Search

Carbon black nanomaterial (CB-NM), as an industrial product with a large number of applications, poses a high risk of exposure, and its impact on health needs to be assessed. The most common testing platform for engineered (E)NMs is in vitro toxicity assessment, which requires prior ENM dispersion, stabilization, and characterization in cell culture media. Here, asymmetric flow field-flow fractionation (AF4) coupled to UV–Vis and dynamic light scattering (DLS) detectors in series was used for the study of CB dispersions in cell culture media, optimizing instrumental variables and working conditions. It was possible to disperse CB in a non-ionic surfactant aqueous solution due to the steric effect provided by surfactant molecules attached on the CB surface which prevented agglomeration. The protection provided by the surfactant or by culture media alone was insufficient to ensure good dispersion stability needed for carrying out in vitro toxicity studies. On the other hand, cell culture media in combination with the surfactant improved dispersion stability considerably, enabling the generation of shorter particles and a more favourable zeta potential magnitude, leading to greater stability due to electrostatic repulsion. It was demonstrated that the presence of amino acids in the culture media improved the monodisperse nature and stability of the CB dispersions, and resulted in a turn towards more negative zeta potential values when the pH was above the amino acid isoelectric point (IEP). Culture media used in real cell culture scenarios were also tested, and in vitro toxicity assays were developed optimizing the compatible amount of surfactant. Graphical abstract

With the explosive growth of the dietary supplements industry, new demands have emerged that cannot be faced with the sophisticated instrumentation available in well-equipped laboratories. In particular, there is a demand for simplified and easy-to-use instruments, capable of providing results in short times of analysis. In this study, a hand-portable miniaturized liquid chromatograph (portable LC) has been tested for the determination of chlorogenic acids (CGAs) in products intended to supplement the diet and elaborated with green coffee extracts. CGAs offer several health benefits due to their antioxidant properties, and an increasing number of dietary supplements are marketed with claimed high contents of these compounds. The results obtained with the proposed portable LC approach have been compared with those obtained with two other miniaturized benchtop liquid chromatography instruments, namely, a capillary liquid chromatograph (capLC) and a nano liquid chromatograph (nanoLC). Although compared with the methods that used the benchtop instruments, the sensitivity attainable was lower, the portable LC instrument provided a comparable analytical performance for the quantification of the main GCAs at low mg g−1 levels, and it was clearly superior in terms of speed. The proposed portable LC-based method can be applied to assess the content and distribution profile of the predominant CGAs in this kind of dietary supplement. It can be also used to estimate the antioxidant power due to CGAs, as well as their preservation state.

In the present work, the footprint of carbonyl compounds in hand scent was achieved by a miniaturized method consisting of sampling with cotton gauze, extraction and derivatization using 2,4-dinitrophenylhydrazine (DNPH) and preconcentration, separation and detection by in-tube solid-phase microextraction (IT-SPME) coupled to nano-liquid chromatography/Uv–vis diode array detection. The coupling IT-SPME-nanoLC-DAD was solved by using a two-valve system: the first valve for loading the sample and the second one to perform IT-SPME. To this aim, a nanoparticle-based capillary column was employed. Firstly, the transfer time from the load loop to the NP-based capillary column in the IT-SPME system was optimized. Additionally, the conditioning and clean-up steps were also studied. For the chromatographic separation of DNPH derivatives, gradient elution mode (acetonitrile/water) and a C18 nanocolumn were employed. The detection limits achieved were between 0.5 and 1.5 μg/L and % rsd was lower than 5% for quantification limits. The proposed methodology gave rise to different chromatographic profiles of carbonyl compounds in the hand scent of several volunteers. These profiles were obtained by estimating the relative peak area of selected carbonyls in hand scent. Nonanal, decanal and dodecanal and other low polarity carbonyl compounds (unknown hydrazones) were detected in the odor profiles.

Colorimetric localized surface plasmon resonance (LSPR) as analytical response is applied for a wide number of chemical sensors and biosensors. However, the dependence of different factors, such as size distribution of nanoparticles (NPs), shape, dielectric environment, inter-particle distance and matrix, among others, can provide non-reliable results by UV–vis spectrometry in complex matrices if NP assessment is not carried out, particularly at low levels of analyte concentrations. Miniaturized liquid chromatography, capillary (CapLC) and nano (NanoLC), coupled on line with in-tube solid phase microextraction (IT-SPME) is proposed for the first time for both, controlling suitability of used noble metal NP dispersions and developing plasmonic assays. Several capped noble NPs and target analytes were tested from variations in the chromatographic profiles obtained by using diode array detection. The IT-SPME step, which influenced the chromatographic fingerprint provided by noble NP dispersions, was studied by asymmetrical flow field flow fractionation (AF4) too. We monitored NP aggregation induced by interaction with several analytes like acids and spermine (SPN). Assessment of NPs was achieved in less than 10 min and it permitted to develop suitable plasmonic tests. Here, it was also demonstrated that these assays can be followed by IT-SPME-miniaturized LC-DAD and more sensitivity and selectivity than those provided by UV–Vis spectrometry were achieved. Analysing urine samples to determine SPN as a cancer biomarker as a proof of concept is presented.

This paper reports the fabrication and utility of a new solid sensor, which allows the quantitation of silver ions acting as catalyst at the low micromolar level. The optical sensor was prepared by incorporating both reagents, pyrogallol red (PGR) and 1,10-phenanthroline (Phen), in a nylon membrane. The effect of parameters in determining silver-catalyzed oxidation of PGR by persulfate in the presence of Phen as an activator was studied and optimized for achieving suitable sensitivity. Semiquantitative analysis can be performed by visual inspection of the color of the sensor by comparing it with standard responses and quantitative analysis can be carried out by its diffuse reflectance (DR) measurement or by a digital image-processing tool (GIMP) using a smartphone. The sensor exhibited a linear relationship toward Ag(I) concentrations ranging from 0.4 to 10 μM or 1-25 μM and limits of detection of 0.1 μM or 0.3 μM for incubation times of 50 and 30 min, respectively. The relative standard deviation achieved for several batches of sensors was around 2%. The analysis of water samples from tap and refrigerating circuits containing solid biocides, which leach silver ions, prove that this portable and sustainable sensor is successfully operational in real situations. Graphical abstract.

