Search

A triphasic scaffold composed of BMSCs-loaded PLGA scaffold, chondroitin sulfate and BG-loaded PLCL membrane and 3D-printed ceramic scaffold was prepared to mimic the osteochondral structure and achieved good regeneration in rabbits and pigs.

Patients with diabetes suffer from a variety of complications and easily develop diabetic chronic wounds. The microenvironment of diabetic wounds is characterized by an excessive amount of reactive oxygen species (ROS) and an imbalance of proinflammatory and anti-inflammatory cells/factors, which hinder the regeneration of chronic wounds. In the present study, a wound dressing with immunomodulation and electroconductivity properties was prepared and assayed in vitro and in vivo. [2-(acryloyloxy) ethyl] Trimethylammonium chloride (Bio-IL) and gelatin methacrylate (GelMA) were 3D printed onto a doxycycline hydrochloride (DOXH)-loaded and ROS-degradable polyurethane (PFKU) nanofibrous membrane, followed by UV irradiation to obtain conductive hydrogel strips. DOXH was released more rapidly under a high ROS environment. The dressing promoted migration of endothelial cells and polarization of macrophages to the anti-inflammatory phenotype (M2) in vitro. In a diabetic rat wound healing test, the combination of conductivity and DOXH was most effective in accelerating wound healing, collagen deposition, revascularization, and re-epithelialization by downregulating ROS and inflammatory factor levels as well as by upregulating the M2 macrophage ratio. STATEMENT OF SIGNIFICANCE: The microenvironment of diabetic wounds is characterized by an excessive amount of reactive oxygen species (ROS) and an imbalance of proinflammatory and anti-inflammatory cells/factors, which hinder the regeneration of chronic wounds. Herein, a wound dressing composed of a DOXH-loaded ROS-responsive polyurethane membrane and 3D-printed conductive hydrogel strips was prepared, which effectively accelerated skin regeneration in diabetic wounds in vivo with better epithelialization, angiogenesis, and collagen deposition. DOXH regulated the dysfunctional wound microenvironment by ROS scavenging and polarizing macrophages to M2 phenotype, thereby playing a dominant role in diabetic wound regeneration. This design may have great potential for preparing other similar materials for the therapy of other diseases with excessive inflammation or damage to electrophysiological organs, such as nerve defect and myocardial infarction.

Both of the surface topographical features and distribution of biochemical cues can influence the cell-substrate interactions and thereby tissue regeneration in vivo. However, they have not been combined simultaneously onto a biodegradable scaffold to demonstrate the synergistic role so far. In this study, a proof-of-concept study is performed to prepare micropatterns and peptide gradient on the inner wall of a poly (D,L-lactide-co-caprolactone) (PLCL) guidance conduit and its advantages in regeneration of peripheral nerve in vivo. After linear ridges/grooves of 20/40 μm in width are created on the PLCL film, its surface is aminolyzed in a kinetically controlled manner to obtain the continuous gradient of amino groups, which are then transferred to CQAASIKVAV peptide density gradient via covalent coupling of glutaraldehyde. The Schwann cells are better aligned along with the stripes, and show a faster migration rate toward the region of higher peptide density. Implantation of the nerve guidance conduit made of the PLCL film having both the micropatterns and peptide gradient can significantly accelerate the regeneration of sciatic nerve in terms of rate, function recovery and microstructures, and reduction of fibrosis in muscle tissues. Moreover, this nerve conduit can also benefit the M2 polarization of macrophages and promote vascularization in vivo., Graphical abstract Dual gradient of nerve-affinitive CQAASIKVAV peptides and linear ridges/grooves on the inner surface of biodegradable guidance conduit synergistically promote the regeneration of sciatic nerve in terms of rate, function recovery and microstructures, and reduction of fibrosis in muscle tissues in vivo.Image 1, Highlights • CQAASIKVAV peptide gradient and micropatterns are integrated on inner surface of a nerve regeneration conduit. • Cell alignment and migration are promoted toward the region of a higher peptide density. • The peptide gradient and micropatterns can synergistically accelerate the regeneration of sciatic nerve in vivo.

Immunomodulation is an important phenomenon in the normal mammalian host response toward an injury, and plays a critical role in tissue regeneration and regenerative medicine. Different phenotypes of macrophages show an array of activation states compassing pro-inflammatory to pro-alleviating cells, which are the critical players to modulate immune response and tissue regeneration. In this study, macrophage membranes of different phenotypes (macrophages (M0), classically activated macrophages (M1) and alternatively activated macrophages (M2)) were coated onto poly-ε-caprolactone (PCL) nanofibers to acquire exterior surface proteins and similar functions of the natural membranes. In vitro results unveiled that these nanofibers, especially the M2-PCL nanofibers, can suppress the activities of inflammatory markers such as TNF-α and IL-1β, and stimulate anti-inflammatory markers such as Arg-1, IL-10 and TGF-β. In a C57BL/6 mouse model, the macrophage membrane-coated nanofibers, especially the M2-PCL nanofibers, displayed minimal cellular infiltration and low collagen deposition, increased anti-inflammatory CD206 and decreased inflammatory CD86 levels. The M2-PCL nanofibers most effectively neutralized inflammatory chemokines, regulated the expression of inflammation-associated genes as well as anti-inflammatory genes, and showed strong immunomodulatory effects than the PCL, M0-PCL and M1-PCL nanofibers. STATEMENT OF SIGNIFICANCE: Different types of macrophage membrane-functionalized PCL nanofibers were successfully prepared and well characterized. They inherited the surface proteins imitating the source macrophages, and played an important role in limiting cellular infiltration and collagen deposition. These different macrophages and their membrane-coated nanofibers (M0-PCL, M1-PCL and M2-PCL) behaved like their respective source cells. The M2 mimicking M2-PCL nanofibers effectively polarized macrophages to M2 phenotype and decreased the expression of inflammation-associated chemokines and promoted the anti-inflammation in vitro and in vivo, which is critical for tissue regeneration. The mice implanted with the bio-mimicking M2-PCL nanofibers effectively inhibited toll like receptors signaling induced NF-kB and IRF-5 and their target genes such as Edn-1, IL-6, iNOS, TNF-α, etc. compared to the PCL, and M0-PCL and M1-PCL macrophage membrane-coated nanofibers.

Physical forces are important cues in determining the development and the normal function of biological tissues. While forces generated by molecular motors have been widely studied, forces resulting from osmotic gradients have been less considered in this context. A possible reason is the lack of direct in-situ measurement methods that can be applied to cell and organ culture systems. Herein, novel kinds of FRET (resonance energy transfer)-based liposomal sensors are developed, so that their sensing range and sensitivity can be adjusted to satisfy physiological osmotic conditions. Several types of sensors are prepared, either based on PEGylated liposomes with steric stabilization and stealth property or on crosslinked liposomes capable of enduring relatively harsh environments for liposomes (e.g., in the presence of biosurfactants). The sensors are demonstrated to be effective in the measurement of osmotic pressures in pre-osteoblastic in-vitro cell culture systems by means of FRET microscopy. This development paves the way towards the in-situ sensing of osmotic pressures in biological culture systems. This article is protected by copyright. All rights reserved.

The macrophages take significant roles in homeostasis, phagocytosis of pathogenic organisms, and modulation of host defense and inflammatory processes. In this study, the enantiomeric poly-D-lysine (PDL) and poly-L-lysine (PLL) were conjugated to gold nanorods (AuNRs) to study their influence on the polarization of macrophages. The AuNRs capped with cetyl trimethyl ammonium bromide (CTAB) (AuNRs@CTAB) exhibited larger toxicity to macrophages when their concentration was higher than 50 μg/ml, whereas the AuNRs@PDL and AuNRs@PLL showed neglectable toxicity at the same concentration compared with the control. The AuNRs@PDL and AuNRs@PLL were internalized into the macrophages with a higher value than the AuNRs@CTAB as revealed by transmission electron microscopy (TEM) and inductively coupled plasma mass spectrometry (ICP-MS) characterization. Unlike the grafted PDL/PLL on flat substrates, the AuNRs@PDL and AuNRs@PLL were not able to polarize M0 macrophages to any other phenotype after internalization as confirmed by ELISA, flow cytometry, and fluorescence microscopy analysis. Nonetheless, the expression of M1 phenotype markers was reduced after the internalization of AuNRs@PDL and AuNRs@PLL by M1 macrophages. The assays of ELISA, flow cytometry, and reactive oxygen species levels exhibited decrease in inflammation of the M1 macrophages.

