Search

Activation of membrane receptors through clustering is a common mechanism found in various biological systems. Spatial proximity of receptors may be transduced across the membrane to initiate signaling pathways or alternatively be recognized by peripheral proteins or immune cells to trigger external effector functions. Here we show how specific immunoglobulin G (IgG) binding induces clustering of monomeric target molecules in lipid membranes through Fc- Fc interactions. We visualize and characterize the dynamic IgG oligomerization process and the molecular interactions involved using high-speed atomic force microscopy, single-molecule force spectroscopy, and quartz crystal microbalance experiments. We found that the Fc-Fc interaction strength is precisely tuned to be weak enough to prevent IgG oligomerization in solution at physiological titers, but enabling IgG oligomerization when Fabs additionally bind to their cognate surface epitopes, a mechanism that ultimately targets IgG-mediated effector functions such as classical complement activation to antigenic membranes.

Coronaviruses have repeatedly crossed species barriers to cause epidemics1. “Pan-coronavirus” antivirals targeting conserved viral components involved in coronavirus replication, such as the extensively glycosylated spike protein, can be designed. Here we show that the rationally engineered H84T-banana lectin (H84T-BanLec), which specifically recognizes high-mannose found on viral proteins but seldom on healthy human cells2, potently inhibits the highly virulent MERS-CoV, pandemic SARS-CoV-2 and its variants, and other human-pathogenic coronaviruses at nanomolar concentrations. MERS-CoV-infected human DPP4-transgenic mice treated by H84T-BanLec have significantly higher survival, lower viral burden, and reduced pulmonary damage. Similarly, prophylactic or therapeutic H84T-BanLec is effective against SARS-CoV-2 in hamsters. Importantly, intranasally and intraperitoneally administered H84T-BanLec are comparably effective. Time-of-drug-addition assay shows that H84T-BanLec targets virus entry. Real-time structural analysis with high-speed atomic force microscopy depicts multi-molecular associations of H84T-BanLec dimers with the SARS-CoV-2 spike trimer. Single-molecule force spectroscopy demonstrates binding of H84T-BanLec to multiple SARS-CoV-2 spike mannose sites with high affinity, and that H84T-BanLec competes with SARS-CoV-2 spike for binding to cellular ACE2. Modelling experiments identify distinct high-mannose glycans in spike recognized by H84T-BanLec. The multiple H84T-BanLec binding sites on spike likely account for the activity against SARS-CoV-2 variants and the lack of resistant mutants. The broad-spectrum H84T-BanLec should be clinically evaluated in respiratory viral infections including COVID-19.

New SARS-CoV-2 variants are continuously emerging with critical implications for therapies or vaccinations. All 22 N-glycan sites of SARS-CoV-2 Spike remain highly conserved among the variants B.1.1.7, 501Y.V2 and P.1, opening an avenue for robust therapeutic intervention. Here we used a comprehensive library of mammalian carbohydrate-binding proteins (lectins) to probe critical sugar residues on the full-length trimeric Spike and the receptor binding domain (RBD) of SARS-CoV-2. Two lectins, Clec4g and CD209c, were identified to strongly bind to Spike. Clec4g and CD209c binding to Spike was dissected and visualized in real time and at single molecule resolution using atomic force microscopy. 3D modelling showed that both lectins can bind to a glycan within the RBD-ACE2 interface and thus interferes with Spike binding to cell surfaces. Importantly, Clec4g and CD209c significantly reduced SARS-CoV-2 infections. These data report the first extensive map and 3D structural modelling of lectin-Spike interactions and uncovers candidate receptors involved in Spike binding and SARS-CoV-2 infections. The capacity of CLEC4G and mCD209c lectins to block SARS-CoV-2 viral entry holds promise for pan-variant therapeutic interventions.

BACKGROUND Adenylate cyclase (CyaA) is one of the major virulence factors of Bordetella pertussis that plays a key role in whooping cough pathogenesis. A putative transmembrane helical hairpin (α2-loop-α3), encompassing residues 529-594 of CyaA hemolysin (CyaA-Hly) domain, was previously proposed to be crucially involved in hemolytic activity against target erythrocytes. OBJECTIVE The main objective of this study was to gain more insight into membrane permeabilization of this toxin. Membrane-permeabilizing abilities of the purified 130-kDa CyaA-Hly and synthetic peptides corresponding to the helical component of interest, were evaluated. METHODS Synthetic peptides corresponding to the critical helical component, i.e. α2 (W528-G550), α3 (G568-R594) and α2-loop-α3 (W528-R594), were examined on various membrane models in comparison with the purified 130-kDa CyaA-Hly. The peptides were commercially synthesized and the purified toxin was obtained from recombinant plasmid construction and expression in Escherichia coli, followed by purification via immobilized-metal affinity chromatography. Membrane permeabilization or hemolysis of the peptides or the purified toxin were determined by liposomal leakage, hemolysis assays and atomic force microscopy (AFM) imaging. RESULTS Our results showed that the truncated 130-kDa CyaA-Hly, the synthetic peptides α2, α3 and the α2-loop-α3 hairpin exhibited distinct membrane-permeabilizing capacities in different membrane models. We demonstrated that the CyaA-Hly toxin and the peptides, especially the α2 peptide, caused nonspecific liposomal leakage as monitored by fluorescence dequenching of sulforhodamine B-loaded lipid vesicles. Notably, α2 peptide showed a predominant effect of membrane permeabilization when compared to α2-loop-α3 hairpin and α3 peptides. In addition, AFM imaging demonstrates lipid membrane disruption induced by the CyaA-Hly toxin or the peptidic α2-loop-α3 hairpin. CONCLUSION Overall, the study provides the supporting evidence that the putative helical α2-loop-α3 hairpin could interact with the lipid membranes while the helical α2 peptide strongly induced liposomal leakage and hemolysis, as compared with the helical α3 or the α2-loop-α3 peptides, suggesting that the helix 2 from the hydrophobic region of CyaA-Hly is a crucial component that contributes to membrane permeabilization.

Background The glycosylation of proteins on the surface of corneocytes is believed to play an important role in cellular adhesion in the stratum corneum (SC) of human skin. Mapping with accuracy the localization of glycans on the surface of corneocytes through traditional methods of immunohistochemistry and electron microscopy remains a challenging task as both approaches lack enough resolution or need to be performed in high vacuum conditions. Materials and methods We used an advanced mode of atomic force microscope (AFM), with simultaneous topography and recognition imaging to investigate the distribution of glycans on native (no chemical preparation) stripped samples of human SC. The AFM cantilever tips were functionalized with anti‐heparan sulfate antibody and the lectin wheat germ agglutinin (WGA) which binds specifically to N‐acetyl glucosamine and sialic acid. Results From the recognition imaging, we observed the presence of the sulfated glycosaminoglycan, heparan sulfate, and the glycans recognized by WGA on the surface of SC corneocytes in their native state. These glycans were found associated with bead‐like domains which represent corneodesmosomes in the SC layers. Glycan density was calculated to be ~1200 molecules/μm2 in lower layers of SC compared to an important decrease, (~106 molecules/μm2) closer to the surface due probably to corneodesmosome degradation. Conclusion Glycan spatial distribution and degradation is first observed on the surface of SC in native conditions and at high resolution. The method used can be extended to precisely localize the presence of other macromolecules on the surface of skin or other tissues where the maintenance of its native state is required.

