Search

Auxetic metamaterials possess superior properties and have drawn extensive attention in the past decades. Herein, two curved ribs are added to the conventional re‐entrant (CRE) honeycomb structure to form a modified auxetic re‐entrant (MRE) honeycomb structure for improving the energy absorption capacity of the structure. In‐plane quasi‐static compression response of the honeycomb in large deformation is numerically explored first. Then, quasi‐static compression test is conducted to verify the validity of the numerical simulation. Both experimental and numerical simulation results reveal that during the quasi‐static compression process, two plateau stresses occur in the load–displacement curves of the structure, and the second plateau stress is much higher than the first one. The occurrence time of the second plateau stress can be controlled by the distance between the concave curved ribs in the structure. The experimental results are in good agreement with the finite element analysis results. Due to their desirable mechanical properties, the MRE honeycomb structures have great potential for applications in civil engineering, vehicle crashworthiness, and protective infrastructure. [ABSTRACT FROM AUTHOR]

• Innovative metamaterial design approach proposed to improve energy absorption capacity. • Varying the structural parameter (D/d) enhanced the metamaterial auxetic effect. • HPH metamaterials absorb energy effectively horizontally with their honeycomb structure. • HPH metamaterials show excellent reusability at lower compression ratios. Hexagonal perforated honeycomb (HPH) metamaterials were designed, fabricated and investigated in this work. Initially, the mechanical properties and deformation modes of various proposed HPH metamaterials (HPH-U, HPH-1 L and HPH-3 L) under quasi-static vertical compression were analyzed using experimental and finite element methods. The findings reveal significant improvements in mechanical properties and energy absorption due to the honeycomb and hierarchical expandable design. Notably, the auxetic effect is diminished. Subsequently, the impact of key dimensional parameters on the mechanical properties and Poisson's ratio behavior was explored. The results highlighted that an increase of elliptical perforation major axis to minor axis ratio enhanced the auxetic effect but compromised load-bearing and absorptive capacity. Additionally, HPH metamaterials displayed exceptional performance under quasi-static horizontal compression, with their honeycomb structure enabling them to withstand both vertical and horizontal impacts while exhibiting excellent energy absorption capabilities. The study also identified relative density as a crucial factor influencing horizontal impact performance. Finally, the study subjected the HPH metamaterials to multiple quasi-static vertical repetitive compressions, meticulously analyzing variations in mechanical properties under diverse compression ratios. Due to distinctive structural design and impressive mechanical properties, HPH metamaterials demonstrate immense potential for applications in automotive engineering and sports protection fields. [Display omitted] [ABSTRACT FROM AUTHOR]

• A novel bi-material multistable auxetic honeycomb (BMAH) with reusable and enhanced energy-absorbing phases was designed. • The crushing stress–strain curve shows three stress plateaus, and BMAH maintains a stable Poisson's ratio even at high strain levels, transitioning from near-zero to negative and then to positive. • Under the selected material combination, the second stress plateau is 8 times greater than the first, and the third stress plateau is 17 times greater than the first, significantly improving energy absorption efficiency. • A theoretical model was established to reveal the deformation mechanism of BMAH and predict the plateau stresses and strain range for each deformation stage. • Effects of geometrical parameters and crushing velocity on BMAH stress plateaus and Poisson's ratio were investigated, and a programmable guide for designing stress plateaus and specific energy absorption is presented. The ideal energy absorption structures, in addition to possessing reusability and high energy absorption efficiency, should also possess multiple desired properties to fulfill various functional applications. In this study, a bi-material multistable auxetic honeycomb (BMAH) is fabricated by using bi-material 3D printing technology. Under in-plane crushing, multiple stress plateaus can be achieved and the Poisson's ratio can be stably tuned, allowing for a transition from near-zero to negative and then to positive. The above characteristics are attributed to the specimen's multi-path deformation. The first stress plateau is only associated with recoverable elastic deformation. The second and third stress plateaus, which are 8 times and 17 times higher respectively than the first, are associated with plastic deformation, significantly enhancing energy absorption efficiency. The deformation mechanism is theoretically analyzed, and the effects of geometric parameters on the performance of BMAH are investigated. In addition, the effect of crushing velocity on the crushing behavior of the BMAH is also discussed. As the crushing velocity increases, the total number of stress plateaus transitions from three initially to two and then to one. The developed BMAH exhibits significant potential applications in multi-stage energy absorbers and smart sensors. [ABSTRACT FROM AUTHOR]

