Search

Enzyme-polymer conjugates are complex molecules with great practical significance. This work was designed to develop a novel enzyme-polymer conjugate by covalently coupling a zwitterionic polymer with side dimethyl chains (pID) to Candida rugosa lipase (CRL) via the reaction between the anhydrides of polymer chains with the amino groups of the enzyme. The resulting two CRL-pID conjugates with different pID grafting densities were investigated in term of the catalytic activity, stability and structural changes. In comparison with native CRL, both the CRL conjugates displayed 2.2 times higher activity than the native enzyme, and showed an increase in the maximum reaction rate (Vmax) and a decrease in the Michaelis constant (Km), thus resulting in about three-fold increases in the catalytic efficiency (kcat/Km). These are mainly attributed to the activation of lipase by the hydrophobic alky side chains. Moreover, the thermostability and pH tolerance of the lipase conjugates were significantly enhanced due to the stabilizing effect of the zwitterion moieties. For instance, a five-fold increase of the enzyme half-life at 50 oC for the high-pID conjugated CRL was observed. Spectroscopic studies reveal that the pID conjugation protected the enzyme in the changes in its microenvironment and conformation, well correlating with enhanced activity and stability of lipase conjugates. The findings indicate that enzyme conjugation to the zwitterionic polymer is promising for improving enzyme performance and deserves further development.

Protein Tyrosine Phosphatases (PTPs) are drug target candidates due to their role in signal transduction and involvement in various pathologies. Difficulty in developing orthosteric inhibitors of PTPs suitable for therapeutic purposes has raised interest in the development of allosteric inhibitors, yet no allosteric regulatory model has been formulated for most PTP subtypes. For the two PTPs, belonging to two distinct subtypes, for which such mechanisms have been characterized, SHP2 and PTP1B, they have paved the way to development of specific inhibitors which show promise for future development of small molecule therapeutics. In this study we achieved the formulation and in vitro validation of a novel structure-based allosteric model for RPTPα and discuss its mechanistic implications, potential for drug discovery and possible applicability to other PTPs.

Transaminases catalyze the transfer of an amino group from a donor to a keto group of an acceptor substrate and are applicable to the asymmetric synthesis of herbicide L-phosphinothricin (L-PPT). Here, the important residue sites (C390, I22, V52, R141, Y138 and D239) of transaminase from Salmonella enterica (SeTA) were modified at the adjacency of the substrate-binding pocket to improve the enzyme activity. Among the constructed mutant library, the SeTA-Y138F mutant displayed higher activity than the wild-type enzyme. Compared to the wild-type, SeTA-Y138F showed improved catalytic efficiency with a 4.36-fold increase. The Km and kcat of SeTA -Y138F toward 4-(hydroxy(methyl) phosphoryl)-2-oxobutanoic acid (PPO) were 26.39 mM and 34.28 s−1, respectively. Subsequently, the three-enzyme co-expression system of E. coli BL21 (DE3)/pACYCDuet-SeTA-Y138F/pETDuet-AlaDH-BsGDH was developed by combining a alanine dehydrogenase (AlaDH) to recycle the byproduct of amino donor, a glucose dehydrogenase (BsGDH) for cofactor recycling. Under the optimized conditions, an excellent L-PPT yield of 90.8% was achieved by the whole-cell biotransformation with 500 mM PPO. It exhibited the tri-enzymatic coupling system was potential for effective production of target L-PPT.

Diaminopimelate decarboxylase (DAPDC) catalyzes the final step in the diaminopimelate biosynthesis pathway of bacteria. The product of the reaction is the essential amino acid l-lysine, which is an important precursor for the synthesis of the peptidoglycan cell wall, housekeeping proteins, and virulence factors of bacteria. Accordingly, the enzyme is a promising antibacterial target. Previous structural studies demonstrate that DAPDC exists as monomers, dimers, and tetramers in the crystal state. However, the active oligomeric form has not yet been determined. We show using analytical ultracentrifugation, small angle x-ray scattering, and enzyme kinetic analyses in solution that the active form of DAPDC from Bacillus anthracis, Escherichia coli, Mycobacterium tuberculosis, and Vibrio cholerae is a dimer. The importance of dimerization was probed further by generating dimerization interface mutants (N381A and R385A) of V. cholerae DAPDC. Our studies indicate that N381A and R385A are significantly attenuated in catalytic activity, thus confirming that dimerization of DAPDC is essential for function. These findings provide scope for the development of new antibacterial agents that prevent DAPDC dimerization.

A novel lipase gene (lipA) from Serratia marcescens L1 was cloned and expressed in Escherichia coli. LipA was shown to consist of 614 amino acid residues with seven residues that are different from the other nine reported lipases from S. marcescens. The activity of recombinant lipA based on a 50-mL culture scale approached 28 U/mL, which was more than that of the endogenous extracellular lipase from strain L1. The purified lipA fusion with a His-tag exhibited optimum activity at 30 °C and pH 8.0. Four effective mutants of lipase were obtained by site-directed mutation (SDM). The replacement of residues Arg552 and Gly2 in the enzyme molecule may play an important role in the catalysis characteristics and be responsible for the changes in thermostability and catalytic efficiency in the mutants. Mut G2P had the highest catalytic efficiency (kcat/Km) which was enhanced by 2.4-fold compared with its wild-type predecessor. These results indicated that lipA from S. marcescens could be expressed at a high level in E. coli and could be optimized by SDM, which provides a feasible basis for further study of its application.

Cyclohexanecarboxylate (CHCA) is formed by oxidative microbial degradation of n-alkylcycloparaffins and anaerobic degradation of benzoate, and also known to be a synthetic intermediate or the starter unit of biosynthesis of cellular constituents and secondary metabolites. Although two degradation pathways have been proposed, genetic information has been limited to the β-oxidation-like pathway. In this study, we identified a gene cluster, designated chcC1XTC2B1B2RAaAbAc, that is responsible for the CHCA aromatization pathway in Sinomonas (formerly Corynebacterium) cyclohexanicum strain ATCC 51369. Reverse transcription-PCR analysis indicated that the chc gene cluster is inducible by CHCA and that it consists of two transcriptional units, chcC1XTC2B1B2R and chcAaAbAc. Overexpression of the various genes in Escherichia coli, and purification of the recombinant proteins led to the functional characterization of ChcAaAbAc as subunits of a cytochrome P450 system responsible for CHCA hydroxylation; ChcB1 and ChcB2 as trans-4-hydroxyCHCA and cis-4-hydroxyCHCA dehydrogenases, respectively; ChcC1 was identified as a 4-oxoCHCA desaturase containing a covalently bound FAD; and ChcC2 was identified as a 4-oxocyclohexenecarboxylate desaturase. The binding constant of ChcAa for CHCA was found to be 0.37 mM. Kinetic parameters established for ChcB1 indicated that it has a high catalytic efficiency towards 4-oxoCHCA compared to trans- or cis-4-hydroxyCHCA. The Km and Kcat values of ChcC1 for 4-oxoCHCA were 0.39 mM and 44 s−1, respectively. Taken together with previous work on the identification of a pobA gene encoding a 4-hydroxybenzoate hydroxylase, we have now localized the remaining set of genes for the final degradation of protocatechuate before entry into the tricarboxylic acid cycle.

A type III polyketide synthase (SfuPKS1) from the edible seaweed Sargassum fusiforme was molecularly cloned and biochemically characterized. The recombinant SfuPKS1 catalyzed the condensation of fatty acyl-CoA with two or three malonyl-CoA using lactone-type intramolecular cyclization to produce tri- and/or tetraketides. Moreover, it can also utilize phenylpropanoyl-CoA to synthesize phloroglucinol derivatives through Claisen-type cyclization, exhibiting broad substrate and catalysis specificity. Furthermore, the catalytic efficiency (kcat/KM) for acetyl-CoA was 11.8-fold higher than that for 4-coumaroyl-CoA. A pathway for the synthesis of naringenin involving SfuPKS1 was also constructed in Escherichia coli by recombinant means, resulting in 4.9 mg of naringenin per liter.