Summary Structural maintenance of chromosomes (SMC) complexes organize genome topology in all kingdoms of life and have been proposed to perform this function by DNA loop extrusion. How this process works is unknown. Here, we have analyzed how loop extrusion is mediated by human cohesin-NIPBL complexes, which enable chromatin folding in interphase cells. We have identified DNA binding sites and large-scale conformational changes that are required for loop extrusion and have determined how these are coordinated. Our results suggest that DNA is translocated by a spontaneous 50 nm-swing of cohesin’s hinge, which hands DNA over to the ATPase head of SMC3, where upon binding of ATP, DNA is clamped by NIPBL. During this process, NIPBL “jumps ship” from the hinge toward the SMC3 head and might thereby couple the spontaneous hinge swing to ATP-dependent DNA clamping. These results reveal mechanistic principles of how cohesin-NIPBL and possibly other SMC complexes mediate loop extrusion., Graphical abstract, Highlights • Identification of cohesin’s DNA binding sites and movements needed for loop extrusion • A DNA binding site on the hinge might translocate DNA by ATP-independent swinging • DNA clamping on the ATPase heads is regulated by ATP-dependent engagement cycles • NIPBL couples ATP-independent and -dependent DNA translocation events, Cohesin hands DNA over long distances from one binding site to another, explaining how SMC complexes might fold genomes in all kingdoms of life.

Controversy regarding the number and function of ligand binding sites in neurotransmitter/sodium symporters arose from conflicting data in crystal structures and molecular pharmacology. Here, we have designed novel tools for atomic force microscopy that directly measure the interaction forces between the serotonin transporter (SERT) and the S- and R-enantiomers of citalopram on the single molecule level. This approach is based on force spectroscopy, which allows for the extraction of dynamic information under physiological conditions thus inaccessible via X-ray crystallography. Two distinct populations of characteristic binding strengths of citalopram to SERT were revealed in Na(+)-containing buffer. In contrast, in Li(+) -containing buffer, SERT showed only low force interactions. Conversely, the vestibular mutant SERT-G402H merely displayed the high force population. These observations provide physical evidence for the existence of two binding sites in SERT when accessed in a physiological context. Competition experiments revealed that these two sites are allosterically coupled and exert reciprocal modulation.

Escherichia coli cells containing the amyloid curli protein CsgA bind to abiotic surfaces and the extracellular matrix protein fibronectin. Here we describe procedures for following bacterial attachment to glass surfaces and provide protocols for coupling bacterial cells to AFM tips. Using single microbial cell force spectroscopy in physiological environment, we show methods to probe mechanical parameters and the dissociation of curliated E. coli cells from fibronectin surfaces by quantifying Young's modulus, unbinding forces, and de-adhesion works.

In this protocol, we provide a detailed step-by-step bacterial surface imaging and molecular analysis procedure. With SPM (scanning probe microscopy)-based dynamic force microscopy (DFM) imaging, we achieved a so far unprecedented resolution of ~1 nm on the outer surface layer of Tannerella forsythia and monitored the production of curli fibers on Escherichia coli in physiological conditions. Moreover, using these immobilization methods, single-molecule force spectroscopy experiments were conducted on living bacterial cells.

Permanent antibacterial coatings have been developed by brush-like polyethyleneimine (PEI) on polyurethane (PU) ureteral stents since bacterial adhesion and biofilm formation with the following encrustation on stent surface limit their long term usage. In order to control or prevent bacterial infections; PEI chains with two different molecular weights (Mn: 1800 or 60,000 Da) were covalently attached on the polyurethane (PU) surface by "grafting to" approach to obtain a brush-like structure. Then, PEI brushes were alkylated with bromohexane to enhance the disruption of bacterial membranes with increasing polycationic character. X-ray Photoelectron and Infrared Spectroscopy investigations confirmed that PEI grafting and alkylation steps were performed successfully. Surface roughness in dry state increased dramatically from 65.8 nm to 277.7 nm and 145.2 nm for short chain PEI and long chain PEI grafted samples, respectively. Both low and high molecular weight PEI grafts exhibited a brush-like structure and potent antibacterial activity by lowering the adherence of Klebsiella pneumonia, Escherichia coil and Proteus mirabilis species up to two orders of magnitude without any cytotoxic effect on L929 and G/G cells. Thus, permanent bactericidal activity was achieved by the contact-active strategy of dynamic PEI brush-like structures on polyurethane ureteral stent. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Influenza A viruses (IAV) initiate infection via binding of the viral hemagglutinin (HA) to sialylated glycan receptors on host cells. HAs receptor specificity towards sialic acid (SA) is well studied and clearly critical for virus infection, but the contribution of the highly complex cellular plasma membrane to the cellular specificity remains elusive. In addition, some studies indicated that other host cell factors such as the epidermal growth factor receptor might contribute to the initial virus-cell contact and further downstream signaling1.Here we use two complementary methods, glycan arrays and single-virus force spectroscopy (SVFS) to compare influenza virus receptor specificity with actual host cell binding. Unexpectedly, our study reveals that HAs receptor binding preference does not necessarily reflect virus-cell specificity. We propose SVFS as a tool to elucidate the cell binding preference of IAV thereby including the complex environment of sialylated receptors within the plasma membrane of living cells.

Molecular recognition force spectroscopy, a biosensing atomic force microscopy technique allows to characterise the dissociation of ligand-receptor complexes at the molecular level. Here, we used molecular recognition force spectroscopy to study the binding capability of recently developed testosterone binders. The two avidin-based proteins called sbAvd-1 and sbAvd-2 are expected to bind both testosterone and biotin but differ in their binding behaviour towards these ligands. To explore the ligand binding and dissociation energy landscape of these proteins, we tethered biotin or testosterone to the atomic force microscopy probe while the testosterone-binding protein was immobilized on the surface. Repeated formation and rupture of the ligand-receptor complex at different pulling velocities allowed determination of the loading rate dependence of the complex-rupturing force. In this way, we obtained the molecular dissociation rate (k(off)) and energy landscape distances (x(β)) of the four possible complexes: sbAvd-1-biotin, sbAvd-1-testosterone, sbAvd-2-biotin and sbAvd-2-testosterone. It was found that the kinetic off-rates for both proteins and both ligands are similar. In contrast, the x(β) values, as well as the probability of complex formations, varied considerably. In addition, competitive binding experiments with biotin and testosterone in solution differ significantly for the two testosterone-binding proteins, implying a decreased cross-reactivity of sbAvd-2. Unravelling the binding behaviour of the investigated testosterone-binding proteins is expected to improve their usability for possible sensing applications.