An in place colorimetric method has been proposed for estimation of the quantity of lactose in several matrix (milk, water effluents and surfaces). Analyzing the amount of this carbohydrate it can be control the product, the cleanliness of the parts of the dairy companies and it can avoid contamination of milk products produced there. This method combines the use of HPTLC for sugars separation with novel analytical devices as minispectrophotometer with fiber optic coupled to a smartphone. In order to measure the lactose a colorimetric reaction has been used. Variable volumes of samples or stock solutions were deposited in nano-silica gel layer, a mobile phase of acetonitrile:water:acetic acid was used for carbohydrate separation and a solution of thymol (0.05g Thymol in 95mL of EtOH and 5mL H2SO4) was used for revealed the carbohydrate spot. Finally, the reflectance of samples and stock solutions were measured. The achieved limits of detection were 0.03 mg•mL−1 and 0.003 mg•mL−1 for the working concentration range and the analysis at traces level respectively.

A new calibration methodology based on the combination of integrated calibration method (ICM) and the H-point standard addition method (HPSAM) is presented. It allows the diagnosis and correction o...

We report the ability of a chiral Cu(II) 3D MOF based on the tripeptide Gly-L-His-Gly (GHG) for the enantioselective separation of metamphetamine and ephedrine. Monte Carlo simulations suggest that chiral recognition is linked to preferential binding of one of the enantiomers as result of either stronger or additional H-bonds with the framework that lead to energetically more stable diastereomeric adducts. Solid phase extraction (SPE) of a racemic mixture by using Cu(GHG) as extractive phase permits isolating more than 50% of the (+)-ephedrine enantiomer as target compound in only four minutes. To the best of our knowledge, this represents the first example of a MOF capable of separating chiral polar drugs.

The utility of matrix solid phase dispersion (MSPD) for the direct analysis of amphetamines in hair samples has been evaluated, using liquid chromatography (LC) with fluorescence detection and precolumn derivatization. The proposed approach is based on the employment of MSPD for matrix disruption and clean-up, followed by the derivatization of the analytes onto the dispersant-sample blend. The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) has been used for derivatization. Different conditions for MSPD, analyte purification and solid phase derivatization have been tested, using amphetamine (AMP), methamphetamine (MET), ephedrine (EPE) and 3,4-methylenedioxymethamphetamine (MDMA) as model compounds. The results have been compared with those achieved by using ultrasound-assisted alkaline digestion and by MSPD combined with conventional solution derivatization. On the basis of the results obtained, a methodology is proposed for the analysis of amphetamines in hair which integrates sample disruption, clean-up and derivatization using a C18 phase. Improved sensitivity is achieved with respect to that obtained by the alkaline digestion or by the MSPD followed by solution derivatization methods. The method can be used for the quantification of the tested amphetamines within the 2.0-20.0ng/mg concentration interval, with limits of detection (LODs) of 0.25-0.75ng/mg. The methodology is very simple and rapid (the preparation of the sample takes less than 15min).

Following the present trends in miniaturization, a methodology that combines on-line In-Tube Solid-Phase Microextraction (IT-SPME) with Liquid Nanochromatography (nano-LC) and UV-vis diode array detection (DAD) was developed. This coupling was achieved by using two interconnected valves (i.e. conventional and micro-automatic valves) in the system of injection. As for IT-SPME, different materials, containing in some cases nanostructures or nanoparticles and in other cases polymeric adsorbent phases immobilized on capillary columns, were tested in order to improve extraction efficiencies of organic compounds; diclofenac was selected as the target analyte. Additionally, the transfer time of the sample between the two injection valves, as well as the lengths and the internal diameters of the capillary columns, was optimized. Under the selected conditions, the resulting IT-SPME-nano-LC-DAD method showed great potential to become a powerful analytical tool as it was successfully applied to the determination of diclofenac in pharmaceutical and water samples. For comparison purposes, IT-SPME coupled to Capillary Liquid Chromatography (Cap-LC) was used. The extraction yield of diclofenac reached near 80%, a high value for techniques that involve IT-SPME. Good accuracy (recoveries near 100%) and precision (4% RSD) were obtained.

A method for quantifying benzalkonium chloride (BAK), an alkyl dimethyl benzyl ammonium compound, in several biocides formulations is proposed. A tertiary amine like N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine (TA) and a straight-chain alkyl ammonium compound like trimethyl-tetradecyl ammonium chloride (TMTDAC), have been employed as trade surfactants besides BAK. Two capillary analytical columns with different polarities are tested: inertsil CN-3 capillary column (150mm×0.5mm i.d., 3μm particle diameter) and a non endcapped Zorbax C18 capillary column (35mm×0.5mm i.d., 5μm particle diameter). This latter column provided the best separation of the BAK homologues in less than 12min using acetonitrile:acetate buffer (50mM, pH 5) 85:15 at 20μLmin(-1). The proposed method combines on-line in-tube solid-phase microextraction (IT-SPME) coupled to capillary liquid chromatography (CapLC) and UV diode array detection. Matrix effect was present when TA were in excess to BAK. If TMTDAC is the co-biocide, matrix effect is always present. A decreasing of analytical response mainly for C12-BAK homologue was found using both chromatographic columns. The charged amount of mixture in the system was the most important parameter for obtaining reliable results. 1mL was the on line processed sample volume optimum for concentrations lower than 35μgmL(-1) of total surfactants. LODs were 0.03μgmL(-1) and 0.006μgmL(-1) for C12-BAK and C14-BAK, respectively. This method is also of use to evaluate the unwanted presence of BAK in biocide formulations due to industrial processes.

