Search

In situ-forming hydrogels present a promising approach for minimally invasive cell transplantation and tissue regeneration. Among prospective materials, hyaluronic acid (HyA) has displayed great potential, owing to its inherent biocompatibility, biodegradation, and ease of chemical modification. However, current studies in the literature use a broad range of HyA macromer molecular weights (MWs) from

Human pluripotent stem cells harbor an unlimited capacity to generate therapeutically relevant cells for applications in regenerative medicine. However, to utilize these cells in the clinic, scalable culture systems that activate defined receptors and signaling pathways to sustain stem cell self-renewal are required; and synthetic materials offer considerable promise to meet these needs. De novo development of materials that target novel pathways has been stymied by a limited understanding of critical receptor interactions maintaining pluripotency. Here, we identify peptide agonists for the human pluripotent stem cell (hPSC) laminin receptor and pluripotency regulator, α6-integrin, through unbiased, library-based panning strategies. Biophysical characterization of adhesion suggests that identified peptides bind hPSCs through α6-integrin with sub-μM dissociation constants similar to laminin. By harnessing a high-throughput microculture platform, we developed predictive guidelines for presenting these integrin-targeting peptides alongside canonical binding motifs at optimal stoichiometries to generate nascent culture surfaces. Finally, when presented as self-assembled monolayers, predicted peptide combinations supported hPSC expansion, highlighting how unbiased screens can accelerate the discovery of targeted biomaterials.

Volumetric muscle loss (VML) injuries are characterized by a degree of tissue loss that exceeds the endogenous regenerative capacity of muscle, resulting in permanent structural and functional deficits. Such injuries are a consequence of trauma, as well as a host of congenital and acquired diseases and disorders. Despite significant preclinical research with diverse biomaterials, as well as early clinical studies with implantation of decellularized extracellular matrices, there are still significant barriers to more complete restoration of muscle form and function following repair of VML injuries. In fact, identification of novel biomaterials with more advantageous regenerative profiles is a critical limitation to the development of improved therapeutics. As a first step in this direction, we evaluated a novel semisynthetic hyaluronic acid-based (HyA) hydrogel that embodies material features more favorable for robust muscle regeneration. This HyA-based hydrogel is composed of an acrylate-modified HyA (AcHyA) macromer, an AcHyA macromer conjugated with the bsp-RGD(15) peptide sequence to enhance cell adhesion, a high-molecular-weight heparin to sequester growth factors, and a matrix metalloproteinase-cleavable cross-linker to allow for cell-dependent remodeling. In a well-established, clinically relevant rat tibialis anterior VML injury model, we report observations of robust functional recovery, accompanied by volume reconstitution, muscle regeneration, and native-like vascularization following implantation of the HyA-based hydrogel at the site of injury. These findings have important implications for the development and clinical application of the improved biomaterials that will be required for stable and complete functional recovery from diverse VML injuries.

The decrease in contractility in myocardium adjacent (border zone; BZ) to a myocardial infarction (MI) is correlated with an increase in reactive oxygen species (ROS). We hypothesized that injection of a thermoresponsive hydrogel, with ROS scavenging properties, into the MI would decrease ROS and improve BZ function. Fourteen sheep underwent antero-apical MI. Seven sheep had a comb-like copolymer synthesized from N-isopropyl acrylamide (NIPAAm) and 1500 MW methoxy poly(ethylene glycol) methacrylate, (NIPAAm-PEG1500), injected (20 × 0.5 mL) into the MI zone 40 min after MI (MI + NIPAAm-PEG1500) and seven sheep were MI controls. Cardiac MRI was performed 2 weeks before and 6 weeks after MI + NIPAAm-PEG1500. BZ wall thickness at end systole was significantly higher for MI + NIPAAm-PEG1500 (12.32 ± 0.51 mm/m2 MI + NIPAAm-PEG1500 vs. 9.88 ± 0.30 MI; p = .023). Demembranated muscle force development for BZ myocardium 6 weeks after MI was significantly higher for MI + NIPAAm-PEG1500 (67.67 ± 2.61 mN/m2 MI + NIPAAm-PEG1500 vs. 40.53 ± 1.04 MI; p < .0001) but not significantly different from remote myocardium or BZ or non-operated controls. Levels of ROS in BZ tissue were significantly lower in the MI + NIPAAm-PEG1500 treatment group (hydroxyl p = .0031; superoxide p = .0182). We conclude that infarct injection of the NIPAAm-PEG1500 hydrogel with ROS scavenging properties decreased ROS and improved contractile protein function in the border zone 6 weeks after MI.

Cardiac tissues are able to adjust their contractile behavior to adapt to the local mechanical environment. Nonuniformity of the native tissue mechanical properties contributes to the development of heart dysfunctions, yet the current in vitro cardiac tissue models often fail to recapitulate the mechanical nonuniformity. To address this issue, a 3D cardiac microtissue model was developed with engineered mechanical nonuniformity, enabled by 3D-printed hybrid matrices composed of fibers with different diameters. When escalating the complexity of tissue mechanical environment, cardiac microtissues started to develop maladaptive hyper-contractile phenotypes, demonstrated in both contractile motion analysis and force-power analysis. This novel hybrid system could potentially facilitate the establishment of “pathologically-inspired” cardiac microtissue model for deeper understanding of heart pathology due to nonuniformity of the tissue mechanical environment.

Human induced pluripotent stem cell (hiPSC) derived angiogenesis models present a unique opportunity for patient-specific platforms to study the complex process of angiogenesis and the endothelial cell response to biomaterial and biophysical changes in a defined microenvironment . We present a refined method for differentiating hiPSCs into a CD31 + endothelial cell population (hiPSC-ECs) using a single basal medium from pluripotency to the final stage of differentiation. This protocol produces endothelial cells that are functionally competent in assays following purification . Subsequently, an in vitro angiogenesis model was developed by encapsulating the hiPSC-ECs into a tunable, growth factor sequestering hyaluronic acid (HyA) matrix where they formed stable, capillary-like networks that responded to environmental stimuli. Perfusion of the networks was demonstrated using fluorescent beads in a microfluidic device designed to study angiogenesis. The combination of hiPSC-ECs, bioinspired hydrogel, and the microfluidic platform creates a unique testbed for rapidly assessing the performance of angiogenic biomaterials.

