Search

A spiral-artificial basilar membrane (S-ABM) sensor is reported that mimics the basilar membrane (BM) of the human cochlea and can detect sound by separating it into 24 sensing channels based on the frequency band. For this, an analytical function is proposed to design the width of the BM so that the frequency bands are linearly located along the length of the BM. To fabricate the S-ABM sensor, a spiral-shaped polyimide film is used as a vibrating membrane, with maximum displacement at locations corresponding to specific frequency bands of sound, and attach piezoelectric sensor modules made of poly(vinylidene fluoride-trifluoroethylene) film on top of the polyimide film to measure the vibration amplitude at each channel location. As the result, the S-ABM sensor implements a characteristic frequency band of 96-12,821 Hz and 24-independent critical bands. Using real-time signals from discriminate channels, it is demonstrated that the sensor can rapidly identify the operational noises from equipment processes as well as vehicle sounds from environmental noises on the road. The sensor can be used in a variety of applications, including speech recognition, dangerous situation recognition, hearing aids, and cochlear implants, and more., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Patients with sensorineural hearing loss can recover their hearing using a cochlear implant (CI). However, there is a need to develop next-generation CIs to overcome the limitations of conventional CIs caused by extracorporeal devices. Recently, artificial basilar membranes (ABMs) are actively studied for next-generation CIs. The ABM is an acoustic transducer that mimics the mechanical frequency selectivity of the BM and acoustic-to-electrical energy conversion of hair cells. This paper presents recent progress in biomimetic ABMs. First, the characteristics of frequency selectivity of the ABMs by the trapezoidal membrane and beam array are addressed. Second, to reflect the latest research of energy conversion technologies, ABMs using various piezoelectric materials and triboelectric-based ABMs are discussed. Third, in vivo evaluations of the ABMs in animal models are discussed according to the target position for implantation. Finally, future perspectives of ABM studies for the development of practical hearing devices are discussed., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A triboelectric-based artificial basilar membrane (TEABM) can mimic cochlear tonotopy by triboelectrification between Kapton film and aluminum foil. The two films are stacked and clamped to form a beam structure. The TEABM tonotopy is tested using an animal model to verify the feasibility of a self-powered acoustic sensor for a prototype cochlear implant., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two types of microfabricated acoustic transducers-the resonator array of isolated beams (RAIB) and the resonator array of coupled beams (RACB)-were built using MEMS technology. The frequency selectivity of the two types of transducers was qualitatively compared using the transfer functions measured with a scanning laser Doppler vibrometer (SLDV). Each RAIB beam operated as a band-pass filter in the proximity to the corresponding resonance frequency, thereby showing the frequency-selective feature of the basilar membrane (BM). However, the frequency selectivity of RACB was poor because the SiO membrane, which mechanically coupled the neighboring beams, suppressed the independent response of each beam. The influence of the mechanical coupling of the SiO membrane was simulated using lumped parametric models. Simulation results showed that the coupling stiffness of the SiO membrane may significantly undermine the frequency selectivity of the resonator array. The comparison of the frequency-selective performance revealed that RAIB is a better option than RACB for mimicking the tonotopy of BM. [ABSTRACT FROM AUTHOR]

The study presented in this paper assessed the frequency selectivity of an artificial basilar membrane (ABM) constructed using a piezoelectric beam array with narrow supports. Three ABM samples were constructed. Each ABM contained 16 beams with various lengths in a one-dimensional array. To experimentally assess the frequency selectivity of the ABM, mechanical vibration induced either by an electrical or an acoustic stimulus was measured with a scanning laser-Doppler vibrometer. The electro-mechanical and acousto-mechanical transfer functions were defined for the same purpose. The tonotopy of each beam array was visualized by post-processing the experimental results. Finite element analyses were conducted to numerically compute the resonance frequencies, identify the associated vibrational modes, and evaluate the harmonic responses of the beams. The influence of the residual stresses existing in the beams was reflected in the geometric models by introducing three different levels of arc-shaped lateral deformations in the beams. The harmonic analyses revealed that each beam of the ABM samples presented independent band-pass characteristics. The experiments and simulations commonly showed a frequency selectivity of the fabricated ABMs in the range of 2-20 kHz. Therefore, the device is suitable for development of a totally implantable artificial cochlea, implementing a mechanical frequency analyzer. This work is part of research to develop a prototype of a totally implantable artificial cochlea. [ABSTRACT FROM AUTHOR]

We proposed a piezoelectric artificial basilar membrane (ABM) composed of a microelectromechanical system cantilever array. The ABM mimics the tonotopy of the cochlea: frequency selectivity and mechanoelectric transduction. The fabricated ABM exhibits a clear tonotopy in an audible frequency range (2.92-12.6 kHz). Also, an animal model was used to verify the characteristics of the ABM as a front end for potential cochlear implant applications. For this, a signal processor was used to convert the piezoelectric output from the ABM to an electrical stimulus for auditory neurons. The electrical stimulus for auditory neurons was delivered through an implanted intra-cochlear electrode array. The amplitude of the electrical stimulus was modulated in the range of 0.15 to 3.5 V with incoming sound pressure levels (SPL) of 70.1 to 94.8 dB SPL. The electrical stimulus was used to elicit an electrically evoked auditory brainstem response (EABR) from deafened guinea pigs. EABRs were successfully measured and their magnitude increased upon application of acoustic stimuli from 75 to 95 dB SPL. The frequency selectivity of the ABM was estimated by measuring the magnitude of EABRs while applying sound pressure at the resonance and off-resonance frequencies of the corresponding cantilever of the selected channel. In this study, we demonstrated a novel piezoelectric ABM and verified its characteristics by measuring EABRs. [ABSTRACT FROM AUTHOR]