Search

Protein polymer hybrids play an increasingly important role in therapeutics and biocatalysis. Synthesis of these biohybrids can be achieved by either the grafting-from or grafting-to strategy and are generally thought to be interchangeable. Therefore, when choosing between these two strategies the decision is usually based on polymer accessibility and purification preference. However, in this study, we demonstrated that the choice of the polymer ligation strategy played a significant role in the stability and bioactivity of the final hybrid. Our goal was to prepare a thermally stable DNase I polymer hybrid by utilizing either synthetic strategies. We found that the grafting-from strategy using reversible addition-fragmentation chain transfer polymerization (RAFT) or atom transfer radical polymerization (ATRP) yielded DNase I biohybrids with no activity. Control reactions were used to demonstrate inherent protein deactivation caused by the grafting-from conditions for either ATRP or RAFT polymerization. The grafting-to method yielded active and thermally stable DNase I biohybrids.

Protein–polymer hybrids are used in a variety of fields including catalysis, detection, and therapeutics. The grafting-from method for the synthesis of these biohybrids has gained popularity due to the ease of synthesis and purification. In this method, an initiator or chain transfer agent (CTA) is ligated onto an amino acid residue, typically lysine or cysteine, and polymers are subsequently grown in situ. In this manuscript, we report the preparation of protein polymer hybrids by grafting-from a previously overlooked acidic amino acid residue (glutamic and aspartic acid) and compare our results to protein polymer hybrids, grafted from the traditional lysine residue. Herein, we conjugated an atom transfer radical polymerization (ATRP) initiator to acidic amino acid residues and lysine residues and grew polymers from Thermomyces lanuginosa lipase (TL). N-[3-(N,N-Dimethylamino)propyl] acrylamide was grafted from the TL initiator, and the enzymatic activity of protein polymer hybrids was compared. We found that the acidic residues are easily modified with multiple ATRP initiators and polymers are readily grown. Additionally, the hybrids grafted from acidic residues demonstrated a 50% increase in enzyme activity compared to those grafted from lysine residues. Moreover, the activity was higher than that of native lipase TL in both cases. The polymers that were grafted-from the acid residues tended to provide the hybrids with a higher activity at elevated temperatures. These results point to a new amino acid ligation strategy for preparing protein polymer hybrids via a grafting-from method.

The targeted delivery of polymers to neurons is a challenging yet important goal for polymer based drug delivery. We prepared a fentanyl based atom transfer radical polymerization (ATRP) initiator to target the Mu opioid receptor (MOR) for neuronal targeting. We incorporated our recently discovered rigid acrylate linking group into the initiator to retain a high degree of binding to the MOR and grafted random or block copolymers of poly(oligo(ethylene oxide) methacrylate)-block-(glycidyl methacrylate). Trifluoroethanol promoted amine ring opening of the glycidyl methacrylate was used for post-polymerization modification of the fentanyl initiated polymers to attach a near-infrared fluorescent dye (ADS790WS) or to build a targeted siRNA delivery system via modification with secondary amines. We examined the biocompatibility, cellular internalization, and siRNA binding properties of our polymer library in a green fluorescent protein expressing SY SH5Y neuroblastoma cell-line.

The synthesis of a sulfoxide-based water-soluble polymer, poly(2-(methylsulfinyl)ethyl acrylate) (polyMSEA), a polymeric analogue of DMSO, by atom transfer radical polymerization (ATRP) is reported. Well-defined linear polymers were synthesized using relatively low amounts of copper catalyst (1000 or 100 ppm). Two types of star polymers were synthesized by either an “arm-first” approach or a “core-first” approach using a biodegradable β-cyclodextrin core. The glass transition temperatures of both the linear polymer (16 °C) and star polymer (32 °C) were determined by differential scanning calorimetry (DSC). The lower critical solution temperature (LCST) of poly(MSEA) was estimated to be ca. 140 °C by extrapolating the LCST of a series of copolymers with NIPAM. Cytotoxicity tests revealed that both the linear and star polymers have low toxicity, even at concentrations up to 3 mg/mL.

