Search

Enzymatic oligonucleotide synthesis methods based on the template-independent polymerase terminal deoxynucleotidyl transferase (TdT) promise to enable the de novo synthesis of long oligonucleotides under mild, aqueous conditions. Intermediates with a 3′ terminal structure (hairpins) will inevitably arise during synthesis, but TdT has poor activity on these structured substrates, limiting its usefulness for oligonucleotide synthesis. Here, we described two parallel efforts to improve the activity of TdT on hairpins: (1) optimization of the concentrations of the divalent cation cofactors and (2) engineering TdT for enhanced thermostability, enabling reactions at elevated temperatures. By combining both of these improvements, we obtained a ~10-fold increase in the elongation rate of a guanine-cytosine hairpin.

Climate change necessitates the development of CO2 neutral or negative routes to chemicals currently produced from fossil carbon. In this paper we demonstrate a pathway from the renewable resource glucose to next generation biofuel isopentanol by pairing the isovaleryl-CoA biosynthesis pathway from Myxococcus xanthus and a butyryl-CoA reductase from Clostridium acetobutylicum. The best plasmid and Escherichia coli strain combination makes 80.50 ± 8.08 (SD) mg/L of isopentanol after 36 h under microaerobic conditions with an oleyl alcohol overlay. In addition, the system also shows a strong preference for isopentanol production over prenol in microaerobic conditions. Finally, the pathway requires zero adenosine triphosphate and can be paired theoretically with nonoxidative glycolysis, the combination being redox balanced from glucose thus avoiding unnecessary carbon loss as CO2. These pathway properties make the isovaleryl-CoA pathway an attractive isopentanol production route for further optimization.

Bacteria often possess alternative sigma factors that initiate the transcription of specific genes under environmental stresses, the largest and most diverse group being the extracytoplasmic function (ECF) sigma factors. The regulation of ECF activity is crucial for ensuring the distinct transcription of stress responsive genes only occurs under the appropriate conditions. While most ECFs are comprised of only the core σ2 and σ4 regions, a unique form of ECF sigma factor regulation also contains a C-terminal extension bearing homology to the NTF2 superfamily of protein domains. While previous work has shown that this NTF2 domain can affect transcriptional activity in vivo in ECF41 and ECF42, its role in the newly classified ECF56 subgroup is unknown. In this work, we show that truncation of the C-terminus of the ECF56 sigma factor SVEN_4562 of Streptomyces venezuelae upregulates its activity in a hybrid assay. Through transcriptomics in S. venezuelae, we found that this truncated ECF56 sigma factor has a highly conserved promoter sequence in vivo. Bioinformatic assays illustrated that deep branches of the Actinobacteria phylum contained putative ECF56 promoter motifs identical to those found in the S. venezuelae ECF56 regulon. We validated these findings through ex situ hybrid assays illustrating that truncated ECF56 sigma factors from phylogenetically diverse Actinobacteria activate transcription from these promoters. Importantly, our work shows that the genetic infrastructure of the ECF56 family of sigma factors is highly conserved and performs important functions yet to be understood in Actinobacteria.ImportanceMost ECF sigma-factors rely on anti-sigma factor regulation; in contrast, the unique classes of ECF sigma-factors that contain a C-terminal extension are thought to respond directly to an environmental signal. Here we show that the cis-acting regulatory element of the ECF56 regulon is likely highly conserved in many Actinobacteria, with exact nucleotide level conservation over ~2 billion years of evolution. The high conservation of this genetic architecture, as well as a conserved gene content within the regulon, strongly point to a specialized and important role in Actinobacteria biology.

Background Next generation sequencing (NGS) has become a universal practice in modern molecular biology. As the throughput of sequencing experiments increases, the preparation of conventional multiplexed libraries becomes more labor intensive. Conventional library preparation typically requires quality control (QC) testing for individual libraries such as amplification success evaluation and quantification, none of which occur until the end of the library preparation process. Results In this study, we address the need for a more streamlined high-throughput NGS workflow by tethering real-time quantitative PCR (qPCR) to conventional workflows to save time and implement single tube and single reagent QC. We modified two distinct library preparation workflows by replacing PCR and quantification with qPCR using SYBR Green I. qPCR enabled individual library quantification for pooling in a single tube without the need for additional reagents. Additionally, a melting curve analysis was implemented as an intermediate QC test to confirm successful amplification. Sequencing analysis showed comparable percent reads for each indexed library, demonstrating that pooling calculations based on qPCR allow for an even representation of sequencing reads. To aid the modified workflow, a software toolkit was developed and used to generate pooling instructions and analyze qPCR and melting curve data. Conclusions We successfully applied fluorescent amplification for next generation sequencing (FA-NGS) library preparation to both plasmids and bacterial genomes. As a result of using qPCR for quantification and proceeding directly to library pooling, the modified library preparation workflow has fewer overall steps. Therefore, we speculate that the FA-NGS workflow has less risk of user error. The melting curve analysis provides the necessary QC test to identify and troubleshoot library failures prior to sequencing. While this study demonstrates the value of FA-NGS for plasmid or gDNA libraries, we speculate that its versatility could lead to successful application across other library types.