Infection can disturb the wound healing process and lead to poor skin regeneration, chronic wound, septicemia and even death. To combat the multi-drug resistance bacteria or fungi, it is urgent and necessary to develop advanced antimicrobial wound dressings. In this study, a composite hydrogel dressing composed of polyvinyl alcohol (PVA), agarose, glycerol and antibacterial hyperbranched polylysine (HBPL) was prepared by a freeze-thawing method. The hydrogel showed robust mechanical properties, and the HBPL in the hydrogel displayed effective and broad-spectrum antimicrobial properties to bacteria and fungi as well as biofilms. The composite hydrogel exhibited good biocompatibility with respect to the levels of cells, blood, tissue and main organs. In an animal experiment of an infected wound model, the hydrogel significantly eliminated the infection and accelerated the wound regeneration with better tissue morphology and angiogenesis. The hydrogel also successfully achieved scalable production of over 600 g with a yield over 90 %, suggesting the great potential for the application in practice.

Background: In this study, a new composite biological mesh named SFP was prepared by combining silk fibroin with polypropylene mesh. The mechanism and clinical application value of the SFP composite mesh were explored.Methods: The fibrous membrane was prepared by electrospinning of silk fibroin. The silk fibrous membrane was adhered to the polypropylene mesh by fibrin hydrogel to make a new composite mesh. The characterizations were verified by structural analysis and in vitro cell experiments. A total of 40 Sprague–Dawley rats were randomly divided into two groups, and 20 rats in each group were implanted with the SFP mesh and pure polypropylene mesh, respectively. The rats were sacrificed in batches on the 3rd, 7th, 14th, and 90th days after surgery. The adhesion degree and adhesion area on the mesh surface were compared, and a histopathological examination was carried out.Results:In vitro cell function experiments confirmed that the SFP mesh had good cell viability. The control group had different degrees of adhesion on the 3rd, 7th, 14th, and 90th days after surgery. However, there was almost no intraperitoneal adhesions on the 3rd and 7th days after surgery, and some rats only had mild adhesions on the 14th and 90th days after surgery in the SFP group. There were statistically significant differences in the postoperative intraperitoneal adhesion area and adhesion degree between the two groups (p < 0.05). Histopathological examination confirmed that the mesenchymal cells were well arranged and continuous, and there were more new capillaries and adipocyte proliferation under the mesenchymal cells in the SFP group.Conclusion: The SFP mesh shows good biocompatibility and biofunction in vitro and in vivo. It can promote the growth of peritoneal mesenchymal cells. The formation of a new mesenchymal cell layer can effectively reduce the extent and scope of adhesion between the mesh and abdominal organs. The SFP mesh will have a good application prospect in the field of abdominal wall hernia repair.

Weak tissue adhesion remains a major challenge in clinical translation of microneedle patches. Mimicking the structural features of honeybee stingers, stiff polymeric microneedles with unidirectionally backward-facing barbs were fabricated and embedded into various elastomer films to produce self-interlocking microneedle patches. The spirality of the barbing pattern was adjusted to increase interlocking efficiency. In addition, the micro-bleeding caused by microneedle puncturing adhered the porous surface of the patch substrate to the target tissue via coagulation. In the demonstrative application of myocardial infarction treatment, the bioinspired microneedle patches firmly fixed on challenging beating hearts, significantly reduced cardiac wall stress and strain in the infarct, and maintained left ventricular function and morphology. In addition, the microneedle patch was minimally invasively implanted onto beating porcine heart in 10 minutes, free of sutures and adhesives. Therefore, the honeybee stinger-inspired microneedles could provide an adaptive and convenient means to implant patches for various medical applications. STATEMENT OF SIGNIFICANCE: Adhesion between tissue and microneedle patches with smooth microneedles is usually weak. We introduce a novel barbing method of fabricating unidirectionally backward facing barbs with controllable spirality on the microneedles on microneedle patches. The microneedle patches self-interlock on mechanically dynamic beating hearts, similar to honeybee stingers. The micro-bleeding and coagulation on the porous surface provide additional adhesion force. The microneedle patches attenuate left ventricular remodeling via mechanical support and are compatible with minimally invasive implantation.

Hydrogels are three-dimensional platforms that serve as substitutes for native extracellular matrix. These materials are starting to play important roles in regenerative medicine because of their similarities to native matrix in water content and flexibility. It would be very advantagoues for researchers to be able to regulate cell behavior and fate with specific hydrogels that have tunable mechanical properties as biophysical cues. Recent developments in dynamic chemistry have yielded designs of adaptable hydrogels that mimic dynamic nature of extracellular matrix. The current review provides a comprehensive overview for adaptable hydrogel in regenerative medicine as follows. First, we outline strategies to design adaptable hydrogel network with reversible linkages according to previous findings in supramolecular chemistry and dynamic covalent chemistry. Next, we describe the mechanism of dynamic mechanical microenvironment influence cell behaviors and fate, including how stress relaxation influences on cell behavior and how mechanosignals regulate matrix remodeling. Finally, we highlight techniques such as bioprinting which utilize adaptable hydrogel in regenerative medicine. We conclude by discussing the limitations and challenges for adaptable hydrogel, and we present perspectives for future studies., Graphical abstract Image 1, Highlights • Introduction of adaptable hydrogels with dynamic mechanical properties as 3D extracellular matrix. • Summary of reversible linkages based on supramolecular interactions and dynamic covalent bonds. • Discussion of how adaptable hydrogels provide dynamic mechanical microenvironment and influence cell behaviors and fate. • Overview of applications of adaptable hydrogel in regenerative medicine.

Spatial dimension of pores and interconnection in macroporous scaffolds is of particular importance in facilitating endogenous cell migration and bone tissue ingrowth. However, it is still a challenge to widely tune structure parameters of scaffolds by conventional methods because of inevitable pore geometrical deformation and poor pore interconnectivity. Here, the long-term in vivo biological performances of nonstoichiometric bioceramic scaffolds with different pore dimensions were assessed in critical-size femoral bone defect model. The 6% Mg-substituted wollastonite (CSi-Mg6) powders were prepared via wet-chemical precipitation and the scaffolds elaborately printed by ceramic stereolithography, displaying designed constant pore strut and tailorable pore height (200, 320, 450, 600 μm), were investigated thoroughly in the bone regeneration process. Together with detailed structural stability and mechanical properties were collaboratively outlined. Both μCT and histological analyses indicated that bone tissue ingrowth was retarded in 200 μm scaffolds in the whole stage (2–16 weeks) but the 320 μm scaffolds showed appreciable bone tissue in the center of porous constructs at 6–10 weeks and matured bone tissue were uniformly invaded in the whole pore networks at 16 weeks. Interestingly, the neo-tissue ingrowth was facilitated in the 450 μm and 600 μm scaffolds after 2 weeks and higher extent of bone regeneration and remodeling at the later stage. These new findings provide critical information on how engineered porous architecture impact bone regeneration in vivo. Simultaneously, this study shows important implications for optimizing the porous scaffolds design by advanced additive manufacture technique to match the clinical translation with high performance., Graphical abstract Image 1, Highlights • 6% Mg-substituted wollastonite (CSi-Mg6) bioceramic show appreciable bioactivity and mechanical strength. • Porous CSi-Mg6 scaffolds with precisely controlled pore dimensions are fabricated by ceramic stereolithography. • The favorable pore geometries facilitating neo-bone ingrowth into the center pores of scaffolds are decoded. • CAD-assisted stereolithography opens up opportunities for developing scaffolds with tailored pore architecture.

