Search

Ketopantoate hydroxymethyltransferase (KPHMT) plays a pivotal role in d-pantothenic acid biosynthesis. Most KPHMTs are homodecamers with low thermal stability, posing challenges for protein engineering and limiting output enhancement. Previously, a high-enzyme activity KPHMT mutant (K25A/E189S) from Corynebacterium glutamicum was screened as mother strain (M0). Building upon this strain, our study focused on interface engineering modifications, employing a multifaceted approach including integrating folding-free energy calculation, B -factor analysis, and conserved site analysis. Preliminary screening led to the selection of five mutants in the interface─E106S, E98T, E98N, S247I, and S247D─showing improved thermal stability, culminating in the double-site mutant M8 (M0-E98N/S247D). M8 exhibited a T 1/2 value of 288.79 min at 50 °C, showing a 3.29-fold increase compared to M0. Meanwhile, the T m value of M8 was elevated from 53.2 to 59.6 °C. Investigations of structural and molecular dynamics simulations revealed alterations in surface electrostatic charge distribution and the formation of increased hydrogen bonds between subunits, contributing to enhanced thermal stability. This investigation corroborates the efficacy of interface engineering modifications in bolstering KPHMT stability while showing its potential for positively impacting industrial d-pantothenic acid synthesis.

(S)-2-chlorophenylglycine ((S)-CPG) is a key chiral intermediate for the synthesis of clopidogrel. Herein, a novel, efficient and environmentally friendly chemo-enzymatic route for the preparation of optically pure (S)-CPG was developed. A straightforward chemical synthesis of the corresponding prochiral keto acid substrate (2-chlorophenyl)glyoxylic acid (CPGA) was developed with 91.7% yield, which was enantioselectively aminated by leucine dehydrogenase (LeuDH) to (S)-CPG. Moreover, protein engineering of LeuDH was performed via directed evolution and semi-rational design. A beneficial variant EsLeuDH-F362L with enlarged substrate-binding pocket and increased hydrogen bond between K77 and substrate CPGA was constructed, which exhibited 2.1-fold enhanced specific activity but decreased thermal stability. Coupled with a glucose dehydrogenase from Bacillus megaterium (BmGDH) for NADH regeneration, EsLeuDH-F362L completely converted up to 0.5 M CPGA to (S)-CPG in 8 h at 40 °C., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Conflict of interest The authors declare no financial or commercial conflicts of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Echinocandin B deacylase (ECBD) from Actinoplanes utahensis can be applied to produce echinocandin B nucleus (ECBN), an essential intermediate of the echinocandins antifungal drugs such as anidulafungin. To date, the expression of ECBD has been limited to Streptomyces. To achieve the active expression of ECBD in Escherichia coli (E. coli), we constructed a plasmid carrying two subunits of ECBD for T7 RNA polymerase driven transcription of dicistron messenger after codon optimization. Subsequently, the introduction of peptide tags in the recombinant ECBD was adopted to reduce the formation of inclusion bodies and enhance the ECBD solubility. The peptide tags with the opposite electrostatic charge, hexa-lysine (6K) and GEGEG (GE), exhibited the best positive effect, which was verified by activity assay and structural simulation. After that, optimization of culture conditions and characterization of ECBD were conducted, the optimal pH and temperature were 7.0 and 60 °C. It is the first report concerning the functional expression of ECBD in the host E. coli. Our results reported here can provide a reference for the high-level expression of other deacylases with respect to a possible industrial application., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The miglitol intermediate, 6-(N-hydroxyethyl)-amino-6-deoxy-α-l-sorbofuranose (6NSL), is catalyzed from N-2-hydroxyethyl glucamine (NHEG) by resting cells of Gluconobacter oxydans. One of the key factors limiting 6NSL production was the availability of oxygen during both cell cultivation and biotransformation of NHEG to 6NSL. Based on G. oxydans/pBBR1-sldAB-pqqABCDE-tldD (G. oxydans/AB-PQQ), the Vitreoscilla hemoglobin (VHb) was heterologously expressed in G. oxydans to enhance oxygen transfer efficiency and improve 6NSL production. The recombinant G. oxydans/AB-PQQ-VHb displayed higher biomass and NHEG oxidation activity than the control stain. The transcription levels of respiratory chain-related enzyme genes in G. oxydans/AB-PQQ-VHb exhibited up-regulation, indicating that the presence of VHb promoted the respiration. The dissolved oxygen (DO) concentration for cell cultivation was optimized in a 5-L stirred bioreactor. At a DO concentration of 20%, the maximum volumetric oxidation activity of NHEG of G. oxydans/AB-PQQ-VHb in the stirred bioreactor reached 168.3 ± 3.2 U/L. Furthermore, the biotransformation of NHEG to 6NSL using G. oxydans/AB-PQQ-VHb was carried out under different oxygen tensions to investigate the effect of oxygen on 6NSL production. Finally, up to 87.5 ± 5.9 g/L 6NSL was accumulated in the reaction mixture within 16 h when the DO was controlled at 30%., (Copyright © 2020 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

Objective: To characterize a recombinant isomerase that can catalyze the isomerization of sucrose into isomaltulose and investigate its application for the enzymatic production of isomaltulose., Results: A sucrose isomerase gene from Erwinia sp. Ejp617 was synthesized and expressed in Escherichia coli BL21(DE3). The enzymatic characterization revealed that the optimal pH and temperature of the purified sucrose isomerase were 6.0 and 40 °C, respectively. The enzyme activity was slightly activated by Mn 2+ and Mg 2+ , but partially inhibited by Ca 2+ , Ba 2+ , Cu 2+ , Zn 2+ and EDTA. The kinetic parameters of K m and V max for sucrose were 69.28 mM and 118.87 U/mg, respectively. The time course showed that 240.9 g/L of isomaltulose was produced from 300 g/L of sucrose, and the yield reached 80.3% after bioreaction for 180 min., Conclusions: This recombinant enzyme showed excellent capability for biotransforming sucrose to isomaltulose at the substrate concentration of 300 g/L. Further investigations should be carried out focusing on selection of suitable heterologous expression system with the aim to improve its expression level.

