Search

RATIONALE: On-line chemical characterization methods of atmospheric aerosols are essential to increase our understanding of physicochemical processes in the atmosphere, and to study biosphere-atmosphere interactions. Several techniques, including aerosol mass spectrometry, are nowadays available, but they all suffer from some disadvantages. In this research, desorption atmospheric pressure photoionization high-resolution (Orbitrap) mass spectrometry (DAPPIHRMS) is introduced as a complementary technique for the fast analysis of aerosol chemical composition without the need for sample preparation. METHODS: Atmospheric aerosols from city air were collected on a filter, desorbed in a DAPPI source with a hot stream of toluene and nitrogen, and ionized using a vacuum ultraviolet lamp at atmospheric pressure. To study the applicability of the technique for ambient aerosol analysis, several samples were collected onto filters and analyzed, with the focus being on selected organic acids. To compare the DAPPI-HRMS data with results obtained by an established method, each filter sample was divided into two equal parts, and the second half of the filter was extracted and analyzed by liquid chromatography/mass spectrometry (LC/MS). RESULTS: The DAPPI results agreed with the measured aerosol particle number. In addition to the targeted acids, the LC/MS and DAPPI-HRMS methods were found to detect different compounds, thus providing complementary information about the aerosol samples. CONCLUSIONS: DAPPI-HRMS showed several important oxidation products of terpenes, and numerous compounds were tentatively identified. Thanks to the soft ionization, high mass resolution, fast analysis, simplicity and on-line applicability, the proposed methodology has high potential in the field of atmospheric research. [ABSTRACT FROM AUTHOR]

Abstract: A method is described to determine vapor pressures of compounds in multicomponent systems simultaneously. The method is based on temperature-gradient analysis by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GCxGC-TOFMS). Vapor pressures are determined with the aid of known vapor pressure values of reference compounds eluting before and after the analytes. Reference compounds with the same functionalities as the analytes are preferred, but when these are not available, the alkane series can be utilized. The number of compounds whose vapor pressures can be determined is limited only by the peak capacity of the chromatographic system. Although the lowest subcooled vapor pressure determined was 0.006Pa, for tetrahydroaraucarolone in an atmospheric aerosol sample, vapor pressures as low as 10−6 Pa can be measured with the described set-up. Even lower values can be measured with higher GC temperatures and longer analysis times. Since only a few picograms of compound is required, in a mixture of any complexity, the GCxGC-TOFMS method offers unique sensitivity, rapidity, and comprehensiveness. [Copyright &y& Elsevier]

Abstract: In the present study, sample collection and preparation were directly integrated with a chromatographic system by coupling a particle-into-liquid sampler for the first time on-line with solid-phase extraction-liquid chromatography–tandem mass spectrometry. Several organic acids, such as adipic, hydroxyglutaric, mandelic, vanillic, cis-pinonic, pinic, azelaic and sebacic, were used in the research. For sample pretreatment and concentration, strong anion exchange material was used in the extraction. Sampling, extraction and analysis conditions were optimized to obtain reliable information about aerosol chemical composition. To evaluate the performance of the on-line coupled system, half of each sample was analysed on-line and the other half was derivatized and analysed off-line by gas chromatography–mass spectrometry. Comparison of the two techniques with use of t-test showed the results to be in an excellent agreement. Limits of detection of studied acids in on-line system were between 0.1 and 0.9ng. The on-line coupled system is fast and reliable and a promising tool for the real time analysis of organic acids in atmospheric aerosols. [Copyright &y& Elsevier]

A correction to the article "Methods for characterization of organic compounds in atmospheric aerosol particles" that was published in a previous issue of 2015 is presented.

Abstract: A complete methodology was developed for the determination of ten aliphatic and nine aromatic amines in atmospheric aerosol particles. Before the liquid chromatography — tandem mass spectrometric separation and determination, the derivatization reaction of the analytes using dansyl chloride was accelerated by ultrasounds. From three different ionization techniques studied electrospray ionization was superior in terms of sensitivity, linearity, repeatability and reproducibility over atmospheric pressure chemical ionization and photoionization for the target analytes. The method developed was validated for the gas phase, 30nm and total suspended atmospheric aerosol particles. The method quantification limits ranged between 1.8 and 71.7pg. The accuracy and the potential matrix effects were evaluated using a standard addition methodology. Recoveries from 92.1% to 109.1%, the repeatability from 0.6% to 8.4% and the reproducibility from 2.3% to 9.8% were obtained. The reliability of the methodology was proved by the statistical evaluation. Finally, the developed methodology was applied to the determination of the target analytes in eight size separated ultrafine particulate (Dp=30±4nm) samples and in eight total suspended particulate samples collected at the SMEAR II station. The mean concentrations for aliphatic amines were between 0.01 and 42.67ngm−3 and for aromatic amines between 0.02 and 1.70ngm−3. Thirteen amines were quantified for the first time in 30nm aerosol particles. [Copyright &y& Elsevier]

Abstract: Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods. A new sampling system is proposed where particles are charged with a bipolar charger and size-segregated with a differential mobility analyzer. This system was successfully used to sample particles from wood pyrolysis with particle sizes 30–100nm. Particles were analyzed by four techniques: comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry, gas chromatography–time-of-flight mass spectrometry, gas chromatography–quadrupole mass spectrometry, and aerosol mass spectrometry (aerosol MS). In the chromatographic techniques, particles were collected on a filter and analyzed off-line after sample preparation, whereas in the aerosol MS, particle analysis was performed directly from the particle source. Target compounds of the samples were polyaromatic hydrocarbons and n-alkanes. The analytical techniques were compared and their advantages and disadvantages were evaluated. The sampling system operated well and target compounds were identified in low concentrations. [Copyright &y& Elsevier]