Search

Introduction: Intradural spinal cord stimulation (SCS) may offer significant therapeutic benefits for those with intractable axial and extremity pain, visceral pain, spasticity, autonomic dysfunction and related disorders. A novel intradural electrical stimulation device, limited by the boundaries of the thecal sac, CSF and spinal cord was developed to test this hypothesis. In order to optimize device function, we have explored finite element modeling (FEM). Methods: COMSOL®Multiphysics Electrical Currents was used to solve for fields and currents over a geometric model of a spinal cord segment. Cathodic and anodic currents are applied to the center and tips of the T-cross component of the electrode array to shape the stimulation field and constrain charge-balanced cathodic pulses to the target area. Results: Currents from the electrode sites can move the effective stimulation zone horizontally across the cord by a linear step method, which can be diversified considerably to gain greater depth of penetration relative to standard epidural SCS. It is also possible to prevent spread of the target area with no off-target action potential. Conclusion: Finite element modeling of a T-shaped intradural spinal cord stimulator predicts significant gains in field depth and current shaping that are beyond the reach of epidural stimulators. Future studies with in vivo models will investigate how this approach should first be tested in humans.

Goal: Develop and characterize the functionality of a novel thin-film probe technology with a higher density of electrode contacts than are currently available with commercial deep brain stimulation (DBS) lead technology. Such technology has potential to enhance the spatial precision of DBS and enable a more robust approach to sensing local field potential activity in the context of adaptive DBS strategies. Methods: Thin-film planar arrays were microfabricated and then assembled on a cylindrical carrier to achieve a lead with 3-D conformation. Using an integrated and removable stylet, the arrays were chronically implanted in the subthalamic nucleus and globus pallidus in two parkinsonian nonhuman primates. Results: This study provides the first in vivo data from chronically implanted DBS arrays for translational nonhuman primate studies. Stimulation through the arrays induced a decrease in parkinsonian rigidity, and directing current around the lead showed an orientation dependence for eliciting motor capsule side effects. The array recordings also showed that oscillatory activity in the basal ganglia is heterogeneous at a smaller scale than detected by the current DBS lead technology. Conclusion: These 3-D DBS arrays provide an enabling tool for future studies that seek to monitor and modulate deep brain activity through chronically implanted leads. Significance: DBS lead technology with a higher density of electrode contacts has potential to enable sculpting DBS current flow and sensing biomarkers of disease and therapy.

Successfully and efficiently bridging peripheral nerve gaps without the use of autografts is a substantial clinical advance for peripheral nerve reconstructions. Novel templating methods for the fabrication of conductive hydrogel guidance channels for axonal regeneration are designed and developed. PEDOT is electrodeposited inside the lumen to create fully coated-PEDOT agarose conduits and partially coated-PEDOT agarose conduits.

The authors' goal is to develop a peripheral nerve electrode with long-term stability and fidelity for use in nerve/machine interfaces. Microelectromechanical systems use silicon probes that contain multichannel actuators, sensors, and electronics. The authors tested the null hypothesis that implantation of microelectromechanical systems probes does not have a detrimental effect on peripheral nerve function or regeneration.A rat hind-limb, peroneal nerve model was used in all experimental groups: intact nerve (control group, n=10); nerve division and repair (repair group, n=9); and nerve division, insertion of microelectromechanical systems probe, and repair (repair plus probe group, n=9). Nerve morphology, nerve to compound muscle action potential studies, walking tracks, and extensor digitorum longus muscle function tests were evaluated following an 80-day recovery.Repair and repair plus probe showed no differences in axon count, axon size, percentage nonneural area, compound muscle action potential amplitude, latency, muscle mass, muscle force, or walking track scores. Although there was some local fibrosis around each microelectromechanical systems probe, this did not lead to measurable detrimental effects in any anatomical or functional outcome measurements.The absence of a significant difference between the repair and the repair plus probe groups regarding histology, compound muscle action potential, walking tracks, and muscle force suggests that microelectromechanical systems electrodes are compatible with regenerating axons and show promise for establishing chemical and electrical interfaces with peripheral nerves.

With the emerging interest in local field potentials (LFPs) as input signals for brain-machine interfaces, there is a need for integrated circuits capable of amplifying spikes and LFPs. A two-stage complementary metal-oxide semiconductor (CMOS) amplifier-filter has been implemented with 0.18-μm CMOS for simultaneous, multimodal recording of extracellular unit spikes and LFPs. For the frequency tuning and the reduction of the 1/f noise, it employs a switched-capacitor technique. The filter bandwidth is reconfigurable by using a different sampling clock frequency. The prototype amplifier has gains of 19.1 dB and 37.5 dB for low-pass only filter and cascaded filter, respectively. With a 100-kHz sampling frequency, the equivalent input noise spectral density is 38.8 nV/√Hz while the total power consumption is 69 μW with a 1.6-V supply, including clock generation and biasing occupying an area of 44 × 148 μm(2).

Recently, a significant amount of effort has been dedicated to understanding factors that influence the functionality of bio-electronic sensors and to development of novel coating technologies for modifying biosensor surfaces. Due to its well-known biocompatibility, alginate hydrogel (HG) has been used as a coating material on neural electrodes for promoting intimate cellular integration, providing a scaffold for local drug delivery, and creating a mechanical buffer between hard electrodes and the soft tissues of the central nervous system. However, neural signal recordings using HG-coated electrodes in animal models are still poorly evaluated. Here, we investigated the effect of the proximity of source neurons around the electrode sites using HG coatings with various thicknesses deposited on microfabricated electrodes, implanted in auditory cortex of guinea pigs. We also evaluated the role of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) in improving the recording functionality of the HG-coated neural electrodes. A significant loss in recording functionality was observed with thicker HG coatings, as determined by the number of clearly detectable units (30% with 80 microm thick coatings) and average signal-to-noise ratios (3.91 with 80 microm thick coatings). However, deposition of the conducting polymer PEDOT on the electrode sites restored the lost functionality of the electrodes caused by the HG coatings (30 microm). These conducting polymer/HG coatings have the potential to improve long-term performance of the neural electrodes not only by improving the electrode biocompatibility but also by facilitating more efficient signal transmission.

Development of advanced chronic, high-fidelity neural interfaces is accelerating research into brain function[1] and more effective treatments for neurological conditions.[2–5] The primary functional requirements of these interfaces include recording and/or stimulating from a number of discretely sampled volumes of the brain at requisite spatial resolutions for specific time periods that may extend from hours to years.[6–9] This translates to a push towards smaller electrodes that are more biologically transparent and biocompatible[10–12] with a high density of electrode sites that remain functional for long period of time.[13–15] As electrode size goes to the microscale (higher spatial selectivity), the impedance of electrode site increases, and consequently, the quality of signal recordings decreases (lower sensitivity). Thus, there is a trade off between the size (spatial selectivity) and quality of signal recordings (sensitivity) in neural microelectrodes.[16–18] Studies have also shown that the response of brain tissue to implanted microelectrodes includes an acute injury and a chronic reactive tissue response. The chronic response is characterized by the presence of both activated microglia and reactive astrocytes, which eventually encapsulate the electrode to some degree.[10,12,19–21] Consequently, in addition to the initial high impedance of microelectrodes, these reactive tissue responses have been associated with a progressive increase in the impedance of the electrode/tissue interface.[10,12] Therefore, achieving a very low impedance electrode/tissue interface is important for maintaining and improving signal quality.