A chemoenzymatic strategy was developed for the highly efficient synthesis of l-phosphinothricin employing a robust immobilized amidase. An enzymatic hydrolysis of 500 mM N -phenylacetyl-d,l-phosphinothricin resulted in 49.9% conversion and 99.9% ee of l-phosphinothricin within 6 h. To further evaluate the bioprocess for l-phosphinothricin production, the biotransformation was performed for 100 batches under a stirred tank reactor with an average productivity of 8.21 g L -1 h -1 . Moreover, unreacted N -phenylacetyl-d-phosphinothricin was racemized and subjected to the enzymatic hydrolysis, giving l-phosphinothricin with a 22.3% yield. A total yield of 69.4% was achieved after one recycle of N -phenylacetyl-d-phosphinothricin. Significantly, this chemoenzymatic approach shows great potential in the industrial production of l-phosphinothricin.

Transaminase responsible for alienating prochiral ketone compound is applicable to asymmetric synthesis of herbicide L-phosphinothricin (L-PPT). In this work, the covalent immobilization of recombinant transaminase from Citrobacter koseri (CkTA) was investigated on different epoxy resins. Using optimum ES-105 support, a higher immobilized activity was obtained via optimizing immobilization process in terms of enzyme loading, coupling time and initial PLP concentration. Crucially, due to blocking unreacted epoxy groups on support surface with amino acids, the reaction temperature of blocked immobilized biocatalyst was enhanced from 37 to 57 °C. Its thermostability at 57 °C was also found to be superior to that of free CkTA. The K m value was shifted from 36.75 mM of free CkTA to 39.87 mM of blocked immobilized biocatalyst, demonstrating that the affinity of enzyme to the substrate has not been apparently altered. Accordingly, the biocatalyst performed the consecutive synthesis of L-PPT for 11 cycles (yields>91%) with retaining more than 91.13% of the initial activity. The seemingly the highest reusability demonstrates this biocatalyst has prospective for reducing the costs of consecutive synthesis of L-PPT with high conversion.

Tyrosine phenol-lyase (TPL) is a valuable and cost-effective biocatalyst for the biosynthesis of L-tyrosine and its derivatives, which are valuable intermediates in the pharmaceutical industry. A TPL from Morganella morganii (Mm-TPL) was overexpressed in Escherichia coli and characterized. Mm-TPL was determined as a homotetramer with molecular weight of 52 kDa per subunit. Its optimal temperature and pH for β-elimination of L-tyrosine were 45 °C and pH 8.5, respectively. Mm-TPL manifested strict substrate specificity for the reverse reaction of β-elimination and ortho- and meta-substituted phenols with small steric size were preferred substrates. The enzyme showed excellent catalytic performance for synthesis of L-tyrosine, 3-fluoro-L-tyrosine, and L-DOPA with a yield of 98.1%, 95.1%, and 87.2%, respectively. Furthermore, the fed-batch bioprocess displayed space-time yields of 9.6 g L -1  h -1 for L-tyrosine and 4.2 g L -1  h -1 for 3-fluoro-L-tyrosine with a yield of 67.4 g L -1 and 29.5 g L -1 , respectively. These results demonstrated the great potential of Mm-TPL for industrial application.

L-phosphinothricin (L-PPT) is a competitive and environmentally friendly herbicide. To develop an efficient approach for synthesis of l-PPT, a kinetic resolution route with a novel aminoacylase (SmAcy) mined from Stenotrophomonas maltophilia using N-acetyl-PPT as a substrate was first constructed. This SmAcy exhibited high hydrolytic activity and excellent enantioselectivity (E > 200) toward N-acetyl-PPT. Optically pure l-PPT (> 99.9 % ee p ) was acquired with high conversion (> 49 %) within 4 h by the whole cells. On the basis of the docking analysis, a main reason for high enantioselectivity (E > 200) of SmAcy towards l-enantiomer would be that the D-N-acetyl-PPT cannot interact with the key general acid-base residue and the metal ions. A low-cost and simple preparation process of the substrate from commercially available racemic PPT for production of L-PPT was provided. A chemical racemization method of the unreacted D-enantiomer of substrate was also provided to recycle the unwanted substrate enantiomer. This study provides a potential route for the industrial production of L-PPT., (Copyright © 2019 Elsevier Inc. All rights reserved.)