Naturally occurring lactams, such as the polyketide-derived macrolactams, provide a diverse class of natural products that could enhance existing chemically produced lactams. Although β-amino acid loading in the fluvirucin B2 polyketide pathway was proposed by a previously identified putative biosynthetic gene cluster, biochemical characterization of the complete loading enzymes has not been described. Here we elucidate the complete biosynthetic pathway of the β-amino acid loading pathway in fluvirucin B2 biosynthesis. We demonstrate the promiscuity of the loading pathway to utilize a range of amino acids and further illustrate the ability to introduce non-native acyl transferases to selectively transfer β-amino acids onto a polyketide synthase (PKS) loading platform. The results presented here provide a detailed biochemical description of β-amino acid selection and will further aid in future efforts to develop engineered lactam-producing PKS platforms.

The Design-Build-Test-Learn (DBTL) cycle, facilitated by exponentially improving capabilities in synthetic biology, is an increasingly adopted metabolic engineering framework that represents a more systematic and efficient approach to strain development than historical efforts in biofuels and biobased products. Here, we report on implementation of two DBTL cycles to optimize 1-dodecanol production from glucose using 60 engineered Escherichia coli MG1655 strains. The first DBTL cycle employed a simple strategy to learn efficiently from a relatively small number of strains (36), wherein only the choice of ribosome-binding sites and an acyl-ACP/acyl-CoA reductase were modulated in a single pathway operon including genes encoding a thioesterase (UcFatB1), an acyl-ACP/acyl-CoA reductase (Maqu_2507, Maqu_2220, or Acr1), and an acyl-CoA synthetase (FadD). Measured variables included concentrations of dodecanol and all proteins in the engineered pathway. We used the data produced in the first DBTL cycle to train several machine-learning algorithms and to suggest protein profiles for the second DBTL cycle that would increase production. These strategies resulted in a 21% increase in dodecanol titer in Cycle 2 (up to 0.83 g/L, which is more than 6-fold greater than previously reported batch values for minimal medium). Beyond specific lessons learned about optimizing dodecanol titer in E. coli, this study had findings of broader relevance across synthetic biology applications, such as the importance of sequencing checks on plasmids in production strains as well as in cloning strains, and the critical need for more accurate protein expression predictive tools.

pSC101 is a narrow host range, low-copy plasmid commonly used for genetically manipulating Escherichia coli. As a byproduct of a genetic screen for a more sensitive lactam biosensor, we identified multiple novel mutations that increase the copy number of plasmids with the pSC101 origin. All mutations identified in this study occurred on plasmids which also contained at least one mutation localized to the RepA protein encoded within the origin. Homology modelling predicts that many of these mutations occur within the dimerization interface of RepA. Mutant RepA resulted in plasmid copy numbers between ~31 and ~113 copies/cell, relative to ~5 copies/cell in wild-type pSC101 plasmids. Combining the mutations that were predicted to disrupt multiple contacts on the dimerization interface resulted in copy numbers of ~500 copies/cell, while also attenuating growth in host strains. Fluorescent protein production expressed from an arabinose-inducible promoter on mutant origin derived plasmids did correlate with copy number. Plasmids harboring RepA with one of two mutations, E83K and N99D, resulted in fluorescent protein production similar to that from p15a- (~20 copies/cell) and ColE1- (~31 copies/cell) based plasmids, respectively. The mutant copy number variants retained compatibility with p15a, pBBR, and ColE1 origins of replication. These pSC101 variants may be useful in future metabolic engineering efforts that require medium or high-copy vectors compatible with p15a- and ColE1-based plasmids.

Robust fermentation of biomass-derived sugars into bioproducts demands the reliable microbial expression of metabolic pathways. Plasmid-based expression systems may suffer from instability and result in highly variable titers, rates, and yields. An established mitigation approach, Chemical Induced Chromosomal Expansion (CIChE), expands a singly integrated pathway to plasmid-like copy numbers, while maintaining stability in the absence of antibiotic selection pressure. Here, we report Parallel Integration and Chromosomal Expansion (PIACE), extensions to CIChE that enable independent expansions of pathway components across multiple loci, use suicide vectors to achieve high-efficiency site-specific integration of sequence-validated multi-gene components, and introduce a heat-curable plasmid to obviate recA deletion post pathway expansion. We applied PIACE to stabilize an isopentenol pathway across three loci in E. coli DH1, and to then generate libraries of pathway component copy-number variants to screen for improved titers. Polynomial regressor statistical modeling of the production screening data suggests that increasing copy numbers of all isopentenol pathway components would further improve titers.

