Search

Nanostructured thin film coatings of copper oxide (Cu-oxide) were investigated to determine their physical structure, surface morphology, surface electronic bonding states, and optical properties. The Cu-oxide had been coated onto reflective aluminum substrates via a facile one-step sol–gel dip-coating route using a copper nitrate precursor. Characterizations were conducted using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), and ultra-violet visible (UV–Vis) spectroscopic methods, and representative sol-gel reactions using copper nitrate precursor were proposed. The XPS spectra confirmed the presence of copper oxide elements. Further exploration of the Cu2 p 3/2 peak in XPS spectra revealed that the electronic structure of the copper component consisted of tetrahedral Cu(I) and octahedral Cu(II) with the presence of octahedral Cu(II) enabling coatings to have high absorption levels across the solar spectrum. The deconvolution of the O1 s spectra exhibited three curve-fitting components: the lattice O2−, surface oxygen, and subsurface O− species. FESEM results showed that the coating surface was an agglomerated copper oxide nanoparticles structure forming a porous structure. The optical band-gap of Cu-oxide thin film coatings, via the Tauc plot, was 2.7 eV. [ABSTRACT FROM AUTHOR]

Abstract This article presents a comprehensive study on surface chemical bonding states, morphological features, mechanical properties, finite element modeling, and water contact angle measurements of wet chemical based dip-coated CoZn-oxide thin film coatings. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Nanoindentation, finite element method (FEM) modeling, and drop shape analysis techniques were used to carry out the detailed measurements. AFM studies showed that the surface roughness values of all the coatings sturdily increased with the increase in sol concentrations. The gradual increase in sol concentrations and annealing temperature also had a remarkable influence over the Co , and Zn-contents of these coatings given by XPS analysis. The deconvolution of Co 2 p 3/2 photoelectron lines revealed the formation of Co(OH) 2 , CoO, Co 2 O 3 , and Co 3 O 4 phases from the coatings surface while low intensity satellite peaks developed due to a partial spinel lattice structure of Co-ions. The occurrence of Co 3 O 4 , CoO, and ZnO phases were also confirmed from the deconvolution of O 1 s photoelectron lines. The elastic modulus, E , of CoZn-oxide thin film coating, varied within the range of 43.7–69.2 GPa was comparable with that in CoCuO thin film coatings. The maximum stress level induced was estimated to be in the range of 4.0–6.5 GPa. However, as the thickness of the coatings is increased, the maximum stress level slightly decreased. The coatings were moderately hydrophobic. [ABSTRACT FROM AUTHOR]