Search

Metal organic framework UiO‐66 is studied as an adaptable heterogeneous catalyst for glucose conversion. UiO‐66 was modified by; i) partial linker substitution, ii) particle size modulation and iii) linker defects. We studied the effect of crystallinity and functional groups on the glucose conversion and product yields. The main products are: i) fructose from the isomerisation of glucose, ii) mannose from the epimerisation of glucose and iii) 5‐hydroxymethyl furfural from the dehydration of fructose. We found that defective and nano crystalline UiO‐66 catalyst performs best for isomerisation. When 50 % of the linkers of UiO‐66 are replaced by a sulfonate‐containing linker, the catalyst shows higher isomerisation activity than other UiO‐66 catalysts. Naphthalene‐dicarboxylate linkers were introduced to induce hydrophobicity and this catalyst further increased isomerisation activity showing 31 % fructose selectivity. Finally, the promising catalysts were tested in a flow reactor and a bifunctional mixed linker catalyst possessing both hydrophobic and acidic functional groups is shown to be stable in a time‐on‐stream study. [ABSTRACT FROM AUTHOR]

Abstract: Heterogeneous catalysts are desired for the conversion of glucose, the most abundant sugar in renewable biomass, but presently their synthesis requires highly toxic chemicals with long synthesis times. We report the conversion of glucose into fructose and 5‐hydroxymethylfurfural on a heterogeneous catalyst that is stable and selective and operates in the most environmentally benign solvent, water. We used a bifunctional solid with Lewis and Brønsted acid sites by partially replacing the organic linker of the zirconium organic framework UiO‐66 with 2‐monosulfo‐benzene‐1,4‐dicarboxylate. This catalyst showed high product selectivity (90 %) to 5‐hydroxymethylfurfural and fructose at 140 °C in water after a reaction time of 3 h. It was recyclable and showed only a minor loss in activity after the third recycle, offering a realistic solution for the bottleneck glucose isomerization reaction for scale‐up and industrial application of biomass utilization. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass, a cheap and plentiful resource, could play a key role in the production of sustainable chemicals. The simple sugars contained in the renewable lignocellulosic biomass can be converted into commercially valuable products such as 5-hydroxymethyl furfural (HMF). A platform molecule, HMF can be transformed into numerous chemical products with potential applications in a wide variety of industries. Of the hexoses contained in the lignocellulosic biomass, the successful production of HMF from glucose has been a challenge. Various heterogeneous catalysts have been proposed over the last decade, ranging from zeolites to metal organic frameworks. The reaction conditions vary in the reports in the literature, which makes it difficult to compare catalysts reported in different studies. In addition, the slight variations in the synthesis of the same material in different laboratories may affect the activity results, because the selectivity towards desired products in this transformation strongly depends on the nature of the active sites. This poses another difficulty for the comparison of different reports. Furthermore, over the last decade the new catalytic systems proposed have increased profoundly. In this article, we summarize the heterogeneous catalysts: Metal Organic Frameworks (MOFs), zeolites and conventional supported catalysts, that have been reported in the recent literature and provide an overview of the observed catalytic activity, in order to provide a comparison. [ABSTRACT FROM AUTHOR]

The metal–organic framework MIL-101(Cr) is known as a solid–acid catalyst for the solution conversion of biomass-derived glucose to 5-hydroxymethyl furfural (5-HMF). We study the substitution of Cr3+ by Fe3+ and Sc3+ in the MIL-101 structure in order to prepare more environmentally benign catalysts. MIL-101(Fe) can be prepared, and the inclusion of Sc is possible at low levels (10% of Fe replaced). On extended synthesis times the polymorphic MIL-88B structure instead forms.Increasing the amount of Sc also only yields MIL-88B, even at short crystallisation times. The MIL-88B structure is unstable under hydrothermal conditions, but in dimethylsulfoxide solvent, it provides 5-HMF from glucose as the major product. The optimum material is a bimetallic (Fe,Sc) form of MIL-88B, which provides ~70% conversion of glucose with 35% selectivity towards 5-HMF after 3 hours at 140 °C: this offers high conversion compared to other heterogeneous catalysts reported in the same solvent. [ABSTRACT FROM AUTHOR]