Search

Ribonucleic acid sequencing can allow us to monitor the RNAs present in a sample. This enables us to detect the presence and nucleotide sequence of viruses, or to build a picture of how active transcriptional processes are changing – information that is useful for understanding the status and function of a sample. Oxford Nanopore Technologies’ sequencing technology is capable of electronically analysing a sample’s DNA directly, and in real-time. In this manuscript we demonstrate the ability of an array of nanopores to sequence RNA directly, and we apply it to a range of biological situations. Nanopore technology is the only available sequencing technology that can sequence RNA directly, rather than depending on reverse transcription and PCR. There are several potential advantages of this approach over other RNA-seq strategies, including the absence of amplification and reverse transcription biases, the ability to detect nucleotide analogues and the ability to generate full-length, strand-specific RNA sequences. Direct RNA sequencing is a completely new way of analysing the sequence of RNA samples and it will improve the ease and speed of RNA analysis, while yielding richer biological information.

The invertebrate cytolysin lysenin is a member of the aerolysin family of pore-forming toxins that includes many representatives from pathogenic bacteria. Here we report the crystal structure of the lysenin pore and provide insights into its assembly mechanism. The lysenin pore is assembled from nine monomers via dramatic reorganization of almost half of the monomeric subunit structure leading to a β-barrel pore ∼10 nm long and 1.6–2.5 nm wide. The lysenin pore is devoid of additional luminal compartments as commonly found in other toxin pores. Mutagenic analysis and atomic force microscopy imaging, together with these structural insights, suggest a mechanism for pore assembly for lysenin. These insights are relevant to the understanding of pore formation by other aerolysin-like pore-forming toxins, which often represent crucial virulence factors in bacteria., Pore-forming toxins act by forming oligomeric pores in lipid membranes. Here the authors report the crystal structure of the lysenin pore, providing insights into the assembly and function of the pore in addition to suggesting that its properties make lysenin potentially well-suited for nanopore sensing applications.

A single-molecule method for sequencing DNA that does not require fluorescent labelling could reduce costs and increase sequencing speeds. An exonuclease enzyme might be used to cleave individual nucleotide molecules from the DNA, and when coupled to an appropriate detection system, these nucleotides could be identified in the correct order. Here, we show that a protein nanopore with a covalently attached adapter molecule can continuously identify unlabelled nucleoside 5'-monophosphate molecules with accuracies averaging 99.8%. Methylated cytosine can also be distinguished from the four standard DNA bases: guanine, adenine, thymine and cytosine. The operating conditions are compatible with the exonuclease, and the kinetic data show that the nucleotides have a high probability of translocation through the nanopore and, therefore, of not being registered twice. This highly accurate tool is suitable for integration into a system for sequencing nucleic acids and for analysing epigenetic modifications. A protein nanopore with a permanent adaptor molecule can continuously identify unlabelled DNA bases with ∼99.8% accuracy. This level of performance could provide the foundation for the development of nanopore-based DNA sequencing technologies that are faster and less expensive than existing approaches.

Staphylococcal alpha-hemolysin (alphaHL) is a beta barrel pore-forming toxin that is secreted by the bacterium as a water-soluble monomeric protein. Upon binding to susceptible cells, alphaHL assembles via an inactive prepore to form a water-filled homoheptameric transmembrane pore. The N terminus of alphaHL, which in the crystal structure of the fully assembled pore forms a latch between adjacent subunits, has been thought to play a vital role in the prepore to pore conversion. For example, the deletion of two N-terminal residues produced a completely inactive protein that was arrested in assembly at the prepore stage. In the present study, we have re-examined assembly with a comprehensive set of truncation mutants. Surprisingly, we found that after truncation of up to 17 amino acids, the ability of alphaHL to form functional pores was diminished, but still substantial. We then discovered that the mutation Ser(217) --> Asn, which was present in our original set of truncations but not in the new ones, promotes complete inactivation upon truncation of the N terminus. Therefore, the N terminus of alphaHL cannot be critical for the prepore to pore transformation as previously thought. Residue 217 is involved in the assembly process and must interact indirectly with the distant N terminus during the last step in pore formation. In addition, we provide evidence that an intact N terminus prevents the premature oligomerization of alphaHL monomers in solution.

The staphylococcal alpha-hemolysin (alphaHL) and leukocidin (Luk) polypeptides are members of a family of related beta-barrel pore-forming toxins. Upon binding to susceptible cells, alphaHL forms water-filled homoheptameric transmembrane pores. By contrast, Luk pores are formed by two classes of subunit, F and S, rendering a heptameric structure displeasing on symmetry grounds at least. Both the subunit stoichiometry and arrangement within the Luk pore have been contentious issues. Here we use chemical and genetic approaches to show that (1) the predominant, or perhaps the only, form of the Luk pore is an octamer; (2) the subunit stoichiometry is 1:1; and (3) the subunits are arranged in an alternating fashion about a central axis of symmetry, at least when a fused LukS-LukF construct is used. The experimental approaches we have used also open up new avenues for engineering the arrangement of the subunits of beta-barrel pore-forming toxins.