A highly active secretory expression system in Bacillus subtilis was constructed for enhancing the heterogeneous secretory expression efficiency of a recombinant amidase from Bacillus megaterium (Bm-Ami). Initially, six promoters P lytR , P spoVG , P aprE , P yvyD , P ftsH , P amyE were screened out from 33 endogenous phase-dependent promoters via the strategy of promoter engineering which showed higher transcriptional levels than the original promoter P cdd . Afterwards, a secretory expression system pBSHdd2-20 containing a dual-promoter P amyE-cdd and a signal peptide Pac was constructed showing an extracellular Bm-Ami activity of 135.58 U mL -1 during shake-flask cultivation, which was 3.58-fold greater than that with plasmid pBSH1 (control). Finally, extracellular amidase activity of a strain containing the plasmid pBSHdd2-20 reached 430 U mL -1 (equal to 10.8 mg mL -1 ) and 10.72 U mg -1 DCW after 52 h in a scale-up fermentation, which was the highest secretory efficiency for Bm-Ami in all studies to date. In conclusion, a highly secretory system constructed in this study can be applied for the industrial production of amidase and provides a basis for the development of an excellent secretory expression system for similar proteins., (Copyright © 2019 Elsevier B.V. All rights reserved.)

t-Butyl 6-cyano-(3R,5R)-dihydroxyhexanoate ((3R,5R)-2) is an important building-block of atorvastatin. In our previous work, a variant KlAKR-Y295W-W296 L (designated as M1) of Kluyveromyces lactis aldo-keto reductase (wild type (WT) KlAKR, M0) was developed, which possessed strict diastereoselectivity but moderate activity towards t-butyl 6-cyano-(5R)-hydroxy-3-oxohexanoate ((5R)-1). To further improve its catalytic performance, semi-rational engineering of M1 was performed in present work, and the "best" varaint KlAKR-Y295W-W296L-I125V-S30P-Q212R-I63W (M8) was developed. M8's K m B towards (5R)-1 was 2.02 mM, and the catalytic efficiency (k cat /K m B ) value was 36.31 s -1  mM -1 , which was 1.9-fold higher than that of the parent M1. Compared with M1, the half-life t 1/2 ,  T S50 50 and T P50 50 of M8 were improved. Under the optimized conditions, (5R)-1 at load of up to 80 g L -1 was completely reduced in 1.5 h by M8 along with Exiguobacterium sibiricum glucose dehydrogenase (EsGDH) for cofactor regeneration, producing (3R,5R)-2 in de p > 99.5% and space-time yields (STY) of 660.0 g L -1 d - 1 ., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Escherichia coli was engineered to produce d-pantothenic acid via systematic metabolic engineering. Firstly, genes of acetohydroxy acid synthase II, pantothenate synthetase, 3-methyl-2-oxobutanoate hydroxymethyltransferase, 2-dehydropantoate 2-reductase and ketol-acid reductoisomerase were edited in E. coli W3110 with a resulting d-pantothenic acid yield of 0.49 g/L. Expressions of valine-pyruvate aminotransferase and branched-chain-amino-acid aminotransferase were then attenuated to decrease the carbon flux in l-valine biosynthetic pathway which is a competing pathway to the d-pantothenic acid biosynthetic pathway, and the yield increased to 1.48 g/L. Mutagenesis of pantothenate kinase and deletion of threonine deaminase further increased the production to 1.78 g/L. Overexpressions of panC and panB from Corynebacterium glutamicum enhanced the production by 29%. In fed-batch fermentations, strain DPA-9/pTrc99a-panBC(C.G) exhibited a highest d-pantothenic acid yield of 28.45 g/L. The findings in this study demonstrate the systematic metabolic engineering in Escherichia coli W3110 would be a promising strategy for industrial production of d-pantothenic acid., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

6-(N-hydroxyethyl) amino-6-deoxy-l-sorbofuranose (6NSL) is the direct precursor of miglitol for diabetes therapy. The regio- and stereo-selective dehydrogenation offered by the membrane-bound d-sorbitol dehydrogenase (mSLDH) from Gluconobacter oxydans provides an elegant enzymatic method for 6NSL production. In this study, two subunits sldA and sldB of mSLDH were introduced into G. oxydans ZJB-605, and the specific enzyme activity of mSLDH towards NHEG was enhanced by 2.15-fold. However, the endogenous PQQ level was dramatically reduced in the recombinant strain and became a bottleneck to support the holo-enzyme activity. A combined supplementation of four amino acids (Glu, Ile, Ser, Arg) involved in biosynthesis of PQQ in conventional media effectively increased extracellular accumulation of PQQ by 1.49-fold, which further enhanced mSLDH activity by 1.33-fold. The synergic improvement of mSLDH activity provided in this study supports the superior high dehydrogenate activity towards substrate N-2-hydroxyethyl-glucamine, 184.28 g·L -1 of 6NSL was produced after a repeated bioconversion process catalyzed by the resting cells of G. oxydans/pBB-sldAB, all of which presenting a great potential of their industrial application in 6NSL biosynthesis., (Copyright © 2019 Elsevier B.V. All rights reserved.)