The degree of tissue injuries such as the level of scarring or organ dysfunction, and the immune response against them primarily determine the outcome and speed of healing process. The successful regeneration of functional tissues requires proper modulation of inflammation-producing immune cells and bioactive factors existing in the damaged microenvironment. In the tissue repair and regeneration processes, different types of biomaterials are implanted either alone or by combined with other bioactive factors, which will interact with the immune systems including immune cells, cytokines and chemokines etc. to achieve different results highly depending on this interplay. In this review article, the influences of different types of biomaterials such as nanoparticles, hydrogels and scaffolds on the immune cells and the modification of immune-responsive factors such as reactive oxygen species (ROS), cytokines, chemokines, enzymes, and metalloproteinases in tissue microenvironment are summarized. In addition, the recent advances of immune-responsive biomaterials in therapy of inflammation-associated diseases such as myocardial infarction, spinal cord injury, osteoarthritis, inflammatory bowel disease and diabetic ulcer are discussed.

As an alternative strategy to achieve the desired bone augmentation, tenting screw technology (TST) has considerably broadened the indications for implant treatment. Titanium tenting screws are typically used in TST to maintain the space for bone regeneration. However, a high degree of osteogenic integration complicate titanium tenting screw removal and impact the bone healing micro-environment. Previous efforts have been focused on modifying titanium surfaces to enhance osseointegration while ignoring the opposite process. Due to the vital role of bone marrow mesenchymal stem cells (BMSCs) in bone regeneration, it might be feasible to reduce osseointegration around titanium tenting screws by resisting the adhesion of BMSCs. Herein, poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was incorporated with a Ti surface in terms of surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The cell apoptosis analysis showed that the new surface would not induce the apoptosis of BMSCs. Then, the adhesive and proliferative behaviors of BMSCs on the surface were analyzed which indicated that the poly(PEGMA) surface could inhibit the proliferation of BMSCs through resisting the adhesion process. Furthermore, in vivo experiments revealed the presence of the poly(PEGMA) on the surface resulted in a lower bone formation and osseointegration compared with the Ti group. Collectively, this dense poly(PEGMA) surface of Ti may serve as a promising material for clinical applications in the future. STATEMENT OF SIGNIFICANCE: The poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was grafted onto a Ti surface by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The PEGMA surface could reduce the osteogenic integration by preventing the adhesion of cells, resulting in a lower pullout force of the modified implant and thereby desirable and feasible applications in dental surgery.

Branched polyethylene (B-PE) elastomer was investigated for its potential medical application as a tarsus construct. The in vitro results showed that the B-PE and processed B-PE films or scaffolds did not exhibit noticeable cytotoxicity to the NIH3T3 fibroblasts and human vascular endothelial cells (ECs). The B-PE scaffolds with a pore size of 280–480 µm were prepared by using a gelatin porogen-leaching method. The porous scaffolds implanted subcutaneously in rats exhibited mild inflammatory response, collagen deposition and fast fibrovascularization, suggesting their good biocompatibility. Quantitative real-time PCR analysis showed low expression of pro-inflammatory genes and up-regulated expressions of collagen deposition and vascularization-related genes, validating the results of historical evaluation in a molecular level. The B-PE scaffolds and Medpor controls were transplanted in rabbits with eyelid defects. The B-PE scaffolds exhibited a similar elastic modulus and provided desirable repair effects with mild fibrous capsulation, less eyelid deformities, and were well integrated with the fibrovascular tissue compared with the Medpor controls.

The regeneration of osteochondral defects faces great challenges because of the limited self-regenerative capabilities of cartilage tissues. In situ inductive regeneration can be realized using bioactive scaffolds combined with endogenous reparative cells. Cell migration could be significantly facilitated by scaffolds with oriented channels. For this purpose, silk fibroin (SF) was composited with collagen (Col) to fabricate extracellular matrix (ECM)-mimetic SF/Col composite scaffolds with random pores, radially aligned pores or axially aligned pores by ice-templated assembly and temperature gradient-guided thermally-induced phase separation. Scanning electron microscopy (SEM) observation confirmed the random and aligned architectures in the respective scaffolds. The three kinds of SF/Col composite scaffolds exhibited a porous structure with a porosity of ∼85%, an appropriate elastic modulus with mechanical anisotropy in the aligned scaffolds, and good biocompatibility. The oriented channels could improve in vivo cell migration and infiltration. During the tissue remodeling processes, the regeneration of osteochondral tissues particularly cartilage was obviously faster in the radially aligned scaffold group than in the other two groups. Nevertheless, satisfactory regeneration was achieved in the two aligned scaffold groups with hyaline cartilage formation at 18 weeks post-surgery, while a hybrid of hyaline cartilage and fibrocartilage was formed in the random scaffold group.

Spinal cord injury (SCI) is an overwhelming and incurable disabling event accompanied by complicated inflammation-related pathological processes, such as excessive reactive oxygen species (ROS) produced by the infiltrated inflammatory immune cells and released to the extracellular microenvironment, leading to the widespread apoptosis of the neuron cells, glial and oligodendroctyes. In this study, a thioketal-containing and ROS-scavenging hydrogel was prepared for encapsulation of the bone marrow derived mesenchymal stem cells (BMSCs), which promoted the neurogenesis and axon regeneration by scavenging the overproduced ROS and re-building a regenerative microenvironment. The hydrogel could effectively encapsulate BMSCs, and played a remarkable neuroprotective role

Severe traction injuries after stretch to peripheral nerves are common and challenging to repair. The nerve guidance conduits (NGCs) are promising in the regeneration and functional recovery after nerve injuries. To enhance the repair of severe nerve traction injuries, in this study KHIFSDDSSE (KHI) peptides were grafted on a porous and micropatterned poly(D,L-lactide-co-caprolactone) (PLCL) film (MPLCL), which was further loaded with a nerve growth factor (NGF). The adhesion number of Schwann cells (SCs), ratio of length/width (L/W), and percentage of elongated SCs were significantly higher in the MPLCL-peptide group and MPLCL-peptide-NGF group compared with those in the PLCL group in vitro. The electromyography (EMG) and morphological changes of the nerve after severe traction injury were improved significantly in the MPLCL-peptide group and MPLCL-peptide-NGF group compared with those in the PLCL group in vivo. Hence, the NGCs featured with both bioactive factors (KHI peptides and NGF) and physical topography (parallelly linear micropatterns) have synergistic effect on nerve reinnervation after severe traction injuries.

Pneumonia is a common but serious infectious disease, and is the sixth leading cause for death. The foreign pathogens such as viruses, fungi, and bacteria establish an inflammation response after interaction with lung, leading to the filling of bronchioles and alveoli with fluids. Although the pharmacotherapies have shown their great effectiveness to combat pathogens, advanced methods are under developing to treat complicated cases such as virus-infection and lung inflammation or acute lung injury (ALI). The inflammation modulation nanoparticles (NPs) can effectively suppress immune cells and inhibit inflammatory molecules in the lung site, and thereby alleviate pneumonia and ALI. In this review, the pathological inflammatory microenvironments in pneumonia, which are instructive for the design of biomaterials therapy, are summarized. The focus is then paid to the inflammation-modulating NPs that modulate the inflammatory cells, cytokines and chemokines, and microenvironments of pneumonia for better therapeutic effects. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease.

Acute lung injury (ALI) is associated with excessive inflammatory response, leading to acute respiratory distress syndrome (ARDS) without timely treatment. A fewer effective drugs are available currently to treat the ALI/ARDS. Herein, a therapeutic nanoplatform with reactive oxygen species (ROS)-responsiveness was developed for the regulation of inflammation. Dexamethasone acetate (Dex) was encapsulated into poly(thioketal) polymers to form polymeric nanoparticles (NPs) (PTKNPs@Dex). The NPs were composed of poly(1,4-phenyleneacetonedimethylene thioketal) (PPADT) and polythioketal urethane (PTKU), in which the thioketal bonds could be cleaved by the high level of ROS at the ALI site. The PTKNPs@Dex could accumulate in the pulmonary inflammatory sites and release the encapsulated payloads rapidly, leading to the decreased ROS level, less generation of pro-inflammatory cytokines, and reduced lung injury and mortality of mice. RNA sequencing (RNA-seq) analysis showed that the therapeutic efficacy of the NPs was associated with the modulation of many immune and inflammation-linked pathways. These findings provide a newly developed nanoplatform for the efficient treatment of ALI/ARDS.