Aqueous initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) was applied to graft well defined acrylamide, N,N-dimethylacrylamide and N-vinylimidazole homo and block copolymers from a model protein initiator (bovine serum albumin (BSA)) under bio-relevant conditions. Using N-vinylimidazole as a ligand catalytic biohybrid nanoparticles were prepared by loading palladium into a block copolymer of poly(N-vinylimidazole)-b-poly(oligo(ethylene oxide) acrylate) grafted from BSA. The protein–polymer biohybrid catalyst successfully catalyzes Suzuki–Miyaura couplings in aqueous media under aerobic conditions.

Titanium (Ti) and its alloys are used in orthopedic and dental implants due to their excellent physical properties and biocompatibility. Although Ti exhibits superior osteoconductive properties compared to those of polymer-based implants, improved bone-on growth properties are required for enhanced surgical outcomes and improved recovery surgical interventions. Herein, we demonstrate a novel surface modification strategy to enhance the osteoconductivity of Ti surfaces through the grafting-from procedure of a reactive copolymer via surface-initiated atom transfer radical polymerization (SI-ATRP). Then, postpolymerization conjugation of the P15 peptide, an osteoblast binding motif, was successfully carried out. Subsequent in vitro studies revealed that the surface modification promoted osteoblast attachment on the Ti discs at 6 and 24 h. Moreover, mineral matrix deposition by osteoblasts was greater for the surface-modified Ti than for plain Ti and P15 randomly absorbed onto the Ti surface. These results suggest that the strategy for postpolymerization incorporation of P15 onto a Ti surface with a polymer interface may provide improved osseointegration outcomes, leading to enhanced quality of life for patients.

Cationic hyperbranched polymers (HBP) were prepared by self-condensing vinyl polymerization of an atom transfer radical polymerization (ATRP) inimer containing a quaternary ammonium group. Two types of biocompatible shells, poly(oligoethylene glycol) methacrylate (polyOEGMA) and poly(2-(methylsulfinyl) ethyl methacrylate) (polyDMSO), were grafted respectively from HBP core to form core-shell structures with low molecular weight dispersity and high biocompatibility, polyOEGMA-HBP and polyDMSO-HBP. Both of the structures showed low cytotoxicity and good siRNA complexing ability. The efficacy of gene silencing against Runt-related transcription factor 2 ( Runx2) expression and the long-term assessment of mineralized nodule formation in osteoblast cultures were evaluated. The biocompatible core-shell structures were crucial to minimizing undesired cytotoxicity and nonspecific gene suppression. polyDMSO-HBP showed higher efficacy of forming polyplexes than polyOEGMA-HBP due to shell with lower steric hindrance. Overall, the gene silencing efficiency of both core-shell structures was comparable to commercial agent Lipofectamine, indicating long-term potential for gene silencing to treat heterotopic ossification (HO).

Post-polymerization modification of polymer chain-ends is a powerful tool for the preparation of functional materials. “Click” type reactions represent the most prevalent post-polymerization strategies. We applied the recently described sulfur(VI) fluoride exchange reaction to functionalize the chain-ends of four polymers prepared using activators generated by electron transfer atom transfer radical polymerization. Aryl-TBDMS terminated polymers were reacted with aryl sulfurofluoridate compounds with a near quantitative conversion. This research represents the application of a new click type reaction to prepare functional polymers.

The field of RNA interference depends on the development of safe and efficient carriers for short interfering ribonucleic acid (siRNA) delivery. Conventional cationic monomers for siRNA delivery have utilized the nitrogen heteroatom to produce cationic charges. Here, we polymerized cationic sulfonium (meth)acrylate by activators regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) to form polymers with narrow molecular weight distributions for siRNA delivery. The tertiary sulfonium species was stable toward dealkylation in water but less stable in the polar aprotic solvent dimethyl sulfoxide. Block copolymers poly(ethylene oxide) with poly(meth)acrylate containing sulfonium moieties were prepared as an siRNA delivery platform. Results suggested block copolymers were biocompatible up to 50 μg/mL in vitro and formed polyplexes with siRNA. Additionally, block copolymers protected siRNAs against endonuclease digestion and facilitated knockdown of glyceraldehyde 3-phosphate dehydrogenase (Gapdh) mRNA expression in murine calvarial preosteoblasts. The versatility, biocompatibility, and cationic nature of these tertiary sulfonium groups are expected to find widespread biological applications.

