Search

In the marine environment agar degradation is assured by bacteria that contain large agarolytic systems with enzymes acting in various endo- and exo-modes. Agarase A (AgaA) is an endo-glycoside hydrolase of family 16 considered to initiate degradation of agarose. Agaro-oligosaccharide binding at a unique surface binding site (SBS) in AgaA from Zobellia galactanivorans was investigated by computational methods in conjunction with a structure/sequence guided approach of site-directed mutagenesis probed by surface plasmon resonance binding analysis of agaro-oligosaccharides of DP 4-10. The crystal structure has shown that agaro-octaose interacts via H-bonds and aromatic stacking along 7 subsites (L through R) of the SBS in the inactive catalytic nucleophile mutant AgaA-E147S. D271 is centrally located in the extended SBS where it forms H-bonds to galactose and 3,6-anhydrogalactose residues of agaro-octaose at subsites O and P. We propose D271 is a key residue in ligand binding to the SBS. Thus AgaA-E147S/D271A gave slightly decreasing KD values from 625 ± 118 to 468 ± 13 μM for agaro-hexaose, -octaose and -decaose, which represent 3-4-fold reduced affinity compared to AgaA-E147S. Molecular dynamics simulations and interaction analyses of AgaA-E147S/D271A indicated disruption of an extended H-bond network supporting that D271 is critical for the functional SBS. Notably, neither AgaA-E147S/W87A nor AgaA-E147S/W277A, designed to eliminate stacking with galactose residues at subsites O and Q, respectively, were produced in soluble form. W87 and W277 may thus control correct folding and structural integrity of AgaA. This article is protected by copyright. All rights reserved.

Here we present a water-in-air droplet platform for micro-compartmentalization for single molecule guided synthesis and analysis consisting of a flow-system hosting dense arrays of aqueous microdroplets on a glass surface surrounded by air. The droplets are formed in a few seconds by passing a waterfront over the array of hydrophilic spots surrounded by a hydrophobic coating, thus forming a micro-droplet array (MDA). The droplet volumes are tunable from approximately 50 femtoliter to 20 picoliter by adjusting the size of the hydrophilic spots. MDAs consisting of femtoliter volume droplets were stable for more than 24 hours in air at 37 °C in a reversibly sealed flow-system, thus allowing us to perform assays that require long incubations in the droplets. Using differently fluorescing liquids, it was further shown that droplets can be reformed on the same MDA several times by passing a new liquid plug over the surface, and that fluorescence from one reaction can be washed away with little to no carry-over, hence allowing for multistep reactions to be carried out on the system. The MDA created by an air/water interface supported digital immunoassays as was demonstrated by measuring the Aβ42 peptide in cerebrospinal fluid of Alzheimers patients and control patients. To demonstrate a two step droplet assay, first, histidine tagged peptides were expressed in the droplets and bound to the droplet-enclosed surface. Subsequently, the his-tagged peptides were detected using enzyme-conjugated antibodies in a second droplet generation step. As such, the chip demonstrates features necessary for library preparations for high throughput screening applications.

Site-specific pKa values measured by NMR spectroscopy provide essential information on protein electrostatics, the pH-dependence of protein structure, dynamics and function, and constitute an important benchmark for protein pKa calculation algorithms. Titration curves can be measured by tracking the NMR chemical shifts of several reporter nuclei versus sample pH. However, careful analysis of these curves is needed to extract residue-specific pKa values since pH-dependent chemical shift changes can arise from many sources, including through-bond inductive effects, through-space electric field effects, and conformational changes. We have re-measured titration curves for all carboxylates and His 15 in Hen Egg White Lysozyme (HEWL) by recording the pH-dependent chemical shifts of all backbone amide nitrogens and protons, Asp/Glu side chain protons and carboxyl carbons, and imidazole protonated carbons and protons in this protein. We extracted pKa values from the resulting titration curves using standard fitting methods, and compared these values to each other, and with those measured previously by 1H NMR (Bartik et al., Biophys J 1994;66:1180–1184). This analysis gives insights into the true accuracy associated with experimentally measured pKa values. We find that apparent pKa values frequently differ by 0.5–1.0 units depending upon the nuclei monitored, and that larger differences occasionally can be observed. The variation in measured pKa values, which reflects the difficulty in fitting and assigning pH-dependent chemical shifts to specific ionization equilibria, has significant implications for the experimental procedures used for measuring protein pKa values, for the benchmarking of protein pKa calculation algorithms, and for the understanding of protein electrostatics in general. Proteins 2011. © 2010 Wiley-Liss, Inc.

NMR-monitored pH titration experiments are routinely used to measure site-specific protein pKa values. Accurate experimental pKa values are essential in dissecting enzyme catalysis, in studying the pH-dependence of protein stability and ligand binding, in benchmarking pKa prediction algorithms, and ultimately in understanding electrostatic effects in proteins. However, due to the complex ways in which pH-dependent electrostatic and structural changes manifest themselves in NMR spectra, reported apparent pKa values are often dependent on the way that NMR pH-titration curves are analyzed. It is therefore important to retain the raw NMR spectroscopic data to allow for documentation and possible re-interpretation. We have constructed a database of primary NMR pH-titration data, which is accessible via a web interface. Here, we report statistics of the database contents and analyze the data with a global perspective to provide guidelines on best practice for fitting NMR titration curves. Titration_DB is available at http://enzyme.ucd.ie/Titration_DB. Proteins 2010. (c) 2009 Wiley-Liss, Inc.

Ubiquitin-conjugating enzymes (E2s or Ubcs) are essential components in the ubiquitination apparatus. These enzymes accept ubiquitin from an E1 enzyme and then, usually with the aid of an E3 enzyme, donate the ubiquitin to the target protein. The function of E2 relies critically on the chemistry of its active site cysteine residue since this residue must form a thioester bond with the carboxyl terminus of ubiquitin. Despite the plethora of structural information that is available, there has been a notable dearth of information regarding the chemical basis of E2 function. Toward filling this large void in our understanding of E2 function, we have examined the pK(a) of the active site cysteine using a combination of experimental and theoretical approaches. We find, remarkably, that the pK(a) of the active site cysteine residue is elevated by approximately 2 pH units above that of a free cysteine. We have identified residues that contribute to the increase in this pK(a). On the basis of experimental values obtained with three different E2 proteins, we believe this to be a general and important characteristic of E2 protein chemistry. Sequence comparison suggests that the electrostatic environment is maintained not through strict residue conservation but through different combinations of residues near the active site. We propose that the elevated pK(a) is a regulatory mechanism that prevents the highly exposed cysteine residue in free E2 from reacting promiscuously with electron deficient chemical moieties in the cell.

FOXP2 is a member of the P subfamily of FOX transcription factors, the DNA-binding domain of which is the winged helix forkhead domain (FHD). In this work we show that the FOXP2 FHD is able to bind to various DNA sequences, including a novel sequence identified in this work, with different affinities and rates as detected using surface plasmon resonance. Combining the experimental work with molecular docking, we show that high-affinity sequences remain bound to the protein for longer, form a greater number of interactions with the protein and induce a greater structural change in the protein than low-affinity sequences. We propose a binding model for the FOXP2 FHD that involves three types of binding sequence: low affinity sites which allow for rapid scanning of the genome by the protein in a partially unstructured state; moderate affinity sites which serve to locate the protein near target sites and high-affinity sites which secure the protein to the DNA and induce a conformational change necessary for functional binding and the possible initiation of downstream transcriptional events.

We have previously reported the presence of a 70 kDa insulin-like growth factor (IGF)-II-specific binding protein in chicken serum using Western ligand blotting approaches. In order to ascertain the identity of this 70 kDa IGF-II binding species, the protein has been purified from chicken serum using a combination of ion-exchange and gel-permeation chromatography. Interestingly, amino acid sequencing of the purified protein revealed that it has the same N-terminal sequence as chicken vitronectin (VN). The protein has the ability to specifically bind IGF-II and not IGF-I as determined by ligand blotting, cross-linking and competitive binding assay approaches. In addition, the protein binds 125I-des(1-6)-IGF-II, suggesting that the interaction with IGF-II is different to those with other characterized IGF-binding proteins. Importantly, we have ascertained that both human and bovine VN also specifically bind IGF-II. These results are particularly relevant in the light of the recent report that the urokinase-type plasminogen activator receptor, a protein that also binds VN, has been shown to associate with the cation-independent mannose-6-phosphate/IGF-II receptor and suggest a possible role for IGF-II in cell adhesion and invasion.

The stability of serine proteases is of major importance for their application in industrial processes. Here we study the determinants of the stability of a Nocardiopsis prasina serine protease using fast residual activity assays, a feature classification algorithm, and structure-based energy calculation algorithms for 121 micropurified mutant enzyme clones containing multiple point mutations. Using a multivariate regression analysis, we deconvolute the data for the mutant clones and find that mutations of residues Asn47 and Pro124 are deleterious to the stability of the enzyme. Both of these residues are situated in loops that are known to be important for the stability of the highly homologous α-lytic protease. Structure-based energy calculations with PEATSA give a good general agreement with the trend of experimentally measured values but also identify a number of clones that the algorithm fails to predict correctly. We discuss the significance of the results in relation to the structure and function of closely related proteases, comment on the optimal experimental design when performing high-throughput experiments for characterizing the determinants of protein stability, and discuss the performance of structure-based energy calculations with complex data sets such as the one presented here.

While numerous researchers have used rat models to investigate the in vivo actions of IGF-I, interpretation of the results in terms of true concentrations of rat IGF-I (rIGF-I) in plasma has been hampered by the absence of homologous reference standards. In order to overcome this we have produced recombinant rIGF-I (rrIGF-I) from Escherichia coli using procedures similar to those we have previously described for the production of other recombinant IGFs. The rrIGF-I is indistinguishable from serum-derived rIGF-I when characterized in a number of in vitro assays including ability to stimulate protein synthesis and inhibit protein degradation in cultured rat cells, as well as in interactions with the rat type-1 IGF receptor and with rat IGF-binding proteins. Moreover, both the serum-derived and the recombinant rat proteins are similar to recombinant human IGF-I (rhIGF-I) in these assays. However, differences between the human and rat IGFs are apparent when tested in immunoassays using some antibodies raised against rhIGF-I. Furthermore, the differences between rhIGF-I and rrIGF-I are even greater when rhIGF-I is used as the competing radiolabel in these assays, a situation that can lead to a two- to threefold underestimation of the actual concentration of IGF-I in rat plasma. These results indicate that, while immunoassays employing antibodies raised against rhIGF-I and rhIGF-I reference standards reliably indicate trends in IGF-I concentrations in rat plasma, the true amounts of rIGF-I present can only be assured in an assay using homologous tracer and reference peptides. Journal of Endocrinology (1996) 149, 379–387

Bovine cheese whey was investigated as a source of growth-stimulating factors that might replace or supplement fetal bovine serum in cell culture. Although some cell growth activity was demonstrated in whey or whey ultrafiltrates, enrichment on the basis of molecular size was not useful because the most abundant whey proteins, beta-lactoglobulin and alpha-lactalbumin, have molecular masses that are similar to most known growth factors. Instead, cation-exchange chromatography was selected as an enrichment process because, in contrast to the major whey proteins, growth factors generally have basic isoelectric points. Adsorption to and elution from Sepharose Fast Flow-S resin yielded an extract containing only 1 to 2% of whey protein but substantial growth-promoting activities on Balb/c 3T3 cells, L6 myoblasts, and human skin fibroblasts. The growth activity could be separated from lactoferrin, one of the prominent basic proteins present, through a stepwise elution from the resin. The resultant fraction, which contained lactoperoxidase as the most abundant protein stimulated the growth of the three cell lines at protein concentrations that were 2- to 20-fold lower than observed with fetal bovine serum. Immunoglobulin G could be removed by affinity chromatography, or lactoperoxidase could be inactivated by heat, without significant losses to the growth-promoting capacity of the fraction. These results suggest that enrichment of growth factors by cation-exchange chromatography offers a practical method for the large-scale isolation of an extract from cheese whey that stimulates cell growth.

Large amounts of data are being generated annually on the connection between the sequence, structure and function of proteins using site-directed mutagenesis, protein design and directed evolution techniques. These data provide the fundamental building blocks for our understanding of protein function, molecular biology and living organisms in general. However, much experimental data are never deposited in databases and is thus ‘lost’ in journal publications or in PhD theses. At the same time theoretical scientists are in need of large amounts of experimental data for benchmarking and calibrating novel predictive algorithms, and theoretical progress is therefore often hampered by the lack of suitable data to validate or disprove a theoretical assumption. We present PEAT (Protein Engineering Analysis Tool), an application that integrates data deposition, storage and analysis for researchers carrying out protein engineering projects or biophysical characterization of proteins. PEAT contains modules for DNA sequence manipulation, primer design, fitting of biophysical characterization data (enzyme kinetics, circular dichroism spectroscopy, NMR titration data, etc.), and facilitates sharing of experimental data and analyses for a typical university-based research group. PEAT is freely available to academic researchers at http:// enzyme.ucd.ie/PEAT.