Selective adhesion and migration of urethral epithelial cells (HUCs) over fibroblasts (FIBs) are very important in the reconstruction of the urethral epithelial layer and prevention of ureteral scarring and stenosis. In this study, unsaturated polyurethane (PPFU-CO-SS) films were co-grafted with a cell-resisting poly(ethylene glycol) (PEG) layer and HUC-selective Cys-Ala-Gly (CAG) peptides, whose physicochemical changes were confirmed by X-ray photon spectroscopy, fluorescence spectroscopy and water contact angle measurements. The adhesion and activation of platelets on the PEG/CAG grafted surface were significantly reduced compared to those on the PPFU-CO-SS, resulting in a similar status as that on a PEG-grafted surface. The HUC-selective material could obviously promote the adhesion and migration of HUCs. The ratio of the urethral epithelial cells to fibroblasts on the PEG/CAG grafted surface was nearly 3-fold that on the unmodified PPFU-CO-SS in a co-culture competitive environment. The urethral epithelial cells cultured on the PEG/CAG grafted surface also had the highest migration rate, which was 2.24-fold compared to that on the PPFU-CO-SS control.

In women of reproductive age, severe injuries to the endometrium are often accompanied by endometrial scar formation or intrauterine adhesions (IUAs), which can result in infertility or miscarriage. Although many approaches have been used to treat severe IUAs, high recurrence rates and endometrial thinning have limited therapeutic efficiency. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrial regeneration. The CS/UC-MSCs promoted human endometrial stromal cell proliferation and inhibited apoptosis in vitro through paracrine effects. In a model of endometrial damage, transplantation with the CS/UC-MSCs maintained normal luminal structure, promoted endometrial regeneration and collagen remodeling, induced intrinsic endometrial cell proliferation and epithelium recovery, and enhanced the expression of estrogen receptor α and progesterone receptor. An improved ability of the regenerated endometrium to receive embryos was confirmed. Together, our results indicate that the CS/UC-MSCs promoted endometrial structural reconstruction and functional recovery. Topical administration of the CS/UC-MSCs after trans-cervical resection of adhesions might prevent re-adhesion, promote endometrium regeneration and improve pregnancy outcomes for patients with severe IUAs. STATEMENT OF SIGNIFICANCE: Intrauterine adhesions due to severe endometrium injuries happen frequently in clinic and become one of the crucial reasons for women's infertility or miscarriage. Therefore, how to regenerate the damaged endometrium is a big challenge. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrium regeneration. Herein, UC-MSCs, known for low immunogenicity and high proliferative potential, exhibit promising potential for endometrium regeneration; and collagen scaffolds provide suitable physical support. It was proved that transplantation with CS/UC-MSCs promoted endometrial regeneration and fertility restoration. It suggested that topical administration of CS/UC-MSCs in uterus could be a promising strategy for patients suffering severe intrauterine adhesion and infertility.

We have developed the new core-shell bioceramic CSi-Sr4@CaP-px microspheres with tuning porous shell layer so that the biodegradation of both CSi-Sr4 core and CaP shell is readily adjusted synergistically. This is for the first time, to the best of our knowledge, that the bioceramic scaffolds concerning gradient distribution and microstructure-tailoring design is available for tailoring biodegradation and ion release (bioactivity) to optimizing osteogenesis. Furthermore, it is possibly helpful to develop new bioactive scaffold system for time-dependent tailoring bioactivity and microporous structure to significantly enhance bone regeneration and repair applications, especially in some non-load-bearing arbitrary 3D anatomical bone and teeth defects.

The modulation of inflammation in tissue microenvironment takes an important role in cartilage repair and regeneration. In this study, a novel hybrid scaffold was designed and fabricated by filling a reactive oxygen species (ROS)-scavenging hydrogel (RS Gel) into a radially oriented poly(lactide-co-glycolide) (PLGA) scaffold. The radially oriented PLGA scaffolds were fabricated through a temperature gradient-guided phase separation and freeze-drying method. The RS Gel was formed by crosslinking the mixture of ROS-responsive hyperbranched polymers and biocompatible methacrylated hyaluronic acid (HA-MA). The hybrid scaffolds exhibited a proper compressive modulus, good ROS-scavenging capability, and cell compatibility.In vivotests showed that the hybrid scaffolds significantly regulated inflammation and promoted regeneration of hyaline cartilage after they were implanted into full-thickness cartilage defects in rabbits for 12 w. In comparison with the PLGA scaffolds, the neo-cartilage in the hybrid scaffolds group possessed more deposition of glycosaminoglycans and collagen type II, and were well integrated with the surrounding tissue.

Osteochondral defect refers to the damage of cartilage as well as subchondral bone. Cartilage tissue engineering focusing on the regeneration of cartilage and disregarding the subchondral bone always leads to partial regeneration of the damage, resulting in poor mechanical and physiological properties. A scaffold suitable for in situ inductive regeneration of both types of tissues is urgently needed. In this study, a biphasic scaffold integrated by macro-porous fibrin and 3D-printed wollastonite (containing 8% MgSiO3 (CS-Mg8)) scaffolds, either preloaded with rabbit bone marrow mesenchymal stem cells (BMSCs) or not, were fabricated and used to repair osteochondral defects in vivo (full thickness osteochondral defects in rabbits, 4 mm in diameter and 4 mm in depth with bone marrow blood effusion). The fibrin scaffold had a pore size of 100–200 μm, and was degraded gradually and reached weight loss over 80% at 28 days. The presence of BMSCs could accelerate the degradation rate. BMSCs could well proliferate...

Tissue integration of orbital implants, following orbital enucleation treatment, represents a challenge for rapid fibrovascularization, long-time stability, anti-infection, and even induction of vascule regeneration. The objective of this study was to develop porous calcium-magnesium silicate materials, with good stability, bioactivity, and antibacterial potential as new orbital fillers. Three-dimensional (3D) diopside scaffolds (low dissolvability) were fabricated by direct ceramic ink writing assembly and then followed by one-step sintering at 1150 °C for 3 h. The pore wall of the scaffold was modified by another calcium-magnesium silicate, such as bredigite or akermanite, which dissolves quickly but shows greater angiogenic potential. These two Ca-Mg-silicates can be coated onto the pore strut, and the coating layers were observed to slowly dissolve in Tris buffer. The vascularization-favorable Cu ions, which had been doped into the bredigite or akermanite coating, could also be measured in the immersion medium. A primary angiogenic test in a panniculus carnosus muscle model in rabbit indicated that the Cu-doped bredigite and akermanite coatings were significantly beneficial for the neovascularization in the early stages. These results suggest that the diopside-based porous materials modified with functional coatings hold great potential for application in orbital reconstruction.

The dual functional implants of antibacteria and osteointegration are highly demanded in orthopedic and dentistry, especially for patients who suffer from diabetes or osteoporosis simultaneously. However, there is lack of the facile and robust method to produce clinically applicable implants with this dual function although coatings possessing single function have been extensively developed. Herein, hyperbranched poly-L-lysine (HBPL) polymers were covalently immobilized onto the alkali-heat treated titanium (Ti) substrates and implants by using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as the coupling agent, which displayed excellent antibacterial activity against S. aureus and E. coli with an efficiency as high as 89.4% and 92.2% in vitro, respectively. The HBPL coating also significantly promoted the adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells in vitro. Furthermore, the results of a S. aureus infection rat model in vivo ulteriorly verified that the HBPL-modified screws had good antibacterial and anti-inflammatory abilities at an early stage of implantation and better osteointegration compared with the control Ti screws.