Prenyl groups increase the lipophilicity of flavonoids, endowing them with a special activity, selectivity, and pharmacological properties by prenylation. Herein, a novel prenyltransferase (ShFPT) gene from Streptomyces sp. NT11 was expressed in Escherichia coli, and its biochemical characteristics were determined. ShFPT exhibited high selectivity to prenylate naringenin at C-6 to generate 6-prenylnaringenin. The optimal activity was observed at pH 6.0 and 55 °C. The Kcat and Km for naringenin were 0.0095 s-1 and 0.20 mM, respectively. Several promiscuous kinase and isopentenyl phosphate kinase genes were screened to develop the most efficient dimethylallyl diphosphate (DMAPP) synthesis pathway for 6-prenylnaringenin synthesis in E. coli. The 6-prenylnaringenin production was improved by changing the induction strategies and optimizing the bioconversion conditions. Finally, 6-prenylnaringenin production reached the highest yield of 69.9 mg/L with average productivity of 4.0 mg/L/h after 16 h incubation, which is the highest yield for any prenylated flavonoid reported to date in E. coli. Therefore, this study provides an efficient method for 6-prenylnaringenin production and reveals the DMAPP synthesis pathway.

l-Ascorbic acid-2-phosphate (AsA-2P) is stable in aqueous solution and at high temperatures and is widely used in foods, pharmaceuticals, cosmetics, and fodders; however, practical application of enzymatic synthesis methods to promote industrial-scale production of AsA-2P remains a major challenge. In this study, we enhanced the phosphorylation efficiency of Pseudomonas aeruginosa acid phosphatase (APase; EC 3.1.3.2) for AsA-2P production via protein engineering. Among the mutants obtained, we selected the most efficient mutant (Var5; G125E/D135T/S136N), which exhibited an increased kcat of 18.6 s-1 and a Km for AsA of 223.9 mM. In addition, Var5 exhibited a maximum enzyme activity of 2080.4 U/L after 10 h of fermentation, which was 80% higher than the wild-type enzyme. Furthermore, under optimal conditions, Var5 showed a maximal conversion of 48.6% and achieved a final AsA-2P titer of 61.5 g/L at 8 h, which is considerably higher than that reported for other similar biocatalytic approaches. These findings demonstrate the potential of this method for the large-scale production of AsA-2P.

Urease is a metalloenzyme that catalyzes the hydrolysis of urea into ammonia and carbon dioxide, which has a negative impact on human health and agriculture. In this study, the inactivation of jack bean urease by nitidine chloride (NC) was investigated to elucidate the inhibitory effect, kinetics, and underlying mechanism of action. The results showed that NC acted as a concentration- and time-dependent inhibitor with an IC50 value of 33.2 ± 4.8 μM and exhibited a similar inhibitory effect to acetohydroxamic acid (IC50 = 31.7 ± 5.8 μM). Further kinetic analysis demonstrated that NC was a slow-binding and non-competitive inhibitor for urease. Thiol-blocking reagents (dithiothreitol, glutathione, and l-cysteine) significantly retarded urease inactivation, while Ni2+ competitive inhibitors (boric acid and sodium fluoride) synergetically suppressed urease with NC, suggesting that the active site sulfhydryl groups were possibly obligatory for NC blocking urease. Molecular docking simulation further argued its inhibition mechanism. Additionally, NC-induced deactivation of urease was verified to be reversible since the inactivated enzyme could be reactivated by glutathione. Taking together, NC was a non-competitive inhibitor targeting the thiol group at the active site of urease with characteristics of concentration dependence, reversibility, and slow binding, serving as a promising novel urease suppressant.

Biofilms are communities of self-enmeshed bacteria in a matrix of exopolysaccharides. The widely distributed human pathogen and commensal Escherichia coli produces a biofilm matrix composed of phosphoethanolamine (pEtN)-modified cellulose and amyloid protein fibers, termed curli. The addition of pEtN to the cellulose exopolysaccharide is accomplished by the action of the pEtN transferase, BcsG, and is essential for the overall integrity of the biofilm. Here, using the synthetic co-substrates p-nitrophenyl phosphoethanolamine and β-d-cellopentaose, we demonstrate using an in vitro pEtN transferase assay that full activity of the pEtN transferase domain of BcsG from E. coli (EcBcsGΔN) requires Zn2+ binding, a catalytic nucleophile/acid-base arrangement (Ser278/Cys243/His396), disulfide bond formation, and other newly uncovered essential residues. We further confirm that EcBcsGΔN catalysis proceeds by a ping-pong bisubstrate-biproduct reaction mechanism and displays inefficient kinetic behavior (kcat/KM = 1.81 × 10-4 ± 2.81 × 10-5 M-1 s-1), which is typical of exopolysaccharide-modifying enzymes in bacteria. Thus, the results presented, especially with respect to donor binding (as reflected by KM), have importantly broadened our understanding of the substrate profile and catalytic mechanism of this class of enzymes, which may aid in the development of inhibitors targeting BcsG or other characterized members of the pEtN transferase family, including the intrinsic and mobile colistin resistance factors.

Coproporpyhrin III is the substrate of coproporphyrin ferrochelatases (CpfCs). These enzymes catalyse the insertion of ferrous iron into the porphyrin ring. This is the penultimate step within the coproporphyrin-dependent haeme biosynthesis pathway. This pathway was discovered in 2015 and is mainly utilised by monoderm bacteria. Prior to this discovery, monoderm bacteria were believed to utilise the protoporphyrin-dependent pathway, analogously to diderm bacteria, where the substrate for the respective ferrochelatase is protoporphyrin IX, which has two propionate groups at positions 6 and 7 and two vinyl groups at positions 2 and 4. In this work, we describe for the first time the interactions of the four-propionate substrate, coproporphyrin III, and the four-propionate product, iron coproporphyrin III (coproheme), with the CpfC from Listeria monocytogenes and pin down differences with respect to the protoporphyrin IX and haeme b complexes in the wild-type (WT) enzyme. We further created seven LmCpfC variants aiming at altering substrate and product coordination. The WT enzyme and all the variants were comparatively studied by spectroscopic, thermodynamic and kinetic means to investigate in detail the H-bonding interactions, which govern complex stability and substrate specificity. We identified a tyrosine residue (Y124 in LmCpfC), coordinating the propionate at position 2, which is conserved in monoderm CpfCs, to be highly important for binding and stabilisation. Importantly, we also describe a tyrosine-serine-threonine triad, which coordinates the propionate at position 4. The study of the triad variants indicates structural differences between the coproporphyrin III and the coproheme complexes. ENZYME: EC 4.99.1.9.

Hemoproteins play important roles in physiological activities in animals and plants. The research on the structures and properties of hemoproteins can better understand the relationship between structure and function of hemoproteins and expand the application fields and scopes of hemoproteins. In this report, the peroxidase activity, stability and structure changes of cytochrome c (Cyt c) and quench treatment Cyt c at different pH values and different quenching temperatures were studied by UV–Vis spectroscopy, circular dichroism, Fourier transform infrared spectroscopy and electrochemical methods, respectively. The results indicated: 1. The optimal pH value and temperature for Cyt c quench treatment were pH 9 and 85 °C (marked as Q-Cyt c), respectively, in 50 mM sodium phosphate buffer solution (PBS). 2. The Michaelis–Menten constant Km, maximum catalytic rate Vmax and catalytic rate constant Kcat of Q-Cyt c were calculated to be 3.8 μM, 0.42 μM·s−1 and 0.085 s−1, respectively, in 50 mM pH 9 PBS. The catalytic efficiency of Q-Cyt c was 0.022 μM−1 s−1, which was 30% of the catalytic efficiency of horseradish peroxidase (0.0742 μM−1 s−1). 3. Compared with natural Cyt c, while the overall structure of Q-Cyt c became looser, its hydrophobicity had changed. At the same time, the degree of exposure and hydrophobicity of the heme structure decreased, respectively. 4. The content of Random-Coil structure of Q-Cyt c would restore to its state at room temperature, while the other secondary structures maintained their structures at high temperature (below denaturation temperature) before quenching. 5. The formal potential of Q-Cyt c was greater than that of Cyt c, the hydrophobicity of Q-Cyt c was enhanced compared with Cyt c, which might lead to the decreased stability and improved catalytic activity of Q-Cyt c. 6. Q-Cyt c could be used in industrial decolorization and biosensor construction. 7. Quench treatment may be an effective method to transform Cyt c from a classical redox protein to a peroxidase like enzyme.

The protozoan Plasmodium falciparum is the main aetiological agent of tropical malaria. Characteristic of the phylum is the presence of a plastid-like organelle which hosts several homologs of plant proteins, including a ferredoxin (PfFd) and its NADPH-dependent reductase (PfFNR). The PfFNR/PfFd redox system is essential for the parasite, while mammals share no homologous proteins, making the enzyme an attractive target for novel and much needed antimalarial drugs. Based on previous findings, three chemically reactive residues important for PfFNR activity were identified: namely, the active-site Cys99, responsible for hydride transfer; Cys284, whose oxidation leads to an inactive dimeric form of the protein; and His286, which is involved in NADPH binding. These amino acid residues were probed by several residue-specific reagents and the two cysteines were shown to be promising targets for covalent inhibition. The quantitative and qualitative description of the reactivity of few compounds, including a repurposed drug, set the bases for the development of more potent and specific antimalarial leads. (c) 2021 Elsevier Inc. All rights reserved.

Bifidobacterium longum endo-α-N-acetylgalactosaminidase (GH101), EngBF, is highly specific toward the mucin Core 1 glycan, Galβ1-3GalNAc. Apart from the side chains involved in the retaining mechanism of EngBF, Asp-682 is important for the activity. In the crystal structures of both EngBF and EngSP (from Streptococcus pneumoniae), we identified a conserved water molecule in proximity to Asp-682 and the homologue residue in EngSP. The water molecule also coordinates the catalytic nucleophile and three other residues conserved in GH101 enzymes; in EngBF, these residues are His-685, His-718, and Asn-720. With casein-glycomacropeptide as the substrate, the importance of Asp-682 was confirmed by the lack of a detectable activity for the D682N enzyme. The enzyme variants, H685A, H718A, H685Q, and H718Q, all displayed only a modestly reduction in kcat of up to 15 fold for the H718A variant. However, the double-substituted variants, H685A/H718A and H685Q/H718Q, had a greatly reduced kcat value by about 200 fold compared to that of wild-type EngBF. With the synthetic substrate, Galβ(1-3)GalNAcα1-para-nitrophenol, kcat of the double-substituted variants was only up to 30-fold reduced and was found to increase with pH. Compared to the pre-steady-state kinetics of wild-type EngBF, a burst of about the size of the enzyme concentration was absent with the double-substituted EngBF variants, indicating that the nucleophilic attack had become at least as slow as the hydrolysis of the enzyme intermediate. Together, the results indicate that not only Asp-682 but also the entire conserved network of His-685, His-718, and what we suggest is a catalytic water molecule is important in the activation of the catalytic nucleophile., This work was supported by the Danish Dairy Research Foundation, the Villum Foundation, and the Independent Research Fund Denmark (9041-00126B) to MW. The work has been carried out using CSUC resources (RC).

Interactions between ionic liquids and biomolecules are of great interest due to the intrinsic properties of ionic liquids and the flexibility allowed by mixing and matching cations and anions to create unique ionic liquids. A number of ionic liquid–biomolecule studies have focused on interactions with proteins, including industrially relevant enzymes. One of these, laccase from Trametes versicolor, is a naturally derived enzyme used in the breakdown of phenolic compounds in a wide variety of industries, especially useful in breakdown of lignocellulosic materials. Here, a combination of experiments and molecular dynamics (MD) simulations was used to investigate the interactions of ionic liquids with laccase. Enzyme kinetics assays indicated that ionic liquids composed of tetramethylguanidine (TMG) and either serine or threonine caused significant reduction in enzymatic activity, while kinetics was not impacted by TMG-Asp or TMG-Glu ionic liquids. Similarly, intrinsic fluorescence of laccase in the presence of TMG-Ser and TMG-Thr exhibited a shift in spectral properties consistent with structural destabilization, but again TMG-Asp and TMG-Glu had no impact. MD simulations of laccase and ABTS with/without TMG-Ser ionic liquid provided insight into the deactivation mechanism of laccase. The simulations indicated that TMG-Ser disrupts laccase’s electron transfer mechanism.

The isocitrate lyase paralogs of Mycobacterium tuberculosis (ICL1 and 2) are essential for mycobacterial persistence and constitute targets for the development of antituberculosis agents. We report that (2R,3S)-2-hydroxy-3-(nitromethyl)succinic acid (5-NIC) undergoes apparent retro-aldol cleavage as catalyzed by ICL1 to produce glyoxylate and 3-nitropropionic acid (3-NP), the latter of which is a covalent-inactivating agent of ICL1. Kinetic analysis of this reaction identified that 5-NIC serves as a robust and efficient mechanism-based inactivator of ICL1 (kinact/KI = (1.3 ± 0.1) × 103 M-1 s-1) with a partition ratio

The effects of psychotropic agents such as fluvoxamine, fluoxetine, paroxetine, milnacipran, and fluphenazine on dopamine formation from p-tyramine catalysed by cytochrome P450 (CYP) 2D6.2 (Arg296Cys;Ser486Thr), CYP2D6.10 (Pro34Ser;Ser486Thr), and CYP2D6.39 (Ser486Thr) were compared with the effects on dopamine formation from p-tyramine by CYP2D6.1. Michaelis constants (Km) and maximal velocity (kcat) values for dopamine formation and inhibition constants (Ki) of the psychotropic agents were determined.For CYP2D6.39, the kcat values for fluvoxamine, fluoxetine, and milnacipran, but not for paroxetine and fluphenazine, gradually increased with increasing concentrations, indicating activation of the catalysed reaction.Fluphenazine competitively inhibited dopamine formation catalysed by all variants, with a higher Ki value for CYP2D6.10. Among the three compounds that have a trifluoromethyl group in their chemical structure, only fluvoxamine and fluoxetine, as well as milnacipran that does not have this group, decreased Km values and/or increased kcat values for dopamine formation, suggesting that the group may not be essential for the activation.These findings indicate that substitution of amino acids at positions 34 and 486 can affect the affinity (Km) and enzymatic activity (kcat), respectively, for milnacipran and that the effect of substitution of arginine to cysteine at the 296th position on the activation would be effector dependent.

We aimed to identify and evaluate natural organosulfur compounds (OSCs) from the genus Allium as potent dual inhibitors of α-amylase and α-glucosidase via a set of molecular simulations and in-vitro analysis. We reported that all OSCs fall under the acceptable scores of Lipinski’s rules and desirable ADME parameters. In-silico screening revealed that OSCs strongly interacted with α-amylase and α-glucosidase crystal structures. Our in-vitro studies with four OSCs having best ΔG-scores demonstrated that alliin, S-allyl-L-cysteine (SAC), N-acetylcysteine (NAC), and S-ethyl-L-cysteine (SEC) exhibit a marked in-vitro inhibition of α-amylase activity, whereas, γ-glutamylcysteine (GGC), SEC, alliin, and SAC potentially inhibited the in-vitro α-glucosidase activity. Our enzyme kinetics studies depicted that the selected OSCs competitively inhibited the α-amylase and α-glucosidase activity. In conclusion, this initial in-silico and the in-vitro report demonstrates the drug-likeness and ADME indices of OSCs and identifies alliin, SAC, NAC, SEC, and GGC as potential dual inhibitors of α-amylase and α-glucosidase.

Glucose oxidase (GOD) has many practical applications, but its poor thermostability limits its broader use. In this research, three primary mutants of wild-type GOD were designed using rational mutagenesis, and the GODm mutant was constructed by combinatorial design. The expression, purification, and enzymatic properties of the mutants were studied. The specific enzyme activity of GODm was 2.10-fold higher than that of wild type, and the (kcat/Km) value was increased by 1.45-fold. After treatment at 55 ℃ for 3 h, GODm retained 37.5% of its enzymatic activity, and the half-life (t1/2) of GODm at 55 ℃ and 65 ℃ was 2.28-fold and 3.36-fold higher than that of wild type, respectively. By analyzing the three-dimensional structure of wild type and the GODm mutant, it was found that T30V formed a new hydrogen bond with FAD and strengthened the hydrophobic interaction, D315K optimized the surface electrostatic interaction, and A162T improved the efficiency of the electron pathway. Thus, a novel mutant with improved thermostability and catalytic efficiency was obtained in this research.

Proline dehydrogenase (PRODH) is a flavoenzyme that catalyzes the first step of proline catabolism, the oxidation of L-proline to Δ(1)-pyrroline-5-carboxylate. PRODH has emerged as a cancer therapy target because of its involvement in the metabolic reprogramming of cancer cells. Here we report the discovery of a new class of PRODH inactivator, which covalently and irreversibly modifies the FAD in a light-dependent manner. Two examples, 1,3-dithiolane-2-carboxylate and tetrahydrothiophene-2-carboxylate, have been characterized using X-ray crystallography (1.52 – 1.85 Å resolution), absorbance spectroscopy, and enzyme kinetics. The structures reveal that in the dark, these compounds function as classical reversible, proline analog inhibitors. However, exposure of enzyme-inhibitor co-crystals to bright white light induces decarboxylation of the inhibitor and covalent attachment of the residual S-heterocycle to the FAD N5 atom, locking the cofactor into a reduced, inactive state. Spectroscopic measurements of the inactivation process in solution confirm the requirement for light and show that blue light is preferred. Enzyme activity assays show that the rate of inactivation is enhanced by light and that the inactivation is irreversible. We also demonstrate the photosensitivity of cancer cells to one of these compounds. A possible mechanism is proposed involving photoexcitation of the FAD while the inhibitor is noncovalently bound in the active site, followed by electron transfer, decarboxylation, and radical combination steps. Our results could lead to the development of photopharmacological drugs targeting PRODH.

Acid phosphatase from rice bean (Vigna umbellata Thunb.) got isolated with 740-fold purification and specific activity 80 U/mg protein. In the native PAGE, a single protein band got observed upon silver staining. The activity staining revealed that the band corresponded to acid phosphatase. The molecular mass of the native acid phosphatase was 80 kDa. The SDS-PAGE exhibited a single protein band of molecular mass 40–41 kDa. Acid phosphatase is colorless and exhibited maximum absorbance at 278 nm but no absorption maximum at 550 nm. The enzyme retained 91.8% activity after 120 days when stored at 4 °C and improved further in the presence of polyethylene glycol (95.6%) and bovine serum albumin (97.0%) under similar storage conditions. The enzyme functioned optimally at pH 5.5 and 60 °C. The energy of activation was 32.6 kJ/mol. The values of Km and Vmax determined by the Lineweaver–Burk plot were 0.108 mM (p-nitrophenylphosphate) and 90.09 μmol/min/mg, respectively. The value of kcat and kcat/Km were 120.12 s−1 and 1.11 × 106 M−1 s−1, respectively.

Arginine decarboxylase (ADC) catalyzes the decarboxylation of arginine to form agmatine, an important physiological and pharmacological amine, and attracts attention to the enzymatic production of agmatine. In this study, we for the first time overexpressed and characterized the marine Shewanella algae ADC (SaADC) in Escherichia coli. The recombinant SaADC showed the maximum activity at pH 7.5 and 40 °C. The SaADC displayed previously unreported substrate inhibition when the substrate concentration was higher than 50 mM, which was the upper limit of testing condition in other reports. In the range of 1–80 mM l-arginine, the SaADC showed the Km, kcat, Ki, and kcat/Km values of 72.99 ± 6.45 mM, 42.88 ± 2.63 s−1, 20.56 ± 2.18 mM, and 0.59 s/mM, respectively, which were much higher than the Km (14.55 ± 1.45 mM) and kcat (12.62 ± 0.68 s−1) value obtained by assaying at 1–50 mM l-arginine without considering substrate inhibition. Both the kcat values of SaADC with and without substrate inhibition are the highest ones to the best of our knowledge. This provides a reference for the study of substrate inhibition of ADCs.

There is growing interest in using isothermal titration calorimetry (ITC) to characterize enzyme kinetics by measuring the heat produced or absorbed by catalysis in real time. Since virtually all chemical reactions are associated with changes in enthalpy, ITC represents a robust and nearly universal experimental approach. Nevertheless, there are technical challenges that limit ITC's applicability. For instance, the full kinetic characterization of enzymes with two substrates (bi-substrate enzymes), which comprise the majority of known examples, requires a series of experiments to be performed as the concentrations of both substrates are varied. This is a time-consuming and expensive process using current ITC methods since many (>5) individual experiments must be performed independently to obtain a sufficient quantity of data. We have developed a new ITC method, which we term 2D-ITC, which maps the reaction velocity as a function of two substrate concentrations in a single, roughly 2 h long experiment. This method provides a level of detail that rivals or exceeds any existing enzyme assay, as a single experiment generates on the order of 7000 catalytic rate measurements. In a proof-of-principle application to rabbit muscle pyruvate kinase (rMPK), the method correctly identified the enzyme's random sequential mechanism and allosteric catalytic suppression by the amino acid phenylalanine (Phe). Unexpectedly, we found that while Phe reduces affinity for the substrate phosphoenolpyruvate, a known phenomenon, it also alleviates inhibition by the reaction product ATP, which had not been reported previously. Given the relative abundance of ATP in the cell, this opposing effect is expected to have a substantial impact on rMPK activity.

Three CYP3A4 substrates, midazolam, ticlopidine, and diazepam, display non-Michaelis-Menten kinetics, form multiple primary metabolites, and are sequentially metabolized to secondary metabolites. We generated saturation curves for these compounds and analyzed the resulting datasets using a number of single-substrate and multisubstrate binding models. These models were parameterized using rate equations and numerical solutions of the ordinary differential equations. Multisubstrate binding models provided results superior to single-substrate models, and simultaneous modeling of multiple metabolites provided better results than fitting the individual datasets independently. Although midazolam datasets could be represented using standard two-substrate models, more complex models that include explicit enzyme-product complexes were needed to model the datasets for ticlopidine and diazepam. In vivo clearance predictions improved markedly with the use of in vitro parameters from the complex models versus the Michaelis-Menten equation. The results highlight the need to use sufficiently complex kinetic schemes instead of the Michaelis-Menten equation to generate accurate kinetic parameters. SIGNIFICANCE STATEMENT: The metabolism of midazolam, ticlopidine, and diazepam by CYP3A4 results in multiple metabolites and sequential metabolism. This study evaluates the use of rate equations and numerical methods to characterize the in vitro enzyme kinetics. Use of complex cytochrome P450 kinetic models is necessary to obtain accurate parameter estimates for predicting in vivo disposition.

Enzyme engineering toward catalytic-tetrad residues usually results in activity loss. Unexpectedly, we found that a directed evolution campaign yielded a beneficial residue A100 in KmCR (a carbonyl reductase from Kluyveromyces marxianus ZJB14056), which is a residue of catalytic tetrad and conserved according to multiple sequence alignment. Inspired by this finding, we performed saturation mutagenesis on all the four residues of catalytic tetrad of KmCR. A number of variants with improved enzymatic activities were obtained. Among them, the variant KmCR_A100S exhibited increased catalytic efficiency (kcat /KM = 47.3 s-1 ·mM-1 ), improved stereoselectivity (from moderate selectivity (deP = 66.7%) to strict (S)-selectivity (deP > 99.5%)), and extended substrate scope, compared to those of KmCR_WT. In silico analysis showed that a relay system was rebuilt in KmCR via the beneficial residue S100. Furthermore, comparison of 11 protein engineering campaigns indicated that the beneficial position is easily overlooked due to the long distance (>10 A) from ketone substrates. Since CRs share similar catalytic mechanism, the knowledge gained from this study has universal significance to CR engineering.

