Search

Biodiesel has the potential to serve as a feasible substitute for fossil fuels in many sectors, including transportation and internal combustion engines, without requiring extensive modifications. UsinHemg alternative energy sources, including biodiesel, is necessary to effectively tackle the growing demand predominantly observed in the transportation sector. This review is aimed to examine the technological progress, potential benefits, obstacles, and prospects associated with using biodiesel in India. India exhibits a significant potential for biodiesel production due to the abundance of various biofuel crops within its territory. The information supplied includes recent information from official government reports and literature. Collaborative efforts among all stakeholders in the energy industry can achieve the realization of reducing imports of petroleum-based fuel. However, it is essential to consider several significant elements specific to the Indian context when considering the utilization of biodiesel. The reported findings in this research are expected to shed light on the current and prospects of biodiesel deployment in India., (© 2024 Wiley Periodicals LLC.)

Uncontrolled emissions, massive price increases, and other factors encourage searching for a suitable diesel engine fuel alternative. In its processed form, vegetable oil biodiesel is an appealing green alternative fuel for compression ignition engines. Vegetable oil esters have qualities comparable to those of standard diesel fuel. As a result, biodiesel may be utilized to run a diesel engine without any further alterations. This article analyses the potential of Phoenix sylvestris oil, which may be found in forest belts across the globe, as a viable feedstock for biodiesel extraction. Phoenix sylvestris oil is found to be abundant in different forest belts worldwide. The free fatty acid must first be transformed into esters using catalytic acid esterification before proceeding to alkaline catalytic esterification. The molar ratio (6:1), catalyst concentration (1 wt%), reaction temperature (60 °C), and reaction time (2 h) have all been optimized for biodiesel extraction. Biodiesel produced had characteristics that were similar to standard biodiesel specifications. The biodiesel yield from Phoenix sylvestris oil was 92.3% under optimum conditions. The experimental results revealed that the Phoenix sylvestris oil biodiesel performed better than neat Phoenix sylvestris oil and its blends. Phoenix sylvestris oil blend produced better brake thermal efficiency with lower smoke, hydrocarbon, and CO emissions. The biodiesel produced from non-edible Phoenix sylvestris oil has the potential to be employed as a viable alternative to diesel fuel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

This work examines the effect of ultrasound irradiation (UI) on biodiesel properties and transesterification parameters. Methanol content, reaction time, reaction temperature, and catalyst concentration are varied, and the optimum condition for maximum possible yield was held constant for both processes. Biodiesel obtained from non-edible oils is the most promising alternative fuel for conventional diesel fuel. In this study, sterculia foetida seed oil was used for biodiesel production. Sterculia foetida oil was transesterified to lower its FFA using UI and compared with the conventional process. Both heating processes were optimized to yield a maximum of 94.3% at a six molar ratio, 50 °C, (water temp), 1% wt of catalyst (KOH), and 75 min reaction time. Transesterification by UI reduced the total reaction time to 4 min compared to 75 min at the conventional process. Further UI influenced the properties of biodiesel (SOBD) from SO. UI lowered viscosity by 7.3% and density by 5.5% and facilitated using oxygen content of SOBD., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This work analyses the performance and emission characteristics of biofuelled compression ignition (C.I) engine with the implementation of an antioxidant. Using the transesterification process with sodium hydroxide as a catalyst, the beef tallow methyl ester (BTME) was obtained from the beef tallow oil. Poor physical properties of biodiesel (beef tallow oil (BTO)) namely high viscosity and density cause atomization problems leading to higher smoke, hydrocarbon and carbon monoxide emissions. The purpose of this work is to enhance the performance aspects, to limit smoke emissions from BTO operation and to examine the possibility of direct use of neat BTO in CI engine. This research paves a way of investing the impact of binary blends of BHA and BTO on the research engine. The experiments were conducted on a single-cylinder four-stroke C.I engine using the following fuel compositions: 20% of BTME mixed with 80% diesel (B20), 1000 ppm mono-phenolic antioxidant (butylated hydroxyanisole (BHA)) mixed with the blends of B20 (B20 + BHA), and 100% diesel. Based on the experimental results, it was found that the brake thermal efficiency (BTE) increases by 1.8% and the brake specific fuel consumption (BSFC) decreases by 2.5% for the fuel blend B20 + BHA when compared with that for B20 fuel blend. Compared with the B20 blend, the blend B20 + BHA emits 12.2% lesser nitrogen oxide due to breaking chain reactions, scavenging the initiating radicals and reducing the concentration of reactive radicals.

This work investigates the experimental study to examine the operation characteristics of a neat neem oil methyl ester (BD100) along with silver oxide nano-particles as a metal-based additive in various mass fractions. Silver oxide nano-particle is mixed into 100% of BD100 at 5 and 10 ppm. The experimental investigation on diesel engine reveals that the addition of silver oxide nano-particles to BD100 resulted in enhancement of brake thermal efficiency (BTE) with a reduction in brake specific fuel consumption (BSFC). The tested emission parameters such as CO, HC, NOx, and smoke were decreased by 12.22, 10.89, 4.24, and 6.61% for BD100+ Ag 2 O (5 ppm) and 16.47, 14.21, 6.66, and 8.34% for BD100 respectively when compared to BD100. Overall, improvement in ignition characteristics of the engine was finer by adding 5 and 10 ppm of silver oxide nano-particle to BD100 on account of the enhanced surface area to volume ratio.