The survival of a biomaterial or tissue engineered construct is mainly hampered by the deficient microcirculation in its core, and limited nutrients and oxygen availability to the implanted or colonizing host cells. Aiming to address these issues, we herein propose bioresponsive gellan gum (GG) hydrogels that are biodegradable by metalloproteinase 1 (MMP-1) and enable endothelial cells adhesion and proliferation. GG is chemically functionalized with divinyl sulfone (DVS) and then biofunctionalized with thiol cell-adhesive peptides (T1 or C16) to confer GG endothelial cell biorecognition cues. Biodegradable hydrogels are then formed by Michael type addition of GGDVS or/and peptide-functionalized GGDVS with a dithiol peptide crosslinker sensitive to MMP-1. The mechanical properties (6 to 5580 Pa), swelling (17 to 11), MMP-1-driven degradation (up to 70%), and molecules diffusion coefficients of hydrogels are tuned by increasing the polymer amount and crosslinking density. Human umbilical cord vein endothelial cells depict a polarized elongated morphology when encapsulated within T1-containing hydrogels, in contrast to the round morphology observed in C16-containing hydrogels. Cell organization is favored as early as 1 d of cell culture within the T1-modified hydrogels with higher concentration of peptide, while cell proliferation is higher in T1-modified hydrogels with higher modulus. In conclusion, biodegradable and bioresponsive GGDVS hydrogels are promising endothelial cell responsive materials that can be used for vascularization strategies., This work was supported in part by the Heart Lung and Blood Institute of the National Institutes of Health (USA)R01HL096525 (K.E.H.), The Jan Fandrianto and Selfia Halim Endowed Professorship in Engineering (KEH) and FCT grant SFRH/BD/78025/2011 (LdS). The authors would also like to acknowledge Alessandra Zonari for FRAP analysis, Luca Gasperini for Cell Profiler software analysis, and Andreia Carvalho for the support on the experimental assays during the manuscript review process., info:eu-repo/semantics/publishedVersion

We have generated a bioinspired tunable system of hyaluronic acid (HyA)-based hydrogels for Matrix-Assisted Cell Transplantation (MACT). With this material, we have independently evaluated matrix parameters such as adhesion peptide density, mechanical properties, and growth factor sequestering capacity, to engineer an environment that imbues donor cells with a milieu that promotes survival and engraftment with host tissues after transplantation. Using a versatile population of Sca-1(+)/CD45(-) cardiac progenitor cells (CPCs), we demonstrated that the addition of heparin in the HyA hydrogels was necessary to coordinate the presentation of TGFβ1 and to support the trophic functions of the CPCs via endothelial cell differentiation and vascular like tubular network formation. Presentation of exogenous TGFβ1 by binding with heparin improved differentiated CPC function by sequestering additional endogenously-produced angiogenic factors. Finally, we demonstrated that TGFβ1 and heparin-containing HyA hydrogels can promote CPC survival when implanted subcutaneously into murine hind-limbs and encouraged their participation in the ensuing neovascular response, which included blood vessels that had anastomosed with the host's blood vessels.

A human in vitro cardiac tissue model would be a significant advancement for understanding, studying, and developing new strategies for treating cardiac arrhythmias and related cardiovascular diseases. We developed an in vitro model of three-dimensional (3D) human cardiac tissue by populating synthetic filamentous matrices with cardiomyocytes derived from healthy wild-type volunteer (WT) and patient-specific long QT syndrome type 3 (LQT3) induced pluripotent stem cells (iPS-CMs) to mimic the condensed and aligned human ventricular myocardium. Using such a highly controllable cardiac model, we studied the contractility malfunctions associated with the electrophysiological consequences of LQT3 and their response to a panel of drugs. By varying the stiffness of filamentous matrices, LQT3 iPS-CMs exhibited different level of contractility abnormality and susceptibility to drug-induced cardiotoxicity.

Intramyocardial hydrogel injection is an innovative and promising treatment for myocardial infarction (MI) and has recently entered clinical trials. By providing mechanical support to the ventricular wall, hydrogel injectate may act to preserve cardiac function and slow the remodeling process that leads to heart failure. However, improved outcomes will likely depend on the use of hydrogels specifically designed for this unique application, and better understanding of the mechanisms affected by the intervention. In this work, we present the first large animal study achieving functional and geometrical improvements in treating MI using a relatively stiff, fully synthetic hydrogel designed for intramyocardial injection. In addition, the renin-angiotensin system coincided with the mechanical effects of hydrogel injection and attenuated left ventricular remodeling, even after significant hydrogel degradation had occurred in vivo. These results may inspire further optimization of hydrogel materials used in intramyocardial hydrogel injection therapy and a better description of physiologic pathways affected by its implementation to facilitate successful clinical translation.

The avidin-biotin system is a highly specific reaction that has been used in a wide range of biomedical applications, including surface modification and cell patterning. We systematically examined a number of avidin derivatives as the basis for a simple and cost effective tissue culture polystyrene substrate surface modification for human stem cell culture. Non-specific adhesion between human mesenchymal stem cells and various avidin derivatives, media conditions, and subsequent biotinylation reactions was quantified. We observed significant non-specific cell adhesion to avidin and strepthavidin, indicating that previous observations using this system may be artifactual. Seeding of cells in serum free media, blocking with bovine-serum albumin, and the use of the avidin derivative Neutravidin were all necessary for elimination of background adhesion. Neutravidin conjugated with biotinylated bsp-RGD(15) peptide provided the most robust cell adhesion, as well as the greatest increase in cell adhesion over background levels.

Multivalent conjugates (MVCs) (conjugation of multiple proteins to a linear polymer chain) are powerful for improving the bioactivity and pharmacokinetics of a bioactive molecule. Since this effect is highly dependent upon the valency of the conjugated proteins, it is imperative to have a technique for analysis of the conjugation ratio. Studies of MVCs have used size exclusion chromatography-multiangle light scattering (SEC-MALS), which allows for the separate and individual analysis of the protein and biopolymer components based on their specific refractive index increment and UV extinction coefficient constants to determine the number of proteins bound per biopolymer molecule. In this work, we have applied traditional branching analysis to the SEC-MALS data, with the primary assumption that the polymer backbone can be used as the linear counterpart. We demonstrated good agreement between the branching values and the valency determined by traditional analysis, demonstrating that branching analysis can be used as an alternative technique to approximate the valency of MVCs. The branching analysis method also provides a more complete picture of the distribution of the measured values, provides important branching information about the molecules, and lowers the cost and complexity of the characterization. However, since MVC molecules are both conjugate molecules and branched molecules, the most powerful approach to their characterization would be to use both traditional multivalent conjugate analysis and branching analysis in conjunction.

© 2016 Elsevier Ltd. A critical design parameter for the function of synthetic extracellular matrices is to synchronize the gradual cell-mediated degradation of the matrix with the endogenous secretion of natural extracellular matrix (ECM) (e.g., creeping substitution). In hyaluronic acid (HyA)-based hydrogel matrices, we have investigated the effects of peptide crosslinkers with different matrix metalloproteinases (MMP) sensitivities on network degradation and neovascularization in vivo. The HyA hydrogel matrices consisted of cell adhesive peptides, heparin for both the presentation of exogenous and sequestration of endogenously synthesized growth factors, and MMP cleavable peptide linkages (i.e., QPQGLAK, GPLGMHGK, and GPLGLSLGK). Sca1+/CD45-/CD34+/CD44+ cardiac progenitor cells (CPCs) cultured in the matrices with the slowly degradable QPQGLAK hydrogels supported the highest production of MMP-2, MMP-9, MMP-13, VEGF165, and a range of angiogenesis related proteins. Hydrogels with QPQGLAK crosslinks supported prolonged retention of these proteins via heparin within the matrix, stimulating rapid vascular development, and anastomosis with the host vasculature when implanted in the murine hindlimb.