Tannerella forsythia is among the most potent triggers of periodontal diseases, and approaches to understand underlying mechanisms are currently intensively pursued. A ~22-nm-thick, 2D crystalline surface (S-) layer that completely covers Tannerella forsythia cells is crucially involved in the bacterium-host cross-talk. The S-layer is composed of two intercalating glycoproteins (TfsA-GP, TfsB-GP) that are aligned into a periodic lattice. To characterize this unique S-layer structure at the nanometer scale directly on intact T. forsythia cells, three complementary methods, i.e., small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), and single-molecular force spectroscopy (SMFS), were applied. SAXS served as a difference method using signals from wild-type and S-layer-deficient cells for data evaluation, revealing two possible models for the assembly of the glycoproteins. Direct high-resolution imaging of the outer surface of T. forsythia wild-type cells by AFM revealed a p4 structure with a lattice constant of ~9.0 nm. In contrast, on mutant cells, no periodic lattice could be visualized. Additionally, SMFS was used to probe specific interaction forces between an anti-TfsA antibody coupled to the AFM tip and the S-layer as present on T. forsythia wild-type and mutant cells, displaying TfsA-GP alone. Unbinding forces between the antibody and wild-type cells were greater than with mutant cells. This indicated that the TfsA-GP is not so strongly attached to the mutant cell surface when the co-assembling TfsB-GP is missing. Altogether, the data gained from SAXS, AFM, and SMFS confirm the current model of the S-layer architecture with two intercalating S-layer glycoproteins and TfsA-GP being mainly outwardly oriented.

CD1d molecule, a monomorphic major histocompatibility complex class I-like molecule, presents different types of glycolipids to invariant natural killer T (iNKT) cells that play an important role in immunity to infection and tumors, as well as in regulating autoimmunity. Here, we present simultaneous topography and recognition imaging (TREC) analysis to detect density, distribution and localization of single CD1d molecules on THP1 cells that were loaded with different glycolipids. TREC was conducted using magnetically coated atomic force microscopy tips functionalized with a biotinylated iNKT cell receptor (TCR). The recognition map revealed binding sites visible as dark spots, resulting from oscillation amplitude reduction during specific binding between iNKT TCR and the CD1d–glycolipid complex. THP1 cells were pulsed with three different glycolipids (α-GalCer, C20 and OCH12) for 4 and 16 hr. Whereas CD1d–α-GalCer and CD1d–C20:2 complexes on cellular membrane formed smaller microdomains up to ~10 000 nm2 (dimension area), OCH12 loaded CD1d complexes presented larger clusters with a dimension up to ~30 000 nm2. Moreover, the smallest size of recognition spots was about 25 nm, corresponding to a single CD1d binding site. TREC successfully revealed the distribution and localization of CD1d–glycolipid complexes on THP1 cell with single molecule resolution under physiological conditions. Copyright © 2013 John Wiley & Sons, Ltd.

Many enteric bacteria including pathogenic Escherichia coli and Salmonella strains produce curli fibers that bind to host surfaces, leading to bacterial internalization into host cells. By using a nanomechanical force-sensing approach, we obtained real-time information about the distribution of molecular bonds involved in the adhesion of curliated bacteria to fibronectin. We found that curliated E. coli and fibronectin formed dense quantized and multiple specific bonds with high tensile strength, resulting in tight bacterial binding. Nanomechanical recognition measurements revealed that approximately 10 bonds were disrupted either sequentially or simultaneously under force load. Thus the curli formation of bacterial surfaces leads to multi-bond structural components of fibrous nature, which may explain the strong mechanical binding of curliated bacteria to host cells and unveil the functions of these proteins in bacterial internalization and invasion.

The 2009 influenza pandemic originated from a swine-origin H1N1 virus, which, although less pathogenic than anticipated, may acquire additional virulence-associated mutations in the future. To estimate the potential risk, we sequentially passaged the isolate A/Hamburg/04/2009 in A549 human lung epithelial cells. After passage 6, we observed a 100-fold increased replication rate. High-throughput sequencing of viral gene segments identified five dominant mutations, whose contribution to the enhanced growth was analyzed by reverse genetics. The increased replication rate was pinpointed to two mutations within the hemagglutinin (HA) gene segment (HA(1), D130E, HA(2) I91L), near the receptor binding site and the stem domain. The adapted virus also replicated more efficiently in mice in vivo. Enhanced replication rate correlated with increased fusion pH of the HA protein and a decrease in receptor affinity. Our data might be relevant for surveillance of pre-pandemic strains and development of high titer cell culture strains for vaccine production. (C) 2016 The Authors. Published by Elsevier Inc.

Curli are functional microbial amyloids that are major components of the complex extracellular matrix produced by Enterobacteriaceae. They play important functions in biofilm formation, bacterial invasion into host cells, and pathological processes which lead to numerous infections and autoimmune diseases. Curli fibers interact with host cell multi-domain adhesive glycoproteins, such as laminin and fibronectin. Several groups have investigated the structure of curli fimbriae, as well as their mechanical properties and adhesion mechanisms. However, the specificity and exact mechanism of curli-mediated bacterial binding to cells remains obscure. Here, single-molecule force spectroscopy reveals dynamic and statistical information about the formation of molecular bonds involved in the adhesion of curliated bacteria to fibronectin. We show that a specific interaction between the bacterial curli protein CsgA and the RGD domain of fibronectin leads to tight binding. Via single-cell force spectroscopy we measured distinct interaction forces on the surface between the isolated CsgA protein or the bacteria-producing CsgA curli and full length fibronectin, fibronectin domain III, and RGD peptide, respectively. These experiments demonstrate that the forces required to break adhesion are quantized and reflect formation of a dense collective network. These networks comprise at least 20 specific molecular bonds that lead to tight bacterial binding. Our results underline the significance of amyloid formation on bacterial surfaces as multi-bond structural components in curli-mediated bacterial adhesion to fibronectin.

Controversy regarding the number and function of ligand binding sites in neurotransmitter-sodium symporters arose from conflicting data in crystal structures and molecular pharmacology. We designed novel molecular tools for atomic force microscopy that directly measure the interaction forces between the serotonin transporter (SERT) and the S- and R-enantiomers of citalopram on the single molecule level. Our approach is based on force spectroscopy, which allows for the extraction of dynamic information under physiological conditions inaccessible via X-ray crystallography. Two distinct populations of characteristic binding strengths of citalopram to SERT were revealed in Na+-containing buffer. In contrast, in Li+-containing buffer, SERT showed only low force interactions. Conversely, the vestibular mutant SERT-G402H merely displayed the high force population. These observations provide physical evidence for the existence of two binding sites in SERT, i.e. a central (S1) site and a vestibular (S2) site, when accessed in a physiological context. Competition experiments revealed that these two sites are allosterically coupled and exert reciprocal modulation. Interaction forces between the cocaine analogue, MFZ2-12, and the dopamine transporter (DAT) revealed that two populations of binding strength were pronounced in the presence of Zn2+ (10 µM), accompanied by an elevated binding activity. These findings are in accordance with a Zn2+ induced outward facing conformational change. Absence of Na+, Zn2+, or mutation at S422A dramatically reduced the population of strong interaction forces, indicating that it originated from the central S1 binding site. Our nanopharmacological approach paves a new avenue to explore transient binding sites in clinically relevant membrane transporters and opens the door to quantitatively address the modulation of interaction forces between ligands and allosterically coupled binding sites.This work was supported by Austrian Science Fund Grant F35 and the National Institute on Drug Abuse-Intramural Research Program, NIH.