© 2017 The Authors. Yeast published by John Wiley & Sons, Ltd. Despite the need for inducible promoters in strain development efforts, the majority of engineering in Saccharomyces cerevisiae continues to rely on a few constitutively active or inducible promoters. Building on advances that use the modular nature of both transcription factors and promoter regions, we have built a library of hybrid promoters that are regulated by a synthetic transcription factor. The hybrid promoters consist of native S. cerevisiae promoters, in which the operator regions have been replaced with sequences that are recognized by the bacterial LexA DNA binding protein. Correspondingly, the synthetic transcription factor (TF) consists of the DNA binding domain of the LexA protein, fused with the human estrogen binding domain and the viral activator domain, VP16. The resulting system with a bacterial DNA binding domain avoids the transcription of native S. cerevisiae genes, and the hybrid promoters can be induced using estradiol, a compound with no detectable impact on S. cerevisiae physiology. Using combinations of one, two or three operator sequence repeats and a set of native S. cerevisiae promoters, we obtained a series of hybrid promoters that can be induced to different levels, using the same synthetic TF and a given estradiol. This set of promoters, in combination with our synthetic TF, has the potential to regulate numerous genes or pathways simultaneously, to multiple desired levels, in a single strain.

Targeted proteomics is a convenient method determining enzyme expression levels, but a quantitative analysis of these proteomic data has not been fully explored yet. Here, we present and demonstrate a computational tool (principal component analysis of proteomics, PCAP) that uses quantitative targeted proteomics data to guide metabolic engineering and achieve higher production of target molecules from heterologous pathways. The method is based on the application of principal component analysis to a collection of proteomics and target molecule production data to pinpoint specific enzymes that need to have their expression level adjusted to maximize production. We illustrated the method on the heterologous mevalonate pathway in Escherichia coli that produces a wide range of isoprenoids and requires balanced pathway gene expression for high yields and titers. PCAP-guided engineering resulted in over a 40% improvement in the production of two valuable terpenes. PCAP could potentially be productively applied to other heterologous pathways as well.

Oligonucleotides are almost exclusively synthesized using the nucleoside phosphoramidite method, even though it is limited to the direct synthesis of ∼200 mers and produces hazardous waste. Here, we describe an oligonucleotide synthesis strategy that uses the template-independent polymerase terminal deoxynucleotidyl transferase (TdT). Each TdT molecule is conjugated to a single deoxyribonucleoside triphosphate (dNTP) molecule that it can incorporate into a primer. After incorporation of the tethered dNTP, the 3' end of the primer remains covalently bound to TdT and is inaccessible to other TdT-dNTP molecules. Cleaving the linkage between TdT and the incorporated nucleotide releases the primer and allows subsequent extension. We demonstrate that TdT-dNTP conjugates can quantitatively extend a primer by a single nucleotide in 10-20 s, and that the scheme can be iterated to write a defined sequence. This approach may form the basis of an enzymatic oligonucleotide synthesizer.

© 2016 The Author(s). Despite the extensive use of Saccharomyces cerevisiae as a platform for synthetic biology, strain engineering remains slow and laborious. Here, we employ CRISPR/Cas9 technology to build a cloning-free toolkit that addresses commonly encountered obstacles in metabolic engineering, including chromosomal integration locus and promoter selection, as well as protein localization and solubility. The toolkit includes 23 Cas9-sgRNA plasmids, 37 promoters of various strengths and temporal expression profiles, and 10 protein-localization, degradation and solubility tags. We facilitated the use of these parts via a web-based tool, that automates the generation of DNA fragments for integration. Our system builds upon existing gene editing methods in the thoroughness with which the parts are standardized and characterized, the types and number of parts available and the ease with which our methodology can be used to perform genetic edits in yeast. We demonstrated the applicability of this toolkit by optimizing the expression of a challenging but industrially important enzyme, taxadiene synthase (TXS). This approach enabled us to diagnose an issue with TXS solubility, the resolution of which yielded a 25-fold improvement in taxadiene production.

Ralstonia eutropha is a facultatively chemolithoautotrophic bacterium able to grow with organic substrates or H 2 and CO 2 under aerobic conditions. Under conditions of nutrient imbalance, R. eutropha produces copious amounts of poly[( R )-3-hydroxybutyrate] (PHB). Its ability to utilize CO 2 as a sole carbon source renders it an interesting new candidate host for the production of renewable liquid transportation fuels. We engineered R. eutropha for the production of fatty acid-derived, diesel-range methyl ketones. Modifications engineered in R. eutropha included overexpression of a cytoplasmic version of the TesA thioesterase, which led to a substantial (>150-fold) increase in fatty acid titer under certain conditions. In addition, deletion of two putative β-oxidation operons and heterologous expression of three genes (the acyl coenzyme A oxidase gene from Micrococcus luteus and fadB and fadM from Escherichia coli ) led to the production of 50 to 65 mg/liter of diesel-range methyl ketones under heterotrophic growth conditions and 50 to 180 mg/liter under chemolithoautotrophic growth conditions (with CO 2 and H 2 as the sole carbon source and electron donor, respectively). Induction of the methyl ketone pathway diverted substantial carbon flux away from PHB biosynthesis and appeared to enhance carbon flux through the pathway for biosynthesis of fatty acids, which are the precursors of methyl ketones.