Anti-VEGF drugs that are used in conjunction with laser ablation to treat patients with diabetic retinopathy suffer from short half-lives in the vitreous of the eye resulting in the need for frequent intravitreal injections. To improve the intravitreal half-life of anti-VEGF drugs, such as the VEGF decoy receptor sFlt-1, we developed multivalent bioconjugates of sFlt-1 grafted to linear hyaluronic acid (HyA) chains termed mvsFlt. Using size exclusion chromatography with multiangle light scattering (SEC-MALS), SDS-PAGE, and dynamic light scattering (DLS), we characterized the mvsFlt with a focus on the molecular weight contribution of protein and HyA components to the overall bioconjugate size. We found that mvsFlt activity was independent of HyA conjugation using a sandwich ELISA and in vitro angiogenesis assays including cell survival, migration and tube formation. Using an in vitro model of the vitreous with crosslinked HyA gels, we demonstrated that larger mvsFlt bioconjugates showed slowed release and mobility in these hydrogels compared to low molecular weight mvsFlt and unconjugated sFlt-1. Finally, we used an enzyme specific to sFlt-1 to show that conjugation to HyA shields sFlt-1 from protein degradation. Taken together, our findings suggest that mvsFlt bioconjugates retain VEGF binding affinity, shield sFlt-1 from enzymatic degradation, and their movement in hydrogel networks (in vitro model of the vitreous) is controlled by both bioconjugate size and hydrogel network mesh size. These results suggest that a strategy of multivalent conjugation could substantially improve drug residence time in the eye and potentially improve therapeutics for the treatment of diabetic retinopathy.

Cardiovascular disease is the leading cause of death worldwide. Achieving the next phase of potential treatment strategies and better prognostic tools will require a concerted effort from interdisciplinary fields. Biomaterials-based cardiac tissue models are revolutionizing the area of preclinical research and translational applications. The goal of in vitro cardiac tissue modeling is to create physiological functional models of the human myocardium, which is a difficult task due to the complex structure and function of the human heart. This review describes the advances made in area of in vitro cardiac models using biomaterials and bioinspired platforms. The field has progressed extensively in the past decade, and we envision its applications in the areas of drug screening, disease modeling, and precision medicine.

Stem cells are often cultured on substrates that present extracellular matrix (ECM) proteins; however, the heterogeneous and poorly defined nature of ECM proteins presents challenges both for basic biological investigation of cell-matrix investigations and translational applications of stem cells. Therefore, fully synthetic, defined materials conjugated with bioactive ligands, such as adhesive peptides, are preferable for stem cell biology and engineering. However, identifying novel ligands that engage cellular receptors can be challenging, and we have thus developed a high throughput approach to identify new adhesive ligands. We selected an unbiased bacterial peptide display library for the ability to bind adult neural stem cells (NSCs), and 44 bacterial clones expressing peptides were identified and found to bind to NSCs with high avidity. Of these clones, four contained RGD motifs commonly found in integrin binding domains, and three exhibited homology to ECM proteins. Three peptide clones were chosen for further analysis, and their synthetic analogs were adsorbed on tissue culture polystyrene (TCPS) or grafted onto an interpenetrating polymer network (IPN) for cell culture. These three peptides were found to support neural stem cell self-renewal in defined medium as well as multi-lineage differentiation. Therefore, bacterial peptide display offers unique advantages to isolate bioactive peptides from large, unbiased libraries for applications in biomaterials engineering.

Although natural biological matrices have demonstrated modest improvement in the survival of cells transplanted into the infarcted myocardium, these materials have not been amenable to systematic optimization and therefore have limited potential to treat postinfarct cardiac injuries. Here we have developed tunable bioactive semi-interpenetrating polymer network (sIPN) hydrogels with matrix metalloproteinase (MMP) labile crosslinkers to be used as an assistive microenvironment for transplantation of bone marrow-derived mesenchymal stem cells (BMSCs) into the infarcted myocardium. Injectable sIPN hydrogels were designed with a range of mechanical and biological properties that yielded material-dependent BMSC proliferation in vitro. Five groups were evaluated to treat myocardial infarction (MI) in adult mice: saline injection; green fluorescent protein (GFP)(+)-BMSCs delivered in saline; a sIPN matrix; a sIPN + GFP(+)-BMSCs; and Matrigel™ + GFP(+)-BMSCs. Injection of cells alone created a transient improvement in LV function that declined over time, and the synthetic hydrogel without cells resulted in the highest LV function at 6 weeks. Donor GFP-positive cells were detected after matrix-enhanced transplantation, but not without matrix support. Biomimetic sIPN hydrogel matrices succeeded both in mechanically supporting the injured myocardium and modestly enhancing donor cell survival. These matrices provide a foundation for systematic development of “pro-survival” microenvironments, and improvement in the long-term results of cardiac stem cell transplantation therapies. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2010.

The dimensional stability and rheological properties of a series of comb-like copolymers of N-isopropyl acrylamide (NIPAAm) and methoxy poly(ethylene glycol) methacrylate (mPEGMA), poly(NIPAAm-co-mPEGMA), with varying poly(ethylene glycol) (PEG) graft densities and molecular weights were studied. The thermoresponsive character of the copolymer solutions was investigated by kinetic and equilibrium swelling, as well as by static and dynamic mechanical analysis. Surface response mapping was employed to target particular compositions and concentrations with excellent dimensional stability and a relatively large change in dynamic mechanical properties upon thermoreversible gelation. The mechanical characteristics of the gels depended strongly upon concentration of total polymer and less so upon copolymer ratio. Increased PEG graft density was shown to slow the deswelling rate and increase the equilibrium water content of the gels. Upon gelation at sol concentrations of 1-20 wt.% the materials underwent no deswelling or syneresis and maintained stable gels with a large elastic regime and high yield strain (i.e. elastic and soft but tough), even within the Pascal range of complex shear moduli. These materials are unique in that they maintained a physiologically useful lower critical solution temperature (approximately 33 degrees C), despite having a high PEG content. Copolymers with a high PEG content and low polymer fraction were conveniently transparent in the gel phase, allowing visualization of cellular activity without disrupting the microenvironment. Mesenchymal stem cells showed good viability and proliferation in three-dimensional culture within the gels, despite the lack of ligand incorporation to promote cellular interaction. Multi-component matrices can be created through simple mixing of copolymer solutions and peptide-conjugated linear polymers and proteins to produce combinatorial microenvironments with the potential for use in cell biology, tissue engineering and medical applications.