Tissue–biomaterial interactions in different microenvironments influence significantly the repair and regeneration outcomes when a scaffold or construct is implanted. In order to elucidate this issue, a fibrin gel filled macroporous fibrin scaffold (fibrin-based scaffold) was fabricated by loading fibrinogen via a negative pressure method, following with thrombin crosslinking. The macroporous fibrin scaffold exhibited a porous structure with porosity of (88.1 ± 1.3)%, and achieved a modulus of 19.8 ± 0.4 kPa at a wet state after fibrin gel filling, providing a suitable microenvironment for bone marrow-derived mesenchymal stem cells (BMSCs). The in vitro cellular culture revealed that the fibrin-based scaffold could support the adhesion, spreading, and proliferation of BMSCs in appropriate cell encapsulation concentrations. The fibrin-based scaffolds were then combined with BMSCs and lipofectamine/plasmid deoxyribonucleic acid (DNA) encoding mouse-transforming growth factor β1 (pDNA-TGF-β1) complexes to obtain the fibrin-based constructs, which were implanted into osteochondral and tibial defects at young adult rabbits (3 months old) and aged adult rabbits (12 months old) to evaluate their respective repair effects. Partial repair of osteochondral defects and perfect restoration of tibial defects were realized at 18 weeks post-surgery for the young adult rabbits, whereas only partial repair of subchondral bone and tibial bone defects were found at the same time for the aged adult rabbits, confirming the adaptability of the fibrin-based constructs to the different tissue microenvironments by tissue-biomaterial interplays., Graphical Abstract A fibrin-based construct was fabricated to investigate its repair effects in different tissue microenvironments, namely, osteochondral tissue and tibia in young adult rabbits and aged adult rabbits. Influenced by the interactions between the implanted fibrin-based construct and respective tissue microenvironment, the osteochondral defects and tibial defects were partially or completely repaired, confirming the adaptability of the construct to different tissue microenvironments.

Corneal chemical injury is a general but intractable ocular emergency, the sequelae of which are particularly challenging to treat. Human amniotic membrane (HAM) is one of the resources as a wound dressing for damaged corneal reconstruction, but the concerns related to the possible transmission of infectious diseases are the main drawbacks. Here we present a versatile method utilizing electrospinning and surface modification processes to develop optically highly transparent, microstructurally stable (>20 MPa in tensile strength in the wet state) biomimetic nanofibrous membranes. These membrane nanofibers, mainly consisting of a collagen–hyaluronate interior and a chitosan surface coating, showed superior mechanical and biological performances compared to HAM, and were favorable to the selective adhesion of epithelial cells (corneal, conjunctival) and fibroblasts. The alkali-burned corneal damage model in rats demonstrated that the biomimetic membranes could markedly improve re-epithelialization in corneal tissue within one week. Therefore, such bioactive multifunctional membranes may find widespread biomedical applications in wound healing and postoperative anti-adhesion in the near future.

The integration of physicochemical and biological performances in root canal treatment represents a challenge for long-time antileakage, antibacterial, and even inducing periradicular cementum/bone tissue regeneration. The objective of this work is to develop a β-Ca2SiO3 (β-C2Si)-based cement as a new root canal filler with good antibacterial ability, sealability and bioactivity. β-C2Si powders with controllable free CaO content were prepared by regulating the calcium/silicate molar ratio in reaction medium. It was demonstrated that a composite paste with 10-30 wt% α-gypsum at a liquid-to-powder ratio of 0.6 ml g-1 remained injectable for 12 min and provided a significant pH rise during setting. Notably, the hydraulic cements with high free CaO contents exhibited bactericidal or bacteriostatic properties against three bacterial strains, Streptococci mutans, Actinomyces naeslundii, and Actinomyces viscosus, which were demonstrated by the agar diffusion method. Also, the injected paste in root canal ex vivo showed extremely low microleakage of Rhodamine B but a good apatite-mineralization response. Therefore, these intrinsic antibacterial activity, bioactivity, injectability and tight adaption to root canal sealability make β-C2Si/α-gypsum composites preferential candidates for application in endodontics, such as root-end filling, pulp capping therapy, microleakage prevention, as well as for inducing hard tissue regeneration.

Gypsum is a promising material for bone defect repair due to its osteoconductivity, whereas it is still limited in orthopedic and dental surgeries due to its low bioactivity and too rapid resorption so that one major concern is the significant loss in microstructural stability in vivo. In the present strategy some key features were significantly improved by introducing rapidly biodegradable but highly bioactive calcium silicate (CS) for regulating the physicochemical properties and biological performances of the gypsum-based cements at the same liquid/solid ratio. We demonstrated that introduction of 23% CS into β-calcium sulfate hemihydrate (CSH) could improve the physicochemical properties but would not compromise the mechanical strength of the composite. The surface bioactivity was significantly enhanced by introducing 23% CS, and these biphasic composites were favorable for decelerating the biodegradation rate by nearly 18.5% in 28 days in vitro. A mild bioresorption rate, with 39.6% of composite residual 4 weeks after operation, was determined when implanted in subcutaneous tissue of rats. 8 weeks after implantation, the composite cement containing 23% CS significantly enhanced new bone tissue regeneration with a much higher relative bone content (∼68.6%) than pure gypsum in critical size femoral defects in rabbits. The novel CSH–CS biocements represent promising candidates for rapid bone resconstruction and repair in trauma and pathological conditions.

A great number of stimuli-responsive particles have been developed and used for biomedical applications such as intracellular drug delivery. It is of paramount importance to study the intracellular responsive process of these particles, offering insight into the understanding of their structure variation and design criteria for better performance. In this study polyethyleneimine (PEI)-coated poly(lactide-co-glycolide) (PLGA) particles with a diameter of 430 nm were prepared via a one-step emulsion method. The amino groups in the PEI molecules allowed further covalent linking of fluorescein isothiocyanate (FITC), bifunctional coupling agents 3,3′-dithiobispropionimidate, amino-ended polyethylene glycol (NH2–PEG–NH2) and tetramethylrhodamine isothiocyanate (TRITC), resulting in fluorescence resonance energy transfer (FRET) pairs on the particles. The particles exhibited glutathione-responsive ability, and lost the FRET effect due to the separation of FITC/TRITC pairs from the particle surface as a result of the cleavage of disulfide bonds. The particles showed different FRET change rates in A549 cells and HEK293 cells depending on the intracellular GSH concentration. Moreover, a much slower degradation rate was found inside cells than in simulated buffer with a similar GSH concentration. The results suggest that the responsive behaviors of the particles obtained in simulated buffer may not match fully/correctly with the real situation in a complicated intracellular environment.

In this study, four kinds of TiO2 nanorods (TiO2 NRs), with similar aspect ratios but different surface functional groups, i.e. amines (–NH2), carboxyl groups (–COOH) and poly(ethylene glycol) (–PEG), were used to study their interaction with rat bone marrow stem cells (MSCs). The aspect ratios of the TiO2 NRs were measured (50 to 65 nm in length and 8 nm in width) under transmission electron microscopy (TEM). The cellular uptake of the TiO2 NRs was qualitatively studied by TEM and then quantified by inductively coupled plasma mass spectrometry (ICP-MS). The results showed that the MSCs ingested larger amounts of TiO2–core NRs and TiO2–NH2 NRs than those of TiO2–COOH NRs and TiO2–PEG NRs, with similar intracellular distribution patterns. TiO2–core NRs induced the highest cytotoxicity, as a result of the highest intracellular level of reactive oxygen species (ROS), which was lowered upon surface functionalization. The genotoxicity of the TiO2 NRs was neglectable at tested concentrations, studied by the comet assay. The adipogenic and osteogenic differentiation potentials of the MSCs were firstly evaluated in terms of lipid droplet formation and calcium deposition respectively in the presence of the TiO2 NRs. All of the TiO2 NRs did not show an obvious influence on the adipogenic differentiation potential of the MSCs. But TiO2–COOH NRs showed a significant impairment on the osteogenic differentiation behaviors. The influence of TiO2 NRs on the osteogenic differentiation of the MSCs was further quantitatively studied by the expression of osteogenic markers (collagen type I and osteocalcein), at both gene and protein levels. The results confirmed the strongest hindrance of the osteogenic differentiation of the MSCs by TiO2–COOH NRs, due to the up-regulation of transforming growth factor beta 1 (TGF-β1) and fibroblast growth factor (FGF-2). The results provide new information that the differentiation potential of the MSCs can be influenced by the presence of TiO2 NRs with different surface functionalities, suggesting a careful analysis of the biological impact of nanomaterials.