A series of animal experiments was conducted to characterize changes in the complex impedance of chronically implanted electrodes in neural tissue. Consistent trends in impedance changes were observed across all animals, characterized as a general increase in the measured impedance magnitude at 1 kHz. Impedance changes reach a peak approximately 7 days post-implant. Reactive responses around individual electrodes were described using immuno- and histo-chemistry and confocal microscopy. These observations were compared to measured impedance changes. Several features of impedance changes were able to differentiate between confined and extensive histological reactions. In general, impedance magnitude at 1 kHz was significantly increased in extensive reactions, starting about 4 days post-implant. Electrodes with extensive reactions also displayed impedance spectra with a characteristic change at high frequencies. This change was manifested in the formation of a semi-circular arc in the Nyquist space, suggestive of increased cellular density in close proximity to the electrode site. These results suggest that changes in impedance spectra are directly influenced by cellular distributions around implanted electrodes over time and that impedance measurements may provide an online assessment of cellular reactions to implanted devices.

Insertion trauma is a critical issue when assessing intracortical electrophysiological and neurochemical recordings. Previous reports document a wide variety of insertion techniques with speeds ranging from 10 microm/s to 10 m/s. We hypothesize that insertion speed has an effect on tissue trauma induced by implantation of a neural probe. In order to monitor the neural interface during and after probe insertion, we have developed a silicon-substrate array with hydrous iridium oxide microelectrodes for potentiometric recording of extracellular pH (pH(e)), a measure of brain homeostasis. Microelectrode sites were sensitive to pH in the super-Nernstian range (-85.9 mV/pH unit) and selective over other analytes including ascorbic acid, Na(+), K(+), Ca(2+), and Mg(2+). Following insertion, arrays recorded either triphasic or biphasic pH(e) responses, with a greater degree of prolonged acidosis for insertions at 50 microm/s than at 0.5 mm/s or 1.0 mm/s (p

Recent neuroprosthetic work has focused on the motor cortex as a source of voluntary control signals. However, the motor cortex can be damaged in upper motor neuron degenerative diseases such as primary lateral sclerosis and amyotrophic lateral sclerosis. The possibility exists that prefrontal areas may also be used in neuroprosthetic devices. Here, we report the use of the cingulate cortex in a neuroprosthetic model. Seven rats were able to significantly modulate spiking activity in the cingulate cortex in order to receive reward. Furthermore, experiments with single neurons provide evidence that the cingulate cortex neuronal modulation is highly flexible and thus useful for a neuroprosthetic device.

Current neuroprosthetic systems based on electrophysiological recording have an extended, yet finite working lifetime. Some posited lifetime-extension solutions involve improving device biocompatibility or suppressing host immune responses. Our objective was to test an alternative solution comprised of applying a voltage pulse to a microelectrode site, herein termed "rejuvenation." Previously, investigators have reported preliminary electrophysiological results by utilizing a similar voltage pulse. In this study we sought to further explore this phenomenon via two methods: 1) electrophysiology; 2) an equivalent circuit model applied to impedance spectroscopy data. The experiments were conducted via chronically implanted silicon-substrate iridium microelectrode arrays in the rat cortex. Rejuvenation voltages resulted in increased unit recording signal-to-noise ratios (10%/spl plusmn/2%), with a maximal increase of 195% from 3.74 to 11.02. Rejuvenation also reduced the electrode site impedances at 1 kHz (67%/spl plusmn/2%). Neither the impedance nor recording properties of the electrodes changed on neighboring microelectrode sites that were not rejuvenated. In the equivalent circuit model, we found a transient increase in conductivity, the majority of which corresponded to a decrease in the tissue resistance component (44%/spl plusmn/7%). These findings suggest that rejuvenation may be an intervention strategy to prolong the functional lifetime of chronically implanted microelectrodes.

Methods are presented to incorporate polymer-based bioactive matrices into micro-fabricated implantable microelectrode arrays. Using simple techniques, hydrogels infused with bioactive molecules are deposited within wells in the substrate of the device. This method allows local drug delivery without increasing the footprint of the device. In addition, each well can be loaded individually, allowing spatial and temporal control over diffusion gradients in the microenvironment of the implanted neural interface probe. In vivo testing verified the following: diffusion of the bioactive molecules, integration of the bioactive molecules with the intended neural target and concurrent extracellular recording using nearby electrodes. These results support the feasibility of using polymer gels to deliver bioactive molecules to the region close to microelectrode shanks. This technique for microdrug delivery may serve as a means to intervene with the initial phases of the neuroinflammatory tissue response to permanently implanted microelectrode arrays.

Reactive tissue encapsulation of chronically implanted microelectrode probes can preclude long-term recording of extracellular action potentials. We investigated an intervention strategy for functionally encapsulated microelectrode sites. This method, known as "rejuvenation," involved applying a +1.5 V dc bias to an iridium site for 4 s. Previous studies have demonstrated that rejuvenation resulted in higher signal-to-noise ratios (SNRs) by decreasing noise levels, and reduced 1-kHz site impedances by decreasing the tissue interface resistances. In this study, we have investigated: 1) the duration of a single-voltage bias session and 2) the efficacy of multiple sessions. These questions were addressed through electrophysiological recordings, cyclic voltammetry, and modeling the electrode-tissue interface via an equivalent circuit model fit to impedance spectroscopy data. In the six implants studied, we found SNRs improved for 1-7 days with a peak typically occurring within 24 h of the voltage bias. Root-mean square (RMS) noise of the extracellular recordings decreased for 1-2 days, which paralleled a similar decrease in the adsorbed tissue resistance (R/sub en/) from the model. Implants whose SNR effects lasted more than a day showed stabilized reductions in the extracellular tissue resistance (R/sub ex/) and cellular membrane area (A/sub m/). Subsequent stimulus sessions were found to drop neural tissue parameters consistently to levels observed immediately after surgery. In most cases, these changes did parallel an improvement in SNR. These findings suggest that rejuvenation may be a useful intervention strategy to prolong the lifetime of chronically implanted microelectrodes.

The ability to control a prosthetic device directly from the neocortex has been demonstrated in rats, monkeys and humans. Here we investigate whether neural control can be accomplished in situations where (1) subjects have not received prior motor training to control the device (naive user) and (2) the neural encoding of movement parameters in the cortex is unknown to the prosthetic device (naive controller). By adopting a decoding strategy that identifies and focuses on units whose firing rate properties are best suited for control, we show that naive subjects mutually adapt to learn control of a neural prosthetic system. Six untrained Long-Evans rats, implanted with silicon micro-electrodes in the motor cortex, learned cortical control of an auditory device without prior motor characterization of the recorded neural ensemble. Single- and multi-unit activities were decoded using a Kalman filter to represent an audio "cursor" (90 ms tone pips ranging from 250 Hz to 16 kHz) which subjects controlled to match a given target frequency. After each trial, a novel adaptive algorithm trained the decoding filter based on correlations of the firing patterns with expected cursor movement. Each behavioral session consisted of 100 trials and began with randomized decoding weights. Within 7 +/- 1.4 (mean +/- SD) sessions, all subjects were able to significantly score above chance (P0.05, randomization method) in a fixed target paradigm. Training lasted 24 sessions in which both the behavioral performance and signal to noise ratio of the peri-event histograms increased significantly (P0.01, ANOVA). Two rats continued training on a more complex task using a bilateral, two-target control paradigm. Both subjects were able to significantly discriminate the target tones (P0.05, Z-test), while one subject demonstrated control above chance (P0.05, Z-test) after 12 sessions and continued improvement with many sessions achieving over 90% correct targets. Dynamic analysis of binary trial responses indicated that early learning for this subject occurred during session 6. This study demonstrates that subjects can learn to generate neural control signals that are well suited for use with external devices without prior experience or training.

An important aspect of the development of cortical prostheses is the enhancement of suitable implantable microelectrode arrays for chronic neural recording. The objective of this study was to investigate the recording performance of silicon-substrate micromachined probes in terms of reliability and signal quality. These probes were found to consistently and reliably provide high-quality spike recordings over extended periods of time lasting up to 127 days. In a consecutive series of ten rodents involving 14 implanted probes, 13/14 (93%) of the devices remained functional throughout the assessment period. More than 90% of the probe sites consistently recorded spike activity with signal-to-noise ratios sufficient for amplitudes and waveform-based discrimination. Histological analysis of the tissue surrounding the probes generally indicated the development of a stable interface sufficient for sustained electrical contact. The results of this study demonstrate that these planar silicon probes are suitable for long-term recording in the cerebral cortex and provide an effective platform technology foundation for microscale intracortical neural interfaces for use in humans.

This study investigated the use of planar, silicon-substrate microelectrodes for chronic unit recording in the cerebral cortex. The 16-channel microelectrodes consisted of four penetrating shanks with four recording sites on each shank. The chronic electrode assembly included an integrated silicon ribbon cable and percutaneous connector. In a consecutive series of six rats, 5/6 (83%) of the implanted microelectrodes recorded neuronal spike activity for more than six weeks, with four of the implants (66%) remaining functional for more than 28 weeks. In each animal, more than 80% of the electrode sites recorded spike activity over sequential recording sessions during the postoperative time period. These results provide a performance baseline to support further electrode system development for intracortical neural implant systems for medical applications.

Previous studies have demonstrated a correlation between cochlear implant recipients' comfort levels (C level, upper limit of dynamic range of stimulation) and the contralateral electrical stapedius reflex (ESR) threshold, detected by acoustic impedance change. However, the utility of the approach is limited because many recipients have no detectable impedance change. The goals of this study were to investigate the utility of the stapedial electromyogram (EMG) for estimating onset and strength of the ESR. Ketamine-anesthetized guinea pigs were implanted with Nucleus electrode arrays and stimulated with biphasic current pulse trains (250 pps) via a Cochlear Corporation CI24M stimulator. Typical EMG recordings (obtained with bipolar microwire electrodes) contained easily detectable unit potentials up to 300 microV in amplitude. Growth response curves (obtained from threshold-crossing counts or rms of the EMG signal) were typically monotonic with dynamic ranges spanning 700 microA or 8 dB. Based on adaptation and temporal properties, the stimulus protocol (500 ms duration with 4-5 s interstimulus intervals) was adequate for producing independent responses. The data presented are consistent with ESR characteristics (acoustic impedance technique) of cochlear implant recipients and with EMG properties of acoustically stimulated guinea pigs. Use of the EMG for characterizing the ESR may eventually be applied to human cochlear implant recipients as a guide in setting the upper limit of the dynamic range.

The development and optimization of calcium alginate for potential use in endovascular occlusion was investigated by testing its in vitro and in vivo mechanical stability and biocompatibility. The compressive resistance, rheology, and polymer yield of reacted alginate, and the polymer viscosity of unreacted alginate, were assessed. Biocompatibility was tested by injecting calcium alginate into the kidney capsule of rats. The reactivity of alginates with various structures and levels of purity were compared visually and histologically. Results suggest that calcium alginate is a biocompatible and mechanically stable gel for endovascular applications. Purified alginates exhibited compressive strength of 22 kPa and above at 40% compression, with no significant loss in elasticity. Purified alginate strength was significantly higher than that of crude alginates (p < 0.08). Purified alginates also exhibited significantly lower tissue reaction than crude alginates (p < 0.05). Of the alginates tested, purified high guluronic acid alginates (PHG) exhibited optimal strength and polymer yield, increased biocompatibility, and decreased viscosity. Clinical embolization treatments may be improved with the development of stable and biocompatible polymers such as calcium alginate. Possible uses of improved endovascular polymers include treating arteriovenous malformations (AVMs), aneurysms, blood flow to tumors, and vascular hemorrhaging.

An optical-electrical neural `Optrode' is developed for quantitative optical spectroscopic assessment of cortical tissue damage around a neural implant. In contrast to other Optrodes which illuminate tissue for neural activation, this work uses bi-directional waveguides to obtain spectroscopic information from the tissue. An optical assessment has the potential for providing a real-time histological assessment, by quantifying changes in absorption and scattering properties associated with oxygenation and tissue density around the neural probe, in contrast to impedance spectroscopy which provides limited insight. Optrode performance is characterized in optical tissue phantoms and a proof-of-concept chronic rat model is developed. Optrodes were chronically implanted in rat cerebral cortex. The pilot study demonstrates feasibility for chronic optical assessment. Future Optrodes may lead to high throughput and real-time assessments for studying the dynamic nature of the foreign body response in neural tissue.

Objective. Cortical electrical stimulation (CES) has been used extensively in experimental neuroscience to modulate neuronal or behavioral activity, which has led this technique to be considered in neurorehabilitation. Because the cortex and the surrounding anatomy have irregular geometries as well as inhomogeneous and anisotropic electrical properties, the mechanism by which CES has therapeutic effects is poorly understood. Therapeutic effects of CES can be improved by optimizing the stimulation parameters based on the effects of various stimulation parameters on target brain regions. Approach. In this study we have compared the effects of CES pulse polarity, frequency, and amplitude on unit activity recorded from rat primary motor cortex with the effects on the corresponding local field potentials (LFP), and electrocorticograms (ECoG). CES was applied at the surface of the cortex and the unit activity and LFPs were recorded using a penetrating electrode array, which was implanted below the stimulation site. ECoGs were recorded from the vicinity of the stimulation site. Main results. Time–frequency analysis of LFPs following CES showed correlation of gamma frequencies with unit activity response in all layers. More importantly, high gamma power of ECoG signals only correlated with the unit activity in lower layers (V–VI) following CES. Time–frequency correlations, which were found between LFPs, ECoGs and unit activity, were frequency- and amplitude-dependent. Significance. The signature of the neural activity observed in LFP and ECoG signals provides a better understanding of the effects of stimulation on network activity, representative of large numbers of neurons responding to stimulation. These results demonstrate that the neurorehabilitation and neuroprosthetic applications of CES targeting layered cortex can be further improved by using field potential recordings as surrogates to unit activity aimed at optimizing stimulation efficacy. Likewise, the signatures of unit activity observed as changes in high gamma power in ECoGs suggest that future cortical stimulation studies could rely on less invasive feedback schemes that incorporate surface stimulation with ECoG reporting of stimulation efficacy.

The goal of fixation is to rapidly and uniformly preserve tissue in a life-like state. While placing tissue directly in fixative works well for small pieces of tissue, larger specimens like the intact brain pose a problem for immersion fixation because the fixative does not reach all regions of the tissue at the same rate (5,7). Often, changes in response to hypoxia begin before the tissue can be preserved (12). The advantage of directly perfusing fixative through the circulatory system is that the chemical can quickly reach every corner of the organism using the natural vascular network. In order to utilize the circulatory system most effectively, care must be taken to match physiological pressures (3). It is important to note that physiological pressures are dependent on the species used. Techniques for perfusion fixation vary depending on the tissue to be fixed and how the tissue will be processed following fixation. In this video, we describe a low-cost, rapid, controlled and uniform fixation procedure using 4% paraformaldehyde perfused via the vascular system: through the heart of the rat to obtain the best possible preservation of the brain for immunohistochemistry. The main advantage of this technique (vs. gravity-fed systems) is that the circulatory system is utilized most effectively.

Neural probe insertion methods have a direct impact on the longevity of the device in the brain. Initial tissue and vascular damage caused by the probe entering the brain triggers a chronic tissue response that is known to attenuate neural recordings and ultimately encapsulate the probes. Smaller devices have been found to evoke reduced inflammatory response. One way to record from undamaged neural networks may be to position the electrode sites away from the probe. To investigate this approach, we are developing probes with controllably movable electrode projections, which would move outside of the zone that is damaged by the insertion of the larger probe. The objective of this study was to test the capability of conjugated polymer bilayer actuators to actuate neural electrode projections from a probe shank into a transparent brain phantom. Parylene neural probe devices, having five electrode projections with actuating segments and with varying widths (50 - 250 μm) and lengths (200 - 1000 μm) were fabricated. The electroactive polymer polypyrrole (PPy) was used to bend or flatten the projections. The devices were inserted into the brain phantom using an electronic microdrive while simultaneously activating the actuators. Deflections were quantified based on video images. The electrode projections were successfully controlled to either remain flat or to actuate out-of-plane and into the brain phantom during insertion. The projection width had a significant effect on their ability to deflect within the phantom, with thinner probes deflecting but not the wider ones. Thus, small integrated conjugated polymer actuators may enable multiple neuro-experiments and applications not possible before.

Electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV) measure properties of the electrode-tissue interface without additional invasive procedures, and can be used to monitor electrode performance over the long term. EIS measures electrical impedance at multiple frequencies, and increases in impedance indicate increased glial scar formation around the device, while cyclic voltammetry measures the charge carrying capacity of the electrode, and indicates how charge is transferred at different voltage levels. As implanted electrodes age, EIS and CV data change, and electrode sites that previously recorded spiking neurons often exhibit significantly lower efficacy for neural recording. The application of a brief voltage pulse to implanted electrode arrays, known as rejuvenation, can bring back spiking activity on otherwise silent electrode sites for a period of time. Rejuvenation alters EIS and CV, and can be monitored by these complementary methods. Typically, EIS is measured daily as an indication of the tissue response at the electrode site. If spikes are absent in a channel that previously had spikes, then CV is used to determine the charge carrying capacity of the electrode site, and rejuvenation can be applied to improve the interface efficacy. CV and EIS are then repeated to check the changes at the electrode-tissue interface, and neural recordings are collected. The overall goal of rejuvenation is to extend the functional lifetime of implanted arrays.

Advanced fabrication techniques have now made it possible to produce microelectrode arrays for recording the electrical activity of a large number of neurons in the intact brain for both clinical and basic science applications. However, the long-term recording performance desired for these applications is hindered by a number of factors that lead to device failure or a poor signal-to-noise ratio (SNR). The goal of this study was to identify factors that can affect recording quality using theoretical analysis of intracortical microelectrode recordings of single-unit activity. Extracellular microelectrode recordings were simulated with a detailed multi-compartment cable model of a pyramidal neuron coupled to a finite element volume conductor head model containing an implanted recording microelectrode. Recording noise sources were also incorporated into the overall modeling infrastructure. The analyses of this study would be very difficult to perform experimentally; however, our model-based approach enabled a systematic investigation of the effects of a large number of variables on recording quality. Our results demonstrate that recording amplitude and noise are relatively independent of microelectrode size, but instead are primarily affected by the selected recording bandwidth, impedance of the electrode-tissue interface, and the density and firing rates of neurons surrounding the recording electrode. This study provides the theoretical groundwork that allows for the design of the microelectrode and recording electronics such that the SNR is maximized. Such advances could help enable the long-term functionality required for chronic neural recording applications.

While the development of microelectrode arrays has enabled access to disparate regions of a cortex for neurorehabilitation, neuroprosthetic and basic neuroscience research, accurate interpretation of the signals and manipulation of the cortical neurons depend upon the anatomical placement of the electrode arrays in a layered cortex. Toward this end, this report compares two in vivo methods for identifying the placement of electrodes in a linear array spaced 100 µm apart based on in situ laminar analysis of (1) ketamine-xylazine-induced field potential oscillations in a rat motor cortex and (2) an intracortical electrical stimulation-induced movement threshold. The first method is based on finding the polarity reversal in laminar oscillations which is reported to appear at the transition between layers IV and V in laminar 'high voltage spindles' of the rat cortical column. Analysis of histological images in our dataset indicates that polarity reversal is detected 150.1 ± 104.2 µm below the start of layer V. The second method compares the intracortical microstimulation currents that elicit a physical movement for anodic versus cathodic stimulation. It is based on the hypothesis that neural elements perpendicular to the electrode surface are preferentially excited by anodic stimulation while cathodic stimulation excites those with a direction component parallel to its surface. With this method, we expect to see a change in the stimulation currents that elicits a movement at the beginning of layer V when comparing anodic versus cathodic stimulation as the upper cortical layers contain neuronal structures that are primarily parallel to the cortical surface and lower layers contain structures that are primarily perpendicular. Using this method, there was a 78.7 ± 68 µm offset in the estimate of the depth of the start of layer V. The polarity reversal method estimates the beginning of layer V within ±90 µm with 95% confidence and the intracortical stimulation method estimates it within ±69.3 µm. We propose that these methods can be used to estimate the in situ location of laminar electrodes implanted in the rat motor cortex.

