Search

Gravity-driven microfluidics, which utilizes gravity force to drive liquid flow, offers portability and multi-condition setting flexibility because they do not require pumps or connection tubes to drive the flow. However, because the flow rate decreases with time in gravity-driven microfluidics, it is not suitable for stem cell experiments, which require long-term (at least a day) stability. In this study, gravity-driven microfluidics and a slow-tilting table were developed to culture cells under constant unidirectional perfusion. The microfluidic device was placed on a slow-tilting table, which tilts unidirectionally at a rate of approximately 7° per day to compensate for the reduction in the flow rate. Computational simulations showed that the pulsation of the flow arising from the stepwise movement of the table was less than 0.2%, and the flow was laminar. Hydrophilization of the tanks increased the flow rate, which is consistent with the theoretical values. We showed that vitronectin is better than laminin 511 fragments as a coating material for adhering human induced pluripotent stem cells on a microchamber made of polydimethylsiloxane, and succeeded in culturing the cells for 3 days. It is believed that the system offers easy-to-use cell culture tools, such as conventional multiwell culture vessels, and enables the control of the cell microenvironment.

Here we report the perfusion culture of a multi-layered tissue composed of HepG2 cells (a human hepatoma line) in a pressure-driven microphysiological system (PD-MPS), which we developed previously as a multi-throughput perfusion culture platform. The perfusion culture of multi-layered tissue model was constructed by inserting a modified commercially available permeable membrane insert into the PD-MPS. HepG2 cells were layered on the membrane, and culture medium was perfused both through and below the membrane. The seeded density (number of cells/cm

This paper reports perfusion culture of human umbilical vein endothelial cells (HUVECs) on a microporous membrane in a pressure-driven microphysiological system (PD-MPS), which we developed previously as a multi-throughput perfusion culture platform. We designed fluidic culture unit with microporous membrane to culture HUVECs under fluidic shear stress and constructed a perfusion culture model in the PD-MPS platform. Four fluidic culture units were arranged in the microplate-sized device, which enables four-throughput assay for characterization of HUVECs under flow. Medium flow was generated above and below the membrane by sequential pneumatic pressure to apply physiological shear stress to HUVECs. HUVECs exhibited aligned morphology to the direction of the flow with shear stress of 11.5-17.7 dyn/cm

The microphysiological system (MPS) is a promising tool for predicting drug disposition in humans, although limited information is available on the quantitative assessment of sequential drug metabolism in MPS and its extrapolation to humans. In the present study, we first constructed a mechanism-based pharmacokinetic model for triazolam (TRZ) and its metabolites in the entero-hepatic two-organ MPS, composed of intestinal Caco-2 and hepatic HepaRG cells, and attempted to extrapolate the kinetic information obtained with the MPS to the plasma concentration profiles in humans. In the two-organ MPS and HepaRG single culture systems, TRZ was found to be metabolized into α- and 4-hydroxytriazolam and their respective glucuronides. All these metabolites were almost completely reduced in the presence of a CYP3A inhibitor, itraconazole, confirming sequential phase I and II metabolism. Both pharmacokinetic model-dependent and -independent analyses were performed, providing consistent results regarding the metabolic activity of TRZ: clearance of glucuronidation metabolites in the two-organ MPS was higher than that in the single culture system. The plasma concentration profile of TRZ and its two hydroxy metabolites in humans was quantitatively simulated based on the pharmacokinetic model, by incorporating several scaling factors representing quantitative gaps between the MPS and humans. Thus, the present study provided the first quantitative extrapolation of sequential drug metabolism in humans by combining MPS and pharmacokinetic modeling.

The use of organ-on-a-chip (OOC) devices is a promising alternative to existing cell-based assays and animal testing in drug discovery. A rapid prototyping method with polydimethylsiloxane (PDMS) is widely used for developing OOC devices. However, because PDMS tends to absorb small hydrophobic molecules, the loss of test compounds in cell-based assays and increases in background fluorescence during observation often lead to biased results in cell-based assays. To address this issue, we have fabricated a glass-based OOC device and characterized the medium flow and molecular absorption properties in comparison with PDMS-based devices. Consequently, we revealed that the glass device generated a stable medium flow, restricted the absorption of small hydrophobic molecules, and showed enhanced cell adhesiveness. This glass device is expected to be applicable to precise cell-based assays to evaluate small hydrophobic molecules, for which PDMS devices cannot be applied because of their absorption of small hydrophobic molecules.