Thymidylate kinase (TMK/TMPK) is an important enzyme in DNA biosynthesis and catalyses the conversion of dTMP to dTDP. Due to its therapeutic potential, the focus has been on characterizing the TMK proteins of pathogens and human origin, with very little information available on the TMK proteins of photosynthetic organisms and agriculturally important nitrogen-fixing organisms. In this work we report the characterisation of TMK in an evolutionarily ancient organism, cyanobacteria. The TMK protein of the photosynthetic, nitrogen-fixing cyanobacterium Nostoc PCC7120 (AnTMK) was found to have low conformational stability, which related to its low Tm of ~46 °C confirmed by D ifferential S canning F luorimetry (DSF) and D ifferential S canning C alorimetry (DSC) techniques. The AnTMK protein exhibited substrate specificity for dTMP and ATP with Km of 20.74 ± 1.47 μM and 20.17 ± 2.96 μM respectively. The enzyme kinetics data and the positive co-operativity observed between dTMP and ATP binding correlated well with the data obtained from I sothermal T itration C alorimetry (ITC). Homology model of the enzyme suggested that the binding mode of substrate nucleotides to the enzyme is conserved. When overexpressed constitutively in Nostoc PCC7120 (Antmk+), it supported faster growth measured in terms of chlorophyll a content under normal growth conditions, but exhibited lower photosynthetic efficiency. Compared to the vector control recombinant Nostoc AnpAM, the Antmk + cells exhibited higher photoinhibition at higher light irradiance with more open reaction centres and lower dissipation of heat, indicative of damage to photosynthetic machinery. This indicated that the TMK is likely to have a significant role in photosynthetic organisms.

Nickel superoxide dismutase (NiSOD) is an enzyme that protects cells against O2·-. While the structure of its active site is known, the mechanism of the catalytic cycle is still not elucidated. Its active site displays a square planar NiII center with two thiolates, the terminal amine and an amidate. We report here a bioinspired NiII complex built on an ATCUN-like binding motif modulated with one cysteine, which demonstrates catalytic SOD activity in water (kcat = 8.4(2) × 105 M-1 s-1 at pH = 8.1). Its reactivity with O2·- was also studied in acetonitrile allowing trapping two different short-lived species that were characterized by electron paramagnetic resonance or spectroelectrochemistry and a combination of density functional theory (DFT) and time-dependent DFT calculations. Based on these observations, we propose that O2·- interacts first with the complex outer sphere through a H-bond with the peptide scaffold in a [NiIIO2·-] species. This first species could then evolve into a NiIII hydroperoxo inner sphere species through a reaction driven by protonation that is thermodynamically highly favored according to DFT calculations.

The metabolically promiscuous pentachlorophenol (PCP) hydroxylating Phe4MO (represented as CpsB) was detected, amplified (from the genome of Bacillus tropicus strain AOA-CPS1), cloned, overexpressed, purified and characterized here. The 1.755-kb gene cloned in the pET15b vector expressed a ≅ 64 kDa monomeric protein which was purified to homogeneity by single-step affinity chromatography, with a total yield of 82.1%. The optimum temperature and pH of the enzyme were found to be 30 °C and 7.0, respectively. CpsB showed functional stability between pH 6.0–7.5 and temperature 25–30 °C. The enzyme–substrate reaction kinetic studies showed the allosteric nature of the enzyme and followed pre-steady state using NADH as a co-substrate with apparent vmax, Km, kcat and kcat/Km values of 0.465 μM.s−1, 140 μM, 0.099 s−1 and 7.07 × 10−4 μM−1.s−1, respectively, for the substrate PCP. The in-gel trypsin digestion experiments and bioinformatic tools confirmed that the reported enzyme is a Phe4MO with multiple putative conserved domains and metal ion-binding site. Though Phe4MO has been reported to have a diverse catalytic function, here we report, for the first time, that it functions as a PCP dehalogenase or PCP-4-monooxygenase by hydroxylating PCP. Hence, the use of this enzyme may be further explored in the bioremediation of PCP and other related xenobiotics.

(S)-4-Chlorophenylpyridylmethanol and (R)-4-chlorobenzhydrol are key pharmaceutical intermediates for the synthesis of bepotastine and cloperastine, respectively. However, the biocatalytic approach to prepare these bulky diaryl ketones remains challenging because of the low activity of naturally occurring alcohol dehydrogenases (ADH). In the present study, ADH seq5, which has an adequate binding pocket volume and accepts bulky diaryl ketones, was further engineered with a binding pocket of increased hydrophobicity. Based on molecular simulation and binding free energy analyses, a small mutation library was constructed, and mutant seq5-D150I with a threefold increase in kcat and a low Km was obtained successfully. The comparison of kinetic parameters, binding free energy, docking conformation, and critical catalytic distances calculated by molecular dynamic simulations revealed the source of increased activity. To develop a practical approach with seq5-D150I, reaction conditions including pH, temperature, buffer, and metal ions were optimised and applied to synthesise (S)-4-chlorophenylpyridylmethanol and (R)-4-chlorobenzhydrol with high enantiomeric excess. The space-time yields for (S)-4-chlorophenylpyridylmethanol and (R)-4-chlorobenzhydrol increased dramatically to as high as 263.4 g∙L-1 day-1 and 150 g∙L-1 day-1, respectively, which, to our knowledge, is the highest reported yield to date. These results show that the biocatalytic approach with seq5-D150I may be practical for future industrial applications.Key points An alcohol dehydrogenase was engineered based on binding free energy analysis. The mutant seq5-D150I obtained a threefold increase in kcat and a low Km. Two important pharmaceutical intermediates were obtained with high space-time yield.

Linalool and nerolidol are terpene alcohols that occur naturally in many aromatic plants and are commonly used in food and cosmetic industries as flavors and fragrances. In plants, linalool and nerolidol are biosynthesized as a result of respective linalool synthase and nerolidol synthase, or a single linalool/nerolidol synthase. In our previous work, we have isolated a linalool/nerolidol synthase (designated as PamTps1) from a local herbal plant, Plectranthus amboinicus, and successfully demonstrated the production of linalool and nerolidol in an Escherichia coli system. In this work, the biochemical properties of PamTps1 were analyzed, and its 3D homology model with the docking positions of its substrates, geranyl pyrophosphate (C10) and farnesyl pyrophosphate (C15) in the active site were constructed. PamTps1 exhibited the highest enzymatic activity at an optimal pH and temperature of 6.5 and 30 °C, respectively, and in the presence of 20 mM magnesium as a cofactor. The Michaelis–Menten constant (Km) and catalytic efficiency (kcat/Km) values of 16.72 ± 1.32 µM and 9.57 × 10–3 µM−1 s−1, respectively, showed that PamTps1 had a higher binding affinity and specificity for GPP instead of FPP as expected for a monoterpene synthase. The PamTps1 exhibits feature of a class I terpene synthase fold that made up of α-helices architecture with N-terminal domain and catalytic C-terminal domain. Nine aromatic residues (W268, Y272, Y299, F371, Y378, Y379, F447, Y517 and Y523) outlined the hydrophobic walls of the active site cavity, whilst residues from the RRx8W motif, RxR motif, H-α1 and J-K loops formed the active site lid that shielded the highly reactive carbocationic intermediates from the solvents. The dual substrates use by PamTps1 was hypothesized to be possible due to the architecture and residues lining the catalytic site that can accommodate larger substrate (FPP) as demonstrated by the protein modelling and docking analysis. This model serves as a first glimpse into the structural insights of the PamTps1 catalytic active site as a multi-substrate linalool/nerolidol synthase.