We present a water-in-oil droplet microfluidic platform for transformation, culture and expression of recombinant proteins in multiple host organisms including bacteria, yeast and fungi. The platform consists of a hybrid digital microfluidic/channel-based droplet chip with integrated temperature control to allow complete automation and integration of plasmid addition, heat-shock transformation, addition of selection medium, culture, and protein expression. The microfluidic format permitted significant reduction in consumption (100-fold) of expensive reagents such as DNA and enzymes compared to the benchtop method. The chip contains a channel to continuously replenish oil to the culture chamber to provide a fresh supply of oxygen to the cells for long-term (∼5 days) cell culture. The flow channel also replenished oil lost to evaporation and increased the number of droplets that could be processed and cultured. The platform was validated by transforming several plasmids into Escherichia coli including plasmids containing genes for fluorescent proteins GFP, BFP and RFP; plasmids with selectable markers for ampicillin or kanamycin resistance; and a Golden Gate DNA assembly reaction. We also demonstrate the applicability of this platform for transformation in widely used eukaryotic organisms such as Saccharomyces cerevisiae and Aspergillus niger. Duration and temperatures of the microfluidic heat-shock procedures were optimized to yield transformation efficiencies comparable to those obtained by benchtop methods with a throughput up to 6 droplets/min. The proposed platform offers potential for automation of molecular biology experiments significantly reducing cost, time and variability while improving throughput.

© 2016 Javidpour et al.This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Ladderanes are hydrocarbon chains with three or five linearly concatenated cyclobutane rings that are uniquely produced as membrane lipid components by anammox (anaerobic ammonia-oxidizing) bacteria. By virtue of their angle and torsional strain, ladderanes are unusually energetic compounds, and if produced biochemically by engineered microbes, could serve as renewable, high-energy-density jet fuel components. The biochemistry and genetics underlying the ladderane biosynthetic pathway are unknown, however, previous studies have identified a pool of 34 candidate genes from the anammox bacterium, Kuenenia stuttgartiensis, some or all of which may be involved with ladderane fatty acid biosynthesis. The goal of the present study was to establish a systematic means of testing the candidate genes from K. stuttgartiensis for involvement in ladderane biosynthesis through heterologous expression in E. coli under anaerobic conditions. This study describes an efficient means of assembly of synthesized, codon-optimized candidate ladderane biosynthesis genes in synthetic operons that allows for changes to regulatory element sequences, as well as modular assembly of multiple operons for simultaneous heterologous expression in E. coli (or potentially other microbial hosts). We also describe in vivo functional tests of putative anammox homologs of the phytoene desaturase CrtI, which plays an important role in the hypothesized ladderane pathway, and a method for soluble purification of one of these enzymes. This study is, to our knowledge, the first experimental effort focusing on the role of specific anammox genes in the production of ladderanes, and lays the foundation for future efforts toward determination of the ladderane biosynthetic pathway. Our substantial, but far from comprehensive, efforts at elucidating the ladderane biosynthetic pathway were not successful. We invite the scientific community to take advantage of the considerable synthetic biology resources and experimental results developed in this study to elucidate the biosynthetic pathway that produces unique and intriguing ladderane lipids.

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual., This Community Page introduces SBOL Visual—a standard visual language for DNA design and synthetic biology. Researchers are encouraged to download the symbols, use them freely, and suggest additions.

Bacterial cells are highly organized with many protein complexes and DNA loci dynamically positioned to distinct subcellular sites over the course of a cell cycle. Such dynamic protein localization is essential for polar organelle development, establishment of asymmetry, and chromosome replication during the Caulobacter crescentus cell cycle. We used a fluorescence microscopy screen optimized for high-throughput to find strains with anomalous temporal or spatial protein localization patterns in transposon-generated mutant libraries. Automated image acquisition and analysis allowed us to identify genes that affect the localization of two polar cell cycle histidine kinases, PleC and DivJ, and the pole-specific pili protein CpaE, each tagged with a different fluorescent marker in a single strain. Four metrics characterizing the observed localization patterns of each of the three labeled proteins were extracted for hundreds of cell images from each of 854 mapped mutant strains. Using cluster analysis of the resulting set of 12-element vectors for each of these strains, we identified 52 strains with mutations that affected the localization pattern of the three tagged proteins. This information, combined with quantitative localization data from epitasis experiments, also identified all previously known proteins affecting such localization. These studies provide insights into factors affecting the PleC/DivJ localization network and into regulatory links between the localization of the pili assembly protein CpaE and the kinase localization pathway. Our high-throughput screening methodology can be adapted readily to any sequenced bacterial species, opening the potential for databases of localization regulatory networks across species, and investigation of localization network phylogenies.