Spatial pattern formation is a critical step in embryogenesis. Bone morphogenetic protein 4 (BMP4) and its inhibitors are major factors for the formation of spatial patterns during embryogenesis. However, spatial patterning of the human embryo is unclear because of ethical issues and isotropic culture environments resulting from conventional culture dishes. Here, we utilized human pluripotent stem cells (hiPSCs) and a simple anisotropic (unidirectional perfusion) culture chamber, which creates unidirectional conditions, to measure the cell community effect. The influence of cell density on BMP4-induced differentiation was explored during static culture using a conventional culture dish. Immunostaining of the early differentiation marker SSEA-1 and the mesendoderm marker BRACHYURY revealed that high cell density suppressed differentiation, with small clusters of differentiated and undifferentiated cells formed. Addition of five-fold higher concentration of BMP4 showed similar results, suggesting that suppression was not caused by depletion of BMP4 but rather by high cell density. Quantitative RT-PCR array analysis showed that BMP4 induced multi-lineage differentiation, which was also suppressed under high-density conditions. We fabricated an elongated perfusion culture chamber, in which proteins were transported unidirectionally, and hiPSCs were cultured with BMP4. At low density, the expression was the same throughout the chamber. However, at high density, SSEA-1 and BRACHYURY were expressed only in upstream cells, suggesting that some autocrine/paracrine factors inhibited the action of BMP4 in downstream cells to form the spatial pattern. Human iPSCs cultured in a perfusion culture chamber might be useful for studying in vitro macroscopic pattern formation in human embryogenesis.

We report a sharp photoinduced aqueous dissolution of the copolymer through phase transition based on the photochemical reaction of o-nitrobenzaldehyde (NBA) and the principle of polymer effect. We synthesized the copolymers having poly( N-isopropylacrylamide) main chain and NBA side chain at 4, 7, and 10 mol % functionalizations and analyzed their photoresponsive characteristics. Light with 365 nm wavelength converted NBA groups at copolymer side chains to carboxylic acid efficiently at the rate of 7.3 cm2/J, and in the case of 10 mol % functionalization, the irradiation dosage no more than 56 mJ/cm2 induced sharp aqueous dissolution of the copolymer thin layer in pH 7.4 at 25 °C. As example applications, we demonstrated on-demand release of polyethylene beads and fluorescent-labeled albumins, which had been immobilized on a substrate surface via the copolymers, by the precisely controlled light irradiation using a microprojection system. Also, we examined application of the copolymers to the selective recovery of living cells from culture substrate under microscopic observation. As a result, mild light irradiation at room temperature triggered immediate detachment of the cultured adherent cells only in the irradiated areas without critical influence on their viability.

In vertebrate development, bone morphogenetic protein (BMP) 4 and its inhibitor, Noggin, are important factors determining differentiation patterns along the body axis. In a previous study on the effects of BMP4 on cell differentiation using a perfusion culture chamber and human induced pluripotent stem (iPS) cells, we found that cells located upstream of the chamber differentiated, whereas those located downstream remained undifferentiated. Noggin specifically binds to BMP4 and prevents it from binding to BMP receptors. Therefore, cell differentiation pattern may be attributed to the spatial pattern of secreted Noggin to inhibit differentiation. In this study, we simulated concentrations of BMP4, Noggin, and BMP4-Noggin complex as a reaction-diffusion model, under three experimental conditions. We considered four boundary conditions for differentiation and Noggin secretion. The optimal simulation conditions that mimic cell differentiation were determined by comparing the experimental and simulation results. The simulation demonstrated that the two boundary conditions where cells secreted Noggin before differentiation marker expression, matched the experimental results of our previous work and references. Thus, the spatial pattern of cell differentiation can be attributed to the distribution of Noggin secreted before differentiation marker expression and to the reaction-diffusion of BMP4 and Noggin.

Here, we report a pneumatic pressure-driven microfluidic device capable of multi-throughput medium circulation culture. The circulation culture system has the following advantages for application in drug discovery: (i) simultaneous operation of multiple circulation units, (ii) use of a small amount of circulating medium (3.5 mL), (iii) pipette-friendly liquid handling, and (iv) a detachable interface with pneumatic pressure lines via sterile air-vent filters. The microfluidic device contains three independent circulation culture units, in which human umbilical vein endothelial cells (HUVECs) were cultured under physiological shear stress induced by circulation of the medium. Circulation of the medium in the three culture units was generated by programmed sequentially applied pressure from two pressure-control lines. HUVECs cultured in the microfluidic device were aligned under a one-way circulating flow with a shear stress of 10 dyn cm(-2); they exhibited a randomly ordered alignment under no shear stress and under reciprocating flow with a shear stress of 10 dyn cm(-2). We also observed 2.8- to 4.9-fold increases in expression of the mRNAs of endothelial nitric oxide synthase and thrombomodulin under one-way circulating flow with a shear stress of 10 dyn cm(-2) compared with conditions of no shear stress or reciprocating flow.