Polymers obtained from tetraethyl orthosilicate (TEOS) and triethoxymethylsilane (MTEOS) have been functionalized with different metal and metal oxide nanoparticles (NPs), and used as coatings of extractive capillaries for the extraction of polar compounds by in-tube solid-phase microextraction (IT-SPME) coupled on-line to nano-liquid chromatography (nano-LC). The extraction capabilities of the new phases have been studied using several triazinic herbicides with log of octanol/water partition coefficients (Kow) ranging from -0.7 to 3.21 under reversed phase chromatographic conditions. Best extraction efficiencies for the most polar compounds (log Kow ≤ 2.3) were typically obtained with the CuO NPs doped phase. The TEOS-MTEOS polymer can be modified with two types of NPs in order to obtain extractive phases capable of interacting with compounds of a wide range of polarities; alternatively, two capillaries each with a different type of NPs can be combined in series with the same goal. Under the later approach the limits of detection (LODs) found for the tested herbicides were 0.02–1.5 µg/L, and the precision expressed as relative standard deviation (RSD) varied from 2 to 10% (n = 3). The recoveries found in sea water samples ranged from 80 to 107%. In addition, the developed CuO NPs doped phase can be used in hydrophilic interaction chromatography (HILIC), which is the separation mode recommended for highly polar compounds. This has been illustrated using the amino acids tyrosine (log Kow = -2.26) and tryptophan (log Kow = -1.06) as model compounds, being their respective LOD 0.1 and 0.3 µg/mL. Examples of application of the developed bimodal extractive phase to different environmental and waste waters are given in order to show its utility and versatility.

The Marquis test is the most frequently used spot color assay for the screening of unknown drugs such as amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-metilenedioxymethamphetamine, and morphine. However, this test involves the use of the toxic reagent formaldehyde, as well as the manipulation of concentrated sulfuric acid. Here, we report a new format of this test that improves the sustainability and safety for the operator by immobilizing formaldehyde into a polydimetylsiloxane composite. In contact with a solution (or suspension) of the suspected sample in sulfuric acid, the dispositive delivers formaldehyde and the reaction takes place in a few seconds. Under the proposed conditions, only small amounts of the drug (μg) are necessary to produce intense changes of color. In addition, the percentage of the drug in the sample can be established by obtaining pictures of the test vials and subsequent analysis of the digitalized images. The responses were linear for amphetamine-like drugs up to a concentration of 100 mg L−1, and the precision achieved was adequate (relative standard deviations, RSDs

This tutorial aims at providing guidelines for analyzing metallic nanoparticles (NPs) and their dispersions by using methods based on miniaturized liquid chromatography with diode array detection (MinLC-DAD) and coupled on-line to in-tube solid-phase microextraction (IT-SPME). Some practical advice and considerations are given for obtaining reliable results. In addition, this work outlines the potential applications that set these methodologies apart from microscopy-related techniques, dynamic light scattering, single particle ICP-MS, capillary electrophoresis, field-flow fractionation and other chromatographic configurations, which are discussed and mainly seek to accomplish size estimation and NP separation, speciation analysis and quantification of mainly AgNPs and AuNPs. MinLC-DAD has the potential to estimate the NP concentration and from it the average size of unknown samples by calibrating with a single standard, as well as studying potentially non-spherical particles and stability-related properties of their dispersions. While keeping the signal dependency with concentration and increasing the method sensitivity, IT-SPME-MinLC-DAD goes further allowing for the assessment of the dispersant effect and ultimately changes in the nanoparticle surroundings that range from modifications of the hydrodynamic diameter to the exposure to different reagents and matrices. The methodology can still be improved by either exploring newer IT-SPME adsorbents or by assaying new system configurations. Taking into account that this technique gives complementary information in relation to other techniques discussed here, this tutorial serves as a guide for analyzing metallic NPs towards a better understanding of the particle behavior under different scenarios.

Due to the difficulties of working with chloramines, a critical examination of monochloramine standard preparation has been performed in order to select the best synthesis conditions. The analyte has been determined by in-tube solid phase extraction coupled to capillary liquid chromatography with UV detection (IT-SPME Capillary LC DAD). Potential factors affecting the response of monochloramine such as the pH of mobile phase and the volume of sample processed by IT-SPME Capillary LC DAD have been investigated and optimized. According to the results of the study, 0.1 mL or 4.0 mL of sample at neutral pH were loaded in the chromatographic system. A sensitive and selective method has been developed for the determination of monochloramine in water. Validation of the method has been performed. The linear range was 0.09-5 mg/L with linear regression coefficients (R 2 ) greater than 0.995. Method reproducibility expressed as relative standard deviation (RSD, %), was lower than 15%. The limits of detection (LODs) were 0.029 and 0.01 mg/L by processing 0.100 mL or 4 mL of the samples, respectively, being below the maximum residues levels allowed for this compound. The sensitivity achieved by the developed method was better than that obtained by the reference method. The developed method was applied to water samples (tap and swimming pool water).

In-tube solid-phase microextraction (IT-SPME) coupled to miniaturized liquid chromatography (LC) techniques are attractive mainly due to the column efficiency improvement, sensitivity enhancement and reduction of solvent consumption. In addition, the nanomaterials based sorbents can play a key role in the improvement of the extraction efficiency taking into account their interesting physical and chemical properties. Thus, in this work the performance of IT-SPME coupled to nano LC (NanoLC) has been compared with the performance of IT-SPME coupled to capillary LC (CapLC) with similar configurations for the determination of polar triazines including their degradation products. In both cases, a DAD detector was used. Different extractive phases such as TRB-5, TRB-5/c-SWNTs, TRB-5/c-MWNTs capillary columns have been tested. The dimensions of the capillary columns were 0.32 mm id × 40 cm length and 0.1 or 0.075 mm i.d. × 15 cm length for the couplings with CapLC and NanoLC, respectively. The processed volume was 4 mL for CapLC and 0.5 mL for NanoLC. The elution was carried out with ACN:H 2 O (30:70, v/v). IT-SPME-NanoLC has shown a higher performance than IT-SPME-CapLC for the target analytes demonstrating the enhancement of the extraction efficiency with the former configuration. A new phase TEOS-MTEOS-SiO 2 NPs has been also proposed for IT-SPME-NanoLC, which improves the retention of polar compounds. Compared with previously published works, improved LODs were achieved (0.025–0.5 μg L −1 ). The practical application of the proposed procedure has been demonstrated for the analysis of water samples and recovered struvite samples from wastewater treatment plants. Therefore, the proposed procedure can be an alternative method for regulatory purposes.