The current work focuses on the experimental investigation to analyze the combustion and emission characteristics of a direct injection diesel engine fueled with neat biodiesel (BD100) and different proportions of cyclohexanol blends as a fuel additive in various volume fractions. Cyclohexanol is dispersed into a neat biodiesel in a volume fraction of 10, 20, and 30 vol%. The biodiesel is produced from neem oil by the conventional transesterification process. The experimental results revealed that with the increased cyclohexanol fraction, the combustion was found smooth. The addition of cyclohexanol has a positive influence on various physical and chemical properties of neat biodiesel. The in-cylinder pressure is comparatively low for diesel followed by cyclohexanol and biodiesel blends when compared with neat biodiesel. This is due to shorter ignition delay period. The heat-release rate of neat biodiesel is the highest among all fuels. The overall HC emission of BD70COH30 is 12.19% lower than BD100 and 16.34% lower than diesel. The overall CO 2 emission of BD70COH30 is 13.91% higher than BD100 and 19.5% higher than diesel. The overall NO x emission of BD70COH30 is 5.31% lower than BD100 at all load engine operations. The presence of 10, 20, and 30% of cyclohexanol in biodiesel decreased smoke emissions as compared with neat biodiesel and diesel. The overall smoke emission of BD70COH30 is 19.23% lower than BD100 and 25.51% lower than diesel. The overall CO emission of cyclohexanol blended with biodiesel by 30 vol% (BD70COH30) is 17% lower than neat biodiesel and 21.8% lower than diesel. Based on the outcome of this study, neem oil biodiesel and cyclohexanol blends can be employed as a potential alternative fuel for existing unmodified diesel engines owing to its lesser emission characteristics.

In this study, the effect of blending pentanol to biodiesel derived from mahua oil on emissions and performance pattern of a diesel engine under exhaust gas recirculation (EGR) mode was examined and compared with diesel. The purpose of this study is to improve the feasibility of employing biofuels as a potential alternative in an unmodified diesel engine. Two pentanol-biodiesel blends denoted as MOBD90P10 and MOBD80P20 which matches to 10 and 20 vol% of pentanol in biodiesel, respectively, were used as fuel in research engine at 10 and 20% EGR rates. Pentanol is chosen as a higher alcohol owing to its improved in-built properties than the other first-generation alcohols such as ethanol or methanol. Experimental results show that the pentanol and biodiesel blends (MOBD90P10 and MOBD80P20) have slightly higher brake thermal efficiency (0.2-0.4%) and lower brake-specific fuel consumption (0.6 to 1.1%) than that of neat biodiesel (MOBD100) at all engine loads. Nitrogen oxide (NOx) emission and smoke emission are reduced by 3.3-3.9 and 5.1-6.4% for pentanol and biodiesel blends compared to neat biodiesel. Introduction of pentanol to biodiesel reduces the unburned hydrocarbon (2.1-3.6%) and carbon monoxide emissions (3.1-4.2%) considerably. In addition, at 20% EGR rate, smoke, NO X emissions, and BTE drop by 7.8, 5.1, and 4.4% respectively. However, CO, HC emissions, and BSFC increased by 2.1, 2.8, and 3.8%, respectively, when compared to 0% EGR rate.

Biodiesels derived from the mahua seeds are established as a promising alternative for the diesel fuel owing to its non-edible nature and improved properties. TiO 2 nanoparticle in powder form is added to neat mahua oil biodiesel (BD100) to examine its effect on emission characteristics. TiO 2 nanoparticle is chosen as an additive owing to its catalytic effect, higher surface energy, and larger surface to volume ratio. TiO 2 nanoparticle with an average size of 60 nm was synthesized by sol-gel route. TiO 2 nanoparticles are added with mahua biodiesel (BD100) at 100 and 200 ppm. Mahua oil biodiesel doped with 100 and 200 ppm of TiO 2 nanoparticles are referred as BD100T100 and BD100T200. A constant speed diesel engine is employed for the experimental trail. Engine is fueled with diesel, BD100, BD100T100, and BD100T200, respectively. Experimental result confirmed that the modified fuels (BD100T200 and BD100T100) showed a significant reduction in all the emissions. Further, the addition of TiO 2 nanoparticle (200 ppm) to mahua biodiesel gave respective reduction of 9.3, 5.8, 6.6, and 2.7% in carbon monoxide, hydrocarbon, nitrogen oxide, and smoke emissions when compared to neat mahua biodiesel.

The present work is intended to investigate the emission characteristics of neat cashew nut shell methyl ester (CNSME100) by adding pentanol at two different proportions and compared with the baseline diesel. CNSME100 is prepared by the conventional transesterification process. CNSME100 is chosen due to its non-edible nature. Pentanol is chosen as an additive because of its higher inbuilt oxygen content and surface to volume ratio which reduces the drawbacks of neat CNSME100. Emission characteristics were carried out in single cylinder naturally aspirated CI engine fuelled with neat cashew nut shell methyl ester (CNSME), cashew nut shell methyl ester and pentanol by 10% volume (CNSME90P10), cashew nut shell methyl ester and pentanol by 20% volume (CNSME80P20), and diesel. This work also aims to investigate the feasibility of operating an engine fuelled with neat methyl ester and alcohol blends. Experimental results showed that by blending higher alcohol to neat cashew nut shell methyl ester reduces the emissions significantly. It is also found that the emission from neat methyl ester and pentanol blends is lesser than diesel at all loads.