Search

The large apertures of the upcoming generation of Giant Segmented Mirror Telescopes will enable unprecedented angular resolutions that scale as $\propto$ $\lambda$/D and higher sensitivities that scale as $D^4$ for point sources corrected by adaptive optics. However, all will have pupil segmentation caused by mechanical struts holding up the secondary mirror [European Extremely Large Telescope and Thirty Meter Telescope] or intrinsically, by design, as in the Giant Magellan Telescope. These gaps will be separated by more than a typical atmospheric coherence length (Fried Parameter). The pupil fragmentation at scales larger than the typical atmospheric coherence length, combined with wavefront sensors with weak or ambiguous sensitivity to differential piston, can introduce differential piston areas of the wavefront known as "petal modes". Commonly used wavefront sensors, such as a pyramid WFS, also struggle with phase wrapping caused by >$\lambda$/2 differential piston WFE. We have developed the holographic dispersed fringe sensor, a single pupil-plane optic that employs holography to interfere the dispersed light from each segment onto different spatial locations in the focal plane to sense and correct differential piston between the segments. This allows for a very high and linear dynamic piston sensing range of approximately $\pm$10 $\mu$m. We have begun the initial attempts at phasing a segmented pupil utilizing the HDFS on the High Contrast Adaptive optics phasing Testbed and the Extreme Magellan Adaptive Optics instrument (MagAO-X) at the University of Arizona. Additionally, we have demonstrated use of the HDFS as a differential piston sensor on-sky for the first time. We were able to phase each segment to within $\pm\lambda$/11.3 residual piston WFE ($\lambda$ = 800 nm) of a reference segment and achieved ~50 nm RMS residual piston WFE across the aperture in poor seeing conditions., Comment: 34 pages, 26 figures

Spectroastrometry, which measures wavelength-dependent shifts in the center of light, is well-suited for studying objects whose morphology changes with wavelength at very high angular resolutions. Photonic lantern (PL)-fed spectrometers have potential to enable measurement of spectroastrometric signals because the relative intensities between the PL output SMFs contain spatial information on the input scene. In order to use PL output spectra for spectroastrometric measurements, it is important to understand the wavelength-dependent behaviors of PL outputs and develop methods to calibrate the effects of time-varying wavefront errors in ground-based observations. We present experimental characterizations of the 3-port PL on the SCExAO testbed at the Subaru Telescope. We develop spectral response models of the PL and verify the behaviors with lab experiments. We find sinusoidal behavior of astrometric sensitivity of the 3-port PL as a function of wavelength, as expected from numerical simulations. Furthermore, we compare experimental and numerically simulated coupling maps and discuss their potential use for offsetting pointing errors. We then present a method of building PL spectral response models (solving for the transfer matrices as a function of wavelength) using coupling maps, which can be used for further calibration strategies., Comment: Accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

The objective of the coronagraphic IFU of RISTRETTO is to enable High Dispersion Coronagraphy of planets at a distance of 2$\lambda$/D from their star, without compromising on transmission. The new idea of a PIAA Nuller (PIAAN) allows contrast down to 10$^{-5}$ over large bandwidth $\ge$ 25%, with high transmission $\ge$ 70% at the distance of 2$\lambda$/D. While RISTRETTO will be installed on a VLT, this development is of tremendous importance for fully exploiting future ELTs XAO. We will discuss our PIAAN prototyping activities. This covers 1) the characterisation of our 2nd set of IFU bundles, with 3D-printed MLAs; 2) the characterisation of our first PIAA optics; 3) the integration of a high contrast bench, planned for prototyping of Front-End control strategies; 4) the characterisation of the PIAAN system on the bench.

We present significant upgrades to the VAMPIRES instrument, a visible-light (600 nm to 800 nm) high-contrast imaging polarimeter integrated within SCExAO on the Subaru telescope. Key enhancements include new qCMOS detectors, coronagraphs, polarization optics, and a multiband imaging mode, improving sensitivity, resolution, and efficiency. These upgrades position VAMPIRES as a powerful tool for studying sub-stellar companions, accreting protoplanets, circumstellar disks, stellar jets, stellar mass-loss shells, and solar system objects. The instrument achieves angular resolutions from 17 mas to 21 mas and Strehl ratios up to 60\%, with 5$\sigma$ contrast limits of $10^{\text{-}4}$ at 0.1'' to $10^{\text{-}6}$ beyond 0.5''. We demonstrate these capabilities through spectro-polarimetric coronagraphic imaging of the HD 169142 circumstellar disk, ADI+SDI imaging of the sub-stellar companion HD 1160B, narrowband H$\alpha$ imaging of the R Aqr emission nebula, and spectro-polarimetric imaging of Neptune., Comment: 36 pages, 33 figures, accepted to PASP

We analyze near-infrared integral field spectropolarimetry of the AB Aurigae protoplanetary disk and protoplanet (AB Aur b), obtained with SCExAO/CHARIS in 22 wavelength channels covering the J, H, and K passbands ($\lambda_{\rm o}$ = 1.1--2.4 $\mu m$) over angular separations of $\rho$ $\approx$ 0.13" to 1.1" ($\sim$20--175 au). Our images resolve spiral structures in the disk in each CHARIS channel. At the longest wavelengths, the data may reveal an extension of the western spiral seen in previous polarimetric data at $\rho$ $<$ 0.3" out to larger distances clockwise from the protoplanet AB Aur b, coincident with the ALMA-detected $CO$ gas spiral. While AB Aur b is detectable in complementary total intensity data, it is a non-detection in polarized light at $\lambda$ $>$ 1.3 $\mu $m. While the observed disk color is extremely red across $JHK$, the disk has a blue intrinsic scattering color consistent with small dust grains. The disk's polarization spectrum is redder than AB Aur b's total intensity spectrum. The polarization fraction peaks at $\sim$ 0.6 along the major disk axis. Radiative transfer modeling of the CHARIS data shows that small, porous dust grains with a porosity of $p$ = 0.6--0.8 better reproduce the scattered-light appearance of the disk than more compact spheres ($p$ = 0.3), especially the polarization fraction. This work demonstrates the utility of integral field spectropolarimetry to characterize structures in protoplanetary disks and elucidate the properties of the disks' dust., