Search

Acetylation of softwoods has been largely investigated to increase the dimensional stability and biological resistance of wood. However, the knowledge of this technology has not been applied to tropical hardwood species up to date. The objective of this work was to study the effect of acetylation on nine tropical hardwood species, from forest plantations in Costa Rica, by applying acetic anhydride in three different treatment times (1 h, 2.5 h, 4 h), as well as to evaluate this by Fourier-Transform Infrared Spectroscopy (FTIR). Results showed that weight percentage gain (WPG) of wood varied from 2.2 to 16.8%, withVochysia ferrugineaspecies showing the highest WPG, andGmelina arboreaandTectona grandisspecies exhibiting the lowest WPGs. Tropical woods such asEnterolobium cyclocarpum,Hieronyma alchorneoidesandSamanea samanexhibited statistical differences among treatment times, whereas the rest of the species studied showed no significant differences. In general, the most effective acetylation time was 2.5 h for all the species. The ratio of intensity (RI) from the FTIR spectra was greater at the 1732 cm−1, 1372 cm−1and 1228 cm−1peaks for all tropical species, associated with lignin. A good correlation between the RI of those peaks and WPG was found; the same was also found between all RIs and each other. Meanwhile, RI associated to the hemicelluloses and lignin (1592 cm−1and 1034 cm−1peaks, respectively) showed no correlation with WPG, nor between each other or with the other RIs. Furthermore, it was suggested that RI at 1732 cm−1(associated to acetyl groups C=O) can be considered as a reliable indicator of the degree of acetylation for tropical hardwood species. Finally, it was observed that tropical hardwoods having more suitable anatomical features, like larger vessel diameter, higher ray width and frequency, and lesser deposits such as gums and tyloses in the vessels, resulted in significantly higher WPGs.

Torrefaction can increase the energy yield of biomass for better utilization in bioenergy, but chemical changes occur during the pretreatment process. Wood residues of Cupressus lusitanica, Dipteryx panamensis, Gmelina arborea, Tectona grandis, and Vochysia ferruginea were torrefied for three different time periods (8, 10, and 12 min) and three different temperatures (200, 225, and 250 °C). The mass loss, net calorific value, ash, volatiles, lignin, cellulose, extractives, and infrared spectra were evaluated. The results showed that the mass loss in torrefied biomass varied between 10% and 70%, ash content varied between 0.19 and 7.00%, and volatiles content varied between 63 and 85%. Net calorific value values varied between 17 and 23 MJ/kg, increasing with the increased torrefaction temperature. Cellulose varied between 49.85 and 67.57%. Lignin varied between 27.33 and 41.09%. The extractives varied between 3.70 and 16.86%. The change in the ratio of intensity (RI) for the bands identified using FTIR analyses showed that large changes occurred in hemicellulose components. The multivariate analysis showed that lignin, ash, extractives in hot water, volatiles, and mass loss were the variables that contributed most. The analysis of all these variables showed that torrefaction at 250 °C for 12 min presented the greatest biomass degradation. Torrefaction at 200 °C and 225 °C for 8, 10, and 12 min was optimal for thermal treatment of the biomass of these woody species.

La torrefaccion y peletizacion se han estudiado en la generacion de calor a partir de residuos lignocelulosicos, para incrementar las propiedades energeticas del material. El objetivo del presente trabajo fue torrefaccionar aserrin de Gmelina arborea y Dipteryx panamensis a 200 °C en tres tiempos: 0, 15 y 20 minutos. Con las biomasas obtenidas se fabricaron pellets de 6 mm de diametro y se evaluaron sus propiedades fisicas, el poder calorico, la densidad y la propiedad mecanica de resistencia a la compresion. Ambas especies presentaron caracteristicas fisicas similares con respecto al diametro (0.50 mm), longitud (21.50 mm) y porcentaje de absorcion de agua (6.00 %). El poder calorico aumento de 9,749 kJ·kg-1 en la biomasa sin torrefaccionar a 18,126 kJ·kg-1 en la biomasa torrefaccionada. Los pellets de D. panamesis presentaron mayor densidad y resistencia a la compresion que los de G. arborea . Con base en los resultados, la resistencia a la compresion del pellet disminuye cuando el tiempo de torrefaccion aumenta. Existe correlacion positiva entre la densidad de los pellets y la resistencia a la compresion. La especie D. panamensis presenta mejor comportamiento a la torrefaccion y peletizacion que la madera de G. arborea .