© 2015 American Chemical Society. New microbes are being engineered that contain the genetic circuitry, metabolic pathways, and other cellular functions required for a wide range of applications such as producing biofuels, biobased chemicals, and pharmaceuticals. Although currently available tools are useful in improving the synthetic biology process, further improvements in physical automation would help to lower the barrier of entry into this field. We present an innovative microfluidic platform for assembling DNA fragments with 10× lower volumes (compared to that of current microfluidic platforms) and with integrated region-specific temperature control and on-chip transformation. Integration of these steps minimizes the loss of reagents and products compared to that with conventional methods, which require multiple pipetting steps. For assembling DNA fragments, we implemented three commonly used DNA assembly protocols on our microfluidic device: Golden Gate assembly, Gibson assembly, and yeast assembly (i.e., TAR cloning, DNA Assembler). We demonstrate the utility of these methods by assembling two combinatorial libraries of 16 plasmids each. Each DNA plasmid is transformed into Escherichia coli or Saccharomyces cerevisiae using on-chip electroporation and further sequenced to verify the assembly. We anticipate that this platform will enable new research that can integrate this automated microfluidic platform to generate large combinatorial libraries of plasmids and will help to expedite the overall synthetic biology process.

Functionalization of bacterial cell surfaces has the potential to introduce new activities by chemical modification. Here we show that a bacteriophage-receptor complex can be used to functionalize the surface of two Gram-negative proteobacteria, Escherichia coli and Ralstonia eutropha with CdSe/ZnS nanoparticles. This work highlights the potential for using microbe-phage interactions to generate new functions on living cells.

Nonribosomal peptide synthetases (NRPS), fatty acid synthases (FAS), and polyketide sythases (PKS) are multimodular enzymatic assembly lines utilized in natural product biosynthesis. Previous data on FAS and PKS subunits have indicated that they are homodimers and that some of their catalytic functions can work in trans. When NRPS assembly lines have been probed for comparable formation of stable oligomers, no evidence had been forthcoming that species other than monomer forms were active. In this work we focus on the six-domain (Cy1-Cy2-A-C1-PCP-C2) enzyme VibF from the vibriobactin synthetase assembly line, which contains three other proteins, VibB, VibE, and VibH, that--when purified and mixed with VibF and the substrates ATP, threonine, 2,3-dihydroxybenzoate (DHB), and norspermidine--produce the iron chelator vibriobactin. Using a deletion of the Cy1 domain and separate inactivating mutations in the Cy2, A, PCP, and C2 domains of VibF, we report regain of catalytic activity upon mutant protein mixing that argues for heterodimer formation, stable for hundreds to thousands of catalytic cycles, with acyl chain processing and transfer around blocked domains. Ultracentrifugation data likewise confirm a dimeric structure for VibF and establish that domains within NRPS dimeric modules can act on acyl chains in trans. The results described here are the first indication for an NRPS subunit that homodimerization can occur and that there is a continuum of functional oligomerization states between monomers and dimers in nonribosomal peptide synthetases.

Yersiniabactin synthetase comprises four proteins, YbtE, HMWP1, HMWP2, and YbtU, encompassing seventeen functional domains, twelve catalytic and five carrier, to select, activate, and incorporate salicylate, three cysteines, and one malonyl moiety into the iron chelator yersiniabactin (Ybt). In the present study, yersiniabactin has been reconstituted in vitro from the 4 protein assembly line by the use of eight biosynthetic precursors. The rate of one turnover, comprising 22 chemical operations performed by the assembly line to release the completed Ybt molecule, was determined at 1.4 min(-1). During the course of Ybt production, the elongating acyl-S-enzyme chain was shown to transfer across a nonribosomal peptide synthetase/polyketide synthase (NRPS/PKS) interprotein interface and then a PKS/NRPS intraprotein interface. This study on the Ybt synthetase assembly line represents the first complete in vitro reconstitution of a nonribosomal peptide/polyketide hybrid system.

We are developing a laboratory-scale model to improve our understanding and capacity to assess the biological risks of genetically engineered bacteria and their genetic elements in the natural environment. Our hypothetical scenario concerns an industrial bioreactor failure resulting in the introduction of genetically engineered bacteria to a downstream municipal wastewater treatment plant (MWWTP). As the first step towards developing a model for this scenario, we sampled microbial communities from the aeration basin of a MWWTP at three seasonal time points. Having established a baseline for community composition, we investigated how the community changed when propagated in the laboratory, including cell culture media conditions that could provide selective pressure in future studies. Specifically, using PhyloChip 16S-rRNA-gene targeting microarrays, we compared the compositions of sampled communities to those of inocula propagated in the laboratory in simulated wastewater conditionally amended with various carbon sources (glucose, chloroacetate, D-threonine) or the ionic liquid 1-ethyl-3-methylimidazolium chloride ([C2mim]Cl). Proteobacteria , Bacteroidetes, and Actinobacteria were predominant in both aeration basin and laboratory-cultured communities. Laboratory-cultured communities were enriched in γ-Proteobacteria. Enterobacteriaceae, and Aeromonadaceae were enriched by glucose, Pseudomonadaceae by chloroacetate and D-threonine, and Burkholderiacea by high (50 mM) concentrations of chloroacetate. Microbial communities cultured with chloroacetate and D-threonine were more similar to sampled field communities than those cultured with glucose or [C2mim]Cl. Although observed relative richness in operational taxonomic units (OTUs) was lower for laboratory cultures than for field communities, both flask and reactor systems supported phylogenetically diverse communities. These results importantly provide a foundation for laboratory models of industrial bioreactor failure scenarios. © 2014 Lee et al.