A novel β-glucosidase was purified from pumpkin (Cucurbita moschata) seed by anion exchange chromatography and gel permeation chromatography, and its molecular mass was determined to be 42.8 kDa by gel permeation chromatography. The heterodimeric structure consisting of two subunits, free from disulfide bonds, was determined by native-PAGE analysis followed by zymography. The enzyme was maximally active at pH 4.0 and 70°C, and Vmax, Km, and kcat values were 0.078 units mg−1 protein, 2.22 mM, and 13.29 min−1, respectively, employing p-nitrophenyl-β- d -glucopyranoside as the substrate. The high content of glycine determined by amino acid analysis implies that the enzyme possesses flexible conformations and interacts with cell membranes and walls in nature. Circular dichroism studies revealed that the high stability of the enzyme within the pH range of 2.0–10.0 is due to its reversible pH-responsive characteristics for α-helix–antiparallel β-sheet interconversion.

FoF1-ATP synthases are ubiquitous membrane-bound, rotary motor enzymes that can catalyze ATP synthesis and hydrolysis. Their enzyme kinetics are controlled by internal subunit rotation, by substrate and product concentrations, by mechanical inhibitory mechanisms, but also by the electrochemical potential of protons across the membrane. Single-molecule Förster resonance energy transfer (smFRET) has been used to detect subunit rotation within FoF1-ATP synthases embedded in freely diffusing liposomes. We now report that kinetic monitoring of functional rotation can be prolonged from milliseconds to seconds by utilizing an Anti-Brownian electrokinetic trap (ABEL trap). These extended observation times allowed us to observe fluctuating rates of functional rotation for individual FoF1-liposomes in solution. Broad distributions of ATP-dependent catalytic rates were revealed. The buildup of an electrochemical potential of protons was confirmed to limit the maximum rate of ATP hydrolysis. In the presence of ionophores or uncouplers, the fastest subunit rotation speeds measured in single reconstituted FoF1-ATP synthases were 180 full rounds per second. This was much faster than measured by biochemical ensemble averaging, but not as fast as the maximum rotational speed reported previously for isolated single F1 complexes uncoupled from the membrane-embedded Fo complex. Further application of ABEL trap measurements should help resolve the mechanistic causes of such fluctuating rates of subunit rotation.TOC GRAPHICFigure 1.

Enzymes employ a wide range of protein motions to achieve efficient catalysis of chemical reactions. While the role of collective protein motions in substrate binding, product release, and regulation of enzymatic activity is generally understood, their roles in catalytic steps per se remain uncertain. Here, molecular dynamics simulations, enzyme kinetics, X-ray crystallography, and nuclear magnetic resonance spectroscopy are combined to elucidate the catalytic mechanism of adenylate kinase and to delineate the roles of catalytic residues in catalysis and the conformational change in the enzyme. This study reveals that the motions in the active site, which occur on a time scale of picoseconds to nanoseconds, link the catalytic reaction to the slow conformational dynamics of the enzyme by modulating the free energy landscapes of subdomain motions. In particular, substantial conformational rearrangement occurs in the active site following the catalytic reaction. This rearrangement not only affects the reaction barrier but also promotes a more open conformation of the enzyme after the reaction, which then results in an accelerated opening of the enzyme compared to that of the reactant state. The results illustrate a linkage between enzymatic catalysis and collective protein motions, whereby the disparate time scales between the two processes are bridged by a cascade of intermediate-scale motion of catalytic residues modulating the free energy landscapes of the catalytic and conformational change processes.

6-phosphogluconate dehydrogenase (6PGDH) participates in pentose phosphate pathway of glucose metabolism by catalyzing oxidative decarboxylation of 6-phsophogluconate (6PG) and its absence has been lethal for several eukaryotes. Despite being a validated drug target in many organisms like Plasmodium, the enzyme has not been explored in leishmanial parasites. In the present study, 6PGDH of Leishmania donovani (Ld6PGDH) is cloned and purified followed by its characterization using biochemical and structural approaches. Ld6PGDH lacks the glycine-serine-rich sequence at its C-terminal that is present in other eukaryotes including humans. Leishmanial 6PGDH possesses more affinity for substrate (6PG) and cofactor (NADP) in comparison to that of human. The enzymatic activity is inhibited by gentamicin and cefuroxime through competitive mode with functioning more potently towards leishmanial 6PGDH than its human counterpart. CD analysis has shown higher α-helical content in the secondary structure of Ld6PGDH, while fluorescence studies revealed that tryptophan residues are not completely accessible to solvent environment. The three-dimensional structure was generated through homology modelling and docked with substrate and cofactor. The docking studies demonstrated two separate binding pockets for 6PG and NADP with higher affinity for the cofactor binding, and Asn105 is interacting with substrate as well as the cofactor. Additionally, MD simulation has shown complexes of Ld6PGDH with 6PG and NADP to be more stable than its apo form. Altogether, the present study might provide the foundation to investigate this enzyme as potential target against leishmaniasis. KEY POINTS: • Ld6PGDH enzymatic activity is competitively inhibited by gentamicin and cefuroxime. • It displays more helical contents and all structural characteristics of 6PGDH family. • Interaction studies demonstrate higher affinity of cofactor than substrate for Ld6PGDH.

Endoglucanases from glycoside hydrolase family 5 (GH5) are the key enzymes in degradation of diverse plant polysaccharides. Present study reports purification, characterization and partial sequencing of novel thermostable GH5 family endoglucanase from a newly isolated brown rot fungi Fomitopsis meliae CFA 2. Endoglucanase was purified 34.18 fold with a specific activity of 302.90 U/mg. The molecular weight of the endoglucanase was 37.87 kDa as determined by SDS PAGE. LC MS/MS analysis identified the protein to be a member of GH5_5 family. The temperature and pH optima for endoglucanase activity were 70 °C and 4.8, respectively. The enzyme catalyzed the hydrolysis of carboxymethyl-cellulose with a Km of 12.0 mg/ml, Vmax of 556.58 μmol/min/mg and Kcat of 129.41/sec. The enzyme was stimulated by Zn+2 and K+ metal ions and DTT. Half-life (t1/2) for endoglucanase was found to be 11.36 h with decimal reduction time (D) of 37.75 h at 70 °C. The activation energy for endoglucanase was found to be 30.76 kJ/mol (50 °C–70 °C). Looking at the results, the endoglucanase from Fomitopsis meliae CFA 2 seems to be a promising thermostable enzyme which may be applicable in applications like biomass hydrolysis.

Freestanding non-heme iron/α-ketoglutarate dependent halogenases enable the regio- and stereoselective halogenation of inactivated C(sp3)-H bonds. Yet, with only a handful of these halogenases characterized, the biosynthetic potential of enzymatic radical halogenation remains limited. Herein, we describe the remodeling of L-proline cis-4-hydroxylase from Sinorhizobium meliloti into a halogenase by introduction of a single point mutation into the enzyme’s active site (D108G). The re-programmed halogenase displays a striking regio-divergent reaction chemistry: While halogenation of L-proline exclusively occurs at the C3-position, the retained hydroxylation activity leads to derivatization at the C-4 position, corresponding to the regioselectivity of the wildtype enzyme. By employing several rounds of directed evolution, an optimized halogenase variant with 98-fold improved apparent kcat / Km for chlorination of L-proline compared to the parental enzyme SmP4H (D108G) was identified. The development and optimization of this novel halogenation biocatalyst highlights the possibility to rationally harness the chemical versatility of non-heme Fe/αKG dependent dioxygenases for C-H functionalization.

L-5-Hydroxytryptophan is an important amino acid that is widely used in food and medicine. In this study, L-5-hydroxytryptophan was synthesized by a modified tryptophan synthase. A direct evolution strategy was applied to engineer tryptophan synthase from Escherichia coli to improve the efficiency of L-5-hydroxytryptophan synthesis. Tryptophan synthase was modified by error-prone PCR. A high-activity mutant enzyme (V231A/K382G) was obtained by a high-throughput screening method. The activity of mutant enzyme (V231A/K382G) is 3.79 times higher than that of its parent, and kcat/Km of the mutant enzyme (V231A/K382G) is 4.36 mM-1∙s-1. The mutant enzyme (V231A/K382G) reaction conditions for the production of L-5-hydroxytryptophan were 100 mmol/L L-serine at pH 8.5 and 35°C for 15 h, reaching a yield of L-5-hydroxytryptophan of 86.7%. Directed evolution is an effective strategy to increase the activity of tryptophan synthase.