This paper reports a multi-throughput multi-organ-on-a-chip system formed on a pneumatic pressure-driven medium circulation platform with a microplate-sized format as a novel type of microphysiological system. The pneumatic pressure-driven platform enabled parallelized multi-organ experiments (i.e. simultaneous operation of multiple multi-organ culture units) and pipette-friendly liquid handling for various conventional cell culture experiments, including cell seeding, medium change, live/dead staining, cell growth analysis, gene expression analysis of collected cells, and liquid chromatography–mass spectrometry analysis of chemical compounds in the culture medium. An eight-throughput two-organ system and a four-throughput four-organ system were constructed on a common platform, with different microfluidic plates. The two-organ system, composed of liver and cancer models, was used to demonstrate the effect of an anticancer prodrug, capecitabine (CAP), whose metabolite 5-fluorouracil (5-FU) after metabolism by HepaRG hepatic cells inhibited the proliferation of HCT-116 cancer cells. The four-organ system, composed of intestine, liver, cancer, and connective tissue models, was used to demonstrate evaluation of the effects of 5-FU and two prodrugs of 5-FU (CAP and tegafur) on multiple organ models, including cancer and connective tissue.

We developed a microfluidic perfusion cell culture chip that provides three different shear stress strengths and a large cell culture area for the analysis of vascular endothelial functions. The microfluidic network was composed of shallow flow-control channels of three different depths and deep cell culture channels. The flow-control channels with high fluidic resistances created shear stress strengths ranging from 1.0 to 10.0 dyn/cm(2) in the cell culture channels. The large surface area of the culture channels enabled cultivation of a large number (approximately 6.0 × 10(5)) of cells. We cultured human umbilical vein endothelial cells (HUVECs) and evaluated the changes in cellular morphology and gene expression in response to applied shear stress. The HUVECs were aligned in the direction of flow when exposed to a shear stress of 10.0 dyn/cm(2). Compared with conditions of no shear stress, endothelial nitric oxide synthase mRNA expression increased by 50% and thrombomodulin mRNA expression increased by 8-fold under a shear stress of 9.5 dyn/cm(2).

Human induced pluripotent stem cells (hiPSCs) are a promising cell source for drug screening. For this application, self-renewal or differentiation of the cells is required, and undefined factors in the culture conditions are not desirable. Microfluidic perfusion culture allows the production of small volume cultures with precisely controlled microenvironments, and is applicable to high-throughput cellular environment screening. Here, we developed a microfluidic perfusion culture system for hiPSCs that uses a microchamber array chip under defined extracellular matrix (ECM) and culture medium conditions. By screening various ECMs we determined that fibronectin and laminin are appropriate for microfluidic devices made out of the most popular material, polydimethylsiloxane (PDMS). We found that the growth rate of hiPSCs under pressure-driven perfusion culture conditions was higher than under static culture conditions in the microchamber array. We applied our new system to self-renewal and differentiation cultures of hiPSCs, and immunocytochemical analysis showed that the state of the hiPSCs was successfully controlled. The effects of three antitumor drugs on hiPSCs were comparable between microchamber array and 96-well plates. We believe that our system will be a platform technology for future large-scale screening of fully defined conditions for differentiation cultures on integrated microfluidic devices.

Mass transport phenomena in cell culture can be formulated by using classical reaction-diffusion equations; however, in practice, it is difficult to solve these equations analytically. Here, we used computer simulation to solve these equations, and compared the time-dependent concentration profile of substances in conventional static culture with that in perfusion culture. The simulated glucose consumption in static culture agreed with that of actual culture conditions used in a general cell culture experiment. The simulation of perfusion culture revealed that the geometry of the chamber and its operating parameters are critical to obtaining a sufficient supply of substances. We also found that the previously reported perfusion chambers are well designed and operate under adequate conditions. Our kinetic model of time-dependent concentration profiles for general substances based on mass transport phenomena could, therefore, be used for the optimal design of a microfluidic perfusion culture chip.