• 3D origami-inspired auxetic honeycomb with omni-directional high stiffness is proposed. • Theoretical models for predicting the elastic mechanical properties of the CFRP composite 3D honeycombs are developed. • The 3D honeycomb can be applied where good load-bearing capacity and obvious auxetic effect are simultaneously desired. • The 3D honeycomb suggests a potential for 3D isotropic auxetic design. Traditional 3D auxetic materials face significant limitations, marked by low stiffness and pronounced anisotropy. To address these challenges, here a new kind of 3D origami-inspired auxetic honeycomb with omni-directional high stiffness is proposed by us. Two simplified theoretical models based on different assumptions are developed to predict structural homogenized elastic properties along the principal axes. Combined theoretical and numerical studies are carried out to reveal the auxetic mechanism and dominated deformation characteristics of the 3D honeycomb. In order to gain a understanding of its elastic anisotropy, directional dependence of structural homogenized Young's moduli, Poisson's ratios and shear moduli are also investigated in detail. A detailed examination of the dependence of structural homogenized Young's moduli, Poisson's ratios, and shear moduli on loading direction is conducted to comprehend its elastic anisotropy. This paper introduces a feasible method for the rapid manufacturing of the 3D honeycomb using high-performance continuous carbon fiber reinforced composite (CFRP) based on hot-pressing molding. Subsequently, the compressive elastic behaviors of CFRP 3D honeycombs are characterized and evaluated through experimental tests. A comparison with traditional 3D auxetic materials reveals the 3D honeycomb's superiority in both multi-axial loading and rapid manufacturing. Additionally, the demonstrative example suggests that the 3D honeycomb can offer nearly isotropic Poisson's ratio of about −0.9. These results not only demonstrate that the 3D honeycomb is an excellent candidate for applications where both good load-bearing capacity and notable auxetic effect are simultaneously desired but also highlight its potential for 3D isotropic auxetic design. [ABSTRACT FROM AUTHOR]

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]

Auxetic structures, which have a negative Poisson's ratio, have good mechanical energy/impact absorption properties. These structures have found application in sandwich composites in the aerospace and defence industries, in the production of armour or protective sports equipment. In this study, the mechanical behaviour of the auxetic honeycomb structure in different directions (in-plane and out-of-plane) under impact loading was investigated. For the in-plane (x and y) and out-of-plane (z) directions, boxes with an auxetic honeycomb structure were produced by material extrusion method using Power ABS filament. In the experimental study, dynamic tests were carried out with a drop test machine. Besides, explicit analyses were performed by creating finite element models for these 3 directions. The experimental and numerical results have shown that the energy absorption property of auxetic honeycomb geometry is superior in the case of out-of-plane loading, in agreement with each other. In in-plane loadings, crush force efficiency (CFE) and crush forces were lower. [ABSTRACT FROM AUTHOR]

Mechanical metamaterials represent a class of deformable systems, which exhibit macroscopic deformations, mechanical, and/or thermal properties. These emerge due to the structure of their subunits rather than their materials composition and typically exhibit anomalous (normally negative) macroscopic structural, mechanical, or thermal property/properties caused by a change in shape/size of the system. Herein, a class of honeycombs is discussed, which push to the extreme the classical definition of "mechanical metamaterials," exhibiting temperature‐tunable Poisson's ratio properties. More specifically, centrosymmetric honeycombs with T‐shaped joints constructed from different materials are shown to exhibit temperature‐dependent Poisson's ratio values, which can be either positive or negative (auxetic) depending on the external stimulus the system is subjected to. The sign and magnitudes of the Poisson's ratio values are explained in terms of particular geometries that these composite honeycomb systems attain at different temperature conditions. In particular, auxeticity is attributed to the transformation of the T‐shaped units to re‐entrant units. Practical aspects on how these properties may be achieved are discussed, including the possibility that the changes in shape, and hence Poisson's ratios, are induced via different extents of dryness on opposite surfaces of ligaments made from absorbent materials. [ABSTRACT FROM AUTHOR]