(R)-3-amino-1-butanol is a key intermediate of Dolutegravir for the treatment of HIV/AIDS and its green and efficient biosynthesis has attracted a great deal of attention. Transaminases are currently used as promising biocatalyst for the synthesis of chiral amines. However, many transaminases have (S)-specificity and (R)-selective transaminases were less exploited and studied, making the production of (R)-amines remain challenging. In this study, a novel transaminase from Actinobacteria sp. (As-TA) was obtained and applied for the biosynthesis of (R)-3-amino-1-butanol by transferring the amino group from isopropylamine to 4-hydroxy-2-butanone. After optimization of the reaction condition and using a substrate fed-batch strategy, the conversion of 100, 200, 300, 400 and 500 mM 4-hydroxy-2-butanone reached 100%, 94.9%, 86.1%, 76.1% and 70.9%, respectively. (R)-3-amino-1-butanol with a maximum yield of 29.6 g/L and 99.9% e.e. value was obtained. This was the first time demonstrating the successful biosynthesis of (R)-3-amino-1-butanol with transaminase as biocatalyst and the obtained As-TA enriched the enzyme pool of transaminase with (R)-specificity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Nitrilase is the member of carbon-nitrogen hydrogen hydrolase superfamily, which has been widely used for the hydrolysis of nitriles into corresponding carboxylic acids. But most nitrilases are plagued by product inhibition in the industrial application. In this study, a "super nitrilase mutant" of nitrilase with high activity, thermostability and improved product tolerance from Acidovorax facilis ZJB09122 was characterized. Then, an efficient process was developed by employing the whole cell of recombinant E. coli for the conversion of high concentration of 1-cyanocyclohexylacetonitrile-to-1-cyanocyclohexaneacetic acid, an important intermediate of gabapentin. Under the optimized conditions, the higher substrate concentrations such as 1.3 M, 1.5 M and 1.8 M could be hydrolyzed by 13.58 g DCW/L with outstanding productivity (> 740 g/L/day). This study developed a highly efficient bioprocess for the preparation of 1-cyanocyclohexaneacetic acid which has the great potential for industrial application.

Objective: Rational engineering of the crevice-like binding site of lipases for improvement of lipases' catalytic properties., Resuts: The residues located at the crevice-like binding site of four representative lipases including Thermomyces lanuginosus lipases (TLL and Lip), Rhizopus oryzae lipase (ROL), and Rhizomucor miehei lipase (RML) were identified through structural analysis. The residues at the bottom of the crevice-like binding site recognizing the substrates with short/medium carbon chain length and those located at the right-hand wall of the surface crevice region affecting the product release were changed by site-directed mutagenesis. The corresponding double mutants exhibited ~ 5 to 14-fold higher activity towards p-nitrophenyl esters than their wild types, and their substrate preference shifted to acyl moiety with shorter carbon chain length. In addition, the mutations led to an increase of B-factor, resulting in decrease of their optimum temperature by 10-20 °C., Conclusions: The key residues located at the crevice-like binding site play important roles in determining lipase activity, substrate preference and optimum temperature, which offers a useful new paradigm for facilitating rational design of lipases.

Tyrosine phenol lyase (TPL) is a robust biocatalyst for the production of L-dihydroxyphenylalanine (L-DOPA). The improvement of TPL production is conducive to the industrial potential. In this study, the optimization of culture medium of recombinant Escherichia coli harboring TPL from Fusobacterium nucleatum (Fn-TPL) was carried out. Sucrose and combination of yeast extract and peptone were selected as carbon and nitrogen source, respectively. Their optimal concentrations were determined by Box-Behnken design and the synergistic effect between yeast extract and peptone was found to be significant, with p-value < 0.05. The DO-STAT fed-batch fermentation under optimized culture condition was established and the oxygen level was fixed at 20%. Both the biomass and Fn-TPL activity were significantly increased, which were 35.6 g dcw/L and 12292 U/L, respectively. The results obtained significantly promote the industrial production of L-DOPA production.

Iminodiacetic acid (IDA) is widely used as an intermediate in the manufacturing of chelating agents, glyphosate herbicides and surfactants. To improve activity and tolerance to the substrate for IDA production, Acidovorax facilis nitrilase was selected for further modification by the gene site saturation mutagenesis method. After screened by a two-step screening method, the best mutant (Mut-F168V/T201N/S192F/M191T/F192S) was selected. Compared to the wild-type nitrilase, Mut-F168V/T201N/S192F/M191T/F192S showed 136% improvement in specific activity. Co 2+ stimulated nitrilase activity, whereas Cu 2+ , Zn 2+ and Tween 80 showed a strong inhibitory effect. The V max and k cat of Mut-F168V/T201N/S192F/M191T/F192S were enhanced 1.23 and 1.23-fold, while the K m was decreased 1.53-fold. The yield of Mut-F168V/T201N/S192F/M191T/F192S with 453.2 mM of IDA reached 71.9% in 5 h when 630 mM iminodiacetonitrile was used as substrate. This study indicated that mutant nitrilase obtained in this study is promising in applications for the upscale production of IDAN., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The tyrosine phenol lyase (TPL) catalyzed synthesis of L-DOPA was regarded as one of the most economic route for L-DOPA synthesis. In our previous study, a novel TPL from Fusobacterium nucleatum (Fn-TPL) was exploited for efficient biosynthesis of L-DOPA. However, the catalytic efficiency decreased when the reaction system expanded from 100 mL to 1 L. As such, the bioprocess for scale-up production of L-DOPA was developed in this study. To increase the stability of substrate and product, as well as decrease the by-product formation, the optimum temperature and pH were determined to be 15 °C and pH 8.0, respectively. The initial concentration of pyrocatechol, pyruvate and ammonium acetate was fixed at 8, 5 and 77 g/L and a fed-batch approach was applied with sodium pyruvate, pyrocatechol and ammonium acetate fed in a concentration of 5, 5 and 3.5 g/L, respectively. In addition, L-DOPA crystals were exogenously added to inhibit cell encapsulation by the precipitated product. The final L-DOPA concentration reached higher than 120 g/L with pyrocatechol conversion more than 96% in a 15-L stirred tank, demonstrating the great potential of Fn-TPL for industrial production of L-DOPA.