Enzymatically degradable semi-interpenetrating polymer networks (edsIPNs) were explored for their biocompatibility and ability to promote new scleral tissue growth, as a means of reinforcing the posterior wall of the eye. The edsIPNs comprised thermoresponsive poly(N-isopropylacrylamide-co-acrylic acid), customizable peptide crosslinkers cleavable by matrix metalloproteinases, and interpenetrating linear poly(acrylic acid)-graft-peptide chains to engage with cell surface receptors. Rheological studies revealed an increase in stiffness at body temperature; the complex shear modulus |G*| was 14.13 +/- 6.13 Pa at 22 degrees C and 63.18 +/- 12.24 Pa at 37 degrees C, compatible with injection at room temperature. Primary chick scleral fibroblasts and chondrocytes cultured on edsIPN increased by 15.1- and 11.1-fold, respectively, over 11 days; both exhibited delayed onset of exponential growth compared with the cells plated on tissue culture polystyrene. The edsIPN was delivered by retrobulbar injection (100 microL) to nine 2-week-old chicks to assess biocompatibility in vivo. Ocular axial dimensions were assessed using A-scan ultrasonography over 28 days, after which eyes were processed for histological analysis. Although edsIPN injections did not affect the rate of ocular elongation, the outer fibrous sclera showed significant thickening. The demonstration that injectable biomimetic edsIPNs stimulate scleral fibrous tissue growth represents proof-of-principle for a novel approach for scleral reinforcement and a potential therapy for high myopia.

A number of techniques currently exist that allow researchers to generate spatially resolved patterns of chemistry and topography on the nanometer length scale. Both chemically and topographically nanopatterned surfaces can be generated to more accurately mimic the natural extracellular environment. Chemically patterned surfaces can also be used to study tightly controlled and highly specific cell-cell and cell-substrate interactions or to create increasingly densely packed biosensors. From a biological standpoint, these methods enable fabrication of elaborate interfaces to mechanistically study the effects of cell adhesion ligand density, spacing, clustering, and spatial distribution on cell fate and function. The most commonly used nanopatterning techniques in the biomaterials arena are reviewed here, including scanning probe, electron beam, colloidal, and imprint lithographies, critically examining the resolution available and the scalability of the technique for generating the number of surfaces necessary for statistically relevant cell culture studies.

Macrophage attachment and activation to implanted materials is crucial in determining the extent of acute and chronic inflammation, and biomaterials degradation. In an effort to improve implant performance, considerable attention has centered on altering material surface chemistry to modulate macrophage behavior. In this work, the influence of the modulus of a material on the behavior of model macrophages (i.e., human promonocytic THP-1 cells) was investigated. We synthesized interpenetrating polymer network (IPN) coatings with varying moduli to test the hypothesis that lower moduli surfaces attenuate THP-1 cell attachment and activation. The surface chemistry and moduli of the IPN coatings were characterized using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. THP-1 cells preferentially attached to stiffer coatings of identical surface chemistry, confirming that fewer macrophages attach to lower moduli surfaces. The secretion of human TNF-alpha, IL-10, IL-8 and IL-1beta from THP-1 cells attached to the IPNs was measured to assess the concentration of both pro- and anti-inflammatory cytokines. The global amount of TNF-alpha released did not vary for IPN surfaces of different moduli; however, the amount of the pro-inflammatory cytokine IL-8 released demonstrated a biphasic response, where lower (approx. 1.4 kPa) and very high (approx. 348 kPa) moduli IPN surfaces attenuated IL-8 secretion. The different trends for TNF-alpha and IL-8 secretion highlight the complexity of the wound healing response, suggesting that there may not be a unique surface chemistry and substratum modulus combination that minimizes the pro-inflammatory cytokines produced by activated macrophages.

The signaling domain of Sonic hedgehog (Shh), a potent upstream regulator of cell fate that has been implicated in osteoblast differentiation from undifferenti- ated mesenchymal cells in its endogenous form, was inves- tigated in an immobilized form as a means for accelerating differentiation of uncommitted cells to the osteoblast phe- notype. A recombinant cysteine-modified N-terminal Shh (mShh) was synthesized, purified, and immobilized onto interpenetrating polymer network (IPN) surfaces also grafted with a bone sialoprotein-derived peptide contain- ing the Arg-Gly-Asp (RGD) sequence (bsp-RGD (15)), at calculated densities of 2.42 and 10 pmol/cm 2 , respectively. The mitogenic effect of mShh was dependent on the mode of presentation, as surfaces with immobilized mShh and bsp-RGD (15) had no effect on the growth rate of rat bone marrow-derived mesenchymal stem cells (BMSCs), while soluble mShh enhanced cell growth compared to similar surface without mShh supplementation. In conjunction with media supplemented with bone morphogenetic pro- tein-2 and -4, mShh and bsp-RGD (15)-grafted IPN surfa- ces enhanced the alkaline phosphatase activity of BMSCs compared with tissue culture polystyrene and bsp-RGD (15)-grafted IPN surfaces supplemented with soluble mShh, indicating enhanced osteoblast differentiation. The adhesive peptide bsp-RGD (15) was necessary for cell attachment and proliferation, as well as differentiation in response to immobilized mShh. The addition of immobi- lized Shh substantially improved the differentiation of uncommitted BMSCs to the osteoblast lineage, and there- fore warrants further testing in vivo to examine the effect of the stated biomimetic system on peri-implant bone for- mation and implant fixation. 2007 Wiley Periodicals, Inc. J Biomed Mater Res 83A: 1200-1208, 2007

Short-term osseointegration of orthopedic implants is critical for the long-term stability of the implant–bone interface. To improve initial implant stability, one strategy under consideration involves the presentation of adhesion ligands on the implant surface to stimulate bone regeneration in the peri-implant region. To assess the relative effects of implant surface chemistry and topography on osseointegration within the rat femoral ablation implant model, a nonfouling, enzymatically degradable interpenetrating polymer network (edIPN) of poly(AAm-co-EG/AAc) amenable to presenting the cell signaling domain Arg-Gly-Asp (RGD), was developed. Moderate enhancement of peri-implant bone formation was found after 28 days using the edIPN without peptide modification (p = 0.032). However, no data supported a benefit of peptide modification, as bone–implant contact, normalized bone volume and normalized fixation strength was equivalent or poorer than dual acid-etched (DAE) treated implants after 28 days. Surface topography was determined to be the dominant factor in modulating osseointegration, as DAE implants produced equivalent roughness-normalized fixation strength versus previously reported data on plasma-sprayed hydroxyapatite/tricalcium phosphate-coated implants (Barber et al., J Biomed Mater Res A, forthcoming). An ideal osseointegrated implant will require optimization of all three aforementioned parameters, and may take the form of biomolecule delivery from thin degradable polymer networks. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2007

Vascular endothelium plays an important role in preventing thrombogenesis. Bioactive molecules such as fibronectin-derived peptide Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) can be used to modify the surface of cardiovascular implants such as vascular grafts to promote endothelialization. Here we conjugated GRGDSP peptide to the nonfouling surface of an interpenetrating polymer network (IPN), and investigated the effects of the immobilized GRGDSP molecules on EC functions under static and flow conditions at well-defined GRGDSP surface densities (approximately 0 to 3 pmol/cm2). EC adhesion and spreading increased with GRGDSP surface density, reached a plateau at 1.5 pmol/cm2, and increased further beyond 2.8 pmol/cm2. Cell adhesion and spreading on GRGDSP induced two waves of extracellular signal-regulated kinase (ERK) activation, and 0.2 pmol/cm2 density of GRGDSP was sufficient to activate ERK. EC proliferation rate was not sensitive to GRGDSP surface density, suggesting that cell spreading at low-density of GRGDSP is sufficient to maintain EC proliferation. EC migration on lower-density GRGDSP-IPN surfaces was faster under static condition. With the increase of GRGDSP density, the speed and persistence of EC migration dropped quickly (0.2-0.8 pmol/cm2) and reached a plateau, followed by a slower and gradual decrease (1.5-3.0 pmol/cm2). These data suggest that the changes of EC functions were more sensitive to the increase of GRGDSP density at lower range. Under flow condition with shear stress at 12 dyn/cm2, EC migration was inhibited on GRGDSP-IPN surfaces, which may be attributed to the assembly of large focal adhesions induced by shear stress, suggesting a catch-bond characteristic for RGD-integrin binding. This study provides a rational base for surface engineering of cardiovascular implants.