A new parylene-based microfabrication process is presented for neural recording and drug delivery applications. We introduce a large design space for electrode placement and structural flexibility with a six mask process. By using chemical mechanical polishing, electrode sites may be created top-side, back-side, or on the edge of the device having three exposed sides. Added surface area was achieved on the exposed edge through electroplating. Poly(3,4-ethylenedioxythiophene) (PEDOT) modified edge electrodes having an 85-μm(2) footprint resulted in an impedance of 200 kΩ at 1 kHz. Edge electrodes were able to successfully record single unit activity in acute animal studies. A finite element model of planar and edge electrodes relative to neuron position reveals that edge electrodes should be beneficial for increasing the volume of tissue being sampled in recording applications.

The collagenous dura mater requires a secure closure following implantation of neural prosthetic devices to avoid complications due to cerebrospinal fluid leakage and infections. Alginate was previously suggested for use as a dural sealant. The liquid application and controllable gelling conditions enable alginate to conform to the unique geometries of a neural prosthetic device and the surrounding dura mater to create a barrier with the external environment. In this study, we evaluated the use of alginate as a method to securely reclose a dural defect and seal around an untethered microscale neural probe in the rabbit model. After 3 days and 3 weeks, the sealing strength of alginate remained eight times greater than normal rabbit intracranial pressure and similar in both the presence and absence of a penetrating neural probe. For time points up to 3 months, there was no significant difference in dura mater fibrosis or thickness between alginate and controls. Application of alginate to a dural defect results in a watertight seal that remains intact while the dura mater reforms. These findings indicate that alginate is an effective tool for sealing around microscale neural probes and suggests broader application as a sealant for larger neural prosthetic devices.

Most implantable chronic neural probes have fixed electrode sites on the shank of the probe. Neural probe shapes and insertion methods have been shown to have considerable effects on the resulting chronic reactive tissue response that encapsulates probes. We are developing probes with controllable articulated electrode projections, which are expected to provoke less reactive tissue response due to the projections being minimally sized, as well as to permit a degree of independence from the probe shank allowing the recording sites to "float" within the brain. The objective of this study was to predict and analyze the force-generating capability of conducting polymer bilayer actuators under physiological settings. Custom parylene beams 21 μm thick, 1 cm long, and of varying widths (200 - 1000 μm) were coated with Cr/Au. Electroplated weights were fabricated at the ends of the beams to apply known forces. Polypyrrole was potentiostatically polymerized to varying thicknesses onto the Au at 0.5 V in a solution of 0.1 M pyrrole and 0.1 M dodecylbenzenesulfonate (DBS). Using cyclic voltammetry, the bilayer beams were cycled in artificial cerebrospinal fluid (aCSF) at 37 °C, as well as in aqueous NaDBS as a control. Digital images and video were analyzed to quantify the deflections. The images and the cyclic voltammograms showed that divalent cations in the aCSF interfered with polymer reduction. By integrating polypyrrole-based conducting polymer actuators, we present a type novel neural probe. We demonstrate that actuating PPy(DBS) under physiological settings is possible, and that the technique of microfabricating weights onto the actuators is a useful tool for studying actuation forces.

The collagenous dura mater isolates the brain from the external environment and requires a secure closure following invasive neurosurgery. This is typically accomplished by approximation of the dura mater via sutures and adhesives. In selected cases, however, large portions of dura mater require excision, necessitating a tissue replacement patch. The mild reaction conditions and long-term biocompatibility of alginate evince strong candidacy for these applications. This study investigates the potential of diffusion and internally gelled alginates for these applications. Specifically, we quantified the viscosity, gel rate, syneresis level, compressive strength, compressive modulus, complex modulus and loss angle in the context of dura mater repair. The ideal sealant would have a rapid cross-link speed, while the ideal dura mater replacement would have a low level of syneresis. Both applications require a compressive modulus of 20–100 kPa and a complex modulus of 1–24 kPa. The data collected in this study suggests that the use of 1.95 wt% 43 mPa s alginate with 200 mM CaCl2 is sufficient for approximating the dural membrane for closure alone or in conjunction with suture. Alternatively, the use of 1.95 wt% 43 mPa s alginate with 100 mM CaCO3 is sufficient for tissue replacement in large dural defects.

Closed-loop neural interface technology that combines neural ensemble decoding with simultaneous electrical microstimulation feedback is hypothesized to improve deep brain stimulation techniques, neuromotor prosthetic applications, and epilepsy treatment. Here we describe our iterative results in a rat model of a sensory and motor neurophysiological feedback control system. Three rats were chronically implanted with microelectrode arrays in both the motor and visual cortices. The rats were subsequently trained over a period of weeks to modulate their motor cortex ensemble unit activity upon delivery of intra-cortical microstimulation (ICMS) of the visual cortex in order to receive a food reward. Rats were given continuous feedback via visual cortex ICMS during the response periods that was representative of the motor cortex ensemble dynamics. Analysis revealed that the feedback provided the animals with indicators of the behavioral trials. At the hardware level, this preparation provides a tractable test model for improving the technology of closed-loop neural devices.

The purpose of this study is to optimize poly(3,4,- ethylenedioxythiophene) (PEDOT) polymerization into decellular nerve scaffolding for interfacing to peripheral nerves. Our ultimate aim is to permanently implant highly conductive peripheral nerve interfaces between amputee, stump, nerve fascicles and prosthetic electronics. Decellular nerve (DN) scaffolds are an FDA approved biomaterial (Axogen TM ) with the flexible tensile properties needed for successful permanent coaptation to peripheral nerves. Biocompatible, electroconductive, PEDOT facilitates electrical conduction through PEDOT coated acellular muscle. New electrochemical methods were used to polymerize various PEDOT concentrations into DN scaffolds without the need for a final dehydration step. DN scaffolds were then tested for electrical impedance and charge density. PEDOT coated DN scaffold materials were also implanted as 15-20mm peripheral nerve grafts. Measurement of in-situ nerve conduction immediately followed grafting. DN showed significant improvements in impedance for dehydrated and hydrated, DN, polymerized with moderate and low PEDOT concentrations when they were compared with DN alone (a≤ 0.05). These measurements were equivalent to those for DN with maximal PEDOT concentrations. In-situ, nerve conduction measurements demonstrated that DN alone is a poor electro-conductor while the addition of PEDOT allows DN scaffold grafts to compare favorably with the “gold standard”, autograft (Table 1). Surgical handling characteristics for conductive hydrated PEDOT DN scaffolds were rated 3 (pliable) while the dehydrated models were rated 1 (very stiff) when compared with autograft ratings of 4 (normal). Low concentrations of PEDOT on DN scaffolds provided significant increases in electro active properties which were comparable to the densest PEDOT coatings. DN pliability was closely maintained by continued hydration during PEDOT electrochemical polymerization without compromising electroconductivity.