Tyrosine phenol-lyase (TPL) catalyzes the reversible cleavage of l-tyrosine to phenol, pyruvate and ammonia. When pyrocatechol is substituted for phenol, l-dihydroxyphenylalanine (l-DOPA) is produced. The TPL-catalyzed route was regarded as the most economic process for l-DOPA production. In this study, a novel TPL from Fusobacterium nucleatum (Fn-TPL) was successfully overexpressed in Escherichia coli and screened for l-DOPA synthesis with a specific activity of 2.69Umg -1 . Fn-TPL was found to be a tetramer, and the optimal temperature and pH for α, β-elimination of l-tyrosine was 60°C and pH 8.5, respectively. The enzyme showed broad substrate specificity toward natural and synthetic l-amino acids. Kinetic analysis suggested that the k cat /K m value for l-tyrosine decomposition was much higher than that for l-DOPA decomposition, while Fn-TPL exhibited similar catalytic efficiency for synthesis of l-tyrosine and l-DOPA. With whole cells of recombinant E. coli as biocatalyst, l-DOPA yield reached 110gL -1 with a pyrocatechol conversion of 95%, which was comparable to the reported highest level. The results demonstrated the great potential of Fn-TPL for industrial production of l-DOPA., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L -1  day -1 and the space-time productivity of 143.2 mmol L -1  h -1  g -1 . The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.

2-Chloronicotinic acid (2-CA) is an important building block for a series of agrochemicals and pharmaceuticals. Amidase-catalyzed hydrolysis of 2-chloronicotinamide is one of the most attractive approaches for 2-CA production. However, development of the bioprocess was plagued by low activity of amidase for 2-chloronicotinamide. In this work, an amidase signature (AS) family amidase from Pantoea sp. (Pa-Ami), with superior activity for nicotinamide and its chlorinated derivatives, was exploited and characterized. Kinetic analysis and molecular docking clearly indicated that chlorine substitution in the pyridine ring of nicotinamide, especially the substitution at 2-position led to a dramatic decrease of Pa-Ami activity. The productivity of the bioprocess was significantly improved using fed-batch mode at low reaction temperature and 2-CA was produced as high as 370 mM with a substrate conversion of 94.2%. These results imply that Pa-Ami is potentially promising biocatalyst for industrial production of 2-CA., (Copyright © 2017 Elsevier Inc. All rights reserved.)

As the important chiral building block of levetiracetam, the synthesis of (S)-2-aminobutanamide has attracted a great deal of attention. The d-aminopeptidase catalyzed kinetic resolution of 2-aminobutanamide was demonstrated as an effective strategy for (S)-2-aminobutanamide production. In this study, a novel d-aminopeptidase from Brucella sp. (Bs-Dap) was screened and systematically characterized. The enzyme exhibited maximum activity at 45°C, pH 8.0 and it showed relatively low K m value toward 2-aminobutanamide, indicating its high affinity to the substrate. Kinetic resolution of 300g/L 2-aminobutanamide by recombinant Escherichia coli whole cells (4g/L wet cell weight) resulted in 50% conversion and >99% e.e. within 80min. The catalytic properties of Bs-Dap demonstrated its great potential for industrial production of (S)-2-aminobutanamide., (Copyright © 2017 Elsevier B.V. All rights reserved.)

L-2-aminobutyric acid (L-ABA) as a precursor for the anticonvulsant and the antituberculotic is a key intermediate in the chemical and pharmaceutical industries. Recently, leucine dehydrogenase (LeuDH) with NAD + regeneration was developed for L-ABA production on a large scale. Previously, the L-ABA yield was improved by optimizing conversion conditions, including cofactor regeneration and enzyme immobilization but not protein engineering on LeuDH due to lacking an applicable high-throughput screening (HTS) method. Recently, an HTS assay was developed by us, which enables researchers to engineer LeuDH in a relatively short period of time. Herein, a semirational engineering was performed on LeuDH to increase the catalytic efficiency of BcLeuDH. Firstly, the structure of wild-type (WT) BcLeuDH was modeled and seven potentially beneficial positions were selected for mutation. Five beneficial variants were then identified from the seven site-saturation mutagenesis (SSM) libraries by HTS and confirmed by rescreening via amino acid analyzer. The "best" variant M5 (WT + Q358N) showed 44.5-fold higher catalytic efficiency (k cat /K M ) than BcLeuDH WT, which suggested that BcLeuDH M5 is an attractive candidate for L-ABA production on a large scale. Furthermore, the structure-functional relationship was investigated based on the docking and kinetic results.