The main di-(2-ethylhexyl) phthalate (DEHP) degradation products, (2-ethylhexyl) phthalate (MEHP), diethyl phthalate (DEP) and dibutyl phthalate (DBP), have been tested. The proposed cost-effective method combines on-line, in-tube solid-phase micro extraction (IT-SPME) in in-valve configuration and capillary liquid chromatography with UV diode array detection (Cap-LC-DAD). Acidification of the samples at pH 3 improved markedly the estimation of MEHP. Aliquots of 4 mL of acidified water samples were directly processed. After sample loading, the analytes were desorbed with the mobile-phase and transferred to the monolithic capillary column. Satisfactory linearity and precision, absence of matrix effect and suitable limits of detection (LODs): 0.005, 0.1, 0.1 and 1.5 μg/L for MEHP, DEP, DEHP and DBP, respectively have been achieved. The main advantages are speed and the reduction of background signal by minimizing sample preparation. Real water samples have been analyzed.

This work demonstrates the application of silica supported Fe3O4 nanoparticles as sorbent phase for magnetic solid-phase extraction (MSPE) and magnetic on-line in-tube solid-phase microextraction (Magnetic-IT-SPME) combined with capillary liquid chromatography-diode array detection (CapLC-DAD) to determine organophosphorous compounds (OPs) at trace level. In MSPE, magnetism is used as separation tool while in Magnetic-IT-SPME, the application of an external magnetic field gave rise to a significant improvement of the adsorption of OPs on the sorbent phase. Extraction efficiency, analysis time, reproducibility and sensitivity have been compared. This work showed that Magnetic-IT-SPME can be extended to OPs with successful results in terms of simplicity, speed, extraction efficiency and limit of detection. Finally, wastewater samples were analysed to determine OPs at nanograms per litre.

A biodegradable material, zein, is proposed as a reagent delivery platform for biokits and biosensors based on alkaline phosphatase (ALP) activity/inhibition in the presence of phosphatase substrates. The immobilization and release of both the substrate and/or the active ALP, in a biodegradable and low-cost material such as zein, a prolamin from maize, and in combination with glycerol as plasticizer have been investigated. Three zein-based devices are proposed for several applications: (1) inorganic phosphorus estimation in water of different sources (river, lake, coastal water and tap water) with a detection limit of 0.2mg/L - compared to at least 1mg/L required by legislation, (2) estimation of ALP in saliva and (3) chlorpyrifos control in commercial preparations. The single-use kits developed are low cost, easy and fast to manufacture and are stable for at least 20 days at -20°C, so the zein film can preserve and deliver both the enzyme and substrates.

A solid sensor obtained by embedding 1,2-naphthoquinone-4-sulfonate (NQS) into polydimethylsiloxane/tetraethylortosilicate/silicon dioxide nanoparticles composite has been developed to identify and determine amphetamine (AMP), methamphetamine (MAMP), 3,4-methylenedioxymetamphetamine (MDMA) and 3,4-methylenedioxyamphetamine (MDA). The analytes are derivatized inside the composite for 10 min to create a colored product which can be then quantified by measuring the diffuse reflectance or the color intensity after processing the digitalized image. Satisfactory limits of detection (0.002–0.005 g mL−1) and relative standard deviations (

This study shows that ultrasonic assisted extraction is a good practise for removing impurities from sorbents used for matrix-solid phase dispersion (MSPD). A previous washing of the sorbent with an organic solvent or mixture of solvents eliminates part of the interferences, but this treatment is not enough for the quantification of PAHs at ng/g levels. It is demonstrated that the determination of traces of polycyclic aromatic hydrocarbons (PAHs) in solid samples processed by matrix-solid phase dispersion (MSPD) may be severely affected by the presence of sorbent impurities. Different extraction solvents and sonication conditions have been tested, and on the basis of the results obtained a new approach is presented for cleaning sorbents typically used in MSPD such C(18), silica or Florisil. The utility of the described approach has been illustrated by analysing by liquid chromatography and fluorescence detection different marine sediments.

In this work, the performance of ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) and capillary liquid chromatography-mass spectrometry (CLC-MS) has been studied for the analysis of eighteen perfluorinated compounds in water samples. UHPLC-MS/MS and CLC-MS analysis were carried out using a Zorbax C-18 column (50 mm × 2.1 mm, 1.8 μm) and a Zorbax SB-C18 column (150 mm × 0.5 mm, 3.5 μm), respectively, in gradient elution mode with a mobile phase of ammonium formate and methanol. Both techniques were compared with conventional LC-MS/MS in terms of speed, sensitivity, selectivity and resolution. Water samples were extracted by solid phase extraction (SPE). Mean absolute recoveries at two concentration levels, 6 and 60 ng L⁻¹, calculated from the eighteen compounds were: 77 ± 12(s) and 82 ± 12(s), respectively. Relative standard deviation (RSD) was lower than 16% for each perfluorinated compound. The results obtained showed that UHPLC-MS/MS and CLC-MS allow the determination of perfluorinated compounds in water samples with satisfactory sensitivity and resolution and reduced analysis time. Therefore, both techniques were employed for the analysis of water samples to determine the target analytes at low concentration levels and with lower analysis times than using HPLC-MS/MS. Similar statistical values were obtained from both techniques at 95% confidence level. Several compounds have been detected, but perfluorooctanoic acid (PFOA) (171 ng L⁻¹ and 148 ng L⁻¹ by UHPLC-MS/MS and CLC-MS, respectively) showed the highest concentration.

The performance of a monolithic C 18 column (150 mm × 0.2 mm i.d.) for multiresidue organic pollutants analysis by in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography has been studied, and the results have been compared with those obtained using a particulate C 18 column (150 mm × 0.5 mm i.d., 5 μm). Chromatographic separation has been carried out under isocratic elution conditions, and for detection and identification of the analytes a UV-diode array detector has been employed. Several compounds of different chemical structure and hydrophobicity have been used as model compounds: simazine, atrazine and terbutylazine (triazines), chlorfenvinphos and chlorpyrifos (organophosphorous), diuron and isoproturon (phenylureas), trifluralin (dinitroaniline) and di(2-ethylhexyl)phthalate. The results obtained revealed that the monolithic column was clearly advantageous in the context of multiresidue organic pollutants analysis for a number of reasons: (i) the selectivity was considerably improved, which is of particular interest for the most polar compounds triazines and phenyl ureas that could not be resolved in the particulate column, (ii) the sensitivity was enhanced, and (iii) the time required for the chromatographic separation was substantially shortened. In this study it is also proved that the mobile-phase flow rates used for separation in the capillary monolithic column are compatible with the in-valve IT-SPME methodology using extractive capillaries of dimensions similar to those used in conventional scale liquid chromatography (LC). On the basis of these results a new method is presented for the assessment of pollutants in waters, which permits the characterization of whole samples (4 mL) in less than 30 min, with limits of detection in the range of 5–50 ng/L.

