Search

Yersinia pestis is a Gram-negative bacterium that is the causative agent of plague and is widely recognized as a potential biological weapon. Due to the high fatality rate of plague when diagnosis is delayed, the development of rapid, sensitive, specific, and cost-effective methods is needed for its diagnosis. The Y. pestis low calcium response V (LcrV) protein has been identified as a potential microbial biomarker for the diagnosis of plague. In this paper, we present a highly sensitive, paper-based, vertical flow immunoassay (VFI) prototype for the detection of LcrV and the diagnosis of plague. An antigen-capture assay using monoclonal antibodies is employed to capture and detect the LcrV protein, using a colorimetric approach. In addition, the effect of miniaturizing the VFI device is explored based on two different sizes of VFI platforms, denoted as "large VFI" and "mini VFI." Also, a comparative analysis is performed between the VFI platform and a lateral flow immunoassay (LFI) platform to exhibit the improved assay sensitivity suitable for point-of-care (POC) diagnostics. The analytical sensitivity or limit of detection (LOD) in the mini VFI is approximately 0.025 ng/mL, that is, 10 times better than that of the large VFI platform or 80 times over a standard lateral flow configuration. The low LOD of the LcrV VFI appears to be highly suitable for testing clinical samples and potentially diagnosing plague at earlier time points. In addition, optimization of the gold nanoparticle (AuNP) concentration, nanomaterial plasmonic properties, and flow velocity analysis could improve the performance of the VFI. Furthermore, we developed automated image analysis software that shows potential for integrating the diagnostic system into a smartphone. These methods and findings demonstrate that the VFI platform is a highly sensitive device for detecting the LcrV and potentially many other biomarkers.

Francisella tularensis is the causative agent of tularemia, a zoonotic bacterial infection that is often fatal if not diagnosed and treated promptly. Natural infection in humans is relatively rare, yet persistence in animal reservoirs, arthropod vectors, and water sources combined with a low level of clinical recognition make tularemia a serious potential threat to public health in endemic areas. F. tularensis has also garnered attention as a potential bioterror threat, as widespread dissemination could have devastating consequences on a population. A low infectious dose combined with a wide range of symptoms and a short incubation period makes timely diagnosis of tularemia difficult. Current diagnostic techniques include bacterial culture of patient samples, PCR and serological assays, however, these techniques are time consuming and require technical expertise that may not be available at the point of care. In the event of an outbreak or exposure a more efficient diagnostic platform is needed. The lipopolysaccharide (LPS) component of the bacterial outer leaflet has been identified previously by our group as a potential diagnostic target. For this study, a library of ten monoclonal antibodies specific to F. tularensis LPS were produced and confirmed to be reactive with LPS from type A and type B strains. Antibody pairs were tested in an antigen-capture enzyme-linked immunosorbent assay (ELISA) and lateral flow immunoassay format to select the most sensitive pairings. The antigen-capture ELISA was then used to detect and quantify LPS in serum samples from tularemia patients for the first time to determine the viability of this molecule as a diagnostic target. In parallel, prototype lateral flow immunoassays were developed, and reactivity was assessed, demonstrating the potential utility of this assay as a rapid point-of-care test for diagnosis of tularemia.

Immunoglobulin G3 (IgG3) is the predominant IgG subclass elicited in response to polysaccharide antigens in mice. This specific subclass has been shown to crosslink its fragment crystallizable (Fc) regions following binding to multivalent polysaccharides. Crosslinking leads to increased affinity through avidity, which theoretically should lead to more effective protection against bacteria and yeast displaying capsular polysaccharides on their surface. To investigate this further we have analyzed the binding characteristics of 2 IgG monoclonal antibody (mAb) subclass families that bind to the capsular polysaccharide (CPS) of Burkholderia pseudomallei. The first subclass family originated from an IgG3 hybridoma cell line (3C5); the second family was generated from an IgG1 cell line (2A5). When the Fc region of the 3C5 IgG3 is removed by proteolytic cleavage, the resulting F(ab')2 fragments exhibit decreased affinity compared to the full-length mAb. Similarly, when the parent IgG3 mAb is subclass-switched to IgG1, IgG2b, and IgG2a, all of these subclasses exhibit decreased affinity. This decrease in affinity is not seen when the 2A5 IgG1 mAb is switched to an IgG2b or IgG2a, strongly suggesting the drop in affinity is related to the IgG3 Fc region.