The von Willebrand factor (VWF) is a glycoprotein in the blood that plays a central role in hemostasis. Among other functions, VWF is responsible for platelet adhesion at sites of injury via its A1 domain. Its adjacent VWF domain A2 exposes a cleavage site under shear to degrade long VWF fibers in order to prevent thrombosis. Recently, it has been shown that VWF A1/A2 interactions inhibit the binding of platelets to VWF domain A1 in a force-dependent manner prior to A2 cleavage. However, whether and how this interaction also takes place in longer VWF fragments as well as the strength of this interaction in the light of typical elongation forces imposed by the shear flow of blood remained elusive. Here, we addressed these questions by using single molecule force spectroscopy (SMFS), Brownian dynamics (BD), and molecular dynamics (MD) simulations. Our SMFS measurements demonstrate that the A2 domain has the ability to bind not only to single A1 domains but also to VWF A1A2 fragments. SMFS experiments of a mutant [A2] domain, containing a disulfide bond which stabilizes the domain against unfolding, enhanced A1 binding. This observation suggests that the mutant adopts a more stable conformation for binding to A1. We found intermolecular A1/A2 interactions to be preferred over intramolecular A1/A2 interactions. Our data are also consistent with the existence of two cooperatively acting binding sites for A2 in the A1 domain. Our SMFS measurements revealed a slip-bond behavior for the A1/A2 interaction and their lifetimes were estimated for forces acting on VWF multimers at physiological shear rates using BD simulations. Complementary fitting of AFM rupture forces in the MD simulation range adequately reproduced the force response of the A1/A2 complex spanning a wide range of loading rates. In conclusion, we here characterized the auto-inhibitory mechanism of the intramolecular A1/A2 bond as a shear dependent safeguard of VWF, which prevents the interaction of VWF with platelets.

This article reviews the role of segments of SLCs located outside the plasma membrane bilayer (ectodomains) using the inhibition of SGLTs (SLC5 family) by the aromatic glucoside phlorizin as a model system. Phlorizin has been the lead substance for the development of SGLT2 (SLC5A2) inhibitors that have been introduced recently for the treatment of type 2 diabetes. Using mainly biophysical methods, it is shown that three ectodomains form well-defined substructures, such as short helices, that are arranged in a vestibule and undergo significant conformational changes during binding of phlorizin. From these data, tentative structures of inhibitor/ectodomain complexes are derived by molecular modeling. The ectodomains provide an additional binding site for aglucones, which cooperates with the binding site for the sugar moiety of phlorizin in the sugar translocation pathway, buried inside the membrane. They play a significant role in determining the specificity, selectivity, and affinity of sugar transport inhibitors and might even explain the difference in sensitivity of various members of the SGLT family, located in different tissues and organs of the human body. Similar binding modes are suggested for several other SLCs, in particular the monoamine transporter (SLC6 family), that belong to the sodium/neurotransmitter cotransporter family. Version of record

We here give information for a deeper understanding of single molecule force spectroscopy (SMFS) data through the example of the blood protein von Willebrand factor (VWF). It is also shown, how fitting of rupture forces versus loading rate profiles in the molecular dynamics (MD) loading-rate range can be used to demonstrate the qualitative agreement between SMFS and MD simulations. The recently developed model by Bullerjahn, Sturm, and Kroy (BSK) was used for this demonstration. Further, Brownian dynamics (BD) simulations, which can be utilized to estimate the lifetimes of intramolecular VWF interactions under physiological shear, are described. For interpretation and discussion of the methods and data presented here, we would like to directly point the reader to the related research paper, “Mutual A domain interactions in the force sensing protein von Willebrand Factor” (Posch et al., 2016) [1]. Keywords: Atomic force microscopy, Single molecule force spectroscopy, Molecular dynamics simulation, Brownian dynamics simulation, von Willebrand factor

Influenza virus belongs to a wide range of enveloped viruses. The major spike protein hemagglutinin binds sialic acid residues of glycoproteins and glycolipids with dissociation constants in the millimolar range [Sauter NK, et al. (1992) Biochemistry 31:9609–9621], indicating a multivalent binding mode. Here, we characterized the attachment of influenza virus to host cell receptors using three independent approaches. Optical tweezers and atomic force microscopy-based single-molecule force spectroscopy revealed very low interaction forces. Further, the observation of sequential unbinding events strongly suggests a multivalent binding mode between virus and cell membrane. Molecular dynamics simulations reveal a variety of unbinding pathways that indicate a highly dynamic interaction between HA and its receptor, allowing rationalization of influenza virus–cell binding quantitatively at the molecular level.

The Gram-negative oral pathogen Tannerella forsythia is decorated with a 2D crystalline surface (S-) layer, with two different S-layer glycoprotein species being present. Prompted by the predicted virulence potential of the S-layer, this study focused on the analysis of the arrangement of the individual S-layer glycoproteins by a combination of microscopic, genetic, and biochemical analyses. The two S-layer genes are transcribed into mRNA and expressed into protein in equal amounts. The S-layer was investigated on intact bacterial cells by transmission electron microscopy, by immune fluorescence microscopy, and by atomic force microscopy. The analyses of wild-type cells revealed a distinct square S-layer lattice with an overall lattice constant of 10.1 ± 0.7 nm. In contrast, a blurred lattice with a lattice constant of 9.0 nm was found on S-layer single-mutant cells. This together with in vitro self-assembly studies using purified (glyco)protein species indicated their increased structural flexibility after self-assembly and/or impaired self-assembly capability. In conjunction with TEM analyses of thin-sectioned cells, this study demonstrates the unusual case that two S-layer glycoproteins are co-assembled into a single S-layer. Additionally, flagella and pilus-like structures were observed on T. forsythia cells, which might impact the pathogenicity of this bacterium.

Background: The serotonin transporter is the site of action of antidepressants and amphetamines. Results: Single molecular force spectroscopy allowed for mapping the energy landscape involved in MFZ2-12/SERT binding. Conclusion: Our data indicate that the outer vestibule imposes a barrier on the entry of MFZ2-12 into the SERT substrate binding site. Significance: Our results provide a useful framework for a further exploration of antidepressant binding., The serotonin transporter (SERT) terminates neurotransmission by removing serotonin from the synaptic cleft. In addition, it is the site of action of antidepressants (which block the transporter) and of amphetamines (which induce substrate efflux). The interaction energies involved in binding of such compounds to the transporter are unknown. Here, we used atomic force microscopy (AFM) to probe single molecular interactions between the serotonin transporter and MFZ2-12 (a potent cocaine analog) in living CHOK1 cells. For the AFM measurements, MFZ2-12 was immobilized on AFM tips by using a heterobifunctional cross-linker. By varying the pulling velocity in force distance cycles drug-transporter complexes were ruptured at different force loadings allowing for mapping of the interaction energy landscape. We derived chemical rate constants from these recordings and compared them with those inferred from inhibition of transport and ligand binding: koff values were in good agreement with those derived from uptake experiments; in contrast, the kon values were scaled down when determined by AFM. Our observations generated new insights into the energy landscape of the interaction between SERT and inhibitors. They thus provide a useful framework for molecular dynamics simulations by exploring the range of forces and energies that operate during the binding reaction.