A fast and direct method based on the use of Capillary Liquid Chromatography (LC) with electrochemical (EC) detection has been described for phenols pollutants in water samples. Concretely, phenol, o-cresol, 2-chlorophenol and bisphenol A have been selected as target analytes. The combination of Capillary LC with EC detection avoided the necessity of preconcentration steps typically used in environmental analysis. The sample injected volume was 2 μL. The achieved detection limits were between 1 and 2 μg/L and the linear dynamic range was up to 50 μg/L for all studied phenols. The precision and uncertainty were satisfactory. The analysis time per sample was 10 min. The proposed procedure has been proved useful for treated waters.

A simple and fast capillary chromatographic method has been developed to identify and quantify organic pollutants at sub-ppb levels in real water samples. The major groups of pesticides (organic halogens, organic phosphorous, and organic nitrogen compounds), some hydrocarbons (polycyclic aromatic hydrocarbons), phthalates and some phenols such as phenol and bisphenol A (endocrine disruptors) were included in this study. The procedure was based on coupling, in-tube solid-phase microextraction (IT-SPME) by using a conventional GC capillary column (95% methyl–5% phenyl substituted backbone, 80 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve to capillary liquid chromatography with diode array detection. A comparative study between the IT-SPME manifold and a column-switching device using a C 18 column (35 mm × 0.5 mm i.d., 5 μm particle size) has been performed. The IT-SPME procedure was optimal, it allows reaching limits of detection (LODs) between 0.008 and 0.2 μg/L. No matrix effect was found and recoveries between 70 and 116% were obtained. The precision of the method was good, and the achieved intra- and inter-day variation coefficients were between 2 and 30%. This procedure has been applied to the screening analysis of 28 compounds in whole waters from several points of the Mediterranean coast (Valencia Community, Spain).

This work has developed a miniaturized method based on matrix solid phase dispersion (MSPD) using C18 as dispersant and acetonitrile–water as eluting solvent for the analysis of legislated organochlorinated pesticides (OCPs) and polybrominated diphenylethers (PBDEs) in biota samples by GC with electron capture (GC-ECD). The method has compared Florisil®-acidic Silica and C18 as dispersant for samples as well as different solvents. Recovery studies showed that the combination of C18–Florisil® was better when using low amount of samples (0.1 g) and with low volumes of acetonitrile–water (2.6 mL). The use of SPME for extracting the analytes from the solvent mixture before the injection resulted in detection limits between 0.3 and 7.0 μg kg−1 (expressed as wet mass). The miniaturized procedure was easier, faster, less time consuming than the conventional procedure and reduces the amounts of sample, dispersant and solvent volume by approximately 10 times. The proposed procedure was applied to analyse several biota samples from different parts of the Comunidad Valenciana.

A 80-cm length commercially available capillary coated with 95% polydimethylsiloxane and 5% polydiphenylsiloxane (TBR-5) was employed to carry out on-line extraction and preconcentration of dibuthyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) in the chromatographic system. The coated capillary was placed between the sample injection loop and the injection needle of an autosampler. Variables affecting the automatic in-tube solid-phase microextraction (SPME) were optimized. A Genesis C(18) (5 cm x 4.6 mm i.d., 4 microm particle size) was employed as analytical column. The achieved limits of detection by use of diode array detection were 1 and 2.5 microg L(-1), respectively. The proposed conditions have been applied to determine those compounds at low ppb levels (< or =250 microg L(-1)) in aqueous samples. No matrix effect was found, and recoveries between 85 and 115% were obtained. The precision of the method was good, and the achieved intra- and inter-day variation coefficients were between 5 and 20%. The analysis time per sample was 20 min and any off-line pre-treatment of the samples was needed. The taken sample volume was 100 microL. Data on the application of the described method to the analysis of different water samples are presented.

The reliability of SPME combined with a chemical reaction for the analysis of short-chain aliphatic amines by liquid chromatography has been investigated. Different options to couple SPME and derivatization have been tested and compared: (i) derivatization of the analytes in solution followed by the extraction of the derivatives, (ii) extraction of the analytes and subsequent derivatization by immersing the SPME fibre onto a solution of the reagent, and (iii) extraction/derivatization of the analytes using fibres previously coated with the reagent. Methylamine (MA), dimethylamine (DMA) and trimethylamine (TMA) have been selected as a model of primary, secondary and tertiary amines, respectively. The analytes have been derivatized with the fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC), and the fibre coating was Carbowax-templated resin (CW-TR). The employment of fibres coated with FMOC to extract and derivatize the analytes was the best option, as compared with the other approaches tested the sensitivity was considerably improved. On the basis of these studies, a new procedure for the determination of MA, DMA and TMA in water is presented. To demonstrate the utility of the proposed conditions data on linearity, accuracy, repeatability and sensitivity are given. Results of the determination of the amines in tap, river and waste water are also presented.

The objective of this paper is to provide information about solid phase extraction (SPE) as an alternative to liquid–liquid extraction of amines from several matrices. Different sorbents ranging from non-polar phases, such as C 18 silica to more polar such as cyanopropylsilica (CN) have been tested for analysis of aliphatic amines as monoamines, diamines and polyamines. Phenylalkylamines such as amphetamine or methamphetamine and heterocyclic amines such as histamine or cephalosporins (which also contain a carboxylic group), have also been studied. The different steps involved in the extraction procedure have been tested (conditioning, retention, pre-concentration, washing and elution) in order to obtain extracts free of interferences and enough sensitivity. C 18 silica (100 mg) was selected as optimal phase with recoveries nearly of 100%. The elution of more polar amines was performed in acidic conditions while less polar amines required organic solvents. Cephalosporin retention was performed in acid condition by using disk cartridges EM C 18, which gave better selectivity. The optimised clean-up procedures have been discussed to the quantification of the corresponding amines in real samples (urine, water and beer). The accuracy and precision were outlined.