Despite their preclinical promise, few recombinant growth factors have been fully developed into effective therapies, in part, due to the short interval of therapeutic activity after administration. To address this problem, we developed nanoscale polymer conjugates for multivalent presentation of therapeutic proteins that enhance the activation of targeted cellular responses. As an example of this technology, we conjugated multiple Sonic hedgehog (Shh) proteins onto individual hyaluronic acid biopolymers to generate multivalent protein clusters at defined ratios (i.e., valencies) that yield enhanced Shh pathway activation at equivalent concentrations relative to unconjugated Shh. In this study, we investigated whether these multivalent conjugates (mvShh) could be used to improve the therapeutic function of Shh. We found that a single treatment with mvShh significantly accelerated the closure of full-thickness wounds in diabetic (db/db) mice compared to either an equivalent dose of unconjugated Shh or the vehicle control. Furthermore, we identified specific indicators of wound healing in fibroblasts and endothelial cells (i.e., transcriptional activation and cell migration) that were activated by mvShh in vitro and at concentrations approximately an order of magnitude lower than the unconjugated Shh. Taken together, our findings suggest that mvShh conjugates exhibit greater potency to activate the Shh pathway, and this multivalency advantage improves its therapeutic effect to accelerate wound closure in a diabetic animal model. Our strategy of multivalent protein presentation using nanoscale polymer conjugates has the potential to make a significant impact on the development of protein-based therapies by improving their in vivo performance.

While electrospun fibers are of interest as scaffolds for tissue engineering applications, nonspecific surface interactions such as protein adsorption often prevent researchers from controlling the exact interactions between cells and the underlying material. In this study we prepared electrospun fibers from a polystyrene-based macroinitiator, which were then grafted with polymer brushes using surface-initiated atom transfer radical polymerization (SI-ATRP). These brush coatings incorporated a trimethylsilyl-protected PEG-alkyne monomer, allowing azide functional molecules to be covalently attached, while simultaneously reducing nonspecific protein adsorption on the fibers. Cells were able to attach and spread on fibrous substrates functionalized with a pendant RGD-containing peptide, while spreading was significantly reduced on nonfunctionalized fibers and those with the equivalent RGE control peptide. This effect was observed both in the presence and absence of serum in the culture media, indicating that protein adsorption on the fibers was minimal and cell adhesion within the fibrous scaffold was mediated almost entirely through the cell-adhesive RGD-containing peptide.

We demonstrate that a biomimetic polymer network is capable of affecting bone regeneration in vivo. Starting with a foundation consisting of an environmentally responsive poly(N-isopropylacrylamide-co-acrylic acid) hydrogel, we incorporated matrix metalloproteinase-13 (MMP-13) degradable crosslinkers and peptides containing integrin-binding domains (i.e., Arg-Gly-Asp) to create a biomimetic matrix designed to encourage osteoblast migration and proliferation. We independently tuned matrix stiffness and peptide concentration to generate a response surface model of osteoblast proliferation on different types of matrices. Osteoblast proliferation was significantly influenced by matrix stiffness (i.e., its complex modulus) and peptide concentration. When implanted in a rat femoral ablation model, these matrices induced bone regeneration only when protease degradable crosslinks were used to create the network. For the matrices with MMP-13 degradable crosslinkers, the bone formed had a trabecular-like structure and was distributed throughout the marrow space. Based on the correlated effects of matrix stiffness and ligand concentration, the response surface model will facilitate improvements in the regenerative capacity of these artificial extracellular matrices.

A simple fluorescence based characterization method was developed to assess ligand density on peptide-modified biomaterials. The method exploits the exquisite sensitivity of proteolysis for the purpose of liberating a fluorescently labeled probe fragment from an immobilized peptide. The released fragment can then be detected in solution using high-throughput fluorometry. In silico screening tools identified the enzyme chymotrypsin as a promising candidate for releasing a detectable probe fragment from the fluorescently labeled peptide, Ac-CGGNGEPRGDTYRAYK(FITC)GG-NH(2). After chymotrypsin digestion of the peptide in solution was first characterized using mass spectrometry and HPLC, a basic enzyme mediated release protocol was developed and implemented to generate peptide-binding isotherms on various peptide-modified biomaterials. The new method is sensitive, has good signal-to-noise ratio (S/N), and is easily standardized. Furthermore, the technique can be applied independent of material chemistry and geometry, making it a suitable alternative to radiolabeling for a wide range of biomaterial applications.

Thermoresponsive and injectable semi-interpenetrating polymer networks (sIPNs) containing a biospecific cell-adhesive signal and proteolytically degradable domains were developed as a synthetic equivalent of the extracellular matrix (ECM). The sIPNs synthesized define a modular hydrogel ECM where different properties of the matrix can be manipulated independently, thus creating a system where parametric analysis of the effect of hydrogel properties on cell proliferation and differentiation is possible. sIPNs composed of poly(N-isopropylacrylamide-co-acrylic acid) [p(NIPAAm-co-AAc)] and RGD-grafted poly(acrylic acid) linear chains [p(AAc)-g-RGD] were synthesized with peptide crosslinkers containing a matrix metalloproteinase-13 (MMP-13, collagenase-3) degradable domain. The lower critical solution temperature (LCST) of peptide-crosslinked p(NIPAAm-co-AAc) sIPNs was not influenced by the addition of either linear p(AAc) or peptide-modified p(AAc) chains ( approximately 34 degrees C) in PBS. Degradation of peptide-crosslinked hydrogels and sIPNs was enzyme specific and concentration dependent. Exposure of rat calvarial osteoblast (RCO) culture to the degradation products from the peptide-crosslinked hydrogels did not significantly affect cell viability. Migration of RCOs into the sIPNs was dependent upon the presence of both a cell-adhesive RGD peptide (Ac-CGGNGEPRGDTYRAY-NH2) and proteolytically-degradable crosslinks; however, there was greater dependence on the latter. The sIPNs synthesized are versatile materials for assessing cell fate in synthetic ECM constructs in vitro and tissue regeneration in vivo.