Calcium is an important second messenger involved in many cellular processes such as cell proliferation, T-cell activation, muscle contraction, egg fertilization, or apoptosis. Calcium entry into non-excitable cells is mainly carried by store-operated Ca2+ release-activated Ca2+ (CRAC) channels, whereby Orai was found to be the calcium channel in the plasma membrane and the stromal interaction molecule (STIM) to act as a calcium sensor in the endoplasmatic reticulum (ER), and as an activator of Orai channels. A reduction of Ca2+ in the ER causes STIM to oligomerize, enabling its accumulation at the ER-plasma membrane junctions where it binds directly to Orai to open the Ca2+-channel. Compared with activation, much less is known about the mechanisms underlying Ca2+-dependent inactivation (CDI) processes. It has been proposed that binding of calmodulin (CaM) to a highly conserved N-terminal segment of Orai1 adjacent to its first transmembrane helix is critical for CDI. Hereby it is assumed that CaM acts in concert with STIM1 and the N terminus of Orai1 to evoke rapid CRAC channel inactivation. However, the molecular basis of these interactions remains unclear. In this study, the interaction between calmodulin and the N-terminal fragment of Orai1 and its homologue Orai3 was studied by Single Molecule Recognition Force Spectroscopy, Surface Plasmon Resonance, and Microscale Thermophoresis. Both Orai fragments showed a calcium-dependent and highly specific interaction with calmodulin, with slightly longer bond lifetimes and lower dissociation rate constants for Orai3 than for Orai1. Our data support a switch between a 1:1 and a 1:2 binding stoichiometry between CaM and Orai1/3. The latter occurs at low CaM concentration, has much higher affinity, and takes much longer to disscociate after removal of Ca2+ by EGTA. By comparison, only 1:1 binding with high affinity was found between CaM and smooth muscle myosin light chain kinase. This emphasizes the importance of the unique amino acid sequence of the conserved N-terminal Orai segment for high CaM affinity and CDI. This work was supported by the state of Upper Austria (project DK NanoCell).

Proteins mediating the transport of solutes across the cell membrane control the intracellular conditions in which life can occur. Because of the particular arrangement of spanning a lipid bilayer and the many conformations required for their function, transport proteins pose significant obstacles for the investigation of their structure–function relation. Crystallographic studies, if available, define the transmembrane segments in a “frozen” state and do not provide information on the dynamics of the extramembranous loops, which are similarly evolutionary conserved and thus as functionally important as the other parts of the protein. The current review presents biophysical methods that can shed light on the dynamics of transporters in the membrane. The techniques that are presented in some detail are single-molecule recognition atomic force microscopy and tryptophan scanning, which can report on the positioning of the loops and on conformational changes at the outer surface. Studies on a variety of symporters are discussed, which use gradients of sodium or protons as energy source to translocate (mainly organic) solutes against their concentration gradients into or out of the cells. Primarily, investigations of the sodium–glucose cotransporter SGLT1 are used as examples for this biophysical approach to understand transporter function.

We demonstrate simultaneous transverse dynamic force microscopy and molecular recognition imaging using tuning forks as piezoelectric sensors. Tapered aluminum-coated glass fibers were chemically functionalized with biotin and anti-lysozyme molecules and attached to one of the prongs of a 32 kHz tuning fork. The lateral oscillation amplitude of the tuning fork was used as feedback signal for topographical imaging of avidin aggregates and lysozyme molecules on mica substrate. The phase difference between the excitation and detection signals of the tuning fork provided molecular recognition between avidin/biotin or lysozyme/anti-lysozyme. Aggregates of avidin and lysozyme molecules appeared as features with heights of 1–4 nm in the topographic images, consistent with single molecule atomic force microscopy imaging. Recognition events between avidin/biotin or lysozyme/anti-lysozyme were detected in the phase image at high signal-to-noise ratio with phase shifts of 1–2°. Because tapered glass fibers and shear-force microscopy based on tuning forks are commonly used for near-field scanning optical microscopy (NSOM), these results open the door to the exciting possibility of combining optical, topographic and biochemical recognition at the nanometer scale in a single measurement and in liquid conditions.

Native-protein nanolithography is combined with topography and recognition imaging to synergistically use AFM tips to write and image nanoscale protein patterns on a surface (see picture). The approach is validated with different feedback modes, using surface-bound biotinylated bovine serum albumin (BSA) protein and AFM tips carrying streptavidin.

Minor group human rhinoviruses (HRVs) attach to members of the low-density lipoprotein receptor family and are internalized via receptor-mediated endocytosis. The attachment of HRV2 to the cell surface, the first step in infection, was characterized at the single-molecule level by atomic force spectroscopy. Sequential binding of multiple receptors was evident from recordings of characteristic quantized force spectra, which suggests that multiple receptors bound to the virus in a timely manner. Unbinding forces required to detach the virus from the cell membrane increased within a time frame of several hundred milliseconds. The number of receptors involved in virus binding was determined, and estimates for on-rate, off-rate, and equilibrium binding constant of the interaction between HRV2 and plasma membrane-anchored receptors were obtained.

Contains fulltext : 69440.pdf (Publisher’s version ) (Closed access) BACKGROUND: The release of vesicles by red blood cells (RBCs) occurs in vivo and in vitro under various conditions. Vesiculation also takes place during RBC storage and results in the accumulation of vesicles in RBC units. The membrane protein composition of the storage-associated vesicles has not been studied in detail. The characterization of the vesicular membrane might hint at the underlying mechanism of the storage-associated changes in general and the vesiculation process in particular. STUDY DESIGN AND METHODS: Vesicles from RBCs that had been stored for various periods were isolated and RBCs of the same RBC units were used to generate calcium-induced microvesicles. These two vesicle types were compared with respect to their size with atomic force microscopy, their raft protein content with detergent-resistant membrane (DRM) analysis, and their thrombogenic potential and activity with annexin V binding and thrombin generation, respectively. RESULTS: The storage-associated vesicles and the calcium-induced microvesicles are similar in size, in thrombogenic activity, and in membrane protein composition. The major differences were the relative concentrations of the major integral DRM proteins. In storage-associated vesicles, stomatin is twofold enriched and flotillin-2 is threefold depleted. CONCLUSION: These data indicate that a stomatin-specific, raft-based process is involved in storage-associated vesiculation. A model of the vesiculation process in RBCs is proposed considering the raft-stabilizing properties of stomatin, the low storage temperature favoring raft aggregation, and the previously reported storage-associated changes in the cytoskeletal organization.