Neural prosthetics capable of recording or stimulating neuronal activity may restore function for patients with motor and sensory deficits resulting from injury or degenerative disease. However, overcoming inconsistent recording quality and stability in chronic applications remains a significant challenge. A likely reason for this is the reactive tissue response to the devices following implantation into the brain, which is characterized by neuronal loss and glial encapsulation. We have developed a neural stem cell-seeded probe to facilitate integration of a synthetic prosthesis with the surrounding brain tissue. We fabricated parylene devices that include an open well seeded with neural stem cells encapsulated in an alginate hydrogel scaffold. Quantitative and qualitative data describing the distribution of neuronal, glial, and progenitor cells surrounding seeded and control devices is reported over four time points spanning three months. Neuronal loss and glial encapsulation associated with cell-seeded probes were mitigated during the initial week of implantation and exacerbated by six weeks post-insertion compared to control conditions. We hypothesize that graft cells secrete neuroprotective and neurotrophic factors that effect the desired healing response early in the study, with subsequent cell death and scaffold degradation accounting for a reversal of these results later. Applications of this biohybrid technology include future long-term neural recording and sensing studies.

We hypothesized that re-entry into the cell cycle may be associated with reactive gliosis surrounding neural prostheses, and that administration of a cell cycle inhibitor (flavopiridol) at the time of surgery would reduce this effect. We investigated the effects of flavopiridol on recording quality and impedance over a 28-day time period and conducted histology at 3 and 28 days post-implantation. Flavopiridol reduced the expression of a cell cycle protein (cyclin D1) in microglia surrounding probes at the 3-day time point. Impedance at 1 kHz was decreased by drug administration across the study period compared to vehicle controls. Correlations between recording (SNR, units) and impedance metrics revealed a small, but statistically significant, inverse relationship between these variables. However, the relationship between impedance and recording quality was not sufficiently strong for flavopiridol to result in an improvement in SNR or the number of units detected. Our data indicate that flavopiridol is an effective, easily administered treatment for reducing impedance in vivo, potentially through inhibiting microglial encapsulation of implanted devices. This strategy may be useful in stimulation applications, where reduced impedance is desirable for achieving activation thresholds and prolonging the lifetime of the implanted power supply. While improvements in recording quality were not observed, a combination of flavopiridol with a second strategy which enhances neuronal signal detection may enhance these results in future studies.

There are many different needs for intraoperative mapping in both rodent as well as human situations. Whether the goal of the procedure is for epileptic mapping, removal of cancerous tissue, mapping the motor and sensory cortices, or understanding the underlying neural networks within the brain, dense three-dimensional electrode arrays are necessary. In this study, we outlined and validated thicker silicon probe designs for use in intracortical mapping applications. Multiple shank and electrode site configurations were implanted successfully through rat dura as a model for human pia, and all devices maintained the electrical functionality necessary for electrophysiological mapping applications.

Biosensors interact with biological systems at the surface of the sensor. Coating these sensors with electrically active polymers has been suggested to improve this interface. The electrically conducting polymer poly (3, 4 ethylenedioxythiophene) (PEDOT) enhances electrical recordings by improving conductivity while maintaining chemical stability. It also offers great flexibility in studying cell substrate interactions because of the variety of counter-ions that can be incorporated into the PEDOT matrix. To provide any true benefit in cell culture or in vivo experiments, the cytotoxicity of PEDOT must first be determined. This study evaluated the cytotoxicity of PEDOT doped with either polystyrene sulfonate (PSS) or phosphate buffered saline (PBS) ions and tested the efficacy of using the conductive PEDOT substrates for myoblast proliferation and differentiation. Results show that PEDOT/PBS and PEDOT/PSS are not cytotoxic to cells and successfully support cellular proliferation and differentiation. These results establish PEDOT as a material for cell-substrate interface studies. With biosensors being modified using the new polymer coating PEDOT, this cytotoxicity study provides evidence that PEDOT coatings will not induce a cytotoxic response when implanted in vivo.

Photoacoustic (PA) imaging provides excellent optical contrast with decent penetration and high spatial resolution, making it attractive for a variety of neural applications. We evaluated optical contrast agents with high absorption in the near infrared (NIR) as potential enhancers for PA neuroimaging: optical dyes, gold nanorods (GNRs) and PEBBLEs loaded with indocyanine green. Two PA systems were developed to test these agents in excised neural tissue and in vivo mouse brain. Lobster nerves were stained with the agents for 30 minutes and placed in a hybrid nerve chamber capable of electrical stimulation and recording, optical spectroscopy and PA imaging. Contrast agents boosted the PA signal by at least 30 dB using NIR illumination from a tunable pulsed laser. Photobleaching may be a limiting factor for optical dyes-the PA signal decreased steadily with laser illumination. The second setup enabled in vivo transcranial imaging of the mouse brain. A custom clinical ultrasound scanner and a 10-MHz linear array provided near real-time images during and after an injection of 2 nM gold nanorods into the tail vein. The peak PA signal from the brain vasculature was enhanced by up to 2 dB at 710 nm. Temporal dynamics of the PA signal were also consistent with mixing of the GNRs in the blood. These studies provide a baseline for enhanced PA imaging in neural tissue. The smart contrast agents employed in this study can be further engineered for molecular targeting and controlled drug delivery with potential treatment for a myriad of neural disorders.

Delivering drugs directly and locally to the brain tissue opens new approaches to disease treatment and improving neural interfaces. Several approaches using neural prostheses have been made to deliver drugs by bypassing the blood-brain barrier (BBB). In this study, we propose a new local drug delivery system for dynamic control of the neural environment using parylene-based microelectrodes. This polymer-based flexible microelectrode has both drug delivery and electrophysiological recording capabilities in a single probe. An in vitro model using cells found in the chronic neural probe environment provides control of independent variables and thus a useful environment to test the efficacy of delivered drugs. The in vitro model uses a combination of meningeal fibroblasts, microglia and astrocytes plated directly on the microelectrode sites. The drug delivery system utilizes two different drug delivery strategies: (1) a liquid phase drug delivery for water soluble drugs via an integrated microfluidic port, and (2) drug-embedded nanoparticle-mediated delivery for water insoluble drugs pre-loaded into a passive microfluidic port. We are currently characterizing the effects of dexamethasone (DEX) delivery on cell development using impedance spectroscopy and fluorescence microscopy. Early results show that electrode sites with plated cells on functional probes increase the impedance. This local drug delivery system provides an efficient testing protocol for therapeutic drugs intended to improve the neural interface.