A collaborative study applying an enantiomeric liquid chromatographic (LC) method was carried out to determine the content of the enantiomeric impurity R -timolol and other related substances in three different S -timolol maleate samples. Eight laboratories, all located in Europe, participated in the study. The quantitative results obtained were used to estimate the uncertainty on the content of the different impurities. For that purpose, a set-up was adapted from the ISO guidelines 5725-2, which allowed the estimation of the different variances, i.e. the between-laboratories ( s laboratories 2 ), the between-days ( s days 2 ) and the between-replicates ( s replicates 2 ). The variances of repeatability ( s r 2 ) and reproducibility ( s R 2 ) were then calculated using the equations s r 2 = s replicates 2 and s R 2 = s replicates 2 + s days 2 + s laboratories 2 . For the timolol impurities, it was found that the estimated uncertainty seem to be concentration-dependent. Since the LC method which combines the compendial ones for enantiomeric purity and related substances testing was applied to evaluate uncertainty in this collaborative study, it was shown how a laboratory can evaluate the uncertainty of its results when applying the method in the future.

A selective and sensitive method has been developed for liquid chromatographic determination of ammonium in water samples. The analyte is derivatized with Dansyl Chloride prior to injection into HPLC. Optimal solution derivatization conditions have been established. The dansyl derivative is separated with the aid of a chromatographic column and post-column mixed with peroxyoxalate (TCPO) and H 2 O 2 in order to perform chemiluminescence detection. The detection limit achieved is 8 μg/L and linear response from 0.027 to 0.750 mg/L of ammonium was obtained. Ammonium ion was determined within 2.4 min under optimum chromatographic conditions. The method is fast, and near 10 derivatized samples can be measured per hour. No interference of amines has been obtained. Accuracy studies gave % relative error below 9.8%, and precision studies gave %RSD between 2 and 8%. The method can be applied for amine and ammonium screening and quantification of ammonium in different kind of water samples: bottled, tap, lake, fountain, irrigation, waste and sea. Matrix effect was only found in seawater samples. The method was also applied to several samples after applying Kjeldahl treatment in order to obtain values of total Kjeldahl nitrogen.

The proposed procedure is based on the extraction of the indothylmol blue into C 18 solid-phase extraction (SPE) membranes and direct quantification on the membrane surface by diffuse reflectance spectroscopy. The analytical performance of the proposed method has been evaluated for standard solutions of ammonium using reflectance values, R , as well as the Kubelka–Munk function, F ( R ). The results have been compared with those obtained by the conventional method, which uses UV–vis absorption spectroscopy with a sensor-based method. The described methodology provided satisfactory linearity and reproducibility within the ammonium concentration intervals 25–250 μg L −1 and 25–500 μg L −1 when using R and F ( R ), respectively. The limit of detection was around 10 μg L −1 , which is markedly lower than that of the classical procedure and than those provided by Nessler and OPA/thiol fluorimetric methods. For air samples the linear interval expressed as μg of ammonia is 0.24–2.4 or 0.24–4.7 employing R or F ( R ), respectively. The effect of potential interferences such as metals and aliphatic amines has also been evaluated. Finally, the proposed methodology has been adapted to the determination of ammonia in air and water samples. The method can be also used as a detector support for visual estimation.

This work evaluates the utility of solid-phase microextraction (SPME) in the analysis of amphetamines by liquid chromatography (LC) after chemical derivatization of the analytes. Two approaches have been tested and compared, SPME followed by on-fiber derivatization of the extracted amphetamines, and solution derivatization followed by SPME of the derivatives formed. Both methods have been applied to measure amphetamine (AP), methamphetamine (MA), and 3,4-methylenedioxymethamphetamine (MDMA), using the fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) and carbowax-templated resin (CW-TR)-coated fibers. Data on the application of the proposed methods for the analysis of different kind of samples are presented. When analyzing aqueous solutions of the analytes, both approaches gave similar analytical performance, but the sensitivity attainable with the solution derivatization/SPME method was better. The efficiencies observed when processing spiked urine samples by the SPME/on-fiber derivatization approach were very low. This was because the extraction of matrix components into the fiber coating prevented the extraction of the reagent. In contrast, the efficiencies obtained for spiked urine samples by the solution derivatization/SPME approach were similar to those obtained for aqueous samples. Therefore, the later method would be the method of choice for the quantification of amphetamines in urine.

A method for the enantioselective determination of the amphetamine-derived designer drugs 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA) and 3,4-methylenedioxyethylamphetamine (MDE) based on their derivatization with (-)-1-(9-fluorenyl)ethyl chloroformate (FLEC) is described. The proposed procedure entails preconcentration and derivatization of the analytes into C18-packed solid-phase extraction cartridges, chromatographic separation of the diastereomers originated in a C18 column under gradient elution, and UV detection at 265 nm. Compared with the solution derivatization approach the described procedure increased analyte responses by factors of 28–58. The reliability of the method has been tested by analysing plasma and urine samples spiked with the analytes in the 0.015–1.0 μg mL−1 concentration interval. The proposed conditions provided adequate linearity, and coefficients of variation ranging from 5% to 14% in plasma, and from 3% to 12% in urine. The recoveries of the analytes were of 78%–126% and 78%–128% in plasma and urine, respectively. The limits of detection (LODs) obtained for all the analytes were 5 ng mL−1 in both biological matrices.