Atomic force microscopy (AFM) has developed into a key technique for elucidation of biological systems on the single molecular level. In particular, molecular recognition force microscopy has proven to be a powerful tool for the investigation of biological interactions under near physiological conditions. For this purpose, ligands are tethered to AFM tips and the interaction forces with cognate receptors on the sample surface are measured with pico-Newton accuracy. In the first step of tip functionalization, amino groups are typically introduced on the initially inert AFM tip. Several methods have been developed to reproducibly adjust the desired low density of amino groups on the tip surface, i.e. esterification with ethanolamine, gas-phase silanization with aminopropyl-triethoxysilane (APTES), or treatment with aminophenyl-trimethoxysilane (APhS) in toluene solution. In the present study, the usefulness of these methods for attachments of antibodies to AFM tips was characterized by a standardized test system, in which biotinylated IgG was bound to the tip and a dense monolayer of avidin on mica served as test sample. All three methods of aminofunctionalization were found fully satisfactory for attachment of single antibodies to AFM tips, only in a parallel macroscopic assay on silicon nitride chips a minor difference was found in that APTES appeared to yield a slightly lower surface density of amino groups.

Mechanical single-molecule techniques offer exciting possibilities to investigate protein folding and stability in native environments at submolecular resolution. By applying a free-energy reconstruction procedure developed by Hummer and Szabo, which is based on a statistical theorem introduced by Jarzynski, we determined the unfolding free energy of the membrane proteins bacteriorhodopsin (BR), halorhodopsin, and the sodium-proton antiporter NhaA. The calculated energies ranged from 290.5 kcal/mol for BR to 485.5 kcal/mol for NhaA. For the remarkably stable BR, the equilibrium unfolding free energy was independent of pulling rate and temperature ranging between 18 and 42 degrees C. Our experiments also revealed heterogeneous energetic properties in individual transmembrane helices. In halorhodopsin, the stabilization of a short helical segment yielded a characteristic signature in the energy profile. In NhaA, a pronounced peak was observed at a functionally important site in the protein. Since a large variety of single- and multispan membrane proteins can be tackled in mechanical unfolding experiments, our approach provides a basis for systematically elucidating energetic properties of membrane proteins with the resolution of individual secondary-structure elements.

Plasmid DNA and viral RNA were imaged in a liquid environment by dynamic force microscopy (DFM) and fine structures of DNA with heights of 1.82±0.66 nm were obtained in topographical images. In simultaneously acquired phase images, DNA could be imaged with better contrast at lower imaging forces. By splitting the cantilever oscillation signal into lower and upper parts, the contribution of the adhesion between tip and sample to the topographical images was eliminated, resulting in better signal-to-noise ratio. DFM of the single stranded RNA genome of a human rhinovirus showed loops protruding from a condensed RNA core, 20–50 nm in height. The mechanical rigidity of the RNA was determined by single molecule pulling experiments. From fitting RNA stretching curves to the Worm-Like-Chain (WLC) model a persistence length of 1.0±0.17 nm was obtained.

A recurring theme of mechanosensitive proteins is a cryptic binding site that gets uncovered by an external force. Here, we test the role of such mechanism in the adhesion of platelets at sites of vascular injury, a key process mediated by the von Willebrand factor (VWF). Our data from atomistic simulations, atomic force microscopy (AFM), and microfluidic experiments demonstrate that the VWF A2 domain binds to the VWF A1 domain, such that it buries the platelet binding site located at A1. This implies inactivation of VWF for the binding of platelets by a direct protein-protein interaction between the VWF A1 and A2 domains. During force-probe simulations and AFM experiments, a stretching force uncovered the platelet binding site, by dissociating the A1-A2 complex. This process was accompanied with only a partial unfolding of the A2 domain causing minor exposure of its cleavage site. Our data thus suggest that activation for platelet binding and degradation by cleavage are coupled through the interaction of A1 with A2, and force guarantees that VWF gets ready for activation before cleavage. Microfluidic experiments with an A2-deletion VWF mutant corroborate the critical inactivation role of the A2 domain in vitro. Overall, inactivation of VWF by force-dependent inter-domain A1-A2 interactions answers the question of how platelets are prevented to bind to VWF under equilibrium conditions. The notion of a cryptic protein binding site uncovered by force does not only provide the molecular basis for the long-standing observation of shear-dependent platelet binding during blood clotting, but it might also help to explain shear-induced VWF self-assembly.

Covalent binding of bioligands to atomic force microscope (AFM) tips converts them into monomolecular biosensors by which cognate receptors can be localized on the sample surface and fine details of ligand-receptor interaction can be studied. Tethering of the bioligand to the AFM tip via a approximately 6 nm long, flexible poly(ethylene glycol) linker (PEG) allows the bioligand to freely reorient and to rapidly "scan" a large surface area while the tip is at or near the sample surface. In the standard coupling scheme, amino groups are first generated on the AFM tip. In the second step, these amino groups react with the amino-reactive ends of heterobifunctional PEG linkers. In the third step, the 2-pyridyl-S-S groups on the free ends of the PEG chains react with protein thiol groups to give stable disulfide bonds. In the present study, this standard coupling scheme has been critically examined, using biotinylated IgG with free thiols as the bioligand. AFM tips with PEG-tethered biotin-IgG were specifically recognized by avidin molecules that had been adsorbed to mica surfaces. The unbinding force distribution showed three maxima that reflected simultaneous unbinding of 1, 2, or 3 IgG-linked biotin residues from the avidin monolayer. The coupling scheme was well-reproduced on amino-functionalized silicon nitride chips, and the number of covalently bound biotin-IgG per microm2 was estimated by the amount of specifically bound ExtrAvidin-peroxidase conjugate. Coupling was evidently via disulfide bonds, since only biotin-IgG with free thiol groups was bound to the chips. The mechanism of protein thiol coupling to 2-pyridyl-S-S-PEG linkers on AFM tips was further examined by staging the coupling step in bulk solution and monitoring turnover by release of 2-pyridyl-SH which tautomerizes to 2-thiopyridone and absorbs light at 343 nm. These experiments predicted 10(3)-fold slower rates for the disulfide coupling step than actually observed on AFM tips and silicon nitride chips. The discrepancy was reconciled by assuming 10(3)-fold enrichment of protein on AFM tips via preadsorption, as is known to occur on comparable inorganic surfaces.

Atomic force microscopy (AFM) was used to probe topology, conformational changes and initial substratecarrier interactions of Na+-glucose co-transporter (SGLT1) in living cells on a single-molecule level. By scanning SGLT1-transfected Chinese hamster ovary (CHO) cells with AFM tips carrying an epitope-specific antibody directed against the extramembranous C-terminal loop 13, significant recognition events could be detected. Specificity was confirmed by the absence of events in nontransfected CHO cells and by the use of free antigen and free antibody superfusion. Thus, contrary to computer predictions on SGLT1 topology, loop 13 seems to be part of the extracellular surface of the transporter. Binding probability of the antibody decreased upon addition of phlorizin, a specific inhibitor of SGLT1, suggesting a considerable conformational change of loop 13 when the inhibitor occludes the sugar translocation pathway. Using an AFM tip carrying 1-thio-D-glucose, direct evidence could be obtained that in the presence of Na+ a sugarbinding site appears on the transporter surface. The binding site accepts the sugar residue of the glucoside phlorizin, free D-glucose, and D-galactose, but not free Lglucose and probably represents the first of several selectivity filters of the transporter. This work demonstrates the potential of AFM to study the presence and dynamics of plasma membrane transporters in intact cells on the single molecule level.