Background Genome-scale metabolic model (GSMM) is a powerful tool for the study of cellular metabolic characteristics. With the development of multi-omics measurement techniques in recent years, new methods that integrating multi-omics data into the GSMM show promising effects on the predicted results. It does not only improve the accuracy of phenotype prediction but also enhances the reliability of the model for simulating complex biochemical phenomena, which can promote theoretical breakthroughs for specific gene target identification or better understanding the cell metabolism on the system level. Results Based on the basic GSMM model iHL1210 of Aspergillus niger, we integrated large-scale enzyme kinetics and proteomics data to establish a GSMM based on enzyme constraints, termed a GEM with Enzymatic Constraints using Kinetic and Omics data (GECKO). The results show that enzyme constraints effectively improve the model’s phenotype prediction ability, and extended the model’s potential to guide target gene identification through predicting metabolic phenotype changes of A. niger by simulating gene knockout. In addition, enzyme constraints significantly reduced the solution space of the model, i.e., flux variability over 40.10% metabolic reactions were significantly reduced. The new model showed also versatility in other aspects, like estimating large-scale $$k_{{cat}}$$ k cat values, predicting the differential expression of enzymes under different growth conditions. Conclusions This study shows that incorporating enzymes’ abundance information into GSMM is very effective for improving model performance with A. niger. Enzyme-constrained model can be used as a powerful tool for predicting the metabolic phenotype of A. niger by incorporating proteome data. In the foreseeable future, with the fast development of measurement techniques, and more precise and rich proteomics quantitative data being obtained for A. niger, the enzyme-constrained GSMM model will show greater application space on the system level.

Background Biodegradation of antibiotics is a promising method for the large-scale removal of antibiotic residues in the environment. However, the enzyme that is involved in the biodegradation process is the key information to be revealed. Results In this study, the beta-lactamase from Ochrobactrumtritici that mediates the biodegradation of penicillin V was identified and characterized. When searching the proteins of Ochrobactrumtritici, the β-lactamase (OtLac) was identified. OtLac consists of 347 amino acids, and predicted isoelectric point is 7.0. It is a class C β-lactamase according to BLAST analysis. The coding gene of OtLac was amplified from the genomic DNA of Ochrobactrumtritici. The OtLac was overexpressed in E. coli BL21 (DE3) and purified with Ni2+ column affinity chromatography. The biodegradation ability of penicillin V by OtLac was identified in an in vitro study and analyzed by HPLC. The optimal temperature for OtLac is 32 ℃ and the optimal pH is 7.0. Steady-state kinetics showed that OtLac was highly active against penicillin V with a Km value of 17.86 μM and a kcat value of 25.28 s−1 respectively. Conclusions OtLac demonstrated biodegradation activity towards penicillin V potassium, indicating that OtLac is expected to degrade penicillin V in the future.

Unspecific peroxygenases (UPOs) enable oxyfunctionalizations of a broad substrate range with unparalleled activities. Tailoring these enzymes for chemo- and regioselective transformations represents a grand challenge due to the difficulties in their heterologous productions. Herein, we performed protein engineering in Saccharomyces cerevisiae using the MthUPO from Myceliophthora thermophila. More than 5300 transformants were screened. This protein engineering led to a significant reshaping of the active site as elucidated by computational modelling. The reshaping was responsible for the increased oxyfunctionalization activity, with improved kcat/Km values of up to 16.5-fold for the model substrate 5-nitro-1,3-benzodioxole. Moreover, variants were identified with high chemo- and regioselectivities in the oxyfunctionalization of aromatic and benzylic carbons, respectively. The benzylic hydroxylation was demonstrated to perform with enantioselectivities of up to 95% ee. The proposed evolutionary protocol and rationalization of the enhanced activities and selectivities acquired by MthUPO variants represent a step forward toward the use and implementation of UPOs in biocatalytic synthetic pathways of industrial interest M.J.W., A.K., and N.H. thank the Bundesministerium für Bildung und Forschung (“Biotechnologie 2020+ Strukturvorhaben: Leibniz Research Cluster”, 031A360B) for generous funding. P.P. thanks the Landesgraduiertenförderung Sachsen- Anhalt for a Ph.D. scholarship. M.G.-B. thanks the Generalitat de Catalunya AGAUR for a Beatriu de Pinós H2020 MSCACofund 2018-BP-00204 project and the Spanish MICINN (Ministerio de Ciencia e Innovación) for PID2019-111300GAI00 project, and J.S. thanks the Spanish MIU (Ministerio de Universidades) for a predoctoral FPU fellowship FPU18/ 02380. The computer resources at MinoTauro and the Barcelona Supercomputing Center BSC-RES are acknowledged (RES-QSB-2019-3-0009 and RES-QSB-2020-2-0016)

Avermectin, produced by Streptomyces avermitilis, is an active compound protective against nematodes, insects, and mites. However, its potential usage is limited by its low aqueous solubility. The uridine diphosphate (UDP)-glycosyltransferase (BLC) from Bacillus licheniformis synthesizes avermectin glycosides with improved water solubility and in vitro antinematodal activity. However, enzymatic glycosylation of avermectin by BLC is limited due to the low conversion rate of this reaction. Thus, improving BLC enzyme activity is necessary for mass production of avermectin glycosides for field application. In this study, the catalytic activity of BLC toward avermectin was enhanced via directed evolution. Three mutants from the BLC mutant library (R57H, V227A, and D252V) had specific glucosylation activity for avermectin 2.0-, 1.8-, and 1.5-fold higher, respectively, than wild-type BLC. Generation of combined mutations via site-directed mutagenesis led to even further enhancement of activity. The triple mutant, R57H/V227A/D252V, had the highest activity, 2.8-fold higher than that of wild-type BLC. The catalytic efficiencies (Kcat/Km) of the best mutant (R57H/V227A/D252V) toward the substrates avermectin and UDP-glucose were improved by 2.71- and 2.29-fold, respectively, compared to those of wild-type BLC. Structural modeling analysis revealed that the free energy of the mutants was - 1.1 to - 7.1 kcal/mol lower than that of wild-type BLC, which was correlated with their improved activity. KEY POINTS: • Directed evolution improved the glucosylation activity of BLC toward avermectin. • Combinatorial site-directed mutagenesis led to further enhanced activity. • The mutants exhibited lower free energy values than wild-type BLC.

The lipopolysaccharide (LPS)-triggered coagulation cascade in horseshoe crabs is composed of three zymogens belonging to the trypsinogen family: prochelicerase C, prochelicerase B (proB) and the proclotting enzyme (proCE). Trypsinogen-family members contain three conserved disulphides located around the active site. While it is known that proB evolutionarily lost one of the disulphides, the His-loop disulphide, the roles of the missing His-loop disulphide in proB remain unknown. Here, we prepared a proB mutant, named proB-murasame, equipped with a regenerated His-loop disulphide. The activation rate by upstream α-chelicerase C for proB-murasame was indistinguishable from that for wild-type (WT) proB. The resulting protease chelicerase B-murasame exhibited an 8-fold higher kcat value for downstream proCE than WT chelicerase B, whereas the Km value of chelicerase B-murasame was equivalent to that of WT chelicerase B. WT serpins-1, -2 and -3, identified as scavengers for the cascade, had no reactivity against WT chelicerase B, whereas chelicerase B-murasame was inhibited by WT serpin-2, suggesting that WT chelicerae B may trigger as-yet-unsolved phenomena after performing its duty in the cascade. The reconstituted LPS-triggered cascade containing proB-murasame exhibited ∼5-fold higher CE production than that containing WT proB. ProB-murasame might be used as a high value-adding reagent for LPS detection.

