Search

Present-day ocean color satellite sensors, which principally provide reliable data on chlorophyll, sediments, and colored dissolved organic material in the open ocean, are not well suited for coastal and inland water studies for a variety of reasons, including coarse spatial and spectral resolution plus challenges with atmospheric correction. National Aeronautics and Space Administration (NASA) airborne mission concepts tested in 2011, 2013, 2017, and 2018 over Monterey Bay, CA, and nearby inland waters have demonstrated the feasibility of improving airborne monitoring and research activities in case-1 and case-2 aquatic ecosystems through the combined use of state-of-the-art above- and in-water measurement capabilities. These competencies have evolved through time to produce a sensor-web approach: imaging spectrometer, microradiometers, and a sun photometer (airborne) with their analogous algorithms, and with corresponding in-water radiometers and ground-based sun photometry. The NASA airborne instrument suite and mission concept demonstrations, leveraging high-quality above- and in-water data, significantly improves the fidelity as well as the spatial and spectral resolution of observations for studying and monitoring water quality in oceanic, coastal, and inland water ecosystems. The goal of this series of projects was to develop and fly a portable airborne sensor suite for NASA science missions focusing on a gradient of water types from oligotrophic to turbid waters addressing the challenges of an optically complex coastal ocean zone and inland waters. The airborne radiometry in this range of aquatic conditions and sites has supported improved results of studies of water quality and biogeochemistry and provides capabilities for research areas such as ocean productivity and biogeochemistry; aquatic impacts of coastal landscape alteration; coastal, estuarine, and inland waters ecosystem productivity; atmospheric correction; and regional climate variability.

The 2013-2015 Hyperspectral Infrared Imager (HyspIRI) Preparatory Flight Campaign, using the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and MODIS/ASTER Airborne Simulator (MASTER), seeks to demonstrate appropriate sensor signal, spatial and spectral resolution, and orbital pass geometry for a global mission to reveal ecological and climatic gradients expressed in the selected California, USA study area. One of the awarded projects focused on the flight transects covering the coastal ocean to demonstrate that the AVIRIS data can be used to infer phytoplankton functional types at the land-sea interface. Specifically, this project directly assesses whether HyspIRI can provide adequate signal in the complex aquatic environment of the coastal zone to address questions of algal bloom dynamics, water quality, transient responses to human disturbance, river runoff, and red tides. Phytoplankton functional type (PFT), or biodiversity, can be determined from ocean color using the Phytoplankton Detection with Optics (PHYDOTax) algorithm and this information can be used to detect and monitor for harmful algal blooms. PHYDOTax is sensitive to spectral shape and accurate retrievals of ocean color across the visible spectral range is needed. The specific goal of this paper is to address the challenges of sensor capabilities and atmospheric correction in coastal environments by assessing two atmospheric correction methods using AVIRIS data for the retrieval of ocean color for use in derived products of chlorophyll-a and phytoplankton functional type. The atmospheric correction algorithms Atmospheric Removal (ATREM) and Tafkaa were applied to AVIRIS imagery of Monterey Bay, CA collected on 10 April 2013 and 31 October 2013. Data products from the imagery were compared with shipboard measurements including chlorophyll-a from whole-water samples and phytoplankton community structure estimated from diagnostic pigment markers using CHEMical TAXonomy (CHEMTAX). Using ATREM and Tafkaa and a selected set of input parameters for the scenes, we were unable to produce accurate retrievals of ocean color for the determination of chlorophyll-a and phytoplankton diversity. A modified ATREM correction produced science-quality data in which chlorophyll-a was accurately estimated using the Ocean Color 3 (OC3) chlorophyll-a algorithm, but biodiversity using PHYDOTax was not accurately estimated. Improvements in sensor calibration, sensitivity, and atmospheric correction of the HyspIRI imagery data set is needed in order to adequately estimate biogeochemically meaningful data products for the ocean such as chlorophyll-a, inherent optical properties, or PFTs. The HyspIRI Science Team is seeking improvements so the HyspIRI Airborne Campaign data set can be used for algorithm development to understand biodiversity and ecosystem function of coastal habitats that are facing increasing threats of human impact and climate change.

The 2013–2015 Hyperspectral Infrared Imager (HyspIRI) Preparatory Flight Campaign, using the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and MODIS/ASTER Airborne Simulator (MASTER), seeks to demonstrate appropriate sensor signal, spatial and spectral resolution, and orbital pass geometry for a global mission to reveal ecological and climatic gradients expressed in the selected California, USA study area. One of the awarded projects focused on the flight transects covering the coastal ocean to demonstrate that the AVIRIS data can be used to infer phytoplankton functional types at the land–sea interface. Specifically, this project directly assesses whether HyspIRI can provide adequate signal in the complex aquatic environment of the coastal zone to address questions of algal bloom dynamics, water quality, transient responses to human disturbance, river runoff, and red tides. Phytoplankton functional type (PFT), or biodiversity, can be determined from ocean color using the Phytoplankton Detection with Optics (PHYDOTax) algorithm and this information can be used to detect and monitor for harmful algal blooms. PHYDOTax is sensitive to spectral shape and accurate retrievals of ocean color across the visible spectral range is needed. The specific goal of this paper is to address the challenges of sensor capabilities and atmospheric correction in coastal environments by assessing two atmospheric correction methods using AVIRIS data for the retrieval of ocean color for use in derived products of chlorophyll-a and phytoplankton functional type. The atmospheric correction algorithms Atmospheric Removal (ATREM) and Tafkaa were applied to AVIRIS imagery of Monterey Bay, CA collected on 10 April 2013 and 31 October 2013. Data products from the imagery were compared with shipboard measurements including chlorophyll-a from whole-water samples and phytoplankton community structure estimated from diagnostic pigment markers using CHEMical TAXonomy (CHEMTAX). Using ATREM and Tafkaa and a selected set of input parameters for the scenes, we were unable to produce accurate retrievals of ocean color for the determination of chlorophyll-a and phytoplankton diversity. A modified ATREM correction produced science-quality data in which chlorophyll-a was accurately estimated using the Ocean Color 3 (OC3) chlorophyll-a algorithm, but biodiversity using PHYDOTax was not accurately estimated. Improvements in sensor calibration, sensitivity, and atmospheric correction of the HyspIRI imagery data set is needed in order to adequately estimate biogeochemically meaningful data products for the ocean such as chlorophyll-a, inherent optical properties, or PFTs. The HyspIRI Science Team is seeking improvements so the HyspIRI Airborne Campaign data set can be used for algorithm development to understand biodiversity and ecosystem function of coastal habitats that are facing increasing threats of human impact and climate change. [ABSTRACT FROM AUTHOR]