Poly(lactide-co-glycolide) (PLGA) is one of the most attractive biodegradable polymers for loading and delivering payloads, especially in the form of nanoparticles (NPs). In this work, NPs of PLGA with 3 different molecular weights were fabricated using bovine serum albumin (BSA) and polyethyleneimine (PEI) as dispersing agents. Elemental analysis revealed that the loading amounts of BSA and PEI were 40-60 μg mg-1 and 12-15 μg mg-1 in the BSA/PLGA NPs and PEI/PLGA NPs, respectively. About 13-18 μg mg-1 BSA was exposed onto the surface of the BSA/PLGA NPs. No degradation of the PLGA NPs was detected after being incubated in artificial lysosomal fluid or with macrophages in a culture medium for 7 days. The innate immune activation behavior of the BSA/PLGA and PEI/PLGA NPs was evaluated by co-incubation with RAW264.7 cells in vitro. PLGA NPs fabricated with different molecular weights of PLGA showed no difference in stimulating RAW264.7 cells. The PEI/PLGA NPs did not show significant immune activation in terms of secretion of inflammatory cytokines such as tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), and interleukin-1β (IL-1β) too. By contrast, the BSA/PLGA NPs induced a significantly higher expression of TNF-α, likely due to the heterogeneous albumin and existence of endotoxin, and the synergistic role of larger uptake of the BSA/PLGA NPs by macrophages.

Engineering microstructures with bioactive molecules critically influences Schwann cell (SC) behaviors in terms of cellular spatial arrangement and directional migration, which are advantageous for expediting the repair of peripheral nerve defects. In this study, stripe micropatterns were fabricated on poly(D,L-lactide-co-caprolactone) (PLCL) films by thermo-pressing using polydimethylsiloxane (PDMS) stamps with ridges/grooves of 3/3 and 10/10 μm in width. Their surfaces were further entrapped with 0.7 μg cm−2 and 1.9 μg cm−2 gelatin by a facile swelling–shrinking entrapment technique using lower and higher concentrations of gelatin solutions, respectively. The surfaces entrapped with gelatin became more hydrophilic. On the micropatterned surfaces, the water droplet had an ellipse shape and exhibited an orientation along the stripes. The gelatin-entrapped and micropatterned PLCL surfaces could guide the adhered SCs to form an elongated shape with a higher length to width ratio along the stripes. The migration rate of the SCs was significantly enhanced parallel to the stripe direction, and was fastest on the 3/3 μm PLCL films entrapped with 1.9 μg cm−2 gelatin. The vinculin expression, adhesion force and expression of adhesion and migration-related genes such as integrin β1, Rac1, RhoA and Cdc42 revealed a stronger affinity of the SCs to the 3/3 μm PLCL films with a higher gelatin density.

Hypoxia, defined as inadequate oxygen supply at the tissue level, is a common pathological condition in the tumor microenvironment of certain solid tumors, leading to the limited efficiency of oxygen-dependent photodynamic therapy (PDT). To overcome this problem, tumor-targeting oxygen self-carrying nanoparticles are developed for photothermal therapy (PTT) and enhanced PDT to completely eradicate solid tumors. Hydrogen peroxide (H2O2) is a strong oxidant that can release oxygen in the presence of a catalyst or when being heated. The core-shell poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) are obtained by a double emulsion method: the hydrophilic H2O2/poly(vinylpyrrolidone) complex as an oxygen source and hydrophobic IR780 as a PTT/PDT agent are encapsulated into the core and shell of the NPs respectively. The tumor binding molecule, folic acid, is conjugated onto the surface of obtained PLGA NPs to enabling efficient cell uptake and tumor targeting. Once the PLGA-FA/IR780-H2O2 NPs are ingested by HepG2 cells, they can induce the photothermal effect and reactive oxygen species (ROS) are released to kill cancer cells under an 808 nm laser irradiation. The encapsulated H2O2 can supply additional oxygen and in turn significantly enhance the PDT effect. This innovative nanoplatform has exhibited excellent antitumor efficiency, verified vividly by the in vitro and in vivo assays, and may serve as a versatile platform for future cancer therapy.

Nanomaterials have been extensively used in the biomedical field. These nanoscale objects may either promote or restrain immune responses depending on their surface characteristics and compositions. In this study, chitosan (CS) particles prepared using an emulsion-crosslinking method were modified with different amounts of human serum albumin (HSA) and ovalbumin (OVA), resulting in four types of modified CS particles, i.e. CS@HSA-10, CS@HSA-57, CS@OVA-13 and CS@OVA-65, respectively. They had a similar size of about 150 nm in a dry state, and were swollen 2-3 fold in PBS. No significant cytotoxicity was determined toward in vitro cultured RAW264.7 and THP-1 cells. However, all the modified CS particles, in particular the OVA-modified ones (CS@OVA-13 and CS@OVA-65), induced significantly higher secretion of tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) compared with the negative control. In human whole blood, CS@OVA-13 and CS@OVA-65 were phagocytosed with a significantly higher ratio by granulocytes and monocytes, leading to the higher secretion of TNF-α, IL-1β and IL-8, and a larger extent of platelet activation than CS@HSA-10 and CS@HSA-57, respectively.

Recruitment of endogenous mesenchymal stem cells (MSCs) has become an attractive strategy for in situ tissue regeneration. However, it is of great importance to endow an implant with a specific affinity to MSCs, for many types of cells such as immune cells and fibroblasts can also be recruited. It has been demonstrated that E7 peptides have a specific affinity to MSCs, but their selectivity for MSCs when co-cultured with other cells, especially in flow conditions, has rarely been investigated. In this study, E7-modified collagen substrates were prepared using sulfosuccinimidyl 4-(N-maleimidomethyl) cyclohexane-1-carboxylate (sulfo-SMCC) as the coupling agent. The results of X-ray photoelectron spectroscopy (XPS) and quartz crystal microbalance (QCM) proved that the densities of the immobilized E7 peptides could be modulated by changing the amounts of sulfo-SMCC. The results of cell adhesion rate, adhesion area and adhesion force demonstrated that the immobilization of E7 peptides led to a significant enhancement of the adhesion of bone marrow-derived MSCs (BMSCs) compared to RAW264.7 cells and NIH3T3 cells. The selective adhesion was verified by co-culturing BMSCs with RAW264.7 cells and NIH3T3 cells, which indicated that higher proportions of BMSCs were adhered on the E7-immobilized substrates. By mimicking in vivo flow circumstances, the selective capture of BMSCs by the E7-modified substrates was revealed by a flow model. All these results suggest that E7 immobilization might be a promising strategy for an implant to achieve a better regeneration outcome by enhancing the affinity to the recruited MSCs.

Due to the poor self-repair capabilities of articular cartilage, chondral or osteochondral injuries are difficult to be recovered. In this study, an N-cadherin mimetic peptide sequence HAVDIGGGC (HAV) was conjugated to direct cell–cell interactions, and an aggrecanase-1 cleavable peptide sequence CRDTEGE-ARGSVIDRC (ACpep) was used to crosslink hyperbranched PEG-based multi-acrylate polymer (HBPEG) with cysteamine-modified chondroitin sulfate (Cys-CS), obtaining an aggrecanase-1 responsively degradable and HAV-conjugated hydrogel ((HAV-HBPEG)-CS-ACpep). A HBPEG-CS-ACpep hydrogel without the HAV motif was also prepared. The two hydrogels exhibited similar equilibrium swelling ratios, elastic moduli and pore sizes after lyophilization, indicating the negligible influence of conjugated HAV on the crosslinking networks and mechanical properties of the hydrogels. After being degraded in PBS, aggrecanase-1 (ADAMTS4) and trypsin, the HBPEG-CS-ACpep hydrogel exhibited significantly decreased elastic moduli with a much lower value when incubated in enzyme solutions. The two hydrogels could maintain the viability of encapsulated bone marrow-derived mesenchymal stem cells (BMSCs), and the (HAV-HBPEG)-CS-ACpep hydrogel better promoted the cell–cell interactions. After being implanted into osteochondral defects in rabbits for 18 weeks, the two cell-laden hydrogel groups achieved better repair effects than the blank control group. Moreover, hyaline cartilage was formed in the (HAV-HBPEG)-CS-ACpep/BMSCs hydrogel group, while a hybrid of hyaline cartilage and fibrocartilage was found in the HBPEG-CS-ACpep/BMSCs hydrogel group.

