Search

It is known that the slot frequency vibration is the one of the main components in electromagnetic vibration spectrum of permanent magnet DC motors (PMDCM). After finding that the vibration reduction scheme of the piecewise varying pole width (PVPW) is only effective for the odd order harmonic of slot frequency vibrations by analytical method, the PM pole with sawtooth edge is put forward to reduce all harmonic components of slot frequency vibrations of PMDCM. In this article, after the air gap flux density and radial force density are analyzed, the two vibration sources, radial force and bending moment, are derived for the motor with sawtooth edge poles (SEP). Then the optimized pole shape is obtained to reduce all harmonic components of both the radial force and bending moment at the same time. Three dimensional finite element method of electromagnetic field and structure are used to calculate the magnetic flux density, radial force and vibration for the motors of PVPW and SEP. Three permanent magnet motors with fixed pole width (FPW), PVPW and SEP are manufactured and tested. The comparison and verification show that SEP is better than the other two schemes in general. [ABSTRACT FROM AUTHOR]

The electromagnetic vibration of permanent magnet brush dc (PMBDC) motors has its distinct feature, where only slot-frequency related components exist. Skew slot technique is naturally recalled to mitigate the slot-frequency vibration. Unfortunately, the straight skew slot normally used is not as effective as the mitigation of tooth harmonic electromotive force (EMF) or cogging torque. First, in this paper, the principle of vibration mitigation by straight skew is discussed and compared with mitigation of tooth harmonic EMF and cogging torque. The reason for poor effect of straight skew slot is illustrated by a specifically-designed experiment and finite-element method (FEM) simulation. In order to solve this problem, the zigzag skew PM pole technique is proposed for PMBDC motors for the first time, which overcomes the disadvantage of straight skew slot. The pulsating radial force and bending moment, two main causes of electromagnetic vibration, are derived and analyzed analytically and by the three-dimensional FEM for zigzag skew PM poles. At last, the experiments on two PMBDC motors, one with straight skew slots and the other with zigzag skew PM poles, are conducted to verify the effectiveness of the zigzag pole technique. [ABSTRACT FROM AUTHOR]

This paper focuses on the electromagnetic vibration and its reduction in PM brush dc motors. First, the air gap flux density distribution and the radial force density distribution are derived in detail, and compared with the results of the finite element method. Next, two types of vibration sources, called pulsating force and bending moment, are analyzed. Then, two passive improvement methods, called varied PM pole width in axial direction and copper ring, are proposed to reduce the magnetic forces and their vibration, and their principles of the vibration reduction are described in detail. For further explanation, a rotor-skewed motor is used for comparison, and the radial force on the motor is discussed and the influence of four different thicknesses of copper ring on the motor vibration is analyzed. Finally, three 2p/24s sample motors are manufactured and the experimental vibration results confirm the analysis and the proposed improvement technique. [ABSTRACT FROM AUTHOR]

This paper presents a PM pole with varied width in the axial direction for vibration mitigation in permanent magnet brush dc motors, which is proposed to decrease the deformation caused by radial pulsating force and bending moment together. First, the air gap flux density distribution and radial force density distribution are derived in detail. After two types of vibration modes and their reasons as pulsating force and bending moment are analyzed, the difficulty in vibration mitigation is pointed out. By investigating the change rule of the pulsating force and bending moment with PM pole width, a type of PM pole with varied width in the axial direction is proposed. Its principle of deformation reduction is presented, and the optimized pole shape is derived. A three-dimensional finite-element method is used to calculate the magnetic field, Maxwell force, modal analysis, and deformation of motors. In order to verify the effectiveness of the proposed method, the vibration of the proposed motor is compared with the other three types of traditional motors, including skewing slot or skewing pole. Finally, experimental results of two types of motors are compared to validate the proposed technique. [ABSTRACT FROM AUTHOR]

This paper presents the detail analysis of the radial force and bending moment responsible for vibration in the stator permanent magnet synchronous motors (PMSMs). The vibration characteristics, especially vibration mode, of stator PMSM are studied. First, the air-gap flux density distribution and radial force density distribution are derived in detail. Then, two types of vibration modes, called pulsating and bending modes, and their reasons as pulsating force and bending moment are analyzed and elaborated which are not analyzed and verified before. In addition, the relationships between these two vibration shapes and pole width, pole number, and slot number are analyzed. To confirm the analysis and theory, the multi-probe mode-included test method of vibration acceleration is used to obtain the vibration mode information of motors, and the experimental results on a 6-pole/36-slot stator PMSM match well with the simulation results. [ABSTRACT FROM AUTHOR]

The vibration mode of electric machines is an important characteristic of vibration, which is useful for finding the vibration sources with different frequencies, but has always been neglected before. In this paper, the vibration characteristics, especially the vibration mode, of permanent magnet (PM) brush DC motors are studied. First, the air gap flux density distribution and radial force density distribution are derived in detail and compared with the results of the finite-element method. Then, two types of vibration modes, called pulsating and bending modes, and their reasons as pulsating force and bending moment are analyzed and elaborated, which have not been analyzed and verified sufficiently before. In addition, the relationships between these two vibrations and pole width, pole number, and slot number are analyzed. The main modal shapes and their frequencies are acquired from the modal test. To confirm the analysis and theory, the multiprobe mode-included test method of vibration acceleration is proposed and emphasized to obtain the vibration mode information of motors, and the experimental results on a PM brush DC motor match well with the simulation results. [ABSTRACT FROM AUTHOR]