We developed a novel microfluidic device to prepare monodisperse water-in-oil-in-water (W/O/W) emulsions with an ultra-thin (1 microm) oil phase layer. This microfluidic device was composed of two microchannel junctions, one of which had a step structure, and a uniformly hydrophobic surface for effective oil removal from W/O/W droplets. At the first junction, an internal aqueous phase was transformed into slug-shaped water-in-oil (W/O) droplets by a flow-focusing mechanism. At the second junction equipped with the step structure, the preformed slug-shaped W/O droplets were introduced into an external aqueous phase and were transformed into spherical W/O droplets. In the downstream area of the second junction, the W/O droplets were released from the hydrophobic surface of the microchannel into the external aqueous phase by inertial lift force and were transformed into W/O/W droplets. During this process, most of the oil phase was effectively removed from the W/O droplets: the bulk of the oil phase flowed along the hydrophobic surface of the microchannel. The thickness of the oil phase layer of the resulting W/O/W droplets was ultra-thin, less than 1 microm. The volume of the internal aqueous phase of the W/O/W droplets reflected that of the W/O droplets and was controlled by the flow rates of the internal aqueous phase and oil phase during W/O droplet formation. We successfully demonstrated encapsulation of water-soluble molecules and polymer particles into the prepared W/O/W emulsion.

Hydroxyapatite (HAP) was mineralized in poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAA) complex hydrogel immersed in a salt solution containing PAA. The transparent HAP/polymer composite swelled in water depending on the HAP content; high HAP content gave small swelling and vice versa. The HAP content reached about 80 wt % at most. Observation of the cross section of the composite by energy-dispersive analysis of X-ray (EDAX) revealed that the composite consisted of two phases, i.e., a hard HAP-rich phase and a soft polymer-rich phase. In the HAP-rich phase, the space inside the hydrogel was occupied by HAP, while HAP was not mineralized in the polymer-rich phase. The nucleation seemed to take place, at first, at the middle depth of the hydrogel where the HAP-rich phase was formed. The HAP-rich phase grew its size toward the surface of the hydrogel at the cost of the polymer-rich phase. The presence of phosphorus, P, in the polymer-rich phase indicated the adsorption of HPO(4)(2-) on the polymer chain of the hydrogel via hydrogen bonding, accompanied with Ca(2+) because of electrostatic constraints. This adsorption of ions in addition to Donnan distribution of ions leads to the formation of a hypercomplex that can be regarded as a precursor of the HAP-rich phase. The change of the hypercomplex into the HAP-rich phase is discontinuous and hence concluded as a phase transition. By comparison of our mineralization system with the biomineralization system of HAP and CaCO(3), the physicochemical mechanism of the mineralization process in the present system was found to be similar to that in biological systems. In this sense, we termed the present system an artificial biomineralization system.

A rapid and simple selection method of high-yield cells has been desired to establish highly productive cell lines for useful secondary metabolites. For this purpose, a new attempt was made to partition cultured plant cells in a poly(ethylene glycol)-dextran aqueous two-phase system (ATPS). The applicability of the ATPS in partitioning cultured strawberry cells (designated FAW) was investigated. The result of single-step partitioning in the ATPS supplemented with 0.4 mmol/kg lithium sulfate showed that FAW cells cultivated for 7 d under light-irradiation were separated into two cell populations with significantly different anthocyanin content. Additionally, the analysis technique of microscopic cell images showed that cells accumulating a high level of anthocyanin were partitioned completely into the bottom phase in a partitioning experiment of FAW cells cultivated for 10 d under light-irradiation in the ATPS supplemented with 1.8 mmol/kg potassium phosphate buffer. These results indicated that cell partitioning in ATPS increased the intracellular anthocyanin content and that the cultured strawberry cell population was heterogeneous in terms of cell surface properties. This is the first report of partitioning based on the heterogeneity of the cell surface properties correlated with the intracellular secondary metabolism in cultured plant cells. Our results also suggested that the ATPS was appropriate as a large-scale method for selecting useful cell lines among the cultured plant cells.

