Search

Small uncrewed aircraft systems (sUxS) are now being routinely used not only for sampling atmospheric boundary layer (ABL) processes and land-atmosphere interactions but also have significant potential to improve weather forecasting at National Weather Service (NWS) Weather Forecast Offices (WFOs). In the present study, we used observations obtained from a Meteomatics Meteodrone SSE sUxS flown on 31 days between 20 August and 10 December 2020 near Oliver Springs, Tennessee, located 35 km northwest of Knoxville, Tennessee. We flew the sUxS up to 700 m above ground level, starting around sunrise and continuing every half hour until 3.5-4.0 hours past sunrise under synoptically quiescent, fair weather conditions. These datasets were provided in real time to the local NWS WFO in Morristown, Tennessee and used by forecasters there to assist with short-term operational forecasting needs. The sUxS profiles also provided finescale details on the early-morning transition over complex terrain and how this evolution varied during the late summer to winter period, which can be used to support the initialization of numerical weather prediction models. [ABSTRACT FROM AUTHOR]

The Land-Atmosphere Feedback Experiment (LAFE) was a field campaign to investigate influences of different land surface types on the atmospheric boundary layer (ABL). The primary goals of LAFE were to better understand ABL development and structure and to improve turbulence parameterizations in numerical weather prediction models. Three 10-m micrometeorological towers were installed over different land surface types (i.e., early growth soybean, native grassland, and mature soybean) along a 1.7-km southwest-northeast-oriented line. All towers measured standard meteorological variables in addition to heat, moisture, and momentum fluxes. In this study, we used these measurements to evaluate the validity of applying Monin-Obukhov similarity theory (MOST) to represent surface-atmosphere exchange over different land surface types. We investigated relationships between stability length z and the dimensionlesswind shear fm, temperature gradient fh, and moisture gradient fq as well as relationships between bulk Richardson number Rib, friction coefficient Cu, heat-transfer coefficient Ct, and moisture-transfer coefficient Cr. We evaluated the new similarity functions developed using independent datasets obtained during the Verification of theOrigins of Rotation in Tornadoes Experiment-Southeast (VORTEX-SE). We found that using the Rib functions rather than themore traditional z functions to computewind, temperature, andmoisture yielded better agreementwith the VORTEX-SE observations. These findings underscore limitations in MOST and motivate the need to consider modifying the functional forms of the similarity equations that form the basis for surface-layer parameterizations in numerical weather prediction models. [ABSTRACT FROM AUTHOR]

A new Lagrangian analysis technique is developed to assimilate in situ boundary layer measurements using multi-Doppler-derived wind fields, providing output fields of water vapor mixing ratio, potential temperature, and virtual potential temperature from which the lifting condensation level (LCL) and relative humidity (RH) fields are derived. The Lagrangian analysis employs a continuity principle to bidirectionally distribute observed values of conservative variables with the 3D, evolving boundary layer airflow, followed by temporal and spatial interpolation to an analysis grid. Cloud is inferred at any grid point whose height z > zLCL or equivalently where RH ≥ 100%. Lagrangian analysis of the cumulus field is placed in the context of gridded analyses of visible satellite imagery and photogrammetric cloud-base area analyses. Brief illustrative examples of boundary layer morphology derived with the Lagrangian analysis are presented based on data collected during the International H2O Project (IHOP): 1) a dryline on 22 May 2002; 2) a cold-frontal–dryline “triple point” intersection on 24 May 2002. The Lagrangian analysis preserves the sharp thermal gradients across the cold front and drylines and reveals the presence of undulations and plumes of water vapor mixing ratio and virtual potential temperature associated with deep penetrative updraft cells and convective roll circulations. Derived cloud fields are consistent with satellite-inferred cloud cover and cloud-base locations. [ABSTRACT FROM AUTHOR]

On the afternoon and evening of 22 May 2002, high-resolution observations of the boundary layer (BL) and a dryline were obtained in the eastern Oklahoma and Texas panhandles during the International H2O Project. Using overdetermined multiple-Doppler radar syntheses in concert with a Lagrangian analysis of water vapor and temperature fields, the 3D kinematic and thermodynamic structure of the dryline and surrounding BL have been analyzed over a nearly 2-h period. The dryline is resolved as a strong (2–4 g kg-1 km-1) gradient of water vapor mixing ratio that resides in a nearly north–south-oriented zone of convergence. Maintained through frontogenesis, the dryline is also located within a gradient of virtual potential temperature, which induces a persistent, solenoidally forced secondary circulation. Initially quasi-stationary, the dryline retrogrades to the west during early evening and displays complicated substructures including small wavelike perturbations that travel from south to north at nearly the speed of the mean BL flow. A second, minor dryline has similar characteristics to the first, but has weaker gradients and circulations. The BL adjacent to the dryline exhibits complicated structures, consisting of combinations of open cells, horizontal convective rolls, and transverse rolls. Strong convergence and vertical motion at the dryline act to lift moisture, and high-based cumulus clouds are observed in the analysis domain. Although the top of the analysis domain is below the lifted condensation level height, vertical extrapolation of the moisture fields generally agrees with cloud locations. Mesoscale vortices that move along the dryline induce a transient eastward dryline motion due to the eastward advection of dry air following misocyclone passage. Refractivity-based moisture and differential reflectivity analyses are used to help interpret the Lagrangian analyses. [ABSTRACT FROM AUTHOR]