Concerns about the efficacy of ethanol disinfection for implanted biomaterials prompted investigation of an alternative sterilization process, ultraviolet irradiation, for terminal sterilization of N-isopropylacrylamide-based hydrogels containing biomimetic peptides. Ultraviolet irradiation is more easily applied on a laboratory scale than gamma irradiation or electron beam, two commercially utilized methods; thus, UVC irradiation was investigated as a low-cost sterilization procedure that might be performed in laboratories prior to in vivo studies. UVC irradiation at 400 muW/cm(2) for up to 15 h did not prevent growth of Escherichia coli within the hydrogels, while ethanol disinfection did prevent growth for the duration of the experiment (120 h). Furthermore, UVC irradiation caused progressive degradation of peptides containing the Arg-Gly-Arg (RGD) domain. UVC irradiation cannot be used as a terminal sterilization process for peptide-modified materials. The system used in this study is not intended to be adequate for evaluating the sterility of medical devices in accordance with current Good Manufacturing Practice (cGMP); however, it remains a useful, low-cost system for the preliminary evaluation of sterilization procedures in terms of their ability to eliminate pathogenic organisms while preserving the structure of biologically active molecules within in a laboratory setting. Ethanol treatment is still the preferred method for disinfection of bioactive materials containing peptides or UV-degradable groups.

The ability of monocytes to adhere, differentiate into macrophages, and fuse to form foreign body giant cells (FBGCs) on an implanted material surface is a critical step toward biomaterial degradation. Novel homogeneous surfaces were utilized to mediate adhesion. These surfaces consisted of N-(2 aminoethyl)-3-aminopropyltrimethoxysilane (EDS) and an interpenetrating polymer network (IPN) of polyacrylamide and poly(ethylene glycol). These surfaces were designed to control cell adhesion and morphology and mediate cell differentiation, activation, metabolic ability, and apoptosis, resulting in a reduced or controlled inflammatory response. The EDS surface promotes cell adhesion and the IPN minimizes protein adsorption and subsequent cell adhesion. Both surfaces had similar cellular adhesion rates at each respective time point. However, the adherent macrophage morphology was similar at 2 h and day 3, and at days 7 and 10 adherent macrophages on the EDS surface formed FBGCs (46% at day 7 and 40% at day 10). Adherent cells on the IPN surface did not form FBGCs but instead formed monocyte aggregates (73% of adherent cells formed aggregates at day 7 and 63% at day 10). It is indicated that the two surface chemistries differentially controlled monocyte differentiation into macrophages and subsequent macrophage fusion to form FBGCs.

The present study demonstrates increased early mechanical fixation of titanium implants coated with a new biomimetic apatite surface in a rat model. Male Sprague- Dawley rats received unilateral femoral medullary implants for periods of 1- 4 weeks. The strength of fixation of the implant to the host bone increased more rapidly in the group receiving apatite-treated implants compared with the control group as evidenced by the apatite group's 21-fold greater fixation strength at 1 week (p 0.009), 4-fold greater fixation strength at 2 weeks (p 0.041), and 2-fold greater fixation strength at 4 weeks (p 0.093) compared with the control. Fixation strength was correlated with bone-implant contact as determined from micro computed tomography assessment of the specimens (r 2 0.338, p 0.011 in the control group and r 2 0.543, p 0.001 in the apatite group). Furthermore, for a given amount of bone-implant contact, the fixation strength was higher in the apatite group than in the control group (p 0.011), suggesting that the bone formed a stronger bond to the apatite coating than to the titanium. This difference in bonding strength accounted for the difference in mechanical behavior. © 2004 Wiley Period- icals, Inc. J Biomed Mater Res 70A: 66 -73, 2004

Semi-interpenetrating polymer networks (semi-IPNs), comprised of poly(N-isopropylacrylamide-co-acrylic acid) (p(NIPAAm-co-AAc)) hydrogels and linear p(AAc) chains, were synthesized, and the effects of the p(AAc) chains on semi-IPN rheology were examined. Oscillatory shear rheometry studies were performed and the rheological data were analyzed as a function of temperature, frequency, and p(AAc) chain amount (weight average molecular weight (Mw) 4.5 x 10(5) g/mol). At 22 degrees C, the semi-IPNs, as well as control p(NIPAAm-co-AAc) hydrogels, demonstrated rheological data that were representative of soft, loosely cross-linked solids. Furthermore, only the highest p(AAc) chain amount tested affected the rigidity of the p(NIPAAm-co-AAc)-based semi-IPNs, as compared to the p(NIPAAm-co-AAc) hydrogels. At 37 degrees C, the complex shear moduli (G*) demonstrated by the p(NIPAAm-co-AAc)-based semi-IPNs were significantly greater than G* exhibited by the p(NIPAAm-co-AAc) hydrogels, and the semi-IPN G* values significantly increased with increasing p(AAc) chain amount. These results can be used to develop p(NIPAAm)-based semi-IPNs with tailored mechanical properties that may function as scaffolds in tissue engineering initiatives.

Interpenetrating polymer networks (IPNs) of poly(acrylamide-co-ethylene glycol/acrylic acid) (p(AAm-co-EG/AAc) applied to model surfaces prevent protein adsorption and cell adhesion. Subsequently, IPN surfaces functionalized with the RGD cell-binding domain from rat bone sialoprotein (BSP) modulated bone cell adhesion, proliferation, and matrix mineralization. The objective of this study was to utilize the same biomimetic modification strategy to produce functionally similar p(AAm-co-EG/AAc) IPNs on clinically relevant titanium surfaces. Contact angle goniometry and X-ray photoelectron spectroscopy (XPS) data were consistent with the presence of the intended surface modifications. Cellular response was gauged by challenging the surfaces with primary rat calvarial osteoblast (RCO) surfaces in serum-containing media. IPN modified titanium and negative control (RGE-IPN) surfaces inhibit cell adhesion and proliferation, while RGD-modified IPNs on titanium supported osteoblast attachment and spreading. Furthermore, the latter surfaces supported significant mineralization despite exhibiting lower levels of proliferation than positive control surfaces. These results suggest that with the appropriate optimization, this approach may be practical for surface engineering of osseous implants.

Osteogenic differentiation of human mesenchymal stem cells (hMSCs) is guided by various physical and biochemical factors. Among these factors, modulus (i.e., rigidiy) of the ECM has gained significant attention as a physical osteoinductive signal that can contribute to endochondral ossification of a cartilaginous skeletal template. However, MSCs also participate in intramembranous bone formation, which occurs de novo from within or on a more compliant tissue environment. To further understand the role of the matrix interactions in this process, we evaluated osteogenic differentiation of hMSCs cultured on low moduli (102, 390 or 970 Pa) poly(N-isopropylacrylamide) (p(NIPAAm)) based semi-interpenetrating networks (sIPN) modified with the integrin engaging peptide bsp-RGD(15) (0, 105 or 210 µM). Cell adhesion, proliferation, and osteogenic differentiation of hMSCs, as measured by alkaline phosphatase (ALP), runt-related transcription factor 2 (RUNX2), bone sialoprotein-2 (iBSP), and osteocalcien (OCN) protein expression, was highest on substrates with the highest modulus and peptide concentrations. However, within this range of substrate stiffness, many osteogenic cellular functions were enhanced by increasing either the modulus or the peptide density. These findings suggest that within a compliant and low modulus substrate, a high affinity adhesive ligand serves as a substitute for a rigid matrix to foster osteogenic differentiation.

