Search

Bio-oil derived from fast pyrolysis of oil palm empty fruit bunch (EFB) was catalytically reformed inside a stainless steel multichannel tubular reactor using steam and air as reforming agents. The catalyst used, denoted as Fe/AC, was an iron catalyst loaded on the coconut shell-derived activated carbon (AC) prepared by a new approach of impregnating iron from an aqueous solution onto the AC in a stepwise manner. Results indicate that a stepwise impregnation was able to minimise the agglomeration of iron particles on AC surface, allowing high loading of iron onto the AC without severely affecting Fe dispersion and catalyst pore properties. The highly reducible, highly efficient catalyst produced in this study was able to lower the concentration of tar in producer gas to lower than 100 mg/Nm3. The best composition of the burnable product gas was obtained with iron loading of 15 wt%, reaction temperature of 800 °C, steam-to-carbon molar ratio (S/C) of 1.0 and air equivalence ratio (ER) of 0.1, with gas composition of 33.5% H2, 21.0% CO, 14.0% CH4, 18.8% CO2 and 1% C2 hydrocarbons and a cold gas efficiency of 78.5%. [ABSTRACT FROM AUTHOR]

Sewage sludge, the inevitable by-product of municipal wastewater treatment plant operation, is a key issue in many countries due to its increasing volume and the impacts associated with its disposal. Thermochemical processing offers a new way of managing sewage sludge, not only by providing effective volume reduction, but also enabling transformation of carbon-rich organic fraction into valuable energy and fuel. Owing to some unique properties, sewage sludge differs from other solid fuels such as lignocellulosic biomass and coal, making its thermochemical conversion application somewhat complicated and challenging. This paper reviews the options of converting sewage sludge to energy and fuel via three main thermochemical conversion processes namely pyrolysis, gasification and combustion. The fundamental aspects of sewage sludge and its behaviour in each of thermochemical process are summarised. The challenges in adopting thermochemical conversion technology in sewage sludge management are addressed, and various alternative approaches deserving further consideration, such as the incorporation of pre-processing and co-utilisation, are discussed. [ABSTRACT FROM AUTHOR]

• Char structure was investigated via characterization of its extraction and residue. • Effects of pellet sizes on char structure were weakened by temperatures. • Polymerisation of extract is account for the structural difference of pellet chars. • Aromatisation degree of pellet char is related to its surface-area-to-volume ratio. Char structure can reflect the pyrolysis characteristics and affect the efficiency of gasification and combustion processes, while biomass pellet size and shape are critical for the heat and mass transfer, which in turn influence greatly char structure. The aim of this study is to experimentally study and compare the effect of aspect ratio (diameter/length) on char structure during the pyrolysis of sawdust pellet. Cylindrical sawdust pellets with similar masses and volumes but different diameters (6, 8, 12, 16 mm) were pyrolysed at various temperatures. The chars were separated into two phases (liquid extraction, solid residue) via microwave-assisted extraction. Experimental results show that the pellet with a low aspect ratio had a large char yield because of intra-particle volatile-char interaction especially at low temperature, while there was an optimum aspect ratio due to the change of residence time. The pellet with a high aspect ratio had an intense polymerisation, resulting in the formation of fused aromatic rings in char and residue. By increasing aspect ratio, there was a lowest surface area. This means that less heat entered from surface, and low thermal conductivity caused a slow decomposition. Due to large heat and mass transfer residence, more aromatic molecules with small weight formed in extracts of char, especially at high temperature. Besides, an increase in temperature weakened the differences in structural features of the pellet char caused by different aspect ratios. [ABSTRACT FROM AUTHOR]