Search

Metal organic framework UiO‐66 is studied as an adaptable heterogeneous catalyst for glucose conversion. UiO‐66 was modified by; i) partial linker substitution, ii) particle size modulation and iii) linker defects. We studied the effect of crystallinity and functional groups on the glucose conversion and product yields. The main products are: i) fructose from the isomerisation of glucose, ii) mannose from the epimerisation of glucose and iii) 5‐hydroxymethyl furfural from the dehydration of fructose. We found that defective and nano crystalline UiO‐66 catalyst performs best for isomerisation. When 50 % of the linkers of UiO‐66 are replaced by a sulfonate‐containing linker, the catalyst shows higher isomerisation activity than other UiO‐66 catalysts. Naphthalene‐dicarboxylate linkers were introduced to induce hydrophobicity and this catalyst further increased isomerisation activity showing 31 % fructose selectivity. Finally, the promising catalysts were tested in a flow reactor and a bifunctional mixed linker catalyst possessing both hydrophobic and acidic functional groups is shown to be stable in a time‐on‐stream study. [ABSTRACT FROM AUTHOR]

• Gallium and Tin can be doped in zeolite Y framework successfully. • Ga has similar activity to Sn in the reaction of glucose conversion to HMF. • Ga zeolite Y catalyst can be recycled and regenerated in DMSO. • Ga-Y zeolite gives fructose yield of 5% at 17 % glucose conversion and Sn-Y zeolite gives 17 % yield at 36 % conversion. This study demonstrates the use of gallium and tin modified Y zeolites as catalysts for the conversion of glucose into fructose, mannose and 5-Hydroxymethyl furfural. These catalysts can be synthesised via a simple and scalable procedure that uses commercially available Y zeolite. The catalysts were characterised by various techniques including elemental analysis, electron microscopy, nitrogen physisorption, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, solid state nuclear magnetic resonance spectroscopy and X-ray absorption near edge spectroscopy. It is found that tin containing Y zeolite generate a glucose conversion of 36 % and total product yield of 17 % in water. Meanwhile, gallium containing Y zeolite shows an HMF yield of 33 % when reactions were conducted in DMSO. The recyclability of tin and gallium containing Y zeolites were studied in DMSO and the activities of both materials were shown to remain stable. Furthermore, the spent catalysts can be regenerated via calcination in air. [ABSTRACT FROM AUTHOR]

Herein, Zeolitic imidazolate framework-8 (ZIF-8) is considered as an easy and cheap to prepare alternative catalyst for the isomerization of glucose and production of 5-hydroxymethyl furfural (HMF). For the synthesis of the ZIF-8 catalysts two preparation methods were evaluated, being room temperature and hydrothermal synthesis at 140 °C. Of these, the hydrothermal synthesis method yields a material with exceptionally high surface area (1967 m2·g−1). As a catalyst, the ZIF-8 materials generated excellent fructose yields. Specifically, ZIF-8 prepared by hydrothermal synthesis yielded a fructose selectivity of 65% with a glucose conversion of 24% at 100 °C in aqueous reaction medium. However, this selectivity dropped dramatically when the reactions were repeated at higher temperatures (~140 °C). Interestingly, greater quantities of mannose were produced at higher temperatures too. The lack of strong Brønsted acidity in both ZIF-8 materials resulted in poor HMF yields. In order to improve HMF yields, reactions were performed at a lower pH of 1.0. At 140 °C the lower pH was found to drive the reaction towards HMF and double its yield. Despite the excellent performance of ZIF-8 catalysts in batch reactions, their activity did not translate well to the flow reactor over a continuous run of 8 h, which was operating with a residence time of 6 min. The activity of ZIF-8 halved in the flow reactor at 100 °C in ~3 h, which implies that the catalyst's stability was not maintained in the long run. [ABSTRACT FROM AUTHOR]

The metal–organic framework MIL-101(Cr) is known as a solid–acid catalyst for the solution conversion of biomass-derived glucose to 5-hydroxymethyl furfural (5-HMF). We study the substitution of Cr3+ by Fe3+ and Sc3+ in the MIL-101 structure in order to prepare more environmentally benign catalysts. MIL-101(Fe) can be prepared, and the inclusion of Sc is possible at low levels (10% of Fe replaced). On extended synthesis times the polymorphic MIL-88B structure instead forms.Increasing the amount of Sc also only yields MIL-88B, even at short crystallisation times. The MIL-88B structure is unstable under hydrothermal conditions, but in dimethylsulfoxide solvent, it provides 5-HMF from glucose as the major product. The optimum material is a bimetallic (Fe,Sc) form of MIL-88B, which provides ~70% conversion of glucose with 35% selectivity towards 5-HMF after 3 hours at 140 °C: this offers high conversion compared to other heterogeneous catalysts reported in the same solvent. [ABSTRACT FROM AUTHOR]