The glycosyltransferases (GTs) are an important and functionally diverse family of enzymes involved in glycan and glycoside biosynthesis. Plants have evolved large families of GTs which undertake the array of glycosylation reactions that occur during plant development and growth. Based on the Carbohydrate-Active enZymes (CAZy) database, the genome of the reference plant Arabidopsis thaliana codes for over 450 GTs, while the rice genome (Oryza sativa) contains over 600 members. Collectively, GTs from these reference plants can be classified into over 40 distinct GT families. Although these enzymes are involved in many important plant specific processes such as cell-wall and secondary metabolite biosynthesis, few have been functionally characterized. We have sought to develop a plant GTs clone resource that will enable functional genomic approaches to be undertaken by the plant research community. In total, 403 (88%) of CAZy defined Arabidopsis GTs have been cloned, while 96 (15%) of the GTs coded by rice have been cloned. The collection resulted in the update of a number of Arabidopsis GT gene models. The clones represent full-length coding sequences without termination codons and are Gateway® compatible. To demonstrate the utility of this JBEI GT Collection, a set of efficient particle bombardment plasmids (pBullet) was also constructed with markers for the endomembrane. The utility of the pBullet collection was demonstrated by localizing all members of the Arabidopsis GT14 family to the Golgi apparatus or the endoplasmic reticulum (ER). Updates to these resources are available at the JBEI GT Collection website http://www.addgene.org/.

We report an all-in-one platform - ScanDrop - for the rapid and specific capture, detection, and identification of bacteria in drinking water. The ScanDrop platform integrates droplet microfluidics, a portable imaging system, and cloud-based control software and data storage. The cloud-based control software and data storage enables robotic image acquisition, remote image processing, and rapid data sharing. These features form a "cloud" network for water quality monitoring. We have demonstrated the capability of ScanDrop to perform water quality monitoring via the detection of an indicator coliform bacterium, Escherichia coli, in drinking water contaminated with feces. Magnetic beads conjugated with antibodies to E. coli antigen were used to selectively capture and isolate specific bacteria from water samples. The bead-captured bacteria were co-encapsulated in pico-liter droplets with fluorescently-labeled anti-E. coli antibodies, and imaged with an automated custom designed fluorescence microscope. The entire water quality diagnostic process required 8 hours from sample collection to online-accessible results compared with 2-4 days for other currently available standard detection methods. © 2014 Golberg et al.

Background: The chemoautotrophic bacterium Ralstonia eutropha can utilize H2/CO2 for growth under aerobic conditions. While this microbial host has great potential to be engineered to produce desired compounds (beyond polyhydroxybutyrate) directly from CO2, little work has been done to develop genetic part libraries to enable such endeavors. Results: We report the development of a toolbox for the metabolic engineering of Ralstonia eutropha H16. We have constructed a set of broad-host-range plasmids bearing a variety of origins of replication, promoters, 5' mRNA stem-loop structures, and ribosomal binding sites. Specifically, we analyzed the origins of replication pCM62 (IncP), pBBR1, pKT (IncQ), and their variants. We tested the promoters PBAD, T7, Pxyls/PM, PlacUV5, and variants thereof for inducible expression. We also evaluated a T7 mRNA stem-loop structure sequence and compared a set of ribosomal binding site (RBS) sequences derived from Escherichia coli, R. eutropha, and a computational RBS design tool. Finally, we employed the toolbox to optimize hydrocarbon production in R. eutropha and demonstrated a 6-fold titer improvement using the appropriate combination of parts.Conclusion: We constructed and evaluated a versatile synthetic biology toolbox for Ralstonia eutropha metabolic engineering that could apply to other microbial hosts as well. © 2013 Bi et al.; licensee BioMed Central Ltd.

Synthetic biology is a nascent field that emerged in earnest only around the turn of the millennium. It aims to engineer new biological systems and impart new biological functionality, often through genetic modifications. The design and construction of new biological systems is a complex, multistep process, requiring multidisciplinary collaborative efforts from "fusion" scientists who have formal training in computer science or engineering, as well as hands-on biological expertise. The public has high expectations for synthetic biology and eagerly anticipates the development of solutions to the major challenges facing humanity. This article discusses laboratory practices and the conduct of research in synthetic biology. It argues that the fusion science approach, which integrates biology with computer science and engineering best practices, including standardization, process optimization, computer-aided design and laboratory automation, miniaturization, and systematic management, will increase the predictability and reproducibility of experiments and lead to breakthroughs in the construction of new biological systems. The article also discusses several successful fusion projects, including the development of software tools for DNA construction design automation, recursive DNA construction, and the development of integrated microfluidics systems.