• In-plane crushing responses of the tetra-chiral (TC) honeycombs were investigated by using experimental and numerical methods. • Theoretical formulas were derived to predict plateau stresses of the TC honeycomb under both quasi-static and dynamic crushes. • Effects of unit cell radius ratio on crushing strength, dynamic sensitivity index and effective Poisson's ratio (EPR) of the TC honeycomb were investigated. • Stress and EPR evolutions of the TC honeycomb with different orthogonal array ratios were also investigated. Tetra-chiral (TC) honeycombs are a type of auxetic materials showing negative Poisson's ratio (NPR), which are promising for impact energy absorption. This study aims to analyze the in-plane crushing response of the TC honeycombs under both quasi-static and dynamic loading conditions through numerical simulations and theoretical analyses. The numerical modeling techniques in LS-DYNA were validated using the quasi-static crush test data of TC honeycomb specimens obtained with a 3D-printer. Numerical simulations revealed the "Z" mode deformation and the "bulge effect" under quasi-static crushing, and the row-by-row "I" mode deformation under dynamic crushing of the TC honeycombs. By referring to the simulation results, theoretical models were derived based on the representative unit for predicting the TC honeycomb's crushing strength, i.e. plateau stress, under both quasi-static and dynamic loads. Good agreement was found between the theoretical and the numerical predictions with a maximum relative error of 7%. Parametric analyses showed that the unit cell configuration has a great effect on the crushing strength of TC honeycomb under in-plane crushing. The dynamic sensitivity index was defined to quantitatively evaluate the sensitivity of the TC honeycomb's crushing strength to the loading speed, and was found to depend on the unit cell geometry. The TC honeycomb was found to present a varied effective Poisson's ratio (EPR) with strain under both quasi-static and dynamic in-plane crushing; smaller radius ratio and lower crushing speed were found to yield more obvious NPR effect. Moreover, relative dimension of the TC honeycomb represented by the orthogonal array ratio do not affect its plateau stress under either quasi-static or dynamic crushing, while large orthogonal array ratio results in more obvious "bulge" and NPR effects under quasi-static crushing. Image, graphical abstract [ABSTRACT FROM AUTHOR]

• Two different assembled honeycomb structures were designed and studied. • The structures can be transformed by changing the length of connection plates. • The energy absorption capacity of re-entrant honeycomb was investigated. • Re-entrant honeycomb has higher energy absorption than hexagonal honeycomb. Fabricating auxetic metamaterials via an assembling process is a novel and economic method. In this work, an assembled structure that could realize the conversion of positive and negative Poisson's ratio by changing the length of the connection plates was proposed. Two different honeycomb structures of the assembled re-entrant honeycomb (ARH) and assembled hexagonal honeycomb (AHH) were designed, manufactured and studied numerically and experimentally. Dimensions of the two assembled honeycomb structures are consistent. The nominal stress–strain curves of the two assembled honeycombs have similar initial peak stresses, but the assembled re-entrant honeycomb has a higher bearing capacity and shorter stress plateau. Subsequently, the mechanical properties of ARH were studied by changing the three parameters of corrugated plates. Besides, the energy absorption and specific energy absorption of the assembled re-entrant honeycomb were investigated through the numerical method. Finally, the assembled honeycomb structure with the suitable parameter was determined. Tunable mechanical properties of the assembled auxetic structures can be obtained by varying the length of the connection plates. This strategy of assembly can reduce the costs of manufacturing and improve transportation efficiency. The proposed assembled structures are promising in civil and protective engineering. [ABSTRACT FROM AUTHOR]