The oxygen distribution in various bio-hybrid systems composed of cellular tissue on an artificial scaffold was estimated by mathematically modeling the oxygen consumption and diffusion. Mathematical models were established for practical systems such as bio-hybrid artificial liver (BAL) and bio-hybrid blood vessels, and the calculated results were compared with corresponding experimental data. Analysis of a spherical organoid (“spheroid”) composed of hepatic cells suggested that the oxygen consumption rate in hepatocyte spheroids incubated in a BAL is one or two orders of magnitude larger than the total average value that had been calculated for various organs. A model was established for a BAL system on a scaffold of commercially available hollow fiber (typical inner and outer radii of 150 and 200 μm) to determine the optimal conditions under which the hepatocytes can be packed as closely as possible into the hollow fiber lumen while still maintaining viability without falling into oxygen deficiency. A model of bio-hybrid blood vessels formed by vascular endothelial cells incubated on the inner wall of a hollow fiber scaffold was used to estimate the maximum thickness of viable endothelial tissue under various conditions of outer partial oxygen pressure and different sizes and permeabilities of the hollow fiber scaffold. The model suggested that the oxygen supply becomes quite restricted when the hollow fiber membrane is thicker than 100 μm; the thickness of the endothelium in a 500 μm-thick hollow fiber membrane was estimated to be 7 μm at most, even when the membrane permeability was as large as that of the culture medium.

Collagen gel was prepared by an ordinary method as that used for preparing a cell-culture medium from an aqueous type-1 atelocollagen solution through crosslinking with glutaraldehyde (GA). Solute diffusivity in the gels prepared in the different conditions was discussed, being related to their water content. The water content of the gel decreased with increasing GA concentration at crosslinking but the solute diffusivity in the gel hardly changed. On the other hand, collagen concentration, at crosslinking of the collagen solution, dramatically affected the solute diffusivity of the obtained gel, although the water content of the gel was not changed and maintained at higher value around 0.9. The inconsistency suggested that the gel had a heterogeneous microstructure although the content of the gel was almost water. This result suggests that the process to prepare collagen medium for cell culture affects cell growth in the case that mass transfer is dominant.

Human induced pluripotent stem cells (hiPSCs) are a promising source of cells for medical applications. Recently, the development of polydimethylsiloxane (PDMS) microdevices to control the microenvironment of hiPSCs has been extensively studied. PDMS surfaces are often treated with low-pressure air plasma to facilitate protein adsorption and cell adhesion. However, undefined molecules present in the serum and extracellular matrix used to culture cells complicate the study of cell adhesion. Here, we studied the effects of vitronectin and γ-globulin on hiPSC adhesion to plasma-treated and untreated PDMS surfaces under defined culture conditions. We chose these proteins because they have opposite properties: vitronectin mediates hiPSC attachment to hydrophilic siliceous surfaces, whereas γ-globulin is adsorbed by hydrophobic surfaces and does not mediate cell adhesion. Immunostaining showed that, when applied separately, vitronectin and γ-globulin were adsorbed by both plasma-treated and untreated PDMS surfaces. In contrast, when PDMS surfaces were exposed to a mixture of the two proteins, vitronectin was preferentially adsorbed onto plasma-treated surfaces, whereas γ-globulin was adsorbed onto untreated surfaces. Human iPSCs adhered to the vitronectin-rich plasma-treated surfaces but not to the γ-globulin-rich untreated surfaces. On the basis of these results, we used perforated masks to prepare plasma-patterned PDMS substrates, which were then used to pattern hiPSCs. The patterned hiPSCs expressed undifferentiated-cell markers and did not escape from the patterned area for at least 7 days. The patterned PDMS could be stored for up to 6 days before hiPSCs were plated. We believe that our results will be useful for the development of hiPSC microdevices.

We describe microcompartmentalized cell-free protein synthesis in semipermeable microcapsules prepared from water-in-oil-in-water droplets by a rupture-induced encapsulation method. An aqueous solution of template DNA coding for green fluorescent protein and enzymes for the cell-free protein synthesis was aliquoted into water-in-oil droplets using a microfluidic device, and the droplets were transformed into semipermeable microcapsules. Substrates for protein synthesis diffused into the microcapsules through their semipermeable polyion complex membranes composed of polyethylenimine-coated alginate. Cell-free protein synthesis was confirmed by detection of the fluorescence of the synthesized green fluorescence protein in the microcapsules. We also used this microcompartmentalized system to synthesize protein from a single molecule of template DNA encapsulated by limiting dilution.

As a powerful tool of cell screening and cell purification, we developed a novel method to kill adherent cells as cultured on a substrate by micro-projection of incoherent visible light. To kill the cells by the mild light irradiated by electrically controllable micro-projection systems currently available, we introduced the assist of the photo-responsive culture substrates functionalized with a photo-acid-generating polymer. In clear contrast to the existing laser-based methods requiring point scanning, areal micro-projection of blue light with the wavelength 436 nm killed many CHO-K1 cells at a time in the irradiated area on the substrate. The effect of the photo-generated acid was so confined that selective killing of targeted cells was achieved without critical damage to the neighboring cells. Further, we demonstrated the photo-selective killing of the adherent cells after preliminarily patterning through the photo-induced removal of cell adhesion-inhibiting polymer.