Phototunable supersoft elastomers were prepared by photo-cross-linking molecular bottlebrushes with poly(n-butyl acrylate) (PBA) side chains. Bottlebrushes were synthesized by atom transfer radical polymerization (ATRP) and Br-chain end functionalities were replaced by photo-cross-linkable coumarin units. Photo-cross-linking and photoscission of molecular bottlebrushes resulted in tunable elastomeric behavior quantified by dynamic mechanical analysis. The cell–substrate interactions, tuned by UV-light, depended on surface morphology and softness that could be as low as several kilopascals.

Covalent attachment of poly(ionic liquid)s (PILs) by click chemistry on glass or silicon (Si) surfaces was performed. Poly[1-(4-vinylbenzyl)-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] (polyVBBI+Tf2N−), and copolymers of polyVBBI+Tf2N− with fluorescein O-methacrylate were synthesized by conducting an atom transfer radical polymerization (ATRP) from initiators containing azide or thioacetate groups. The azide- and thiol-terminated PILs were then successfully grafted onto alkyne and alkene modified glass/Si wafers by thermal azide–alkyne cycloaddition and photoinitiated thiol-ene click reactions, respectively. The modified surfaces were characterized by contact angle measurements and ellipsometry. The fluorescent PIL functionalized surfaces showed strong fluorescence under UV irradiation. This procedure of tethering PILs to substrates also provides an easy way to change the surface hydrophilicity by replacing the anions in the grafted PILs. The present approach could be readily applied for surface modifications with other types of PILs or their copolymers to achieve different functionalities on various surfaces.

Activators regeneration by electron transfer atom transfer radical polymerization (ARGET ATRP) of 2-aminoethyl methacrylate hydrochloride (AMA) was successfully performed for the first time. The polymerizations were conducted at 35 °C in isopropanol (IPA)/water mixtures or pure water, using CuBr2/TPMA (TPMA: tris(2-pyridylmethyl)amine) as a metal catalyst complex with slow feeding of ascorbic acid (AscA) to allow regeneration of the activator species. The reactions showed first-order kinetics with monomer conversion and high monomer conversion (>90%), and controlled polymers (Đ ≈ 1.3) were obtained using optimized conditions. For the first time, as a result of the PAMA’s high chain-end functionality, it was possible to extend the polymer and synthesize a well-defined block copolymer (PAMA-b-POEOMA) (OEOMA: oligo(ethylene oxide) methyl ether methacrylate) by ATRP techniques, using AMA as the first block. PAMA-based nanogels, with potential biomedical applications, were prepared by ARGET ATRP in inverse min...

The combination of polymers with nucleic acids leads to materials with significantly advanced properties. To obviate the necessity and complexity of conjugating two macromolecules, a polymer initiator is described that can be directly covalently linked to DNA during solid-phase synthesis. Polymer can then be grown from the DNA bound initiator, both in solution after the DNA-initiator is released from the solid support as well as directly on the solid support, simplifying purification. The resulting polymer-DNA hybrids were examined by chromatography and fluorescence methods that attested to the integrity of hybrids and the DNA. The ability to use DNA-based supports expands the range of readily available molecules that can be used with the initiator, as exemplified by direct synthesis of a biotin polymer hybrid on solid-support. This method expands the accessibility and range of advanced polymer biohybrid materials.

Supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of the cationic monomer (3-acrylamidopropyl)trimethylammonium chloride (AMPTMA) was successfully performed for the first time. The polymerizations were performed in water or ethanol–water mixtures at room temperature in the presence of Cu(0), using relatively low concentrations of soluble copper catalyst and an excess of ligand (Me6TREN). The reaction conditions were optimized to give the best control over the polymerization under environmentally friendly conditions. The polymerization data showed good control over the molecular weights with narrow molecular weight distributions for the entire polymerization. The preservation of the chain-end functionality was confirmed by self-chain extension and the synthesis of a block copolymer containing AMPTMA and oligo(ethylene oxide) methyl ether acrylate (OEOA). SARA ATRP was also extended to the synthesis of alkyne-terminated poly-AMPTMA (PAMPTMA), which was subsequently functionalized, using copper(I) catalyzed azide–alkyne cycloaddition, with an azido-functionalized coumarin derivative.