• An aluminum foam filled re-entrant aluminum honeycomb structure (FRAH) is designed and investigated. • The proposed FRAH possesses higher specific energy absorption compared to the structure without filling aluminum foam. • The concept of the functional gradient (FG) is introduced into the composite re-entrant honeycombs. • 4. The FG design of the composite structure could reduce the initial peak stress and increase the platform stress value. Auxetic materials have been widely studied in recent years due to their excellent mechanical properties and special deformation modes. However, the application of auxetic materials in practical engineering is limited by the low stiffness. Therefore, in order to broaden the range of applications, it is significant to improve the stiffness of auxetic materials. In this study, the re-entrant aluminum honeycomb is combined with an aluminum foam. The mechanical properties and deformation modes of the aluminum foam filled re-entrant aluminum honeycomb are studied experimentally and numerically. In addition, the effects of the geometrical parameters of such a honeycomb are investigated. The results indicate that the stiffness and the energy absorption capacity can be effectively improved by filling the re-entrant honeycomb with aluminum foam. Due to the high compressibility of aluminum foam, the structure can still retain the auxetic effect at a large strain. In addition, the concept of the functional gradient is introduced into the field of composite re-entrant honeycomb, and the influence of angle gradient and thickness gradient on the structure is analyzed. The results show that the composite structure with the designed functional gradient outperforms the uniform composite structure in terms of initial peak stress and the stress value at the platform stage. Due to its superior performance, the proposed auxetic composite structures hold promising applications in the fields of vehicle engineering, protective engineering and aerospace engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

This paper presents a finite-element analysis of honeycomb and re-entrant honeycomb structures made of a two-phase composite material which is optimized with respect to selected parameters. It is shown that some distributions of each phase in the composite material result in the counter-intuitive mechanical behaviour of the structures. In particular, negative values of effective Poisson's ratio, i.e., effective auxeticity, can be obtained for a hexagonal honeycomb, whereas re-entrant geometry can be characterized by positive values. Topology optimization by means of the method of moving asymptotes (MMA) and solid isotropic material with penalization (SIMP) was used to determine the material's distributions. [ABSTRACT FROM AUTHOR]

• Metallic graded RECH prototypes fabricated through a low-cost step-by-step method. • Graded RECH takes advantage of structural hierarchy and functional gradient. • Gradient design causes multi-step deformation mode and multi-plateau stress. • Improved SEA and auxeticity of graded RECH under different crushing velocities. As lightweight energy-absorbing materials, auxetic honeycombs have demonstrated promising applications in engineering fields. In this study, the graded re-entrant circular auxetic honeycombs (RECH) were proposed, and their metallic prototypes were fabricated through a low-cost step-by-step method. The novel design of graded RECH takes advantage of structural hierarchy on the meso-scale and functional gradient on the macro-scale. The in-plane crushing behaviors of uniform (U) RECH, positive gradient (PG) RECH and negative gradient (NG) RECH with the same relative density were investigated under different crushing velocities. The finite element (FE) models were validated by comparing against the experimental and theoretical results. The results showed that the gradient design can control the multi-step deformation modes of RECH, which leads to the multi-plateau characteristics and reduced initial stress peaks in stress-strain curves. Under quasi-static crushing, the specific energy absorption (SEA) of PG-RECH is higher by 43.9% than that of U-RECH owing to more plastic deformations of hierarchical circular walls at a large strain. Under dynamic impacts, the SEA of NG-RECH is 2.7 times and 1.5 times those of PG-RECH and U-RECH at a small strain, respectively. Finally, the NG-RECH shows more negative Poisson's ratio (NPR) behavior than the U-RECH under dynamic crushing. This study offers new routes to the fabrication and design of auxetic metamaterials. [Display omitted] [ABSTRACT FROM AUTHOR]

In the present work, a new design of honeycomb is proposed by embedding the rhombic configuration into the normal re-entrant hexagonal honeycomb (NRHH), in order to enhance the honeycomb’s in-plane mechanical properties. Both theoretical analysis and numerical simulations are employed to calculate the in-plane mechanical properties of the new honeycomb under uniaxial compression, including Young’s modulus, Poisson’s ratio and critical buckling strength. The results show that the new honeycomb can maintain auxetic performance, while both the in-plane Young’s modulus and the critical buckling strength are significantly improved compared to the NRHH. Comparisons between the present design and other exiting enhanced periodic topologies are also carried out. With respect to them, the present design features superior performances. For these outstanding properties, this layout may provide a new concept for the optimization and design of auxetic materials. [ABSTRACT FROM AUTHOR]