We have developed a microarray of cell culture environments composed of a combination of soluble factors and extracellular matrices for screening of cell culture environment.

This paper reports a novel formation method of monodisperse calcium alginate microbeads from water-in-oil-in-water (W/O/W) droplets with an ultra-thin oil phase layer. W/O/W droplets containing sodium alginate in an internal aqueous phase were formed as a template of calcium alginate microbeads using a microfluidic device. The ultra-thin oil phase layer of the W/O/W droplets was ruptured by an osmotic pressure difference between the internal and external aqueous phase. Immediately after the rupture, polyanionic alginate in the internal aqueous phase was cross-linked with calcium ion diffused from the external aqueous phase, and monodisperse and spherical calcium alginate microbeads were formed.

The superstructure of polymer alloys that is responsible for their function is best controlled by varying the polymers, polymer blend ratio, solvents, temperature, or all four. Dialysis membranes made of polymer alloys can have varying pure water and solute permeabilities, pore sizes, pore size distributions, and mechanical strengths when wet. Resistance to heat and mass transfer can also vary. The optimal superstructure design of a polymer alloy dialysis membrane enables it to remove efficiently newly identified uremic toxins with higher molecular weights from patients on hemodialysis. The authors prepared new hollow fiber dialysis membranes using a polyethersulfone/polyacrylate (PEPA) polymer alloy, and evaluated pure water and solute permeabilities and reflection coefficients that are dependent upon the superstructure of the PEPA membranes. The new PEPA membranes are asymmetric, with skin layers on either side. The values for pure water permeability and overall mass transfer coefficients for urea, creatinine, and vitamin B12 are quite adequate for hemodialysis. The reflection coefficients for substances with molecular weights greater than 3,000 are strongly dependent upon the conditions under which the membranes were prepared. The values for cytochrome C permeability ranged from 0.42 to 0.71 microns/s.

This paper reports a serial dilution microfluidic network composed of microchannels with a high fluidic-resistance ratio for generating linear concentration profiles as well as logarithmic concentration profiles spanning 3 and 6 orders of magnitude. The microfluidic networks were composed of thin fluidic-resistance microchannels with 160 to 730 microm(2) cross-sectional areas and thick diffusion-mixing microchannels with 3,600 to 17,000 microm(2) cross-sectional areas, and were fabricated from polydimethylsiloxane by multilayer photolithography and replica molding. We proposed a design algorithm of the microfluidic network for an arbitrary monotonic concentration profile by means of a hydrodynamic calculation. Because of the high fluidic-resistance ratio of the fluidic-resistance microchannels to the diffusion-mixing microchannels, appropriate geometry and dimensions of the fluidic-resistance microchannels allowed us to obtain desired concentration profiles. The fabricated microfluidic network was compact, occupying a 8 x 18 to 21.0 x 13.5 mm(2) area on the microchip. Both the linear and the logarithmic concentration profiles were successfully generated with the error less than 15% for the linear concentration profile, 22% and 35% for the logarithmic concentration profiles of 3 and 6 orders of magnitude, respectively. The generated linear concentration profiles of the small molecule, calcein, were independent of the flow rate within the range of 0.009 to 0.23 microL/min. The concentration profiles of the large molecules, dextrans, depended on the flow rate and molecular weight. The required residence time of large molecules in the diffusion-mixing microchannel was correlated with dimensionless diffusion time, Fick number, and was discussed based on the scaling law. These compact, stable serial dilution microfluidic networks are expected to be applied to various integrated on-chip analyses.