A method for the determination of methylamine (MA) in aqueous matrices is reported which uses solid-phase microextraction (SPME) for enrichment and derivatization of the analyte, and high performance liquid chromatography (HPLC). The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) has been used for derivatization. The SPME fibres were successively immersed in the samples and in the derivatization solutions to extract MA and FMOC, respectively. After a defined time of reaction, the derivatized analyte was desorbed into the chromatographic system, and chromatographed in a LiChrosphere 100 RP18, 125 mm ×4 mm i.d., 5 μm, column under gradient elution. In order to improve the MA-FMOC peak profile, a precolumn ( 20 mm ×2.1 mm i.d., packed with Hypersil C18 phase, 30 μm) was connected on-line to the analytical column by means of a switching valve. The experimental conditions (including fibre coating, times of adsorption, reaction and desorption, and concentration of reagent) have been optimised, and the results have been compared with those achieved by using a method previously validated for aliphatic amines in which extraction and derivatization were carried into C18 solid-phase extraction (SPE) cartridges. Although less sensitive, the SPME based method allowed the quantification of MA over the range 2.5–10.0 μg/ml with linearity, reproducibility and accuracy comparable to that of the SPE based method, the limit of detection being 0.75 μg/ml. The main advantages of the proposed SPME procedure are: sample handling involved in the extraction and derivatization steps was considerably reduced, it was free organic solvent and non-destructive. Moreover, the proposed conditions allowed the selective determination of MA in the presence of other primary and secondary short-chain aliphatic amines. The utility of the proposed procedure for the quantification of MA in different types of waters is discussed.

Two stopped-flow manifolds have been proposed for individual or simultaneous determination of chromium and cobalt in water samples. Automated procedures based on multicommutation systems have emphasised the differences of their catalytic effect in luminol–hydrogen peroxide chemiluminescence reaction. A more rapid decay of signal was observed for Co for both configurations (flow injection or continuous injection). The influence of chemical and hydrodynamic variables has been studied in order to establish the robustness of method. The analysis rate was lower 1.5 min per replicate. Chemometric tools have been employed for the resolution of their contributions. Partial least squares (PLS) and H-point standard additions method (HPSAM) were used as multivariate calibration models. The percentages of explained variance were 97–99% (two factors). PLS and HPSAM obtained similar results. HPSAM provided a simple calibration model contributing to develop an analyser for chromium and/or cobalt. Standard mixtures, spiked samples and a certified reference material validated the proposed strategy. The applicability has been demonstrated by the determination of Cr and Co concentration in different water samples. The best results have been obtained for continuous injection providing more robust predictions. The achieved detection limit was 0.2 μg/l for both metals.

The chiral reagent (−)-1-(9-fluorenyl)ethyl chloroformate (FLEC) has been evaluated for the enantioselective analysis of amphetamines by liquid chromatography. For separation of the FLEC diastereomers conventional reversed-phase conditions were used. The conditions affording the best enantiomeric resolution and sensitivity were determined for amphetamine, methamphetamine, ephedrine, pseudoephedrine, 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), and 3,4-methylenedioxyethylamphetamine (MDE). All the amphetamines assayed could be separated with resolution factors ranging from 0.91 to 1.92. Although FLEC is typically used as a fluorogenic reagent, it was shown that UV detection is the best option for stereospecific analysis of the methylenedioxylated amphetamine derivatives (MDA, MDMA, and MDE), because different fluorimetric responses were obtained for the corresponding diastereomers. The utility of the proposed conditions for stereoselective analysis of amphetamines in different types of sample is discussed.

The utility of the derivatization reagento-phthaldialdehyde (OPA) in combination with the chiral thiol N-acetyl-L-cysteine (NAC) for the enantioselective analysis of primary amphetamines and structurally related substances has been investigated. The diastereomers obtained have been chromatographed on an achiral, reversed phase C18 column (125 mm×4 mm i.d., 5 μm), and detected fluorimetrically. The influence of parameters affecting the chromatographic separation as well as the derivatization reaction has been optimized, using amphetamine, norephedrine, norepinephrine and 3,4-methylenedioxyamphetamine (MDA) as model compounds. On the basis of the results obtained, possible conditions for the enantiomeric analysis of these substances are described. The selected conditions have been used successfully for the enantioselective quantitation of the compounds tested within 0.5–10.0 μg mL−1 concentration interval (each enantiomer), the limits of detection being 25–50 ng mL−1. Examples of application to biological samples are also given.

A unique dispositive to determine casein which is the most abundant protein in dairy sewages has been proposed. In this sensing technology, the derivatization reagent 1,2-naphtoquininone 4-sulphonate (NQS) is embedded into a polydimethylsiloxane-tetraethylortosilicate-SiO2 nanoparticles composite (PDMS-TEOS-SiO2NPs). When the composite is immersed into the samples, casein is extracted from the solution and derivatized inside the PDMS matrix after 10 min at 100°C. The sensing support changes its color from yellow to orange depending on the casein concentration. Quantitative analysis can be carried out by measuring the absorbance with a reflection probe or by image-processing tool (GIMP). This sensor provides good sensitivity and precision (RSD%12%). The method validation has been done by applying the biocinchoninic acid method (BCA). Moreover, semiquatitative analysis of casein can be performed by visual observation. Taking into account the advantages of small size, rapidity, simplicity, good stability and high compatibility in aqueous solution, this sensor is expected to have potential practical applications for in-situ determination of casein. Finally the method has been applied to analyze effluents from dairy industries.

This paper describes a new method for the determination of polar triazines, including some degradation products, which combines online in-tube solid-phase microextraction (IT-SPME) and capillary liquid chromatography with UV-diode array detection (DAD). Different extractive coatings have been evaluated for IT-SPME, a capillary column with a polydimethylsiloxane (PDMS) coating, and the same coating modified with carboxylated single-wall carbon nanotubes (c-SWCNTs) and carboxylated multiwall carbon nanotubes (c-MWCNTs). On the basis of the results obtained, a new method is presented for the identification and determination of triazines in water samples. A careful selection of the eluent composition provides the required selectivity and sensitivity for the quantification of the target analytes, even those highly polar (log K ow ≤ 2.3). The proposed conditions have been successfully used for the quantitation of the analytes in the 0.25–50.0 μg L−1 range. The limits of detection (LODs) are in the 0.02–0.1 μg L−1 range, and the intraday and interday relative standard deviation (RSD) coefficients are ≤9 and ≤17 %, respectively. The reliability of the described method has been tested by analyzing several real water samples. The proposed method can be considered an environmentally friendly and cost-effective alternative for routine monitoring of triazines and their degradation products in waters.

A simple, fast, and highly selective and sensitive colorimetric assay to detect nanomolar levels of spermine in human urine (healthy donors, cancer patients) is reported. This assay is based on the absence of a competitive organic capping on the gold nanoparticles together with the high affinity of the amine groups of the analyte for the nanoparticle surface.