Bacterial infection is a major obstacle to the wound healing process. The hydrogel dressings with a simpler structure and good antibacterial and wound healing performance are appealing for clinical application. Herein, a robust hydrogel was synthesized from acrylamide (AM), acrylic acid (AA) and N,N′-methylene diacrylamide (MBA) via a redox initiating polymerization. The polymerization conditions were optimized to obtain the hydrogel with minimum unreacted monomers, which were 0.25% and 0.12% for AM and AA, respectively. The hydrogel had good mechanical strength, and could effectively resist damage by external forces and maintain a good macroscopic shape. It showed large water uptake capacity, and could post load a wide range of molecules via hydrogen bonding and electrostatic interaction. Loading of antibiotic doxycycline (DOX) enabled the hydrogel with good antibacterial activity against both Gram-positive bacteria and Gram-negative bacteria in vitro and in vivo. In a rat model of methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect wound, the DOX-loaded hydrogel showed good therapeutic effect. It could significantly promote the wound closure, increased the collagen coverage area, down-regulate the expressions of pro-inflammatory TNF-α and IL-1β factors, and up-regulate the expressions of anti-inflammatory IL-4 factor and CD31 neovascularization factor.

Cancer chemotherapy can be hindered by drug resistance which leads to lower drug efficiency. Here, we have developed a drug delivery system that tethers doxorubicin to the surface of gold nanorods via a pH-sensitive linkage (AuNRs@DOX), for a combined photothermal and chemical therapy for cancer. First, AuNRs@DOX is ingested by HepG2 liver cancer cells. After endocytosis, the acidic pH triggers the release of doxorubicin, which leads to chemotherapeutic effects. The gold nanorods are not only carriers of DOX, but also photothermal conversion agents. In the presence of an 808 nm near-infrared laser, AuNRs@DOX significantly enhance the cytotoxicity of doxorubicin via the photothermal effect, which induces elevated apoptosis of hepG2 cancer cells, leading to better therapeutic effects in vitro and in vivo., Highlights • Doxorubicin is tethered on AuNRs with a pH-triggered linkage. • AuNRs@DOX are ingested by cancer cells andrelease doxorubicin under acidic pH triggers. • AuNRs@DOX show excellent combinational chemo- and photothermal therapy effect.

Selective adhesion and migration of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. In this study, a uniform cell-resisting layer of poly(ethylene glycol) (PEG) with a density gradient of azide groups was generated on a substrate by immobilizing two kinds of PEG molecules in a gradient manner. A density gradient of alkynyl-functionalized Val-Ala-Pro-Gly (VAPG) peptides was then prepared on the PEG layer via click chemistry. The VAPG density gradient was characterized by fluorescence imaging, revealing the gradual enhancement of the fluorescent intensity along the substrate direction. The adhesion and mobility of SMCs were selectively enhanced on the VAPG density gradient, leading to directional migration toward the higher peptide density (up to 84%). In contrast, the adhesion and mobility of FIBs were significantly weakened. The net displacement of SMCs also significantly increased compared with that on tissue culture polystyrene (TCPS) and that of FIBs on the gradient. The mitogen-activated protein kinase (MAPK) signaling pathways related to cell migration were studied, showing higher expressions of functional proteins from SMCs on the VAPG-modified surface in a density-dependent manner. For the first time the selective adhesion and directional migration of SMCs over FIBs was achieved by an elaborative design of a gradient surface, leading to a new insight in design of novel vascular regenerative materials. Statement of Significance Selective cell adhesion and migration guided by regenerative biomaterials are extremely important for the regeneration of targeted tissues, which can avoid the drawbacks of incorrect and uncontrolled responses of tissue cells to implants. For example, selectivity of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. Herein we prepare a uniform cell-repelling layer, on which SMCs-selective Val-Ala-Pro-Gly (VAPG) peptides are immobilized in a continuous manner. Selective adhesion and enhanced and directional migration of SMCs over FIBs are achieved by the interplay of cell-repelling layer and gradient SMCs-selective VAPG peptides, paving a new way for the design of novel vascular grafts with enhanced biological performance.

Rapid and complete vascularization of the porous orbital implants after enucleation is vital for reducing postoperative complications, such as exposure and infection. In this study, the porous hydroxyapatite (pHA) scaffolds modified with the mesoporous bioactive glass with and without adding copper (MBG, Cu-MBG) were prepared by sol-gel technique and followed by evaporation induced self-assembly (EISA) process. The macro-/microstructure analysis of the modified scaffolds (i.e., MBG/pHA, Cu-MBG/pHA) showed highly interconnected macropores, and unique mesoporous structures in the pore wall with higher surface area. A primary angiogenic test in a panniculus carnosus muscle model in rabbit indicated that the Cu-MBG coating was significantly beneficial for the vascularization in the porous architecture of the scaffolds in the early stage. These results suggest that the Cu-MBG modification provides a simple and effective strategy to endow favorable biological performances with pHA implants and greater potential for future application in orbit reconstruction.

Although great strides have been made in medical technology, low back/neck pain and intervertebral disc degeneration initiated from disc degenerative disease remains a clinical challenge. Within the field of regenerative medicine therapy, we have sought to improve the biomechanical transformation of spinal fusion procedures conducted using biodegradable porous implants. Specifically, we have focused on developing mechanically strong bioceramic cages for spinal fusion and functional recovery. Herein, we fabricated the akermanite (AKE) ceramic-based porous cages using low-melting bioactive glass (BG) and 3D printing technology. The osteogenic cell adhesion on the cages was evaluated in vitro, and the spinal fusion was tested in the intervertebral disc trauma model. The results indicated that incorporation of 15% or 30% BG into AKE (i.e., AKE/BG15 and AKE/BG30) could enhance the compressive strength of bioceramic cages by 2- or 5-fold higher than the pure AKE cages (AKE/BG0). In comparison with porous β-tricalcium phosphate cages, the surface of AKE/BG15 and AKE/BG30 cages greatly promoted the growth and alkaline phosphatase expression of osteogenic cells. Histological and biomechanical analysis showed that the AKE/BG15 and AKE/BG30 readily stimulated the new bone tissue growth and improved the spinal biomechanics recovery. In the AKE/BG15 and AKE/BG30 cage groups, 4-6 of the rabbits demonstrated a successful fusion. In contrast, only 0-1 of the initial seeded AKE/BG0 and tricalcium phosphate cages resulted in fusion at 12 weeks post-operatively. In summary, the akermanite-based cages showed an increased bone regenerative effect within an intervertebral disc trauma model, and thus, provided a promising candidate for improving spinal fusion surgery.

Excessive reactive oxygen species (ROS) generated after myocardial infarction (MI) result in the oxidative injury in myocardium. Implantation of antioxidant biomaterials, without the use of any type of drugs, is very appealing for clinical translation, leading to the great demand of novel biomaterials with high efficiency of ROS elimination. In this study, a segmented polyurethane (PFTU) with a high density of ROS-scavenging backbone units is synthesized by the reaction of poly(thioketal) dithiol (PTK) and poly(propylene fumarate) diol (PPF) (soft segments), thioketal diamine (chain extender), and 1,6-hexamethylene diisocyanate (HDI). Its chemical structure is verified by gel permeation chromatography (GPC), 1 H nuclear magnetic resonance (1 H NMR) spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. The electrospun composite PFTU/gelatin (PFTU/Gt) fibrous patches show good antioxidation capacity and ROS-responsive degradation in vitro. Implantation of the PFTU/gelatin patches on the heart tissue surface in MI rats consistently decreases the ROS level, membrane peroxidation, and cell apoptosis at the earlier stage, which are not observed in the non-ROS-responsive polyurethane patch. Inflammation and fibrosis are also reduced in the PFTU/gelatin-treated hearts, resulting in the reduced left ventricular remodeling and better cardiac functions postimplantation for 28 d.