[Display omitted] • An assembled auxetic chiral honeycomb (AACH) is designed and manufactured by 3D printing. • The AACH could exhibit lower peak force and high stress plateau. • The external energy is mainly absorbed by the vertical wave plate. • The AACH provides a new idea for the industrial manufacturing of auxetics. Auxetic metamaterials tend to be fabricated using additive manufacturing and laser cutting due to their special porous microstructures. Although the auxetic metamaterials have many applications currently, the high cost and the low efficiency of available manufacturing are adverse to expend their application range. In this work, the auxetic chiral honeycomb is assembled crosswise using the slotted wave plate. Effects of wave radius, plate thickness, slot percentage, and base material on the Poisson's ratio and mechanical performance are explored experimentally and numerically. The results show that assembled auxetic chiral honeycomb (AACH) exhibits lower peak force and high plateau stress than the conventional assembled one. With the increase of wave radius and plate thickness, the energy absorption (EA) and specific energy absorption (SEA) would increase. As for the different material combinations, when the base materials in vertical and horizontal wave plates adopt stainless steel and aluminum, respectively, the AACH would exhibit desirable EA, SEA, and auxetic behavior. These findings provide a new approach to the manufacture of auxetics at a low cost, which is beneficial for potential applications. [ABSTRACT FROM AUTHOR]

• A simple re-entrant auxetic metamaterial is designed by rotating and connecting 2D re-entrant honeycomb cells. • The energy absorption of the proposed metamaterial is discussed under different design parameters. • The proposed 3D re-entrant auxetic lattice has desirable stiffness and specific energy absorption. • The initial peak stress and energy absorption capacity of the metamaterial can be adjusted via changing design parameters. As a branch of auxetics, the re-entrant hexagonal honeycomb has many superior mechanical performances. However, most research focused on two-dimensional (2D) re-entrant structures or three-dimensional (3D) structures without high compressibility. The energy absorption capacity of such structures is deficient for practical applications. Therefore, it is important to investigate the 3D re-entrant honeycomb structures which can sustain large deformation in order to make the most use of the materials. In this work, a simple 3D re-entrant unit cell is designed, manufactured and examined. The influence of geometric parameters on the deformation mode and energy absorption capacity is investigated numerically. The experimental results are in good agreement with the finite element prediction. The proposed 3D re-entrant auxetic metamaterial not only possesses a greater bearing capacity but also presents a stable compression deformation. The structure exhibits a desirable energy absorption behavior, including obvious auxetic behavior and a long stress plateau. By adjusting the geometrical parameters of the structure, the performances of energy absorption and compression stiffness can be improved. These findings provide a new idea to design 3D auxetic metamaterials and promote their utilization in protective structures. [Display omitted] [ABSTRACT FROM AUTHOR]

Double arrowed honeycomb (DAH) is a typical auxetic material with negative Poisson's ratio (NPR) and excellent mechanical properties, showing a wide application prospect in aerospace, marine, automotive and other fields. In this work, we introduce the double circular arc walls into the regular DAH unit cell to improve the strength and energy absorption capability of the material. According to the position of the arc wall, three circular double arrowed honeycomb (CDAH) unit configurations were proposed, including upper-circular (U-type), lower-circular (L-type), and full-circular (F-type). The prototype specimens of DAH and CDAHs were fabricated by 3D printing and tested under quasi-static crushing. The finite element (FE) models of the specimens were established and validated by the experimental results. The experimental and numerical results showed that the three types of CDAHs have higher crushing stress, crush force efficiency (CFE) and specific energy absorption (SEA) than the DAH with the same geometric parameters, which is due to the formation of more plastic hinges at the joints and the middle of the arc walls. Specifically, the CFE of L-type CDAH is 25.8% higher than that of DAH, and the SEA of F-type CDAH is 85.9% higher than that of DAH. The detailed parameter analyses of CDAH revealed that small short inclined wall angle and lower circular arc radius, and large friction coefficient value, long inclined wall angle and cell wall thickness all lead to large SEA. Among the three types of CDAH, the U-type has the greatest SEA and the most NPR effect under the same relative density. Finally, a wide range of SEA and Poisson's ratio of the CDAH can be obtained by rationally designing the arc wall position and the geometric parameters of the unit cell. [Display omitted] • Quasi-static crushing behaviors of three novel types of circular double arrowed honeycombs (CDAHs) through experimental tests and numerical simulations. • More Energy absorption than regular double arrowed honeycomb (DAH) due to formation of more plastic hinges of arc walls. • Good agreement between experimental and numerical results in terms of deformation mode, crushing stress and specific energy absorption (SEA). • Effects of cell number, geometric parameter and relative density on crushing responses of CDAHs. [ABSTRACT FROM AUTHOR]