Cystic fibrosis (CF), the most common genetic disease among Caucasians, is caused by mutations in the gene encoding CFTR (cystic fibrosis transmembrane conductance regulator). The most frequent mutation, DeltaF508, results in protein misfolding and, as a consequence, prevents CFTR from reaching its final location at the cell surface. CFTR is expressed in various cell types including red blood cells. The functional role of CFTR in erythrocytes is still unclear. Since the number of CFTR copies in a single erythrocyte of healthy donors and CF patients with a homozygous DeltaF508 mutation is unknown, we counted CFTR, localized in erythrocyte plasma membrane, at the single molecule level. A novel experimental approach combining atomic force microscopy with quantum-dot-labeled anti-CFTR antibodies, used as topographic surface markers, was employed to detect individual CFTR molecules. Analysis of erythrocyte plasma membranes taken from healthy donors and CF patients with a homozygous DeltaF508 mutation reveals mean (SEM) values of 698 (12.8) (n=542) and 172 (3.8) (n=538) CFTR molecules per red blood cell, respectively. We conclude that erythrocytes reflect the CFTR status of the organism and that quantification of CFTR in a blood sample could be useful in the diagnosis of CFTR related diseases.

Bacillus thuringiensis Cry δ -endotoxins cause death of susceptible insect larvae by forming lytic pores in the midgut epithelial cell membranes. The 65 kDa trypsin activated Cry4Ba toxin was previously shown to be capable of permeabilizing liposomes and forming ionic channels in receptor-free planar lipid bilayers. Here, magnetic ACmode (MACmode) atomic force microscopy (AFM) was used to characterize the lateral distribution and the native molecular structure of the Cry4Ba toxin in the membrane. Liposome fusion and the Langmuir–Blodgett technique were employed for supported lipid bilayer preparations. The toxin preferentially inserted in a self-assembled structure, rather than as a single monomeric molecule. In addition, the spontaneous insertion into receptor-free lipid bilayers lead to formation of characteristic pore-like structures with four-fold symmetry, suggesting that tetramers are the preferred oligomerization state of this toxin.

Recent developments in single molecule force spectroscopy have allowed investigating the interaction between two redox partners, Azurin and Cytochrome C 551. Azurin has been directly chemisorbed on a gold electrode whereas cytochrome c has been linked to the atomic force microscopy tip by means of a heterobifunctional flexible cross-linker. When recording force-distance cycles, molecular recognition events could be observed, displaying unbinding forces of approximately 95 pN for an applied loading rate of 10 nN/s. The specificity of molecular recognition was confirmed by the significant decrease of unbinding probability observed in control block experiments performed adding free azurin solution in the fluid cell. In addition, the complex dissociation kinetics has been here investigated by monitoring the unbinding forces as a function of the loading rate: the thermal off-rate was estimated to be approximately 14 s(-1), much higher than values commonly estimated for complexes more stable than electron transfer complexes. Results here discussed represent the first studies on molecular recognition between two redox partners by atomic force microscopy.

Simultaneous topography and recognition imaging (TREC), 2] a recent development in dynamic force microscopy, has proven to be a powerful technique in biophysical research. In contrast to the common force mapping mode, the slow imaging speed and the low lateral resolution are overcome by oscillating a functionalized tip close to its resonance frequency during the scan across the surface. In these studies, the topographical imaging of receptor molecules is combined with molecular recognition by their cognate ligands bound to the atomic force microscope (AFM) tip via a distensible tether. The binding sites are evident from the reduction in the oscillation amplitude, as a result of specific recognition during the lateral scan. The receptors are recognized by the ligand on the scanning tip with a lateral resolution of a few nanometers, yielding a topographic image and a separate map of recognition sites from a single scan. Because this new technique opens a broad range of biological applications, a stable and easy-to-use setup is of key interest for new users. Using well-characterized, high-affinity biological binding partners, such as avidin–biotin, for TREC imaging enables a better understanding of the key factors for optimizing the scanning parameters. The robust and well-described avidin–biotin interaction offers an ideal pair of binding partners. Avidin–biotin is 1) robust and reliable, 2) well-known in terms of binding properties, 3) easy to prepare with commercially available components. Moreover, 4) avidin can simply be adsorbed to mica, and mica is an ideal support for AFM imaging. Finally, 5) the biotin–PEG (poly(ethylene glycol)) tether is commercially available and can be attached to amino-functionalized AFM tips in one step. Single avidin molecules can easily be immobilized onto mica via electrostatic adsorption by virtue of their positive net charge at neutral pH. Using different concentrations of avidin in the adsorption buffer, the surface coverage of avidin on mica can be adjusted easily. In addition, a biotin residue was coupled to the AFM tip via a distensible PEG chain. More specifically, biotin was covalently tethered to the amino-functionalized tip in a single coupling step, using “biotin-PEG-NHS” which consists of a PEG chain with a biotin on one end and an amino-reactive N-hydroxysuccinimide ester function (NHS group) on the other. With this configuration, two independent maps were simultaneously acquired, that is, a topography image of the immobilized avidin molecules and a lateral map of the corresponding recognition sites, both recorded at experimental times comparable to normal AFM imaging. Before being applied to TREC, the tips were examined for a functional biotin residue by force spectroscopy experiments on a mica surface densely covered with avidin molecules. Force spectroscopy with an oscillating tip offers an important tool for adjusting the scanning parameters in TREC microscopy. In simultaneously recorded amplitude–distance and force–distance cycles (Figure 1), the oscillation amplitude and the cantilever bending force, respectively, were investigated.

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.

Human rhinovirus serotype 1A (HRV1A) binds more strongly to the mouse low-density lipoprotein receptor (LDLR) than to the human homologue (M. Reithmayer, A. Reischl, L. Snyers, and D. Blaas, J. Virol. 76: 6957-6965, 2002). Here, we used this fact to determine the binding site of HRV1A by replacing selected ligand binding modules of the human receptor with the corresponding ligand binding modules of the mouse receptor. The chimeric proteins were expressed in mouse fibroblasts deficient in endogenous LDLR and LDLR-related protein, both used by minor group HRVs for cell entry. Binding was assessed by virus overlay blots, by immunofluorescence microscopy, and by measuring cell attachment of radiolabeled virus. Replacement of ligand binding repeat 5 of the human LDLR with the corresponding mouse sequence resulted in a substantial increase in HRV1A binding, whereas substitution of repeats 3 and 4 was without effect. Replacement of human receptor repeats 1 and 2 with the murine homologues also increased virus binding. Finally, murine receptor modules 1, 2, and 5 simultaneously introduced into the human receptor resulted in HRV1A binding indistinguishable from mouse wild-type receptor. Thus, repeats 1 and/or 2 and repeat 5 are involved in HRV1A attachment. Changing CDG GP D in the acidic cluster of module 5 in the human receptor to CDG EA D present in the mouse receptor led to substantially increased binding of HRV1A, indicating an important role of the glutamate residue in HRV1A recognition.

