Search

In a biomass gasification process, condensation of inorganic species can cause problems such as corrosion and deposition on the downstream equipment. In this work, in order to investigate the condensation of inorganics during the gas cooling step of the biomass gasification system, both experimental and modelling studies were conducted. Experiments were performed on a pilot-scale steam/oxygen blown fluidized bed gasification facility. A CO 2 cooled probe was located at the head of a filter to condense inorganic species. Five thermocouples were used to monitor the probe temperature profile. Deposits on the probe were characterized using scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) to analyze the elemental composition of deposits. A process model based on the local chemical and phase equilibriums was developed using software SimuSage to predict both release and condensation of inorganics. A customized thermodynamic database extracted from the FactSage 7.1 was used during model calculations. Two cases including with and without addition of bed material were calculated. Results show that the identified elemental compositions of deposit under different gas cooling temperatures reasonably agree with the elemental compositions predicted by model calculations. This demonstrates that the established model and the customized thermodynamic data are valid. A large amount of carbon is identified in the deposit of low temperature probe sections, which may come from the condensed tar. Additionally, a temperature window is found, where melts are formed during gas cooling. [ABSTRACT FROM AUTHOR]

Highlights: [•] An equation was developed for pressure drop prediction with shrinking effect. [•] Graphical representations of correlation constants were introduced. [•] This would provide a guide to select pellet size and designing a grate. [ABSTRACT FROM AUTHOR]

Pretreatment of biomass becomes more and more important due to the large scale application of biomass having low energy density. In this paper, steam exploded biomass pellets (Black pellets) and unpretreated biomass pellets (Gray pellets) were gasified with air and steam at an updraft HTAG (High Temperature Agent Gasification) unit. Decomposition characteristics of pellets were first analyzed with TGA (thermo gravimetric analysis). Early decomposition of hemicellulose and cellulose were seen with Black pellets around 241 °C and 367 °C respectively. Introducing CO2 led comparatively high mass loss rate with Black pellets. Gasification of Black pellets resulted in syngas with high CO and hydrocarbon contents while Gasification of Gray pellets resulted in high H2 content of syngas. LHV (lower heating value) of syngas was high around 7.3 MJ/Nm3 and 10.6 MJ/Nm3 with air gasification and steam gasification respectively. Even with significantly low syngas temperature with gasification of Black pellets, only slightly high total tar content was seen compared to that of Gray pellets gasification. Phenolic compounds dominated the tar composition. In general, steam gasification of Black pellets seems to be more feasible if syngas with high energy value is desired. If higher H2 yield is preferred, gasification of unpretreated pellets likely to be more attractive. [ABSTRACT FROM AUTHOR]