Natural extracellular matrix governs cells providing biomechanical and biofunctional outstanding properties, despite being porous and mostly made of soft materials. Among organs, specific tissues present specialized macro-architectures. For instance, hepatic lobules present radial organization, while vascular sinusoids are branched from vertical veins, providing specific biofunctional features. Therefore, it is imperative to mimic such structures while modeling tissues. So far, there is limited capability of coupling oriented macro-structures with interconnected micro-channels in programmable long-range vertical and radial sequential orientations. Herein, a three-directional ice crystal elongation (3DICE) system is presented to code geometries in cryogels. Using 3DICE, guided ice crystals growth templates vertical and radial pores through bulky cryogels. Translucent isotropic and anisotropic architectures of radial or vertical pores are fabricated with tunable mechanical response. Furthermore, 3D combinations of vertical and radial pore orientations are coded at the centimeter scale. Cell morphological response to macro-architectures is demonstrated. The formation of endothelial segments, CYP450 activity, and osteopontin expression, as liver fibrosis biomarkers, present direct response and specific cellular organization within radial, linear, and random architectures. These results unlock the potential of ice-templating demonstrating the relevance of macro-architectures to model tissues, and broad possibilities for drug testing, tissue engineering, and regenerative medicine., The authors are grateful for the Portuguese Foundation for Science and Technology (FCT) distinction attributed to R. F. Canadas (SFRH/ BD/92565/2013), and to J. M. Oliveira (IF/00423/2012, IF/01285/ 2015). R. F. Canadas is also thankful to FCT, Fundo Europeu de Desenvolvimento Regional (FEDER), and Programa Operacional Competitividade e Internacionalizaç˜ao (POCI) for funding the B-Liver Project (PTDC/EMD-EMD/29139/2017). The authors are also thankful to FCT for supporting the project Hierarchitech (M-ERA-NET/0001/2014) and for the funds provided under the 3 BioMeD project (JICAM/0001/2017). The authors acknowledge that this material and collaboration is based in part upon work supported by Luso-American Development Foundation (FLAD), 2016/CON15/CAN6). U. Demirci is also grateful for the Canary Center at Stanford for Cancer Early Detection Seed Award. The authors are also grateful for the support provided by Diana Bicho and Nicolas Cristini on scaffold characterization and cell culture, respectively.

Hyaluronic acid (HA)-based hydrogels have applied widely for biomedical applications due to its biocompatibility and biodegradability. However, the use of initiators or crosslinkers during the hydrogel formation may cause cytotoxicity and thereby impair the biocompatibility. Inspired by the crosslinking mechanism of fibrin gel, a novel HA-based hydrogel was developed via the in situ supramolecular assembly based on knob-hole interactions between fibrinogen and knob-grafted HA (knob-g-HA) in this study. The knob-grafted HA was synthesized by coupling knob peptides (GPRPAAC, a mimic peptide of fibrin knob A) to HA via Michael addition. Then the translucent fibrinogen/knob-g-HA hydrogels were prepared by simply mixing the solutions of knob-g-HA and fibrinogen at the knob/hole ratio of 1.2. The rheological behaviors of the fibrinogen/knob-g-HA hydrogels with the fibrinogen concentrations of 50, 100 and 200 mg/mL were evaluated, and it was found that the dynamic storage moduli (G′) were higher than the loss moduli (G″) over the whole frequency range for all the groups. The SEM results showed that fibrinogen/knob-g-HA hydrogels presented the heterogeneous mesh-like structures which were different from the honeycomb-like structures of fibrinogen/MA-HA hydrogels. Correspondingly, a higher swelling ratio was obtained in the groups of fibrinogen/knob-g-HA hydrogel. Finally, the cytocompatibility of fibrinogen/knob-g-HA hydrogels was proved by live/dead stainings and MTT assays in the 293T cells encapsulation test. All these results highlight the biological potential of the fibrinogen/knob-g-HA hydrogels for 3D cellular engineering., Graphical abstract Image 1, Highlights • Inspired by fibrin gel, a fibrinogen/knob-g-hyaluronic acid hydrogel was fabricated via “knob”-“hole” specific interaction. • The hydrogel showing good cytocompatibility was prepared under physiological condition without adding enzyme or crosslinker. • The “knob” - “hole” interaction gives it potential to prepare a hydrogel with good cytocompatibility in a mild and fast manner.

Nanoparticles (NPs) can have profound effects on cell biology. However, the potential adverse effects of gold nanoparticles (AuNPs) with different surface chirality and structures have not been elucidated. In this study, monolayers of poly(acryloyl- l ( d )-valine ( l ( d )-PAV) chiral molecules were anchored on the surfaces of gold nanocubes (AuNCs) and nanooctahedras (AuNOs), respectively. The l -PAV-AuNCs and d -PAV-AuNCs, or the l -PAV-AuNOs and d -PAV-AuNOs, had identical physicochemical properties in terms of size, morphology and ligand density except of the reverse molecular chirality on the particle surfaces, respectively. The l -PAV capped AuNCs and AuNOs exhibited larger cytotoxicity to A549 cells than the D-PAV coated ones, and the PAV-AuNOs had larger cytotoxicity than PAV-AuNCs when being capped with the same type of enantiomers, respectively. The cytotoxicity was positively correlated with the cellular uptake amount, and thereby the production of intracellular reactive oxygen species (ROS). Statement of Significance • Gold nanoparticles with different structure and surface chirality are fabricated. • The structure and surface chirality at the nanoscale can influence cytotoxicity and genotoxicity. • A new perspective on designing nanoparticles for drug delivery, bioimaging and diagnosis.

Aligned fiber scaffolds can mimic the parallel aligned fibrils in the extracellular matrix (ECM) of bones, and thus regulate many cellular behaviors. The aligned scaffolds are usually prepared by a microplate micropatterned method, freeze casting, evaporation, slip casting, ice-templating, plain weaving, and fiber forming techniques. In this study, the melt spinning technology, which has the advantages of a higher spinning speed, solvent-free processing and readily scalable production, was used to prepare poly(l-lactide) (PLLA) melt spun fibers with an average diameter of 70.3 ± 11.4 μm. The fibers were further bonded by 5% PLLA tetrahydrofuran solution to prepare PLLA spun fiber-aligned scaffolds. Collagen and chitosan molecules were coated onto the fibers/into the scaffolds to obtain multiple biochemical and surface aligned topography cues, respectively. The collagen or chitosan-coated PLLA aligned scaffolds could effectively improve the viability, adhesion, length and migration behaviors of osteoblasts in vitro. In particular, the collagen coated aligned scaffold had the largest cell length and the fastest migration rate, with a preferential direction along the fibers. This type of scaffold provides a versatile substrate to control cell behaviors, having great potential for bone regeneration.

The extensive development and application of engineered nanoparticles (NPs) in various fields worldwide have been subjected to increasing concern due to their potential hazards to human health and the environment. Therefore, a simple, economical, and effective method for suppressing the toxicity of metal-based nanomaterials is needed. In this study, glutaraldehyde-crosslinked chitosan nanoparticles (CS NPs) were prepared and further modified with lysine (Ly-CS), glutamic acid (Glu-CS), or sodium borohydride reduction (R-CS), and used to suppress cytotoxicity induced by copper oxide NPs (CuO NPs) through chelation with intracellularly released copper ions. All three kinds of CS NPs had similar sizes of ∼100 nm in a dry state and ∼200 nm in cell culture medium, as determined by scanning electron microscopy, transmission electron microscopy, and dynamic light scattering. The chelating efficiency of different CS NPs followed the order Ly-CS > Glu-CS > R-CS. The CS NPs showed minimal or no toxicity to three different cell lines (HepG2, A549, and RAW264.7 cells) at 100 μg mL−1 with similar cell internalization and exocytosis processes. Comparatively, RAW264.7 cells exhibited higher endocytosis and exocytosis rates, as revealed by flow cytometry and confocal laser scanning microscopy. CS NPs were found as agglomerates inside A549 cells and RAW264.7 cells, with the amount of agglomerates inside RAW264.7 cells decreasing significantly with prolonged incubation. All three CS NPs, especially Ly-CS and Glu-CS NPs, efficiently suppressed the cytotoxicity induced by CuO NPs, and reduced the intracellular level of reactive oxygen species.