Glucose isomerase (GI) is used in vitro to convert d-glucose to d-fructose, which is capable of commercial producing high fructose corn syrup (HFCS). To manufacture HFCS at elevated temperature and reduce the cost of enriching syrups, novel refractory GIs from Thermoanaerobacterium xylanolyticum (TxGI), Thermus oshimai (ToGI), Geobacillus thermocatenulatus (GtGI) and Thermoanaerobacter siderophilus (TsGI) were screened via genome mining approach. The enzymatic characteristics research showed that ToGI had higher catalytic efficiency and superior thermostability toward d-glucose among the screened GIs. Its optimum temperature reached 95°C and could retain more than 80% of initial activity in the presence of 20mM Mn 2+ at 85°C for 48h. The K m and k cat /K m values for ToGI were 81.46mM and 21.77min -1 mM -1 , respectively. Furthermore, the maximum conversion yield of 400g/L d-glucose to d-fructose at 85°C was 52.16%. Considering its excellent high thermostability and ameliorable application performance, ToGI might be promising for realization of future industrial production of HFCS at elevated temperature., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Amidase signature (AS) family amidases are known to exhibit broad substrate specificity. According to the available genome sequence data, a novel AS family amidase, Pl-Ami, was identified and cloned from the genome of Parvibaculum lavamentivorans ZJB14001. The recombinant amidase was overexpressed in Escherichia coli BL21, purified and functionally characterized. The optimal pH and temperature for Pl-Ami were 9.5 and 45 °C, respectively. Pl-Ami preferred long chain aliphatic amides as substrates, while no activity was detected towards aromatic, heterocyclic and other amides. The highest enzyme activity of 128 U/mg was obtained when hexanoamide was used as substrate. Kinetic analysis indicated that the extension of chain length of aliphatic amides considerably decreased the K m values, and the turnover number (k cat ) was higher with long chain aliphatic amides as substrates. The obtained results provided a distinct understanding of substrate specificity of AS family amidases., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Objectives: To construct, test and exploit the CRISPRi system for enhancement of shikimic acid production with Corynebacterium glutamicum., Results: The CRISPRi system was used to regulate C. glutamicum gene expression at the transcriptional level. Hfq protein-mediated small regulatory RNAs system was compared with CRISPRi system. The more efficient CRISPRi system was used to adjust the metabolic flux involving the shikimic acid (SA) synthetic pathway. In 11 candidate genes, including transcription regulator, three targets were effective for increasing SA production. Through over-expression of ncgl1512 and down-regulating the expression of ncgl2008, ncgl2809, ncgl1856, the titers of SA increased 115 % to 7.76 g/l in 250 ml flasks and 23.8 g/l in 5 l fermentor, which is the highest shikimic acid yield reported for C. glutamicum., Conclusions: CRISPRi system was constructed and is a high-performance and time-saving method to manipulate multiple genes in C. glutamicum for shikimic acid production. Moreover, CRISPRi-system was also effective in regulating the expression of a transcription regulator.

Amidases have received increasing attention for their significant potential in the production of valuable carboxylic acids. In this study, two amidases belonging to amidase signature family (BeAmi2 and BeAmi4) were identified and mined from genomic DNA of Brevibacterium epidermidis ZJB-07021 by an efficient strategy combining comparative analysis of genomes and identification of unknown region by high-efficiency thermal asymmetric interlaced PCR (HiTAIL-PCR). The deduced amino acid sequences of BeAmi2 and BeAmi4 showed low identity (< 40%) with other reported amidases. The two amidases displayed optimum activity toward a wide spectrum of substrates at a mild alkaline pH and 45 °C. Both of them were remarkably inactivated by serine-directed inhibitor and sulfhydryl-reducing agent. Kinetic analysis revealed that nicotinamide was the preferable substrate for both amidases and the chlorine substitutions on the pyridine ring had a negative effect on activity. The bioprocesses for hydrolysis of 100 mM nicotinamide, isonicotinamide, 2-chloronicotinamide and 5-chloronicotinamide with purified BeAmi2 (6 U mL(-1)) were complete in 60 min with full conversion except 2-chloronicotinamide. These results indicated BeAmi2 was an effective catalyst for hydrolysis of several nicotinamide derivatives., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Amidases can be assigned into two families according to their amino acid sequences. Three amidases (Dt-Amis) were mined and identified from genome of Delftia tsuruhatensis. Homology analysis demonstrated that Dt-Ami 2 and Dt-Ami 6 belonged to amidase signature (AS) family, while Dt-Ami 7 belonged to nitrilase superfamily. AS amidases were shown to hydrolyze a wide spectrum of amides. Kinetic analysis demonstrated that the extension of chain length of aliphatic amides considerably decreased the Km values, and the turnover numbers (kcat) were high with linear aliphatic amides as substrates. Dt-Ami 2 showed maximum activity near a quite alkaline pH (11.0) and exhibited opposite enantioselectivity to Dt-Ami 6. Furthermore, a novel bioprocess for hydrolysis of 1-cyanocyclohexaneacetamide was developed using Dt-Ami 6 as biocatalyst, resulting in >99% conversion within 1.5h at a substrate loading of 100g/L by 0.5g/L of Escherichia coli cells. On the other hand, nitrilase superfamily amidase only hydrolyzed aliphatic amides. The Km values of Dt-Ami 7 were considerably increased with the extension of chain length of aliphatic amides. The characterized enzymes from different families showed distinct biochemical characteristics and catalytic properties, leading to a better understanding of the two super amidase family members., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Methionine as an essential amino acid has been attracting more attention for its important applications in food and feed additives. In this study, for efficient production of methionine from 2-amino-4-methylthiobutanenitrile, a codon-optimized nitrilase gene was newly synthesized and expressed, and the catalytic conditions for methionine production were studied. The optimal temperature and pH for methionine synthesis were 40 °C and 7.5, respectively. The recombinant nitrilase was thermo-stable with half-life of 5.52 h at 40 °C. The substrate loading was optimized in given amount of catalyst and fixed substrate/catalyst ratio mode to achieve higher productivity. Methionine was produced in 100 % conversion within 120 min with a substrate loading of 300 mM. The production of methionine with the immobilized resting cells in packed-bed reactor was investigated. The immobilized nitrilase exhibited good operation stability and retained over 80 % of the initial activity after operating for 100 h. After separation, the purity and the total yield of methionine reached 99.1 and 97 %, respectively. This recombinant nitrilase could be a potential candidate for application in production of methionine.