Cell micropatterning, a method to place cells at arbitrary regions, is becoming an essential tool to conduct cell biology and tissue engineering. Conventional cell patterning techniques usually allow only single patterning with single cell type on the same culture surface. However, biomedical research today requires even sophisticated fabrication methods that require spatiotemporal control of multiple cell arrangements. Here we introduce in situ cell micropatterning system which enables stepwise cell patterning using a photoresponsive cell culture surface (PRCS) whose cell adhesiveness could be altered by the UV irradiation. To demonstrate an application to tissue engineering, a liver-mimic tissue array was fabricated and liver-specific gene expressions were quantified with real time PCR. Patterned co-culture systems composed of HepG2 spheroids with Balb/3T3 were fabricated, and the optimum spheroid diameter, which yielded the highest cellular functions, was determined to be 150 microm. After 20 days of patterned co-culture of HepG2 spheroids and Balb/3T3, CYP3A4 expression increased 50-fold higher than conventionally cultured HepG2; CYP3A4 expression was 20% higher than randomly co-cultured HepG2 and Balb/3T3. Thus the combination of PRCS and the photomask-free irradiation apparatus showed the versatility of experimental setups and proved to be a powerful tool for biomedical studies.

Novel on-chip fluid control strategies, on-demand formation of arbitrary microchannels and parallel control of multiple microvalves were successfully demonstrated by means of computer-controlled micropatterned light irradiation of a photoresponsive hydrogel sheet.

Taking advantage of the phenomenon that animal cells adhering to a culture substrate are temporarily immobilized by light irradiation, we established a technique to manipulate the cells adhering to a culture substrate under microscopic observation. Using this technique, we demonstrated a separation of cells adhering to a culture substrate and fabrication of an elaborately patterned co-culture system.

This article reports a pressure-driven perfusion culture chip developed for parallel drug cytotoxicity assay. The device is composed of an 8 x 5 array of cell culture microchambers with independent perfusion microchannels. It is equipped with a simple interface for convenient access by a micropipette and connection to an external pressure source, which enables easy operation without special training. The unique microchamber structure was carefully designed with consideration of hydrodynamic parameters and was fabricated out of a polydimethylsiloxane by using multilayer photolithography and replica molding. The microchamber structure enables uniform cell loading and perfusion culture without cross-contamination between neighboring microchambers. A parallel cytotoxicity assay was successfully carried out in the 8 x 5 microchamber array to analyze the cytotoxic effects of seven anticancer drugs. The pressure-driven perfusion culture chip, with its simple interface and well-designed microfluidic network, will likely become an advantageous platform for future high-throughput drug screening by microchip.

A photoresponsive culture surface (PRCS) allowing photocontrol of cell adhesion was prepared with a novel polymer material composed of poly(N-isopropylacrylamide) having spiropyran chromophores as side chains. Cell adhesion of the surface was drastically enhanced by the irradiation with ultraviolet (UV) light (wavelength: 365 nm); after subsequent cooling and washing on ice, many cells remained in the irradiated region, whereas most cells were removed from the nonirradiated region. The cell adhesion of the PRCS, which had been enhanced by previous UV irradiation, was reset by the visible light irradiation (wavelength 400-440 nm) and the annealing at 37 degrees C for 2 h. Also it was confirmed that the regional control of cell adhesion was induced several times by repeating the same series of operations. Further, living cell patterning with the 200 microm line width was produced readily by projecting UV light along a micropattern on the PRCS on which the living cells had been seeded uniformly in advance. By using a fluorescent probe that stains living cells only, it was confirmed that the cells maintained sufficient viability even after UV light irradiation followed by cooling and washing.

We have developed a membrane oxygenator using a novel asymmetric polyimide hollow fiber. The hollow fibers are prepared using a dry/wet phase-inversion process. The gas transfer rates of O(2) and CO(2) through the hollow fibers are investigated in gas-gas and gas-liquid systems. The polyimide hollow fiber has an asymmetric structure characterized by the presence of macrovoids, and the outer diameter of the hollow fiber is 330 microm. It is found that the polyimide hollow-fiber oxygenator can enhance the gas transfer rates of O(2) and CO(2), and that the hollow fiber provides excellent blood compatibility in vitro and in vivo.

We developed a novel selective cell-separation method based on using a poly(N-isopropylacrylamide)-graft-polypropylene (PNIPAAm-g-PP) membrane containing adsorbed monoclonal antibody specific to the target cell. This membrane was prepared by plasma-induced polymerization and soaking in an antibody solution at 37 degrees C. Poly(N-isopropylacrylamide) has a thermoresponsive phase transition: at 32 degrees C water-insoluble (hydrophobic) and water-soluble (hydrophilic) states interconvert. Adsorption of antibody onto PNIPAAm-g-PP membrane at 37 degrees C and its desorption at 4 degrees C was verified by fluorescence-microscopy of the PNIPAAm-g-PP membrane after soaking it in fluorescein-conjugated goat anti-mouse IgG in phosphate-buffered saline. PNIPAAm-g-PP membranes containing adsorbed anti-mouse CD80 monoclonal antibody preferentially captured mouse-CD80 transfected cells at 37 degrees C compared with membranes lacking antibody or containing anti-mouse CD86 monoclonal antibody. Detachment of captured cells from PNIPAAm-g-PP membranes was facilitated by washing at 4 degrees C because of the thermoresponsive phase transition of PNIPAAm. With this method, mouse CD80- or mouse CD86-transfected cells were enriched from a 1:1 cell suspension to 72% or 66%, simply and with high yield.

