Search

This paper focuses on the electromagnetic vibration and its reduction in PM brush dc motors. First, the air gap flux density distribution and the radial force density distribution are derived in detail, and compared with the results of the finite element method. Next, two types of vibration sources, called pulsating force and bending moment, are analyzed. Then, two passive improvement methods, called varied PM pole width in axial direction and copper ring, are proposed to reduce the magnetic forces and their vibration, and their principles of the vibration reduction are described in detail. For further explanation, a rotor-skewed motor is used for comparison, and the radial force on the motor is discussed and the influence of four different thicknesses of copper ring on the motor vibration is analyzed. Finally, three 2p/24s sample motors are manufactured and the experimental vibration results confirm the analysis and the proposed improvement technique. [ABSTRACT FROM AUTHOR]

This paper presents a PM pole with varied width in the axial direction for vibration mitigation in permanent magnet brush dc motors, which is proposed to decrease the deformation caused by radial pulsating force and bending moment together. First, the air gap flux density distribution and radial force density distribution are derived in detail. After two types of vibration modes and their reasons as pulsating force and bending moment are analyzed, the difficulty in vibration mitigation is pointed out. By investigating the change rule of the pulsating force and bending moment with PM pole width, a type of PM pole with varied width in the axial direction is proposed. Its principle of deformation reduction is presented, and the optimized pole shape is derived. A three-dimensional finite-element method is used to calculate the magnetic field, Maxwell force, modal analysis, and deformation of motors. In order to verify the effectiveness of the proposed method, the vibration of the proposed motor is compared with the other three types of traditional motors, including skewing slot or skewing pole. Finally, experimental results of two types of motors are compared to validate the proposed technique. [ABSTRACT FROM AUTHOR]