Cumulus formation and convection initiation are examined near a cold front–dryline “triple point” intersection on 24 May 2002 during the International H2O Project (IHOP). A new Lagrangian objective analysis technique assimilates in situ measurements using time-dependent Doppler-derived 3D wind fields, providing output 3D fields of water vapor mixing ratio, virtual potential temperature, and lifted condensation level (LCL) and water-saturated (i.e., cloud) volumes on a subdomain of the radar analysis grid. The radar and Lagrangian analyses reveal the presence of along-wind (i.e., longitudinal) and cross-wind (i.e., transverse) roll circulations in the boundary layer (BL). A remarkable finding of the evolving radar analyses is the apparent persistence of both transverse rolls and individual updraft, vertical vorticity, and reflectivity cores for periods of up to 30 min or more while moving approximately with the local BL wind. Satellite cloud images and single-camera ground photogrammetry imply that clouds tend to develop either over or on the downwind edge of BL updrafts, with a tendency for clouds to elongate and dissipate in the downwind direction relative to cloud layer winds due to weakening updrafts and mixing with drier overlying air. The Lagrangian and radar wind analyses support a parcel continuity principle for cumulus formation, which requires that rising moist air parcels achieve their LCL before moving laterally out of the updraft. Cumuli form within penetrative updrafts in the elevated residual layer (ERL) overlying the moist BL east of the triple point, but remain capped by a convection inhibition (CIN)-bearing layer above the ERL. Dropsonde data suggest the existence of a convergence line about 80 km east of the triple point where deep lifting of BL moisture and locally reduced CIN together support convection initiation. [ABSTRACT FROM AUTHOR]

Rotary-wing small unmanned aircraft systems (sUAS) are increasingly being used for sampling thermodynamic and chemical properties of the Earth's atmospheric boundary layer (ABL) because of their ability to measure at high spatial and temporal resolutions. Therefore, they have the potential to be used for long-term quasi-continuous monitoring of the ABL, which is critical for improving ABL parameterizations and improving numerical weather prediction (NWP) models through data assimilation. Before rotary-wing aircraft can be used for these purposes, however, their performance and the sensors used therein must be adequately characterized. In the present study, we describe recent calibration and validation procedures for thermodynamic sensors used on two rotary-wing aircraft: A DJI S-1000 and MD4-1000. These evaluations indicated a high level of confidence in the on-board measurements. We then used these measurements to characterize the spatiotemporal variability of near-surface (up to 300-m AGL) temperature and moisture fields as a component of two recent field campaigns: The Verification of the Origins of Rotation in Tornadoes Experiment in the Southeast U.S. (VORTEX-SE) in Alabama, and the Land Atmosphere Feedback Experiment (LAFE) in northern Oklahoma. [ABSTRACT FROM AUTHOR]

The thermodynamic properties of the atmospheric boundary layer (ABL) play an important role in several atmospheric processes such as convection initiation, turbulence mixing, the exchange of heat and momentum, and cloud-microphysics. Since the ABL depth (henceforth, BLD) defines the volume of the ABL, many studies consider BLD to be a key scaling parameter to understand and quantify ABL mixing processes. However, most of these studies attributed both BLD temporal and horizontal variability on various scales solely to the impact of underlying surface forcing via locally generated buoyancy fluxes and static stability. We argue that the impact of horizontal advection is often neglected yet important for a more thorough understanding of ABL thermodynamics and kinematics. Here we identified four potentially advection-dominated ABL regimes across (1) the urban-rural interface, (2) complex terrain and adjacent plains, (3) the land-sea interface where horizontal transport of marine boundary layer airmasses influences the regional ABL over coastal areas, and (4) frontal environments where mid-latitude cyclones affect ABL processes via passages of cold and warm frontal boundaries. We then introduced a conceptual framework based on observations so that ABL processes are explained not only by surface forcing but also by horizontal advection of mass, momentum, and energy. This work will help advance our understanding of ABL processes and single out potential sources that trigger drastic changes in ABL thermodynamic features including the BLDs under diverse horizontal advection environments. • The thermodynamic features of atmospheric boundary layer under horizontal advection. • Advection-dominated features in atmospheric boundary layer depths. • Impact of frontal systems on atmospheric boundary layer depths. • Atmospheric boundary layer depth variability across complex interfaces. [ABSTRACT FROM AUTHOR]