In the present work, two new designs of honeycomb structures were presented based on the basic re-entrant structure namely, splined-reentrant and stiffened-reentrant honeycombs. The new structures were designed in order to enhance the in-plane stiffness and maintaining the auxetic behavior of the structure. In this study, finite elements modeling and experimental work were carried out to evaluate the in-plane properties of the new designs. The effect of the geometrical parameters such as rib length and rib thickness of the unit cell of the new designs on the in-plane properties was investigated. Finite elements results showed that the in-plane stiffness of the new designs was improved significantly compared to the basic re-entrant structure. Also, the stiffened-reentrant structure showed better enhancement of the stiffness than the splined-reentrant structure. For example the modulus of elasticity of the stiffened-reentrant structure exceeds 16× that of the basic re-entrant structure in x-direction and was over two times in the y-direction with lower values of the negative Poisson's ratio. Compression tests were carried on honeycomb samples made of steel using laser cutting technique with different geometrical parameters. Test results for the three designs were compared with the finite element results and they were in a good agreement. [ABSTRACT FROM AUTHOR]

• A novel composite is proposed by filling layered re-entrant honeycombs with concrete. • The mechanical properties and failure modes of two types of specimens under uniaxial compression are investigated. • The proposed auxetic composite exhibits an enhanced stiffness and shear resistance. • The effects of cell angle and cell wall thickness on the mechanical properties are investigated. Auxetic materials exhibit desirable mechanical properties, e.g., fracture resistance, shear resistance and energy dissipation due to their unique deformation characteristics. Honeycomb sandwich structures also have superior properties, e.g., energy absorption performance and low density. These desirable characteristics enable them as promising alternatives for building construction to meet the modern construction requirement which a higher safety standard is needed. In this study, a novel concrete composite with auxetic layered honeycomb was designed, manufactured and investigated for exploring the load-bearing performance of auxetic metamaterials under quasi-static compression. The layered honeycomb sandwich structure was analyzed by quasi-static compression test and its energy absorption performance was evaluated. Numerical models, validated by experimental results, were employed in parametric studies to further examine their performance. The results show that the layered structure has higher initial peak stress and stable platform stress. Moreover, it could improve the shear resistance and overall stability of the structure. These findings are beneficial to the applications of auxetic metamaterials in building construction. [ABSTRACT FROM AUTHOR]

A novel class of two-dimensional auxetic structures based on the pentagon motif is proposed. Their mechanical properties are investigated by combining molecular mechanics simulations with a simple three-parameter mechanical model which assumes perfectly elastic behavior. It is predicted that the proposed structures – termed as double re-entrant honeycomb – may possess unique mechanical characteristics, which include complete and perfect auxeticity, as well as the negative Poisson's ratio observed in both the tensile and compressive regimes. The behavior of the considered structures is explained in relation to well-known auxetic models. It is shown that the considered structures simultaneously implement three different mechanisms leading to a negative Poisson's ratio: the opening of the re-entrant units, the rotation of the squares, and the flattening effect. [Display omitted] • A novel class of 2D auxetic structures composed of pentagons is proposed. • The proposed structures combine two overlapping re-entrant honeycomb structures. • Simultaneous implementation of three different auxetic mechanisms is possible. • The proposed structures offer unique properties: complete and perfect auxeticity. [ABSTRACT FROM AUTHOR]