Modification of aliphatic C–H bonds in a regio- and stereoselective manner can pose a formidable challenge in organic chemistry. In this context, the use of nonheme iron and α-ketoglutarate-dependent dioxygenases (αKGDs) represents an interesting tool for C–H activation as this enzyme family can catalyze a broad set of synthetically valuable reactions including hydroxylations, oxidations, and desaturations. The consensus reaction mechanism of αKGDs proceeds via the formation of a Fe(IV)-oxo complex capable of hydrogen atom transfer (HAT) from an sp3-hybridized substrate carbon center. The resulting substrate radical and Fe(III)–OH cofactor are considered to be the branch point toward the possible reaction outcomes which are determined by the enzyme’s active site architecture. To date, the modulation of the reaction fate in Fe(II)/α-ketoglutarate-dependent dioxygenases via enzyme engineering has been mainly elusive. In this study, we therefore set out to engineer the l-proline cis-4-hydroxylase SmP4H from Sinorhizobium meliloti for selective oxidative modifications of the nonproteinogenic amino acid l-homophenylalanine (l-hPhe) to produce pharmacological relevant small molecule intermediates. Using structure-guided directed evolution, we improved the total turnover number, the kcat, as well as the kcat/Km of the hydroxylation reaction yielding the desired γ-hydroxylation product by approximately 10-fold, >100-fold, and >300-fold, respectively. Notably, the exchange of only one amino acid in the active site (W40Y) allowed us to reprogram the natural hydroxylase to predominantly act as a desaturase, presumably through tyrosine’s capability to serve as a catalytic entity in the reaction mechanism. An investigation of the substrate scope revealed additional acceptance of the noncanonical amino acids l-homotyrosine and (S)-α-amino-3,4-dichlorobenzenebutanoic acid by SmP4H variants.

Herein, a Au-Au/IrO2 nanocomposite with tandem enzyme-mimicking activity was innovatively synthesized, which can show outstanding glucose oxidase (GOx)-like activity and peroxidase-like activity simultaneously under neutral conditions. Moreover, a Au-Au/IrO2@Cu(PABA) reactor was prepared via encapsulation of the Au-Au/IrO2 nanocomposite in a Cu(PABA) metal organic framework. The reactor not only exhibits excellent organic solvent stability, acid resistance, and reusability but also displays better cascade reaction catalytic efficiency (kcat/Km = 148.86 min-1 mM-1) than the natural free enzyme system (GOx/HRP) (kcat/Km = 98.20 min-1 mM-1) and Au-Au/IrO2 nanocomposite (kcat/Km = 135.24 min-1 mM-1). In addition, it is found that the reactor can catalyze glucose or dissolved oxygen to produce active oxygen species (ROS) including HO, 1O2, and O2-· through its enzyme-mimicking activity. Finally, the novel reactor was successfully used in organic dye degradation and antibacterial application. The results show that it can effectively degrade methyl orange, methylene blue, and rhodamine B, which all can reach a degradation rate of nearly 100% after interacting with Au-Au/IrO2@Cu (PABA) for 3.5 h. Furthermore, the reactor also exhibits excellent antibacterial activity, so as to achieve a complete bactericidal effect to Staphylococcus aureus and Escherichia coli at a concentration of 12.5 μg mL-1.

Superoxide dismutases are the enzymes involved in dismutation of superoxide radicals into oxygen and hydrogen peroxide. The present work reports a thermostable Fe/Mn SOD of Geobacillus sp. strain PCH100 (GsSOD) isolated from glacial soil. Purified recombinant GsSOD is a dimeric protein of ~57 kDa that exhibited highest activity at a temperature of 10 °C and pH of 7.8. Maximum enzyme velocity and Michaelis constant of the GsSOD were 1098.90 units/mg and 0.62 μM, respectively. At 80 °C, thermal inactivation rate constant and half-life of GsSOD were 3.33 × 10−3 min−1 and 208 min, respectively. Interestingly, GsSOD tolerated a temperature of 100 °C and 130 °C up to 15 min and 5 min, respectively. Circular dichroism and differential scanning calorimetry confirmed thermostable nature of GsSOD. Apoenzyme of GsSOD regained enzymatic activity in the presence of Fe2+ and Mn2+ as metal ion cofactors. GsSOD was stable under varying concentrations of chemicals, namely ethylenediaminetetraacetic acid, potassium cyanide, hydrogen peroxide, chloroform-ethanol, 3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate, Tween-20, Triton X-100, urea, and guanidine hydrochloride. The enzyme exhibited >70% activity in presence of 10 mM metal ions. Owing to its thermostable nature and resistance to chemical inhibitors, GsSOD is a potential enzyme for industrial applications.

Background: The 26kDa glutathione transferase (GST, EC 2.5.1.18) from Schistosoma japonicum (SjGST) is recognized as the major detoxification enzyme of S. japonicum, a pathogenic helminth causing schistosomiasis. Objective: In the present study, the interaction of the chlorotriazine dye Cibacron blue 3GA (CB3GA) and its structural analogues with SjGST was investigated. The work aimed to shed light on the non-substrate ligand-binding properties of the enzyme. Methods: Kinetic inhibition analysis, affinity labelling experiments and molecular modelling studies were employed. Results: The results showed that CB3GA is a potent inhibitor (IC50 0.057 ± 0.003 μM) towards SjGST. The enzyme was specifically and irreversibly inactivated by the dichlorotriazine-analogue of CB3GA (IC50 0.190 ± 0.024 μM), following a biphasic pseudo-first-order saturation kinetics with approximately 1 mol of inhibitor per mol of the dimeric enzyme being incorporated. All other monochlorotriazine analogues behave as reversible inhibitors with lower inhibition potency (IC50 5.2-82.3 μM). Kinetic inhibition studies, together with molecular modelling and molecular dynamics simulations, established that the CB3GA binding site overlaps both the G- and H-sites. Both hydrophobic/ polar interactions, as well as steric effects, have decisive roles in determining the inhibitory strength of CB3GA and its analogues. Conclusion: The results of the present study might be useful in future drug design and development efforts towards SjGST.

Fucosylated oligosaccharides present in human milk perform various biological functions that benefit infants’ health. These compounds can be also obtained by enzymatic synthesis. In this work, the effect of the immobilization of α-l-fucosidase from Thermotoga maritima on the synthesis of fucosylated oligosaccharides was studied, using lactose and 4-nitrophenyl-α-l-fucopyranoside (pNP-Fuc) as acceptor and donor substrates, respectively, and Eupergit® CM as an immobilization support. The enzyme was immobilized with 90% efficiency at pH 8 and ionic strength of 1.5 M. Immobilization decreased enzyme affinity for the donor substrate as shown by a 1.5-times higher KM value and a 22-times decrease of the kcat/KM ratio in comparison to the unbound enzyme. In contrast, no effect was observed on the synthesis/hydrolysis ratio (rs/rh) when α-l-fucosidase was immobilized. Also, the effect of initial concentration of substrates was studied. An increase of the acceptor concentration improved the yields of fucosylated oligosaccharides regardless enzyme immobilization. The synthesis yields of 38.9 and 40.6% were obtained using Eupergit® CM-bound or unbound enzyme, respectively, and 3.5 mM pNP-Fuc and 146 mM lactose. In conclusion, α-l-fucosidase from Thermotoga maritima was efficiently immobilized on Eupergit® CM support without affecting the synthesis of fucosylated oligosaccharides.

The dauc‐8‐en‐11‐ol synthase from Streptomyces venezuelae was investigated for its catalytic activity towards alternative terpene precursors, specifically designed to enable new cyclisation pathways. Exchange of aromatic amino acid residues at the enzyme surface by site‐directed mutagenesis led to a 4‐fold increase of the yield in preparative scale incubations, which likely results from an increased enzyme stability instead of improved enzyme kinetics., Daucenol Synthase (DcS) from Streptomyces venezuelae was redirected using substrate analogues with additional, shifted, or lacking methyl groups to yield molecules from a naturally difficult to access chemical space, and improved in its catalytic efficiency through site‐directed mutagenesis of surface residues, turning DcS into a high yielding biocatalyst.