Fluorescence microscopy can offer unique advantages for biomaterials characterization. Like spectroscopy or radioactivity, it can be used to quantify specific binding to surfaces, but it can also assess surface homogeneity at the micron scale or detect protein aggregation. To fully utilize the potential of this technique, there must be a way to calibrate the microscope in terms of the moles of a fluorophore per unit area. The method we propose involves the following steps: fluorescent labeling of erythrocytes and quantification of the label by flow cytometry; flattening of fluorescent erythrocytes for microscopic observation; imaging and digital analysis to relate the gray level intensities to the fluorophore density; and using this procedure to characterize a different, more easily obtainable, standard. The latter can be a 50% solution of Na fluorescein that yields a highly reproducible and uniform fluorescence. Concentrated fluorescein solution can also be used to correct images for the spatial nonuniformity of illumination and detection (shading correction). By applying this method to study the binding of IgG and fibrinogen to glass or amidated glass, we showed that protein adsorption to glass may result in protein aggregation that may affect the biological activity of the adsorbed protein.

To better understand the events involved in the generation of defined tissue architectures on biomaterials, we have examined the mechanism of attachment of human bone-derived cells (HBDC) to surfaces with patterned surface chemistry in vitro. Photolithography was used to generate alternating domains of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS). At 90 min after seeding, HBDC were localized preferentially to the EDS regions of the pattern. Using sera specifically depleted of adhesive glycoproteins, this spatial organization was found to be mediated by adsorption of vitronectin (Vn) from serum onto the EDS domains. In contrast, fibronectin (Fn) was unable to adsorb in the face of competition from other serum components. These results were confirmed by immunostaining, which also revealed that both Vn and Fn were able to adsorb to EDS and DMS regions when coated from pure solution, i.e., in the absence of competition. In this situation, each protein was able to mediate cell adhesion across a range of surface densities. Cell spreading was constrained on the EDS domains, as indicated by cell morphology and the lack of integrin receptor clustering and focal adhesion formation. This spatial constraint may have implications for the subsequent expression of differentiated function.

The density of Arg-Gly-Asp-containing peptides covalently grafted to solid materials has been shown to affect adhesion, spreading, and focal contact formation. The objective of this study was to examine the effect of ligand density on mineralization of the extracellular matrix deposited by osteoblasts. In particular, RGD-modified quartz surfaces with ligand densities varying over two orders (0.01–3.6 pmol/cm2) of magnitude were prepared to assess the long-term function of osteoblasts on peptide-derivatized surfaces. After 3 weeks in culture, surfaces modified with a 15 amino acid peptide (Ac-Cys-Gly-Gly-Asn-Gly-Glu-Pro-Arg-Gly-Asp-Thr-Tyr-Arg-Ala-Tyr-NH2) at a density ≥0.62 pmol/cm2 significantly (p < 0.05) enhanced mineralization compared with a RGD surface density of 0.01 pmol/cm2, RGE surfaces, or clean surfaces adsorbed with serum proteins. These results suggest that regulation of the surface density of adhesive ligands on biomaterial surfaces is a critical determinant in a strategy to alter the degree of extracellular matrix maturation in contact with solid surfaces (e.g., implants). Further studies are required to elucidate the intracellular signal transduction pathways that mediate long-term matrix mineralization through the initial engagement of these adhesive ligands. © 2000 John Wiley & Sons, Inc. J Biomed Mater Res, 52, 595–600, 2000.

Drug delivery devices have received considerable interest in the field of tissue engineering due to the advent of proteins that can induce proliferation and differentiation of various cells to form specific tissues and organs, for example, bone morphogenetic protein (BMP-2) for osteogenesis. In this work the delivery of a clinically relevant bioactive factor, recombinant human rhBMP-2, was tested in vivo in a rat ectopic bone induction assay. Contact radiography and radiomorphometry showed significantly more radiopacity (1798+/-183 mm2 versus. 784+/-570 mm2 radiopaque area/g scaffold) in the BMP scaffolds than controls (p < 0.002). De novo woven bone and abundant osteoid formation were confirmed from histological sections while controls contained minimal amounts of tissue. Histomorphometry revealed significantly more bone (124+/-93 mm2 versus 7+/-12 mm2) and osteoid (72+/-43 mm2 versus 20+/-21 mm2) in the BMP implants (p < 0.001). These scaffolds demonstrated the ability to deliver viable rhBMP-2 and to induce bone formation in an ectopic site.

Interpenetrating polymer networks (IPNs) were designed to resist materials fouling caused by non-specific protein adsorption, and indiscriminate cell or bacterial adhesion. These IPNs were thin adherent films (approximately 20 nm) comprised of acrylamide (AAm), ethylene glycol (EG), and acrylic acid (AA) grafted to either silicon waters or quartz substrates via photoinitiated free radical polymerization. These networks were further modified to promote specific cell adhesion by tethering bioactive groups such as peptides that mimic cell-binding domains found on extracellular matrix molecules. As a specific example of biomolecular surface engineering, peptides from the cell-binding domain of bone sialoprotein were tethered to a p(AAm-co-EG/AA) IPN to control cell behavior at the surface. The networks were characterized by contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy to convey information on IPN wettability, thickness, and chemistry. The surface characterization data supported the theory that the PEG/AA layer formed an IPN with the underlying p(AAm) network, and after graft modification of this IPN with diamino PEG (PEG(NH2)2), the PEG(NH2)2 chains were enriched at the surface. Rat calvarial osteoblasts attached to Arg-Gly-Asp (RGD) modified IPNs at levels significantly greater than on clean quartz, Arg-Gly-Glu (RGE) modified, or the PEG(NH2)2 modified IPN, with or without serum in the media. Cells maintained in media containing 15% fetal bovine serum (FBS) proliferated, exhibited nodule formation, and generated sheets of mineralized extracellular matrix (ECM) with the addition on beta-glycerophosphate to the media. Cell adhesion and mineralized ECM formation were specifically dependent on the peptide sequence present at the surface.

Adhesion, spreading, and focal contact formation of primary bone-derived cells on quartz surfaces grafted with a 15 amino acid peptide that contained a -RGD-(-Arg-Gly-Asp-) sequence unique to bone sialoprotein was investigated. The peptide surfaces were fabricated by using a heterbifunctional crosslinker, sulfosuccinimidyal 4-(N-maleimidomethyl)cyclohexane-1-carboxylate, to link the peptide to amine functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry and thickness of the overlayers. A radial flow apparatus was used to characterize cell detachment from peptide-grafted surfaces. After 20 min of cell incubation, the strength of cell adhesion was significantly (p < 0.05) higher on the -RGD- compared to -RGE- (control) surfaces. Furthermore, the mean area of cells contacting the -RGD- was significantly (p < 0.05) higher than -RGE- surfaces. Vinculin staining showed formation of small focal contact patches on the periphery of bone cells incubated for 2 h on the -RGD- surfaces; however, few or no focal contacts were formed by cells seeded on the -RGE-grafted surfaces. The methods of peptide immobilization utilized in this study can be applied to implants, biosensors, and diagnostic devices that require specificity in cell adhesion.