The Caulobacter cell cycle progresses through a series of consecutive stages: the differentiation of a swarmer cell into a stalked cell, the initiation of chromosome replication, the onset of remodeling of the new cell pole, segregation of the newly replicated chromosomes, flagellum biogenesis, and cell division (6, 27, 32, 38). Cell cycle and polar differentiation events are interdependent processes, and checkpoints are in place to ensure that both cell cycle and differentiation processes are completed before the next stage is initiated (27, 54). The orchestrated coordination of cell cycle events results in the formation of two distinct cell types, a motile swarmer cell and a sessile stalked cell. The swarmer cell has a single polar flagellum, several polar pili, and a polar chemotaxis complex. As Caulobacter moves through the cell cycle, the cell poles undergo critical remodeling (see Fig. ​Fig.6A).6A). The flagellum and pili are lost, and a stalk grows at that pole, thereafter maintaining a stalked pole identity (6, 26). Subsequently, the pole opposite the stalk eventually acquires a flagellum, pili, and chemotaxis proteins. FIG. 6. Initiation of DnaA replication controls new pole remodeling and CckA kinase activation required for cell cycle progression. (A) Schematic of the Caulobacter cell cycle in a wild-type strain. The flagellum-bearing swarmer cell possesses a single chromosome ... In Caulobacter, if the initiation of DNA replication is inhibited, many temporally controlled events fail to occur. These include flagellum biosynthesis, synthesis of the CcrM DNA methyltransferase, and cell division (10, 11, 47, 48, 54). The essential CtrA response regulator, in its phosphorylated state, is central to the regulation of these cell cycle events. Flagellar genes, grouped in a complex regulatory hierarchy, are expressed sequentially; the order of expression corresponds to the order of assembly of the gene products into the growing flagellum. The expression of the class IV flagellar genes requires the previous expression of the class III genes, and this requires the expression of the class II flagellar genes (26, 56). CtrA functions as a class I gene controlling the transcription of class II flagellar genes (39, 57). CtrA also controls cytokinesis by regulating the expression of genes encoding essential components of cell division apparatus, including FtsZ, FtsA, and FtsQ (30, 54). In addition, CtrA activates the transcription of genes involved in chemotaxis, chromosome methylation, and pilus formation (29, 41, 45). In the swarmer cell, CtrA is in the active phosphorylated state, where it binds to the origin of replication and blocks the initiation of replication (12, 40). Upon differentiation of a swarmer cell into a stalked cell (12), CtrA is cleared from the cell, allowing replication to begin. After DNA replication has initiated, CtrA accumulates and is activated by phosphotransfer from the essential CckA hybrid kinase through the ChpT phosphotransferase (3, 23). It has been shown that the accumulation of CtrA requires the initiation of DNA replication (54). The expression of ctrA is under the control of two promoters, P1 and P2. P1 is a weak promoter that is active only in the late stalked cell, following the initiation of DNA replication (13). In a positive feedback loop, phosphorylated CtrA activates the strong ctrA P2 promoter in the late predivisional cell (13). It was shown that if DNA replication is inhibited, CtrA is depleted due to the inhibition of the ctrA P2 promoter (54). Because the activation of the P2 promoter requires CtrA in its phosphorylated state, the activation of the CckA phospho-signaling pathway may be the primary responder to a DNA replication checkpoint. The subcellular localization of CckA changes during the cell cycle; it accumulates at the cell poles following DNA replication initiation (2, 24). We have recently shown that CckA is autophosphorylated and activated when localized at the new cell pole (20). In addition, we demonstrated that CckA autophosphorylation, activation, and localization at the new pole is dependent on the essential DivL protein kinase, which predominantly localizes at the new pole in the same protein complex with CckA (20). Because polar localization of DivL and CckA occurs following replication initiation, we asked if the initiation of DNA replication is required for the localization of DivL and CckA at the new cell pole and, consequently, for CckA phosphorylation and activation. Here, using three different methods to inhibit replication initiation, we demonstrate that the initiation of DNA replication is required for localizing both DivL and CckA at the new cell pole and for CckA autophosphorylation and activation. We ascertained that replication initiation, and not segregation, is the essential element for CckA new pole localization and autophosphorylation. These results argue that the initiation of DNA replication is an important cell cycle requirement for the activation of the CckA hybrid kinase and, consequently, via activated CtrA∼P, the expression of multiple cell cycle events, including flagellum and pilus formation, chemotaxis, DNA methylation, and cell division.

Caulobacter crescentus integrates phospho-signaling pathways and transcription factor regulatory cascades to drive the cell cycle. Despite the essential role of the CckA histidine kinase in the control of cell cycle events, the factors that signal its activation at a specific time in the cell cycle have remained elusive. A conditional genetic screen for CckA mislocalization mutants, using automated fluorescence microscopy and an image processing platform, revealed that the essential DivL protein kinase promotes CckA localization, autophosphorylation, and activity at the new cell pole. The transient accumulation of DivL at the new cell pole, but not its kinase activity, is required for the localization and activation of CckA. Because DivL and CckA accumulate at the same cell pole after the initiation of DNA replication and were found to interact in vivo, we propose that DivL recruits CckA to the pole, thereby promoting its autophosphorylation and activity.

