scaffolds containing stromal cells, were fixed using aldehyde (formaldehyde or glutaraldehyde) or organic solvents (acetone, methanol or ethanol). Second, mouse fetal liver cells (FLCs), as a source of HCs, were cultured on the TECs for 2 weeks, and the effects of fixative solutions on expansion of primitive HCs (c-kit(+) and CD34(+) cells) were examined. In the cultures on aldehyde-fixed TECs, primitive HCs were expanded 2.5- to 5.1-fold in the cultures on TECs fixed with glutaraldehyde, whereas no expansions were detected in those fixed with formaldehyde. However, we achieved expansion of primitive HCs > fivefold in the cultures using TECs fixed with organic solvents. Among these solvents, the highest expansions—of roughly tenfold—were obtained using acetone fixation. Ethanol-fixed TECs also supported the expansion of the primitive HCs well (6.6- to 8.0-fold). In addition to these sufficient expansions, the procedure and storage of fixed TECs is fairly easy. Thus, HC expansion on chemically-fixed TECs may be a practical method for expanding primitive HCs.