Antibody binding to surface antigens in membranes is the primary event in the specific immune defence of vertebrates. Here we used force microscopy to study the dynamics of antibody recognition of mutant purple membranes from Halobacterium salinarum containing a genetically appended anti-Sendai recognition epitope. Ligation of individual anti-Sendai antibodies to their antigenic epitopes was observed over time. Their increase in number within a small selected area revealed an apparent kinetic on-rate. The membrane-bound antibodies showed many different conformations that ranged from globular to V- and Y-like shapes. The maximum distance of two Fab fragments of the same antibody was observed to be approximately 18 nm, indicating an overall strong intrinsic flexibility of the antibody hinge region. Fab fragments of bound anti-Sendai antibodies were allocated to antigenic sites of the purple membrane, allowing the identification and localization of individual recognition epitopes on the surface of purple membranes.

We employed magnetic ACmode atomic force microscopy (MACmode AFM) as a novel dynamic force microscopy method to image surfaces of biological membranes in their native environments. The lateral resolution achieved under optimized imaging conditions was in the nanometer range, even when the sample was only weakly attached to the support. Purple membranes (PM) from Halobacterium salinarum were used as a test standard for topographical imaging. The hexagonal arrangement of the bacteriorhodopsin trimers on the cytoplasmic side of PM was resolved with 1.5nm lateral accuracy, a resolution similar to images obtained in contact and tapping-mode AFM. Human rhinovirus 2 (HRV2) particles were attached to mica surfaces via nonspecific interactions. The capsid structure and 2nm sized protein loops of HRV2 were routinely obtained without any displacement of the virus. Globular and filamentous structures on living and fixed endothelial cells were observed with a resolution of 5-20nm. These examples show that MACmode AFM is a favorable method in studying the topography of soft and weakly attached biological samples with high resolution under physiological conditions.

We have established an easy-to-use test system for detecting receptor–ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin–biotin, probably the best characterized receptor–ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG800 diamine was glutarylated, the mono-adduct NH2–PEG–COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin–PEG–COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin–PEG–NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin–biotin recognition events were discriminated from nonspecific tip–mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (

Cytosolic Ca++ induces the shedding of microvesicles and nanovesicles from erythrocytes. Atomic force microscopy was used to determine the sizes of these vesicles and to resolve the patchy, fine structure of the microvesicle membrane. The vesicles are highly enriched in glycosyl phosphatidylinositol–linked proteins, free of cytoskeletal components, and depleted of the major transmembrane proteins. Both types of vesicles contain 2 as-yet-unrecognized red cell proteins, synexin and sorcin, which translocate from the cytosol to the membrane upon Ca++ binding. In nanovesicles, synexin and sorcin are the most abundant proteins after hemoglobin. In contrast, the microvesicles are highly enriched in stomatin. The membranes of both microvesicles and nanovesicles contain lipid rafts. Stomatin is the major protein of the microvesicular lipid rafts, whereas synexin and sorcin represent the major proteins of the nanovesicular rafts in the presence of Ca++. Interestingly, the raft proteins flotillin-1 and flotillin-2 are not found in the vesicles but remain in the red cell membrane. These data indicate the presence of different types of lipid rafts in the erythrocyte membrane with distinct fates after Ca++ entry. Synexin, which is known to be vital to the process of membrane fusion, is suggested to be a key component in the process of vesicle release from erythrocytes.

T cells screen the surfaces of antigen presenting cells (APC) for peptides originating from potentially harmful foreign matter in order to trigger an immunological response if necessary. The pivotal interaction in this process takes place between the T cell receptor (TCR) and peptide-presenting MHC (pMHC) complexes. It enables the T cell to detect even very subtle differences in the antigenic peptides while at the same time only very low densities of agonistic pMHCs are required to cause T cell signaling. Little is known about the precise mechanisms behind this exceptional sensitivity and specificity, but recent findings suggest that mechanical forces play an important role.In order to gain further insights, we develop a force sensor for insertion in the immunological synapse, the site of interaction between T cells and APCs. A short peptide forms the core of this sensor, acting as a molecular spring. Depending on the amount of force exerted by the cells, the end-to-end distance of the peptide will change. The peptide carries one fluorophore at each end, chosen such that the fluorophores constitute a FRET pair. Therefore the change in distance can be detected with nanometer precision by means of fluorescence microscopy.After calibration of the sensor, we will have a tool that will enable us, among other things, to measure molecular forces between T cells and APCs, to correlate forces and T cell activation, and to create high resolution force maps of the immunological synapse. Preliminary data demonstrating the validity of the approach will be presented.

Many membrane and secretory proteins are translocated across the endoplasmic reticulum membrane or the bacterial/archaeal plasma membrane through a conserved channel, the Sec61 or the SecYEG complex, respectively. In post-translational translocation the SecYEG channel associates with the cytoplasmic motor protein SecA to deliver secretory proteins to the periplasm. In this study we characterized the binding of SecA to SecYEG at the single molecule level. For our AFM measurements, a sandwich structure was established that consisted of a mica-supported lipid bilayer containing biotinylated lipids, followed by a streptavidin layer, and SecYEG reconstituted into planar lipid bilayers, also containing biotinylated lipids. By covalently coupling SecA to AFM cantilevers we performed combined recognition imaging and force spectroscopy experiments. By varying the loading rate we obtained information on interaction forces, energy landscapes and kinetic rate-constants of the bond formed between SecA and SecYEG. No significant differences were observed in the presence and absence of ATP. In contrast, SecA only binds in the presence of ATP to SecYEG in detergent. This observation suggests that ATP and the lipid bilayer might induce similar conformational changes in SecA. However, ATP did not restore binding of a N-terminal deletion mutant of SecA to either pure lipid bilayers or reconstituted SecYEG, raising the possibility that SecYEG¯s binding interface adopts different conformations in detergent and the lipid environment. This work is supported by the Austrian Science Fund (FWF), no.W1250-B200.

Background and Purpose Insulin stimulates the transport of glucose in target tissues by triggering the translocation of glucose transporter 4 (GLUT4) to the plasma membrane. Resistance to insulin, the major abnormality in type 2 diabetes, results in a decreased GLUT4 translocation efficiency. Thus, special attention is being paid to search for compounds that are able to enhance this translocation process in the absence of insulin. Experimental Approach Total internal reflection fluorescence (TIRF) microscopy was applied to quantify GLUT4 translocation in highly insulin-sensitive CHO-K1 cells expressing a GLUT4-myc-GFP fusion protein. Key Results Using our approach, we demonstrated GLUT4 translocation modulatory properties of selected substances and identified novel potential insulin mimetics. An increase in the TIRF signal was found to correlate with an elevated glucose uptake. Variations in the expression level of the human insulin receptor (hInsR) showed that the insulin mimetics identified stimulate GLUT4 translocation by a mechanism that is independent of the presence of the hInsR. Conclusions and Implications Taken together, the results indicate that TIRF microscopy is an excellent tool for the quantification of GLUT4 translocation and for identifying insulin mimetic drugs.