A novel halohydrin dehalogenase (HHDH), catalyzing the transformation of 1,3-dichloro-2-propanol (1,3-DCP) to epichlorohydrin (ECH), was purified from Agromyces mediolanus ZJB120203. The molecular mass of the enzyme was estimated to be 28 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). A 735-bp nucleotide fragment was obtained based on the N-terminal and internal amino acid sequences of the purified HHDH. The gene codes a protein sequence with 244 amino acid residues, and the protein sequence shows high similarity to Hhe AAD2 (HHDH from Arthrobacter sp. AD2), defined as Hhe AAm, which is the seventh reported HHDH. Expression of Hhe AAm was carried out in Escherichia coli and purification was performed by nickel-affinity chromatography. The recombinant HheAAm possessed an optimal pH of 8.5 and an optimal temperature of 50 °C and manifested a K m of 4.58 mM and a V max of 3.84 μmol/min(/)mg. The activity of Hhe AAm was not significantly affected by metal ions such as Zn(2+), Ca(2+), Cu(2+), and EDTA, but was strongly inhibited by Hg(2+) and Ag(+). In particular, the Hhe AAm exhibits an enantioselectivity for the conversion of prochiral 1,3-DCP to (S)-ECH. The applications of the Hhe AAm as a catalyst for asymmetric synthesis are promising.

Nitrilases have recently received considerable attention as the biocatalysts for stereospecific production of carboxylic acids. To improve the activity, the nitrilase from Alcaligenes faecalis was selected for further modification by the gene site saturation mutagenesis method (GSSM), based on homology modeling and previous reports about mutations. After mutagenesis, the positive mutants were selected using a convenient two-step high-throughput screening method based on product formation and pH indicator combined with the HPLC method. After three rounds of GSSM, Mut3 (Gln196Ser/Ala284Ile) with the highest activity and ability of tolerance to the substrate was selected. As compared to the wild-type A. faecalis nitrilase, Mut3 showed 154% higher specific activity. Mut3 could retain 91.6% of its residual activity after incubation at pH 6.5 for 6 h. In a fed-batch reaction with 800 mM mandelonitrile as the substrate, the cumulative production of (R)-(-)-mandelic acid after 7.5 h of conversion reached 693 mM with an enantiomeric excess of 99%, and the space-time productivity of Mut3 was 21.50-fold higher than that of wild-type nitrilase. The Km, Vmax, and k(cat) of wild-type and Mut3 for mandelonitrile were 20.64 mM, 33.74 μmol mg(-1) min(-1), 24.45 s(-1), and 9.24 mM, 47.68 μmol mg(-1) min(-1), and 34.55 s(-1), respectively. A homology modeling and molecular docking study showed that the diameter of the catalytic tunnel of Mut3 became longer and that the tunnel volume was smaller. These structural changes are proposed to improve the hydrolytic activity and pH stability of Mut3. Mut3 has the potential for industrial applications in the upscale production of (R)-(-)-mandelic acid.

In this study, several nitrilase genes from phylogenetically distinct organisms were expressed and purified in E. coli in order to study their ability to mediate the biotransformation of nitriles. We identified three nitrilases: Acidovorax facilis nitrilase (AcN); Alcaligenes fecalis nitrilase (AkN); and Rhodococcus rhodochrous nitrilase (RkN), which catalyzed iminodiacetonitrile (IDAN) to iminodiacetic acid (IDA). AcN demonstrated 8.8-fold higher activity for IDAN degradation as compared to AkN and RkN. Based on homology modeling and previously described 'hot spot' mutations, several AcN mutants were screened for improved activity. One mutant M3 (F168V/L201N/S192F) was identified, which demonstrates a 41% enhancement in the conversion as well as a 2.4-fold higher catalytic efficiency towards IDAN as compared to wild-type AcN.

To isolate enantioselective α-hydroxyacid dehydrogenases (α-HADHs), a high-throughput screening method was established. 2,4-Dinitrophenylhydrazine solution forms a red-brown complex with ketoacid produced during the α-HADH-mediated oxidation of α-hydroxyacid. The complex can be easily quantified by spectrophotometric measurement at 458 nm. The enantioselectivity of α-HADH in each strain can be measured with this colorimetric method using (R)- and (S)-α-hydroxyacid concurrently as substrates to evaluate the apparent enantioselectivity (E (app)). The E (app) closely matches the value of true enantioselectivity (E (true)) determined by HPLC analysis. With this method, a total of 34 stains harboring enantioselective α-HADHs were selected from 526 potential α-HADH-producing microorganisms. Pseudomonas aeruginosa displayed the highest (S)-enantioselective α-HADH activity. This strain appears promising for potential application in industry to produce (R)-α-hydroxyacids. The method described herein represents a useful tool for the high-throughput isolation of enantioselective α-HADHs.