Alginate is a commonly used biomedical hydrogel whose in vivo degradation behavior is only beginning to be understood. The use of alginate in the central nervous system is gaining popularity as an electrode coating, cell encapsulation matrix, and for duraplasty. However, it is necessary to understand how the hydrogel will behave in vivo to aid in the development of alginate for use as a neural interface material. The goal of the current study was to compare the rheological behavior of explanted alginate disks and the inflammatory response to subcutaneously implanted alginate hydrogels over a 3-month period. Specifically, the effects due to (1) in situ gelling, (2) diffusion gelling, and (3) use of a poly-l-lysine (PLL) coating were investigated. While all samples' complex moduli decreased 80% in the first day, in situ gelled alginate was more stable for the first week of implantation. The PLL coating offered some stability increases for diffusion gelled alginate, but the stability in both conditions remained significantly lower than that in in situ gelled alginate. There were no differences in biocompatibility that clearly suggested one gelation method over another. These results indicate that in situ gelation is the preferred method in neural interface applications where stability is the primary concern.

This paper presents a review of our neural interface research program and provides a brief introduction to the field. We focus on three key areas which aim to minimize encapsulating tissue response to chronic neural interfaces: interface architecture, mechanical stresses, and stem cell-seeded probes. We explore these areas and present our current solutions which have led to the demonstration of cortical control of neuromotor prostheses (NMPs).

While the development of silicon-substrate microelectrode arrays has enabled chronic recording of single unit activity from multiple neurons simultaneously, accurate interpretation of the signals depend on the anatomical placement of the electrodes. Toward this end, this paper develops an in vivo method for identifying the placement of electrodes based on laminar analysis of ketamine-xylazien-induced field potential oscillations in rat motor cortex. The proposed method is based on finding the polarity reversal in laminar oscillations which is reported to appear in upper part of layer V in laminar High Voltage Spindles (HVSs) of rat cortical column. Analysis of histological images showed a 21 mum error in the estimate of the polarity reversal depth compared to the expected range (850-1050 mum). One out of the four rats did not undergo a phase reversal. Histology verified that the electrode was placed deeper than 1050 jim. We propose that this method can be used to determine an estimate of laminar electrodes implanted in rat motor cortex

The interface between neural prostheses and neural tissue plays a significant role in the long term performance of these devices. Conducting polymers have been used to modify the electrical properties of neural microelectrodes. The objective of this study was to evaluate recording chronic neural activity of neural microelectrodes that were modified with nanofibers-templated of poly (3,4-ethylenedioxythiophene) (PEDOT) nanotubes over seven week periods using impedance spectroscopy and signal-to-noise ratio measurements. PEDOT nanotubes-coated sites were found to have lower impedance and higher signal-to-noise ratio than control site.

We investigated fast wave propagation in auditory cortex of an alert cat using a chronically implanted microelectrode array. A custom, real-time imaging template exhibited wave dynamics within the 33-microwire array (3 mm(2)) during ten recording sessions spanning 1 month post implant. Images were based on the spatial arrangement of peri-stimulus time histograms at each recording site in response to auditory stimuli consisting of tone pips between 1 and 10 kHz at 75 dB SPL. Functional images portray stimulus-locked spiking activity and exhibit waves of excitation and inhibition that evolve during the onset, sustained and offset period of the tones. In response to 5 kHz, for example, peak excitation occurred at 27 ms after onset and again at 15 ms following tone offset. Variability of the position of the centroid of excitation during ten recording sessions reached a minimum at 31 ms post onset (sigma = 125 microm) and 18 ms post offset (sigma = 145 microm), suggesting a fine place/time representation of the stimulus in the cortex. The dynamics of these fast waves also depended on stimulus frequency, likely reflecting the tonotopicity in auditory cortex projected from the cochlea. Peak wave velocities of 0.2 m s(-1) were also consistent with those purported across horizontal layers of cat visual cortex. The fine resolution offered by microimaging may be critical for delivering optimal coding strategies used with an auditory prosthesis. Based on the initial results, future studies seek to determine the relevance of these waves to sensory perception and behavior.

This study investigated relationships between a microscale neural probe's size and shape and its chronic reactive tissue response. Parylene-based probes were microfabricated with a thick shank (48 microm by 68 microm) and an integrated thin lateral platform (5 microm by 100 microm, either solid or one of three lattice sizes). Devices were implanted in rat cerebral cortex for 4 weeks before immunostaining for neurons, astrocytes, microglia, fibronectin, laminin, and neurofilament. While nonneuronal density (NND) generally increased and neuronal density decreased within 75 microm of a probe interface compared to unimplanted control regions, there were significant differential tissue responses within 25 microm of the platform's lateral edge compared to the shank. The NND in this region of the lateral edge was less than one-third of the corresponding region of the shank (129% and 425% increase, respectively). Moreover, neuronal density around the platform lateral edge was about one-third higher than at the shank (0.70 and 0.52 relative to control, respectively). Also, microglia reactivity and extracellular protein deposition was reduced at the lateral edge. There were no significant differences among platform designs. These results suggest that neural probe geometry is an important parameter for reducing chronic tissue encapsulation.

Chronic tissue response induced by tethering is one of the major causes for implant failure in intracortical microelectrodes. In this study, we had explored the hypothesis that flexible interconnects could provide strain relief against forces of "micromotion" and hence could result in maintaining a healthy tissue surrounding the implant. Finite element modeling results indicated that flexible interconnects, namely polyimide (E=2 GPa) and polydimethylsiloxane (PDMS, E=6 MPa), reduced the interfacial strain by 66% and two orders of magnitude, respectively. Quantitative immunohistochemistry results indicated that significant neuronal loss occurred up to 60 mum from the implant interface. This was strongly correlated to both glial fibrillary acidic protein (GFAP) expression and simulated strain as a function of distance away from the implant.

Intracortical microelectrode recordings of neural activity show great promise as control signals for neuroprosthetic applications. However, faithful, consistent recording of single unit spiking activity with chronically implanted silicon-substrate microelectrode arrays has proven difficult. Many approaches seek to enhance the long-term performance of microelectrode arrays by, for example, increasing electrode biocompatibility, decreasing electrode impedance, or improving electrode interface properties through application of small voltage pulses. The purpose of this study was to use computational models to optimize the design of microelectrodes. We coupled detailed models of the neural source signal, silicon-substrate microelectrodes, and thermal noise to define the electrode contact size that maximized the signal-to-noise ratio (SNR). Model analysis combined a multi-compartment cable model of a layer V cortical pyramidal neuron with a 3D finite element model of the head and microelectrode to define the amplitude and time course of the recorded signal. A spatially-lumped impedance model was parameterized with in vitro and in vivo spectroscopy data and used to define thermal noise as a function of electrode contact size. Our results suggest that intracortical microelectrodes with a contact size of ~380 microm2 will provide an increased SNR in vivo and improve the long-term recording capabilities of silicon-substrate microelectrode arrays.