In recent years a central objective of tissue engineering has been understanding the interaction of cells with biomaterial surfaces. In this study we examined the protein adsorption events necessary to control the attachment and the subsequent spatial distribution of bone-derived cells exposed to chemically modified surfaces. Silane chemistry and photolithography techniques were used to create substrates with alternating regions of an aminosilane, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS), along side an alkylsilane, dimethyldichlorosilane (DMS), on quartz surfaces. Sera depleted of fibronectin (Fn), vitronectin (Vn), or both were used to determine if these proteins were necessary for the initial attachment and spatial distribution of bone-derived cells exposed to modified surfaces in vitro. The kinetics and mechanisms of the spatial distribution of cells were examined using light microscopy and digital image acquisition and subsequently were analyzed. Compared to complete serum, the use of serum depleted of fibronectin with vitronectin included had minimal effect on the cell attachment, spreading, and spatial distribution on the EDS regions of the surface. However, the use of serum depleted of vitronectin with or without fibronectin included resulted in greatly reduced cell attachment and spreading. Thus the presence of vitronectin was required for the attachment, spreading, and spatial distribution of bone-derived cells exposed to EDS/DMS-patterned surfaces.

Stem cell differentiation is regulated by complex repertoires of signaling ligands which often use multivalent interactions, where multiple ligands tethered to one entity interact with multiple cellular receptors to yield oligomeric complexes. One such ligand is Sonic hedgehog (Shh), whose posttranslational lipid modifications and assembly into multimers enhance its biological potency, potentially through receptor clustering. Investigations of Shh typically utilize recombinant, monomeric protein, and thus the impact of multivalency on ligand potency is unexplored. Among its many activities, Shh is required for ventralization of the midbrain and forebrain and is therefore critical for the development of midbrain dopaminergic (mDA) and forebrain gamma-aminobutyric acid (GABA) inhibitory neurons. We have designed multivalent biomaterials presenting Shh in defined spatial arrangements and investigated the role of Shh valency in ventral specification of human embryonic stem cells (hESCs) into these therapeutically relevant cell types. Multivalent Shh conjugates with optimal valencies, compared to the monomeric Shh, increased the percentages of neurons belonging to mDA or forebrain GABAergic fates from 33% to 60% or 52% to 86%, respectively. Thus, multivalent Shh bioconjugates can enhance neuronal lineage commitment of pluripotent stem cells and thereby facilitate efficient derivation of neurons that could be used to treat Parkinson's and epilepsy patients.

We have developed a synthetic polymer interface for the long-term self-renewal of human embryonic stem cells (hESCs) in defined media. We successfully cultured hESCs on hydrogel interfaces of aminopropylmethacrylamide (APMAAm) for over 20 passages in chemically-defined mTeSR™ 1 media and demonstrated pluripotency of multiple hESC lines with immunostaining and quantitative RT-PCR studies. Results for hESC proliferation and pluripotency markers were both qualitatively and quantitatively similar to cells cultured on Matrigel™ -coated substrates. Mechanistically, it was resolved that bovine serum albumin (BSA) in the mTeSR™ 1 media was critical for cell adhesion on APMAAm hydrogel interfaces. This study uniquely identified a robust long-term culture surface for the self-renewal of hESCs without the use of biologic coatings (e.g., peptides, proteins, or Matrigel™) in completely chemically-defined media that employed practical culturing techniques amenable to clinical-scale cell expansion.

The dissolution of titanium in simulated interstitial electrolyte (SIE), human serum in SIE (serum/SIE) and 8.0 mM ethylenediaminetetraacetic acid (EDTA) in SIE (EDTA/SIE) was measured in vitro. Titanium fibre samples were immersed in these solutions and maintained at 37°C, 10% O2, 5% CO2 and 97±3% relative humidity for 0–5000 h. The concentration of titanium released was quantified using electrothermal atomic absorption spectroscopy. Changes in oxide stoichiometry were determined by Auger electron spectroscopy after processing and immersion in the test solutions. The oxide became nearly stoichiometric TiO2 after immersion, suggesting equilibration of the surface with the solutions. Solution ligands enhanced the magnitude of dissolution, with EDTA>serum/SIE>SIE. The dissolution kinetics were empirically fitted by a two-phase logarithmic relationship. The first phase of dissolution (t 300 h) by mass diffusion. The dissolution kinetics were similar for the EDTA/SIE and serum/SIE solutions, indicating that the mechanisms of dissolution for each solution may be the same.

Peptide-functionalized materials show promise in controlling stem cell behavior by mimicking cell-matrix interactions. Supported lipid bilayers are an excellent platform for displaying peptides due to their ease of fabrication and low non-specific interactions with cells. In this paper, we report on the behavior of adult hippocampal neural stem cells (NSCs) on phospholipid bilayers functionalized with different RGD-containing peptides: either GGGNGEPRGDTYRAY ('bsp-RGD(15)') or GRGDSP. Fluid supported bilayers were prepared on glass surfaces by adsorption and fusion of small lipid vesicles incorporating synthetic peptide amphiphiles. NSCs adhered to bilayers with either GRGDSP or bsp-RGD(15) peptide. After 5 days in culture, NSCs formed neurosphere-like aggregates on GRGDSP bilayers, whereas on bsp-RGD(15) bilayers a large fraction of single adhered cells were observed, comparable to monolayer growth seen on laminin controls. NSCs retained their ability to differentiate into neurons and astrocytes on both peptide surfaces. This work illustrates the utility of supported bilayers in displaying peptide ligands and demonstrates that RGD peptides may be useful in synthetic culture systems for stem cells.

The effects of a model physiologic solution on the surface chemistry and oxidation kinetics of titanium were determined. Auger electron (AES) and X-ray photoelectron (XPS) spectroscopies were used to identify changes in oxide stoichiometry, adsorbed surface species, and oxide thickness as a function of exposure to a balanced electrolyte with 8.0 mM ethylenediaminetetraacetic acid (EDTA). Prior to immersion, the oxide on the processed films was identified as TiO2 with two types of hydroxyl (OH) groups adsorbed. The chemistry of the mean surface region changed as a function of immersion: an increase in OH groups and P (nonelemental) was detected. The oxidation kinetics did not follow a unique theoretical relationship. However, the data can be explained on the basis of a limiting oxide thickness (lL). It is proposed that electric-field-assisted transport of metal ions into the oxide lattice is the rate-determining step for oxide growth. The model predicts lL ∼ 7.5 nm with subsequent oxide growth of less than 0.02 nm/day, which compares well with the oxide growth of samples exposed to human serum and retrieved titanium implants.