Protein–polymer hybrids are an important class of biomaterials. Described is the preparation of a genetically incorporated a non-canonical amino acid (nCAA) containing an ester linked atom transfer radical polymerization (ATRP) initiator, followed by a controlled “grafting from” polymerization. A Methanococcus jannaschii tyrosyl-tRNA synthetase/tRNA CUA pair was selected to genetically encode p-bromoisobutyryloxymethyl- l -phenylalanine (biF) in response to an amber codon. This biF was directly incorporated into green fluorescent protein (GFP) at residue 134 generating biF-GFP. Activators regenerated by electron transfer (ARGET) ATRP was conducted under biologically relevant conditions to graft well-defined poly(oligo ethylene oxide methacrylate) from the biF-GFP. The biF-GFP retained its biofluorescence properties throughout the polymerization indicating the utility of ARGET ATRP for preparing protein–polymer hybrids. The presence of a base-labile ester bond in the initiator, allowed cleavage of the grafted polymer from the protein and directly analyze their molecular weight and molecular weight distribution using gel permeation chromatography (GPC). The cleaved final polymer had a M n = 27,000 and a molecular weight distribution of M w / M n = 1.27.

Activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) was successfully implemented in aqueous media for the first time. A well-controlled polymerization of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) was conducted with 300 ppm or lower of a copper catalyst and tris(2-pyridylmethyl)amine (TPMA) ligand in the presence of an excess of halide salts. Ascorbic acid was continuously fed into the reaction mixture to regenerate the activator complex. The effects of the halide salt concentration, ligand concentration, feeding rate of the reducing agent, and copper concentration were systematically studied to identify conditions that provide both an acceptable rate of polymerization and good control over the polymer properties. The optimized polymerization conditions provided linear first-order kinetics, linear evolution of the molecular weight with conversion, and polymers with narrow molecular weight distributions (Mw/Mn < 1.3) at high monomer conversions (∼70%) ...

Initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) with ppm amount of Cu catalyst was successfully developed in water. For the first time, Cu catalyst concentrations of 100 ppm and lower were used in aqueous media to prepare well-defined macromolecules. Polymers of oligo(ethylene oxide) methyl ether acrylate were synthesized with low dispersity (Mw/Mn = 1.15–1.28) using 20–100 ppm of an active CuBr/tris(pyridin-2-ylmethyl)amine-based catalyst in the presence of excess bromide anions. This technique was used to synthesize a thermoresponsive block copolymer of poly(oligo(ethylene oxide) methyl ether methacrylate)-b-poly(oligo(ethylene oxide) methyl ether acrylate). The methacrylic block had a lower critical solution temperature (LCST = 77 ± 2 °C) below that of the acrylic block. The hydrodynamic diameter of ca. 10 nm at temperatures below the LCST is consistent with free polymer chains in solution, and the diameter of ca. 30 nm above the LCST is consistent with...

Atom transfer radical polymerization (ATRP) methods were developed in water-based media, to grow polymers from proteins under biologically relevant conditions. These conditions gave good control over the resulting polymers, while still preserving the protein’s native structure. Several reaction parameters, such as ligand structure, halide species, and initiation mode were optimized in water and PBS buffer to yield well-defined polymers grown from bovine serum albumin (BSA), functionalized with cleavable ATRP initiators (I). The CuCl complex with ligand 2,2′-bipyridyne (bpy) provides the best conditions for the polymerization of oligo(ethylene oxide) methacrylate (OEOMA) in water at 30 °C under normal ATRP conditions (I/CuCl/CuCl2/bpy = 1/1/9/22), while the CuBr/bpy complex gave better performance in PBS. Activators generated by electron transfer (AGET) ATRP gave well-controlled polymerization of OEOMA at 30 °C with the ligand tris(2-pyridylmethyl)amine (TPMA), (I/CuBr2/TPMA = 1/10/11). The AGET ATRP react...