Abstract: Systems with a negative Poisson’s ratio (auxetic) exhibit the unusual yet very useful property of getting wider rather than thinner when uniaxially stretched. A novel mechanism to generate auxetic behaviour at tailor-made values which may be implemented in composites manufacture using readily available materials is proposed. FEA simulations are used to provide a proof of principle for this concept and an analytical model is proposed so as to elucidate the requirements for auxetic behaviour. It is shown that the simulations and analytical model give comparable results and confirm that this system may reach giant negative values of the Poisson’s ratio. [Copyright &y& Elsevier]

Nowadays, sandwich plates with cellular core structures are gaining the attention of researchers owing to their outstanding features. For a better insight into auxetic structures, in this study, we propose an excellent computational approach based on polygonal meshes to comprehensively examine the free vibration, buckling and dynamic instability behaviors of the auxetic honeycomb sandwich plate structures. A generalized C 0 -type higher-order shear deformation theory ( C 0 -HSDT) in conjunction with both Laplace and quadratic serendipity shape functions is employed to approximate the strain fields for polygonal plate elements. The sandwich plate structures are constituted by an auxetic honeycomb core layer with negative Poisson's ratio and two skin layers reinforced by graphene nanoplatelets (GNPs). Ultra-light features of the plate structures can be obtained by using the auxetic honeycomb cells with negative Poisson's ratio while the GNPs are embedded into skin layers to enhance the structural stiffness. In order to determine the dynamic instability region of the sandwich plate, Bolotin's approach is utilized in the current research. Several numerical examples are carried out to investigate the influences of geometrical parameters of auxetic cell and GNPs reinforcement on the structural behaviors. The results obtained in the current research can be considered as benchmark ones to investigate auxetic sandwich plate structures. [ABSTRACT FROM AUTHOR]

This paper presents a stiffening method by which new inclined walls are added to the classical re-entrant honeycomb cell. This modification boosts the in-plane rigidity of the re-entrant cell without significant loss from auxetic behaviour. This study focuses on the in-plane elasticity moduli and negative Poisson's ratios along the principal axes. Analytical expressions that calculate the elasticity moduli and negative Poisson's ratios are derived; both finite element modelling and experiments reported in the literature validate the expressions of this work. Further, the variation in the in-plane elastic properties of the core cell is examined by altering the new wall's geometric, sectional, and material parameters. The results from the analytical expressions and the finite element models match very closely and demonstrate the boosted rigidity of the cell proposed in this work. This work also provides a benchmark of the new cell against the classical cell that can be used to tailor the in-plane elasticity moduli and negative Poisson's ratios to suit the needs of different applications. • Enhancement stiffness of re-entrant honeycomb core cell. • Advanced tunable mechanical properties by new derived analytical expressions. • A benchmark of analytical, numerical and experimental results. [ABSTRACT FROM AUTHOR]

• The analytical dynamic model of an auxetic honeycomb sandwich plate is constructed. • Compare the auxetic honeycombs and honeycombs with positive Poisson's ratio on impact resistance and energy absorption. • Explore the change of geometric parameters of honeycomb core cell result in change of Poisson's ratio and then result in change of the responses of the plate. • Five kinds of different impact loads are considered and the effect of different loads on the plate are compared. In this paper, we study the nonlinear transient responses of an auxetic (negative Poisson's ratio) honeycomb sandwich plate under impact dynamic loads. The partial differential equations of the honeycomb sandwich plate based on Reddy's higher shear deformation theory and Hamilton's principle are obtained. The nonlinear ordinary differential equations are then derived by Galerkin truncation method. The dynamic responses of the honeycomb sandwich plate subjected to different loads, such as step loading, air-blast loading, sinusoidal loading, triangular loading and incremental loading, respectively, have been investigated. The contributions of total thickness, core thickness ratio, Poisson's ratio, cell inclination angle and blast types to transient responses of the plate are discussed in detail by numerical simulations. The effect of geometrical parameters on the dynamics of the plate and the effect of different blast loads on the plate are obtained. It is found that the honeycomb sandwich plate with negative Poisson's ratio would be a better choice compared with the positive one for some structures under dynamic loads. [ABSTRACT FROM AUTHOR]