Search

The current study focuses on the synthesizing of novel hybrid nanosystems of bio‐hydroxyapatite (BioHAp)/synthetic‐hydroxyapatite (HAp‐Syn). Bio‐HAp was defatted, deproteinized, and then sonicated to obtain nanoparticles (nBioHAp). Hybrid nanosystems (HNS) were synthesized by wet chemical precipitation using nBioHAp as nucleation sites and applying four different precipitation times of 45, 90, 135, and 180 min. X‐ray diffraction (XRD) showed that the patterns of the nBioHAp and HAp‐Syn samples have broadened diffraction peaks due to simultaneous elastic and inelastic scattering. Their crystallite size is about 25 nm, while the hybrid nanosystems have a size between 35 and 40 nm. Fourier‐transform infrared spectroscopy (FT‐IR) revealed the main groups associated with hydroxyapatite (PO32−, OH−, and CO32−), and the nanometer character of the crystals was demonstrated by studying the full width at half maximum (FWHM) of the spectra. Scanning electron microscopy (SEM) revealed the differences between the morphologies of nBioHAp and HAp‐Syn. The shape of HNS resembled that of biogenic HAp, which was confirmed by transmission electron microscopy (TEM). Inductively coupled plasma spectroscopy (ICP‐OES) and energy dispersive X‐ray spectroscopy (EDS) were used to confirm the elemental composition of Mg, Na, K, and Zn as minority ions. [ABSTRACT FROM AUTHOR]

This study focuses on enhancing the surface properties of surgical titanium alloys (Ti–6Al–4V) to optimize their suitability for biomedical implant applications. Direct laser writing (DLW) was used to modify the titanium surface and facilitate the deposition of biohydroxyapatite (BHA) particles through wet deposition and the coalescence phenomenon. Four types of etching patterns were tested, resulting in biomimetic bone-like surfaces with microtextured features, exhibiting suitable hydrophilic characteristics for biomedical implants. The resulting surfaces were characterized structurally, morphologically, chemically, and in terms of wettability. X-ray diffraction was performed to validate the titanium alloy composition and determine the crystallite size of BHA particles, both before and after thermal treatment. Optical and electron microscopy results demonstrated that the etching pattern density directly impacts the distribution and anchoring of BHA particles, with denser patterns leading to better particle fixation. Dense etching patterns were found to reduce the wettability of Ti surfaces. However, after coating with BHA particles, the contact angle decreased, resulting in more wettable surfaces. Energy-dispersive X-ray spectroscopy (EDS) mapping revealed variations in elemental distribution across different samples, providing an elemental composition analysis that supports the findings from optical and electron microscopy. The effectiveness of BHA deposition is closely tied to the density and pattern of the surface texturization. Overall, this study presents a straightforward yet effective methodology to optimize the surface properties of titanium alloys, potentially enhancing their compatibility with biological tissues. • BHA particles were successfully deposited on the modified Ti–6Al–4V surface using wet deposition. • Laser writing modifies titanium surfaces enhancing BHA anchoring via coalescence. • A biomimetic bone-like surface was achieved on the titanium alloy. • Microtextured surfaces with suitable hydrophilic characteristics for biomedical implants were achieved. [ABSTRACT FROM AUTHOR]