Staphylococcal α-hemolysin (αHL) forms a heptameric pore that features a 14-stranded transmembrane β-barrel. We attempted to force the αHL pore to adopt novel stoichiometries by oligomerizing subunit dimers generated by in vitro transcription and translation of a tandem gene. However, in vitro transcription and translation also produced truncated proteins, monomers, that were preferentially incorporated into oligomers. These oligomers were shown to be functional heptamers by single-channel recording and had a similar mobility to wild-type heptamers in SDS-polyacrylamide gels. Purified full-length subunit dimers were then prepared by using His-tagged protein. Again, single-channel recording showed that oligomers made from these dimers are functional heptamers, implying that one or more subunits are excluded from the central pore. Therefore, the αHL pore resists all structures except those that possess seven subunits immediately surrounding the central axis. Although we were not able to change the stoichiometry of the central pore of αHL by the concatenation of subunits, we extended our findings to prepare pores containing one subunit dimer and five monomers and purified them by SDS-PAGE. Two half-chelating ligands were then installed at adjacent sites, one on each subunit of the dimer. Single-channel recording showed that pores formed from this construct formed complexes with divalent metal ions in a similar fashion to pores containing two half-chelating ligands on the same subunit, confirming that the oligomers had assembled with seven subunits around the central lumen. The ability to incorporate subunit dimers into αHL pores increases the range of structures that can be obtained from engineered protein nanopores.

Although the examination of membrane proteins in planar bilayers is a powerful methodology for evaluating their pharmacology and physiological roles, introducing membrane proteins into bilayers is often a difficult process. Here, we use a mechanical probe to transfer membrane proteins directly from Escherichia coli expression colonies to artificial lipid bilayers. In this way, single-channel electrical recordings can be made from both of the major classes of membrane proteins, alpha-helix bundles and beta barrels, which are represented respectively by a K(+) channel and a bacterial pore-forming toxin. Further, we examined the bicomponent toxin leukocidin (Luk), which is composed of LukF and LukS subunits. We mixed separate LukF- and LukS-expressing colonies and transferred the mixture to a planar bilayer, which generated functional Luk pores. By this means, we rapidly screened binary combinations of mutant Luk subunits for a specific function: the ability to bind a molecular adaptor. We suggest that direct transfer from cells to bilayers will be useful in several aspects of membrane proteomics and in the construction of sensor arrays.

Staphylococcal leukocidin (Luk) and alpha-hemolysin (alphaHL) are members of the same family of beta barrel pore-forming toxins (betaPFTs). Although the alphaHL pore is a homoheptamer, the Luk pore is formed by the co-assembly of four copies each of the two distantly related polypeptides, LukF and LukS, to form an octamer. Here, we examine N- and C-terminal truncation mutants of LukF and LukS. LukF subunits missing up to nineteen N-terminal amino acids are capable of producing stable, functional hetero-oligomers with WT LukS. LukS subunits missing up to fourteen N-terminal amino acids perform similarly in combination with WT LukF. Further, the simultaneous truncation of both LukF and LukS is tolerated. Both Luk subunits are vulnerable to short deletions at the C terminus. Interestingly, the N terminus of the LukS polypeptide becomes resistant to proteolytic digestion in the fully assembled Luk pore while the N terminus of LukF remains in an exposed conformation. The results from this work and related experiments on alphaHL suggest that, although the N termini of betaPFTs may undergo reorganization during assembly, they are dispensable for the formation of functional pores.

Significant progress has been made in membrane protein engineering over the last 5 years, based largely on the re-design of existing scaffolds. Engineering techniques that have been employed include direct genetic engineering, both covalent and non-covalent modification, unnatural amino acid mutagenesis and total synthesis aided by chemical ligation of unprotected fragments. Combinatorial mutagenesis and directed evolution remain, by contrast, underemployed. Techniques for assembling and purifying heteromeric multisubunit pores have been improved. Progress in the de novo design of channels and pores has been slower. But, we are at the beginning of a new era in membrane protein engineering based on the accelerating acquisition of structural information, a better understanding of molecular motion in membrane proteins, technical improvements in membrane protein refolding and the application of computational approaches developed for soluble proteins. In addition, the next 5 years should see further advances in the applications of engineered channels and pores, notably in therapeutics and sensor technology.

A key to understanding bacterial pathogenicity is the mechanism by which water-soluble protein toxins assemble on cell membranes to form oligomeric bilayer-spanning pores. The recent reconstructions from cryo-electron micrographs of three-dimensional pore and prepore structures of the cholesterol-dependent toxin pneumolysin shed new light on the later steps of the assembly of large toxin pores. © 2005 Nature Publishing Group.