Multivariate calibration is tested as an alternative to model chromium(III) concentration versus chemiluminescence registers obtained from luminol-hydrogen peroxide reaction. The multivariate calibration approaches included have been: conventional linear methods (principal component regression (PCR) and partial least squares (PLS)), nonlinear methods (nonlinear variants and variants of locally weighted regression) and linear methods combined with variable selection performed in the original or in the transformed data (stepwise multiple linear regression procedure). Both the direct and inverse univariate approaches have been also tested. The use of a double logarithmic transformation previous to the linear regression has been also evaluated. A new double logarithmic transformation previous to the linear regression is proposed in order to avoid the effect of the noise in the calibration model. Pre-processing, optimization and prediction ability of the multivariate calibration models has been studied at nine different experimental conditions including batch and FIA measurements. Box-plots, PCA and cluster analysis have been employed to test the prediction ability of the different models tested. Nonlinear PCR and nonlinear PLS provide the best results. Real samples have been analyzed and compared with the reference method. The results confirm the successful use of the proposed methodology.

Direct standardization (DS) and piecewise direct standardization (PDS) methods are applied to multivariate standardization of chemiluminescence signals using PLS model as the calibration model. The linear concentration interval of the chemiluminescence determination was determined. This interval was located using univariate robust calibration by least median of squares (LMS) method. The linear calibration model was corroborated by conventional least-squares method. The standardization subset and window size were optimized by means of the prediction residual error sum of squares. Several instrumental sources of variability have been studied: the detection cell, instrument, batch versus flow injection (FI) modes, time and their possible combinations. This study shows the calibration transfer can be employed successfully. The proposed strategy was used in the chemiluminescence determination of Cr(III), Cr(VI) and total Cr in water samples by means of a calibration transfer. The obtained results are in agreement with reference method values and known spiked amounts, and are independent of the standardization factors.

Different strategies for the quantification of partially coeluting optical isomers have been investigated. The methods tested are based on the use of different features as the analytical UV signals: peak heights, perpendicular drop areas, first and second derivatives of the chromatograms, peak areas obtained by deconvolution of the overlapped peaks with data fitting optimization, and a multivariate model (principal component regression, PCR). The amphetamine-derivative drug pseudoephedrine was selected as a model compound. For chromatography, LiChrospher 100 RP 18 and a mobile-phase consisting of methanol and a solution of carboxymethyl-β-cyclodextrin (the chiral selector) were used. The UV detector was set at 215 nm. The accuracy obtained with the tested methods at different degrees of overlapping and at different concentration ratios between enantiomers was evaluated. The results of this study demonstrated that the best option for quantification of partially overlapped UV peaks of enantiomers and to obtain the enatiomeric excess is the use of a PCR model using peak heights, perpendicular drop peak areas and deconvoluted peak areas as the original variables. The predictive ability of the proposed calibration model is of about 2–8 times better (depending on the overlapping degree) than that achieved with the other models tested.

β-cyclodextrins (β-CDs) have been evaluated as chiral recognition agents for the enantioseparation of ephedrines by liquid chromatography (LC). The compounds tested were norephedrine, ephedrine, pseudoephedrine, N-methylephedrine and N-methylpseuoephedrine. Two possibilities have been investigated, the employment of a chiral stationary phase consisting of immobilized β-cyclodextrin, and the addition of the chiral selector to the mobile phase. In the latter approach the following chiral agents have been assayed, native β-cyclodextrin (β-CD), methyl-β-cyclodextrin (M-β-CD), carboxyethyl-β-cyclodextrin (CE-β-CD), carboxymethyl-β-cyclodextrin (CM-β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD). The experimental factors affecting the chiral separations have been examined, including the percentage of organic solvent, the ionic strength and pH of the buffer, the type and concentration of chiral selector, and the mobile-phase flow rate. Differences in enantioselectivity displayed by the different methods are discussed.

Bond Elut C18 solid-phase extraction cartridges were used for preconcentration and pre-column derivatization with 3,5-dinitrobenzoyl chloride (DNB) of aliphatic amines in water. Conditions for analyte preconcentration and derivatization (including the volume of sample, concentration of reagent, time of reaction and pH) were investigated, using ethylamine, isopropylamine and dimethylamine as model compounds. On the basis of these studies, a rapid and sensitive method for the determination of aliphatic amines in water is presented. The analytes are retained and purified on the cartridges and then derivatized and desorbed by drawing in succession the DNB solution and acetonitrile. The collected extracts are subsequently chromatographed in a Hypersil ODS C18 column using acetonitrile-water for elution. The DNB derivatives are monitored at 230 nm. The method provides satisfactory reproducibility and linearity within the 0.050-1.0 mg l(-1) concentration interval, the limits of detection being 2-5 microg l(-1). Analyte recoveries were in the 70-102% range, whereas the conversion yields compared with those observed for the solution derivatization were in the 79-107% range. The total analysis time (sample treatment plus chromatography) was about 15 min. The method was applied to the determination of ethylamine, isopropylamine and dimethylamine in tap and river waters.

The potential of different chromatographic systems for automated, on-line analysis of amphetamine in biological fluids is illustrated. The various systems integrate analyte purification and enrichment, separation, derivatization in different derivatization modes witho-phthaldialdehyde (OPA) and N-acetyl-L-cysteine (NAC), and fluorimetric detection. The reliability of the systems has been tested by analysing urine and plasma samples containing amphetamine in the 0.1–20.0 μg mL−1 range. Pre, on and post-column derivatization strategies are compared in terms of their instrumental requirements, selectivity, sensitivity, linearity and reproducibility.

The generalized H-point standard-additions method (GHPSAM) is used in order to obtain the total Cr(VI) and chromate concentration in water samples whose matrices are completely unknown. Moreover, a new methodology, which is a modification of the GHPSAM, is proposed for the simultaneous determination of the two major chemical forms of Cr(VI) present in the sample. The method is based on the location of spectral intervals where the behaviour of the interferent absorbance can be considered as linear. From these intervals, the analyte concentration free from bias error can be estimated. Spiked samples of dig and harbour water measured in the UV–visible spectral region have been tested to check the background signal cancellation.