We engineered a strain of the bacterium Caulobacter crescentus to fluoresce in the presence of micromolar levels of uranium at ambient temperatures when it is exposed to a hand-held UV lamp. Previous microarray experiments revealed that several Caulobacter genes are significantly upregulated in response to uranium but not in response to other heavy metals. We designated one of these genes urcA (for u ranium r esponse in c aulobacter). We constructed a reporter that utilizes the urcA promoter to produce a UV-excitable green fluorescent protein in the presence of the uranyl cation, a soluble form of uranium. This reporter is specific for uranium and has little cross specificity for nitrate (Caulobacter reporter strain can provide on-demand usability in the field; it requires minimal sample processing and no equipment other than a hand-held UV lamp, and it may be sprayed directly on soil, groundwater, or industrial surfaces.

Using 62 probe-level datasets obtained with a custom-designed Caulobacter crescentus microarray chip, we identify transcriptional start sites of 769 genes, 53 of which are transcribed from multiple start sites. Transcriptional start sites are identified by analyzing probe signal cross-correlation matrices created from probe pairs tiled every 5 bp upstream of the genes. Signals from probes binding the same message are correlated. The contribution of each promoter for genes transcribed from multiple promoters is identified. Knowing the transcription start site enables targeted searching for regulatory-protein binding motifs in the promoter regions of genes with similar expression patterns. We identified 27 motifs, 17 of which share no similarity to the characterized motifs of other C. crescentus transcriptional regulators. Using these motifs, we predict coregulated genes. We verified novel promoter motifs that regulate stress-response genes, including those responding to uranium challenge, a stress-response sigma factor and a stress-response noncoding RNA.

The epothilones are potent anticancer natural products produced by a polyketide synthase (PKS)-nonribosomal peptide synthetase (NRPS) hybrid involving proteins EpoA-F. The single NRPS module of the epothilone assembly line, EpoB, is a distinct subunit of approximately 160 kDa and consists of four successive domains: cyclization, adenylation, oxidation, and peptidyl carrier protein (Cy-A-Ox-PCP). The cyclization domain is responsible for introduction of the thiazoline heterocycle into the growing polyketide/nonribosomal peptide chain from the precursors malonyl-CoA and cysteine through the multiple steps of condensation, cyclization, and dehydration. This enzyme-bound thiazoline intermediate is subsequently oxidized to a thiazole by the EpoB Ox domain. The EpoB module was dissected to provide 57 kDa EpoB(Cy) and 102 kDa EpoB(A-Ox-PCP) as subunit fragments to evaluate Cy as a free-standing domain. EpoB was reconstituted by these fragments in trans to generate the methylthiazole product. Using this system, apparent kinetic constants for the upstream acyl donor EpoA(ACP) and EpoB(Cy) were determined, providing a measure of affinity for the naturally occurring interface of the amino terminus of EpoB and the EpoA carboxy terminus. Site-directed mutants in excised EpoB(Cy) were prepared and used to examine residues involved in condensation and heterocycle formation. This work demonstrates the ability to define a functional Cy domain by excision from its native NRPS module, and examine both its protein-protein interactions and mechanism of activity.

The Joint BioEnergy Institute Inventory of Composable Elements (JBEI-ICEs) is an open source registry platform for managing information about biological parts. It is capable of recording information about 'legacy' parts, such as plasmids, microbial host strains and Arabidopsis seeds, as well as DNA parts in various assembly standards. ICE is built on the idea of a web of registries and thus provides strong support for distributed interconnected use. The information deposited in an ICE installation instance is accessible both via a web browser and through the web application programming interfaces, which allows automated access to parts via third-party programs. JBEI-ICE includes several useful web browser-based graphical applications for sequence annotation, manipulation and analysis that are also open source. As with open source software, users are encouraged to install, use and customize JBEI-ICE and its components for their particular purposes. As a web application programming interface, ICE provides well-developed parts storage functionality for other synthetic biology software projects. A public instance is available at public-registry.jbei.org, where users can try out features, upload parts or simply use it for their projects. The ICE software suite is available via Google Code, a hosting site for community-driven open source projects. © 2012 The Author(s).

Nonribosomal peptide synthetases (NRPS) are multimodular biocatalysts that bacteria and fungi use to assemble many complex peptides with broad biological activities. The same modular enzymatic assembly line principles are found in fatty acid synthases (FAS), polyketide synthases (PKS), and most recently in hybrid NRPS/PKS multienzymes. FAS as well as PKS are known to function as homodimeric enzyme complexes, raising the question of whether NRPS may also act as homodimers. To test this hypothesis, biophysical methods (size exclusion chromatography, analytical equilibrium ultracentrifugation, and chemical crosslinking) and biochemical methods (two-affinity-tag-system and complementation studies with enzymes being inactivated in different catalytic domains) were applied to NRPS subunits from the gramicidin S (GrsA-ATE), tyrocidine (TycB1-CAT and TycB2-3-AT.CATE), and enterobactin (EntF-CATTe) biosynthetic systems. These methods had revealed the dimeric structure of FAS and PKS previously, but all three NRPS systems investigated are functionally active as monomers.