� Abstract—Studies examining traumatic brain injury have suggested a 'window of opportunity' exists for therapeutic agents to mitigate edema and cellular toxicity effectively. However, successful therapy also relies on identifying the extent of blood-brain barrier disruption, which is associated with excessive extra-cellular concentrations of ions, excitatory amino acids, and serum proteins. The following study investigates the use of pH-selective hydrous iridium oxide microelectrodes to assess trauma following insertion of a neural probe. Electrochemical activation of iridium microelectrode arrays was performed in either acidic (0.5 M H2SO4) or weak basic (0.3 M Na2HPO4, pH = 8.56) solutions. Both oxides demonstrated super-Nernstian pH sensitivity (-88.5 mV/pH and -77.1 mV/pH, respectively) with little interference by other cations. Data suggest that acid-grown oxide provides better potential stability than base-grown oxide (�1 = 2.8 versus 4.9 mV over 5 hours). Implantation of these electrodes into motor cortex and dorsal striatum revealed significant acidosis during and following insertion. Variability in the spatiotemporal pH profile included micro-scale inhomogeneities along the probe shank and significant differences in the averaged pH response between successive insertions using the same depth and speed. This diagnostic technology has important implications for intervention therapies in order to more effectively treat acute surgical brain trauma.

Conductive polymer coatings can be used to modify traditional electrode recording sites with the intent of improving the long-term performance of cortical microelectrodes. Conductive polymers can drastically decrease recording site impedance, which in turn is hypothesized to reduce thermal noise and signal loss through shunt pathways. Moreover, conductive polymers can be seeded with agents aimed at promoting neural growth toward the recording sites or minimizing the inherent immune response. The end goal of these efforts is to generate an ideal long-term interface between the recording electrode and surrounding tissue. The goal of this study was to refine a method to electrochemically deposit surfactant-templated ordered poly(3,4-ethylenedioxythiophene) (PEDOT) films on the recording sites of standard 'Michigan' probes and to evaluate the efficacy of these modified sites in recording chronic neural activity. PEDOT-coated site performance was compared to control sites over a six-week evaluation period in terms of impedance spectroscopy, signal-to-noise ratio, number of viable unit potentials recorded and local field potential recordings. PEDOT sites were found to outperform control sites with respect to signal-to-noise ratio and number of viable unit potentials. The benefit of reduced initial impedance, however, was mitigated by the impedance contribution of typical silicon electrode encapsulation. Coating sites with PEDOT also reduced the amount of low-frequency drift evident in local field potential recordings. These findings indicate that electrode sites electrochemically deposited with PEDOT films are suitable for recording neural activity in vivo for extended periods. This study also provided a unique opportunity to monitor how neural recording characteristics develop over the six weeks following implantation.

Intracortical microelectrodes currently have the greatest potential for achieving a functional neural prosthesis in patients with neurodegenerative diseases or spinal cord injury. Device efficacy is lacking in long-term performance as seen in both chronological histology and biopotential recording studies.Some researchers have shown that small single polymer fibers (less than 7-μm diameter) do not induce an encapsulation layer in the rat subcutis so we have extended this concept to neural probe design. In this experiment we investigated the brain-tissue response of polymer probes with 4-μm feature sizes that are capable of withstanding insertion forces when penetrating the rat neocortex. This polymer probe has both a stiff penetrating shank (70-μm by 42-μm) and fine polymer structures (4-μm by 5-μm) that extend laterally from the shank. Our testing verifies that despite a flexible substrate and small dimensions, these devices are mechanically robust and practical as neural probes. We developed a microfabrication process using SU-8 and parylene to create the relatively thick probe shank and thin lateral arms.In vivo testing was conducted on seven Sprague-Dawley rats. These parylene devices were chronically implanted in the motor cortex for 4-weeks and then imaged using fluorescence microscopy. Cellular encapsulation and neuronal loss were assessed using a Hoechst counterstain and the immunomarker NeuN (neuronal nuclei).The tissue reactivity immediately around the fine-feature structures is greatly reduced, showing mild cell encapsulation (90±68% increase) relative to the probe shank (460±320% increase). Neuronal loss was only (21±25%) out to 25-μm relative to significant loss around the probe shank (47±19%). Additionally, laminin+, fibronectin+, and Ox42+ tissue often showed greater intensity and thickness at the shank, indicating that the dense scar formation typical of cortical implants was mitigated around the fine lateral structure.These results suggest that using MEMS-based microfabrication to create sub-cellular structures will significantly reduce encapsulation, which should extend the longevity of neural probes. We also believe this concept could be beneficial to any implantable sensor capable of scaled geometries.

The viability of chronic neural microelectrodes for electrophysiological recording and stimulation depends on several factors, including the encapsulation of the implant by a reactive tissue response. We postulate that mechanical strains induced around the implant site may be one of the leading factors responsible for the sustained tissue response in chronic implants. The objectives of this study were to develop a finite-element model of the probe-brain tissue interface and analyze the effects of tethering forces, probe-tissue adhesion and stiffness of the probe substrate on the interfacial strains induced around the implant site. A 3D finite-element model of the probe-brain tissue microenvironment was developed and used to simulate interfacial strains created by 'micromotion' of chronically implanted microelectrodes. Three candidate substrates were considered: (a) silicon, (b) polyimide and (c) a hypothetical 'soft' material. Simulated tethering forces resulted in elevated strains both at the tip and at the sharp edges of the probe track in the tissue. The strain fields induced by a simulated silicon probe were similar to those induced by a simulated polyimide probe, albeit at higher absolute values for radial tethering forces. Simulations of poor probe-tissue adhesion resulted in elevated strains at the tip and delamination of the tissue from the probe. A tangential tethering force results in 94% reduction in the strain value at the tip of the polyimide probe track in the tissue, whereas the simulated 'soft' probe induced two orders of magnitude smaller values of strain compared to a simulated silicon probe. The model results indicate that softer substrates reduce the strain at the probe-tissue interface and thus may also reduce tissue response in chronic implants.

We describe here a neurotrophic electrode designed to improve long-term reliability and signal-to-noise in a brain-device interface. Our electrode consists of a fine microwire inside a polyimide tube. The polyimide tube is filled with nerve growth factor (NGF) incorporated into a fibrin matrix. Our goal is to have a neurite grow into the tube. The close apposition between neurite and the recording wire should enhance signal-to-noise. The physical connection between device and tissue should improve reliability. We have implanted complete devices in 4 rats. Each rat gets a four-electrode device implanted in the barrel cortex of each hemisphere. Each electrode is filled with a different test substance. One control tube contains only saline, and another contains only the fibrin matrix. The other two electrodes in each array are filled with different concentrations of NGF. Once weekly following the implant, each rat is sedated, and electrical activity in each of the electrodes recorded. Electrodes in 5 of the 8 implants exhibited multi-unit spindling activity. A direct comparison of the amplitude of action potentials over time in each of the types of implants shows that the presence of NGF within the polyimide tube leads to an increase in action potential amplitude.