Search

An automated flow-through multi-mycotoxin immunoassay using the stand-alone Munich Chip Reader 3 platform and reusable biochips was developed and evaluated. This technology combines a unique microarray, prepared by covalent immobilization of target analytes or derivatives on diamino-poly(ethylene glycol) functionalized glass slides, with a dedicated chemiluminescence readout by a CCD camera. In a first stage, we aimed for the parallel detection of aflatoxins, ochratoxin A, deoxynivalenol, and fumonisins in cereal samples in a competitive indirect immunoassay format. The method combines sample extraction with methanol/water (80:20, v/v), extract filtration and dilution, and immunodetection using horseradish peroxidase-labeled anti-mouse IgG antibodies. The total analysis time, including extraction, extract dilution, measurement, and surface regeneration, was 19 min. The prepared microarray chip was reusable for at least 50 times. Oat extract revealed itself as a representative sample matrix for preparation of mycotoxin standards and determination of different types of cereals such as oat, wheat, rye, and maize polenta at relevant concentrations according to the European Commission regulation. The recovery rates of fortified samples in different matrices, with 55–80 and 58–79 %, were lower for the better water-soluble fumonisin B1 and deoxynivalenol and with 127–132 and 82–120 % higher for the more unpolar aflatoxins and ochratoxin A, respectively. Finally, the results of wheat samples which were naturally contaminated with deoxynivalenol were critically compared in an interlaboratory comparison with data obtained from microtiter plate ELISA, aokinmycontrol® method, and liquid chromatography–mass spectrometry and found to be in good agreement.

Due to its highly carcinogenic and mutagenic effect on humans, a maximum tolerable limit of 10 ng/L of benzo[a]pyrene (B[a]P) in drinking water was set by the European Commission (Council Directive 98/83/EC). Although several polyclonal and monoclonal antibodies (mAb) for the detection of B[a]P and other polycyclic aromatic hydrocarbons (PAH) have been developed by others, a traditional enzyme-linked immunosorbent assay (ELISA) with a limit of quantification of 10 ng/L for monitoring B[a]P has not been developed. With this in mind, several single-chain variable fragment (scFv) antibodies were created using existing mAbs against the extremely hydrophobic hapten B[a]P, and their heavy and light chains recombined to make unique variable light (V(L)) and heavy (V(H)) chain combinations. Their binding behaviour was investigated using microtiter plate ELISA and surface plasmon resonance techniques. Specifically, the coding sequences for V(L) and V(H) chains of 10 murine anti-B[a]P antibody producing hybridoma cell lines were isolated by degenerate oligonucleotide primer sets, cloned in phagemid pIT2 and transferred into Escherichia coli HB2151. To systematically investigate the interaction of the V(L) and V(H) domains, three high-affinity B[a]P-specific and one nonspecific clone were selected and recombined to build a set of 16 different V(L) and V(H) combinations. On the basis of our data, it was shown that the V(H) plays the major role for specific binding of B[a]P, whilst the V(L) can, in some cases, increase the final sensitivity of the assay by one order of magnitude. Furthermore, the sequence analysis of scFvs indicates that the complementarity determining region H3 plays a major role in affinity, whilst cross-reactivity to seven other PAHs demonstrates the importance of the V(L) in providing cross-reactivity.

Ochratoxin A (OTA) can contaminate foodstuffs in the ppb to ppm range and once formed, it is difficult to remove. Because of its toxicity and potential risks to human health, the need exists for rapid, efficient detection methods that comply with legal maximum residual limits. In this work we have synthesized an OTA conjugate functionalized with a water-soluble peptide for covalent immobilization on a glass biochip by means of contact spotting. The chip was used for OTA determination with an indirect competitive immunoassay format with flow-through reagent addition and chemiluminescence detection, carried out with the stand-alone automated Munich Chip Reader 3 (MCR 3) platform. A buffer model and real green coffee extracts were used for this purpose. At the present, covalent conjugate immobilization allowed for at least 20 assay-regeneration cycles of the biochip surface. The total analysis time for a single sample, including measurement and surface regeneration, was 12 min and the LOQ of OTA in green coffee extract was 0.3 μg L−1 which corresponds to 7 μg kg−1.

Pathogen detection is important for health and safety reasons. Several outbreaks all over the world have shown the need for rapid, qualitative, quantitative, and, particularly, multianalyte detection systems. Hence, a multichannel flow-through chemiluminescence microarray chip for parallel detection of pathogenic bacteria was developed. The disposable chip made of acrylonitrile-butadiene-styrene (ABS) copolymer was devised as a support for a multiplexed sandwich immunoassay. Calibration and measurement was possible in one experiment, because the developed chip contains six parallel flow-through microchannels. Polyclonal antibodies against the pathogenic bacteria Escherichia coli O157:H7, Salmonella typhimurium, and Legionella pneumophila were immobilized on the chip by microcontact printing in order to use them as specific receptors. Detection of the captured bacteria was carried out by use of specific detection antibodies labelled with biotin and horseradish peroxidase (HRP)-streptavidine conjugates. The enzyme HRP generates chemiluminescence after adding luminol and hydrogen peroxide. This signal was observed by use of a sensitive CCD camera. The limits of detection are 1.8 x 10(4) cells mL(-1) for E. coli O157:H7, 7.9 x 10(4) cells mL(-1) for L. pneumophila, and 2.0 x 10(7) cells mL(-1) for S. typhimurium. The overall assay time for measurement and calibration is 18 min, enabling very fast analysis.