5'-Nucleotides including 5'-inosinic acid have characteristic taste and important application in various foods as flavour potentiators. The selective nucleoside acid phosphatase/phosphotransferase (AP/PTase) can catalyse the synthesis of 5'-nucleotides by transfer of phosphate groups. In this study, a 747-bp gene encoding AP/PTase from Escherichia blattae was synthesised. After expression, the recombinant AP/PTase was purified using nickel-NTA. The optimal temperature and pH of this enzyme were 30°C and 5.0, respectively. The activity was partially inhibited by metal ions such as Hg(2+), Ag(+) and Cu(2+), but not by chelating reagents such as EDTA. The values of K(m) and V(max) for inosine were 40 mM and 3.5 U/mg, respectively. Using this purified enzyme, 16.83 mM of 5'-IMP was synthesised from 37 mM of inosine and the molar yield reached 45.5%. Homology modelling and docking simulation were discussed., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In this work, a mild, efficient bioconversion of 2,2-dimethylcyclopropanecarbonitrile (DMCPCN) to 2,2-dimethylcyclopropanecarboxamide (DMCPCA) in distilled water system was developed. The isolate FW815 was screened using the enrichment culture technique, displaying strong DMCPCN hydratase activity, and was identified as Rhodococcus boritolerans based on morphological, physiological, biochemical tests and 16S rRNA gene sequencing. Cultivation outcomes indicated that R. boritolerans FW815 was a neutrophile, with a growth optimum of 28-32°C; its DMCPCN hydratase belonged to the Fe-type family, and was most active at 38-42°C, pH 7.0, with maximal activity of 4.51 × 10(4) U g(-1) DCW. R. boritolerans FW815 was found to be DMCPCA amidase-negative, eliminating the contamination of dimethylcyclopropanecarboxylic acid. Moreover, it displayed high activity and acceptable reusability in the non-buffered distilled water system, comparable to those in pH 7.0 phosphate buffer (50.0 mmol l(-1)).

Nitrilases are important industrial enzymes that convert nitriles directly into the corresponding carboxylic acids. In the current work, the fragment with a length of 1068 bp that encodes the A. faecalis ZJUTB10 nitrilase was obtained. Moreover, a catalytic triad was proposed and verified by site-directed mutagenesis, and the detailed mechanism of this nitrilase was clarified. The substrate specificity study demonstrated that the A. faecalis ZJUTB10 nitrilase belongs to the family of arylacetonitrilases. The optimum pH and temperature for the purified nitrilase was 7-8 and 40 °C, respectively. Mg(2+) stimulated hydrolytic activity, whereas Cu(2+), Co(2+), Ni(2+), Ag(+), and Hg(2+) showed a strong inhibitory effect. The K(m) and v(max) for mandelonitrile were 4.74 mM and 15.85 μmol min(-1) mg(-1) protein, respectively. After 30 min reaction using the nitrilase, mandelonitrile at the concentration of 20 mM was completely hydrolyzed and the enantiomeric excess against (R)-(-)-mandelic acid was >99%. Characteristics investigation indicates that this nitrilase is promising in catalysis applications.

2-Chloronicotinic acid is receiving much attention for its effective applications as a key precursor in the synthesis of pesticides and medicines. In this study, a strain ZJB-09149 converting 2-chloro-3-cyanopyridine to 2-chloronicotinic acid was newly isolated and identified as Rhodococcus erythropolis, based on its physiological and biological tests, and 16S rDNA sequence analysis. In addition, the effects of inducer, carbon source and nitrogen source were examined. Maximum activity was achieved when the above parameters were set as 8 g/l ɛ-caprolactam, 7 g/l yeast extract and 5 g/l maltose. Moreover, the biotransformation pathway of 2-chloro-3-cyanopyridine to 2-chloronicotinic acid in strain ZJB-09149 was investigated as well. This study revealed that the nitrile hydratase (NHase) and amidase expressed in R. erythropolis ZJB-09149 are responsible for the conversion of 2-chloro-3-cyanopyridine. This is the first time to report on the biotransformation preparation of 2-chloronicotinic acid., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A soluble 3-ketovalidoxylamine A C-N lyase from Stenotrophomonas maltrophilia was purified to 367.5-fold from the crude enzyme, with a yield of 16.4% by column chromatography on High S IEX, Methyl HIC, High Q IEX, and Sephadex G 100. The molecular mass of the enzyme was estimated to be 34 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and the enzyme was a neutral protein having an isoelectric point value at pH 7.0. The optimal pH of 3-ketovalidoxylamine A C-N lyase was around 7.0. The enzyme was stable within a pH range of 7.0-10.5. The optimal temperature was found to be near 40 degrees C, and the enzyme was sensitive to heat. The enzyme was completely inhibited by ethylenediaminetetraacetic acid, and it was reversed by Ca2+. The product, p-nitroaniline, inhibited the enzyme activity significantly at low concentration. The enzyme has C-N lyase activity and C-O lyase activity, and need 3-keto groups. The apparent K (m) value for p-nitrophenyl-3-ketovalidamine was 0.14 mM.

R-Enantioselective amidases are of considerable industrial interest due to potential applications in the production of optically active compounds. Strain ZJB-05174, capable of R-enantioselective degradation of 2,2-dimethylcyclopropanecarboxamide, was isolated employing a newly established colorimetric screening method. Based on morphology, physiological tests, ATB system (ID 32 GN) and the 16S rRNA sequence, this strain was identified as Delftia tsuruhatensis. The intracellular amidase exhibited excellent thermostability and was not inhibited by urea, a known inhibitor of many amidases. The enantiomeric ratio of intracellular amidase decreased from 27 to 5 when the reaction temperature was increased from 30 to 46 degrees C. A novel temperature-dependent reversal of stereospecificity was observed when the temperature was increased to 56 degrees C. Interestingly, when the reaction was performed at 46 degrees C, cell suspensions pre-incubated at 56 degrees C exhibited the same inversion of stereospecificity.