Currently, the standard method for identifying biological agents of potential threats to national security and public health, such as pathogens, virus, and toxins, mainly rely on microbiological cultivation. This method is time-consuming and it requires sophisticated equipment and well-trained personnel, which are often unavailable in remote areas or at point-of-need. Therefore, an alternative rapid, simple, and sensitive method for detecting bio-threat agents is in crucial need. We report a paper-based Vertical Flow Immunoassay (VFI) device that can overcome these limitations. The VFI device utilizes a nanoporous nitrocellulose membrane encapsulated in a stainless steel filter holder. As the sample is pushed through the membrane, which is pre-functionalized with capture antibody, a sandwich assay is formed and colorimetric signal is generated to reflect the presence of target antigens. Through theoretical analyses of antigen-antibody binding process inside a porous membrane, we identified two critical factors – membrane pore size and sample flow rate that can be optimized to improve the assay sensitivity. Then, the effects were demonstrated through experimental studies using Burkholderia pseudomallei (the causative agent of melioidosis) as a model pathogen. The B. pseudomallei VFI was based on an immunoassay targeting the B. pseudomallei surface capsular polysaccharide (CPS). The experimental results agreed well with the theory showing that increasing the flow speed (up to 1.06 mm/s) and reducing the membrane pore size (down to 0.1 µm) could improve the sensitivity by at least 5 times. The VFI's limit-of-detection for CPS spiked in buffer solution was determined to be 0.02 ng/mL. The developed VFI shows great potential as a point-of-care tool for detection of bio-threat agents in a variety of clinical and resource-restricted conditions.

The CDC Tier 1 select agent Francisella tularensis is a small, Gram-negative bacterium and the causative agent of tularemia, a potentially life-threatening infection endemic in the United States, Europe and Asia. Currently, there is no licensed vaccine or rapid point-of-care diagnostic test for tularemia. The purpose of this research was to develop monoclonal antibodies (mAbs) specific to the F. tularensis surface-expressed lipopolysaccharide (LPS) for a potential use in a rapid diagnostic test. Our initial antigen capture ELISA was developed using murine IgG3 mAb 1A4. Due to the low sensitivity of the initial assay, IgG subclass switching, which is known to have an effect on the functional affinity of a mAb, was exploited for the purpose of enhancing assay sensitivity. The ELISA developed using the IgG1 or IgG2b mAbs from the subclass-switch family of 1A4 IgG3 yielded improved assay sensitivity. However, surface plasmon resonance (SPR) demonstrated that the functional affinity was decreased as a result of subclass switching. Further investigation using direct ELISA revealed the potential self-association of 1A4 IgG3, which could explain the higher functional affinity and higher assay background seen with this mAb. Additionally, the higher assay background was found to negatively affect assay sensitivity. Thus, enhancement of the assay sensitivity by subclass switching is likely due to the decrease in assay background, simply by avoiding the self-association of IgG3.

Point mutations in the human fibroblast growth factor (FGF) receptor 3 gene (Fgfr3) produce a constitutively active receptor, which disrupts chondrocyte differentiation in the growth plate and results in skeletal dysplasias with severe shortening of the limbs. Alternative splicing of the Fgfr3 transcript gives rise to two isoforms, IIIc and IIIb, which vary in their specificity for FGF ligands. We examined the expression of these FGFR3 isoforms in the bovine fetal rib growth plate to determine whether levels of FGFR3 expression are zone-related. Transcripts for both Fgfr3 isoforms are expressed in rib growth plate, with maximum expression in the hypertrophic region and the least expression in the reserve zone. Fgfr3 IIIc is the predominant isoform in the growth plate. Western-blot analysis revealed the presence of full-length FGFR3 (135kDa) for both isoforms in the reserve zone, a major 98kDa fragment in all zones and smaller fragments primarily in the hypertrophic zone. Immunostaining localized FGFR3 to the pericellular region of reserve chondrocytes and to the extracellular matrix in the hypertrophic zone. These results suggest that the transmembrane form of FGFR3 increasingly undergoes proteolytic cleavage towards the hypertrophic zone to produce an extracellular-domain fragment of FGFR3, which is present in large amounts in the matrix of hypertrophic cells. These findings suggest a proteolytic regulatory mechanism for FGFR3, whereby Fgfr3 fragments could control availability of FGF for the intact receptor, and by which proteolysis could inactivate the receptor.