Fluorescein O-methacrylate was copolymerized with n-butyl acrylate by atom transfer radical polymerization in a “grafting from” reaction with a multifunctional linear macroinitiator to form pH responsive fluorescent bottlebrushes. The brush-like structure of the synthesized macromolecules was confirmed through molecular imaging by atomic force microscopy. NMR spectroscopy showed that the fluorescent units were successfully incorporated into the polymer. The synthesized bottlebrushes displayed highly fluorescent properties under basic conditions, yet showed no fluorescence under neutral or acidic conditions. The fluorescence could be turned on and off by changing the pH of the solution. These bottlebrush molecules could have potential applications in molecular imaging.

Azide-terminated poly(tert-butyl acrylate) was synthesized via atom transfer radical polymerization (ATRP). Subsequent deprotection was performed to yield poly(acrylic acid) (PAA) possessing a reactive chain-end. A one-pot sequential amidation of the PAA with the amine derivatives of a near-infrared fluorescent dye (ADS832WS) and glucose produced NIRF dye-incorporated water-soluble copolymers. End-group modifications were performed to produce alkyne/biotin-terminated copolymers which were further employed to generate dye-incorporated polymer-protein hybrids via the biotin-avidin interaction with avidin or "click" bioconjugation with azide-modified BSA. We have overcome two fundamental limitations in the synthesis of bioconjugates: (a) the basic restriction in the diversity of copolymers which can be synthesized for producing bioconjugates, (b) the limitation in the number of dyes/drug molecules that can be attached per protein molecule. The copolymers possessed enhanced optical properties compared to the dye due to increased solubility in water. Potential utility of these copolymers and conjugates in multiwell plate based assays, cell surface imaging and in vivo animal imaging were explored.

Poly(ethylene glycol) (PEG)-based star polymers with a cationic core were prepared by atom transfer radical polymerization (ATRP) for in vitro nucleic acid (NA) delivery. The star polymers were synthesized by ATRP of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA). Star polymers were characterized by gel permeation chromatography, zeta potential, and dynamic light scattering. These star polymers were combined with either plasmid DNA (pDNA) or short interfering RNA (siRNA) duplexes to form polyplexes for intracellular delivery. These polyplexes with either siRNA or pDNA were highly effective in NA delivery, particularly at relatively low star polymer weight or molar ratios, highlighting the importance of NA release in efficient delivery systems.

Cationic nanogels with site-selected functionality were designed for the delivery of nucleic acid payloads targeting numerous therapeutic applications. Functional cationic nanogels containing quaternized 2-(dimethylamino)ethyl methacrylate and a cross-linker with reducible disulfide moieties (qNG) were prepared by activators generated by electron transfer (AGET) atom transfer radical polymerization (ATRP) in an inverse miniemulsion. Polyplex formation between the qNG and nucleic acid exemplified by plasmid DNA (pDNA) and short interfering RNA (siRNA duplexes) were evaluated. The delivery of polyplexes was optimized for the delivery of pDNA and siRNA to the Drosophila Schneider 2 (S2) cell-line. The qNG/nucleic acid (i.e., siRNA and pDNA) polyplexes were found to be highly effective in their capabilities to deliver their respective payloads.

This article describes the synthesis of novel well defined polysaccharide–polymer bioconjugates. Alkyne-containing bioconjugates were prepared using Cu(I) catalyzed azide–alkyne [3 + 2] dipolar cycloaddition, i.e. ‘click’ chemistry between an alkyne functionalized low molecular weight heparin (LMWH) and α-azide functionalized stimuli-responsive copolymers synthesized by atom transfer radical polymerization using Activators Generated by Electron Transfer (AGET). The alkyne functionality was incorporated into the heparin by conducting a high yield amidation of the polysaccharide using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride. The structure and composition of the novel bioconjugates were confirmed by FTIR, NMR and thermogravimetric analysis (TGA).

Using a genetically engineered protein, containing a non-natural amino acid bearing an atom transfer radical polymerization (ATRP) initiator, protein–nanogel hybrids (PNHs) were synthesized by activator generated by electron transfer (AGET) ATRP in an inverse miniemulsion. The route presented is an appropriate synthetic strategy to covalently and site specifically incorporate green fluorescent protein (GFP) into well-defined nanogels. These PNHs were analyzed using dynamic light scattering (DLS), UV-visible fluorescence spectroscopy and confocal microscopy to confirm the successful integration of GFP proteins into each nanogel (NG), while preserving its native tertiary structure.