Suitable evaluation systems are critical for ranking various biomaterials in order to develop a method to design and synthesize nonthrombogenic biomaterials. We have recently developed an in vitro test system to evaluate platelet/biomaterial interactions in whole blood. The system consists of a parallel plate flow cell and epifluorescent video microscopy (EVM). A glass coverslip coated with a polymer was incorporated into the flow cell, and blood was perfused using a syringe pump via a polymer–coated PVC tubing connected to the flow cell. Whole human blood was anticoagulated with heparin (2 U/ml), and the platelets were labeled with the fluorescent dye mepacrine (5 μM). This system permitted real–time and dynamic observations of platelet/biomaterial interactions in whole blood under a defined flow condition. In order to evaluate the feasibility of this system, two different segmented polyether–polyurethanes (SPEUs), PU–PTMG(650) and PU–PTMG(2000), were chosen as test polymers. Surface characteristics verified with electron spectroscopy for chemical analysis (ESCA) and contact angle measurements showed similar results in both SPEUs. Blood was perfused at a wall shear rate of 200 s–1 for 20 min. Excitation light was applied for 2 s at 1 min intervals. The real–time image was then analyzed at each time point for the percentage of surface area of platelet coverage. Plasma β–thromboglobulin (β–TG) levels were also measured before and after each run. PU–PTMG(650) showed a significantly higher number of adhered platelets than PU–PTMG(2000) at each time point. β–TG levels of PU–PTMG(650) were also higher than those of PU–PTMG(2000), which is comparable to the results of EVM. Thus, this EVM system has been proven to be an excellent and highly sensitive in vitro analytical method for evaluating platelet/biomaterial interactions.

To clarify ion transport, dialysis membranes are evaluated in terms of zeta potential calculated by the Helmholtz-Smoluchowski equation from data on streaming potential delta E and pressure drop delta P, depending upon the operating conditions at which the values are measured. The objective of the current study is to design an improved method for measurement of delta E and delta P of hollow fiber dialysis membranes and to clarify the diffusive permeability of hydrogen phosphate ion. A polytetrafluoroethylene cylindrical cell with an inside diameter of 14 mm and a height of 10 mm was packed with 2,000-3,000 pieces of hollow fibers, and glass filters were set on either side of the cell. Deaerated water purified by ion exchange and reverse osmosis with an electric conductivity of approximately 150 microS/m was caused to flow in the hollows at 293 K to determine delta E and delta P. A good linear relationship between delta E and delta P and the reproducibility of the data was obtained and is shown in Figures 5 and 6, demonstrating the utility of the improved method to measure delta E and delta P, and the validity of the Helmholtz-Smoluchowski equation to calculate zeta potential from data on delta E and delta P. Hydrogen phosphate ion permeability increased with zeta potential for the membranes at about the same rate as pure water permeability. This indicates that hydrogen phosphate ion permeability depends upon the charge and internal structure of dialysis membranes.

The authors have synthesized a novel fluorinated polyimide to develop a membrane material for oxygenators and fabricated polyimide hollow fibers for use in an intravascular oxygenator. A dry/wet phase inversion process has been applied to a spinning process to prepare an asymmetric polyimide hollow fiber. The outer surface of the hollow fiber consists of an ultrathin, dense skin layer, with a calculated apparent thickness of approximately 60 nm. The fiber diameter was 800 microns with a wall thickness of 130 microns. The asymmetric hollow fiber has two advantages because (a) the hollow fiber does not produce plasma leakage due to the dense skin layer of the surface and (b) O2 and CO2 transfer rates through the hollow fiber are enhanced due to the ultrathin skin layer and are significantly larger than those of presently available membrane oxygenators. The blood compatibility of the polyimide hollow fiber without heparinization has been evaluated in vitro. Deformation and aggregation of platelets adherent to the fibers were not observed, and the polyimide suppressed platelet activation. The polyimide significantly reduced the production of anaphylatoxin and also suppressed complement activation.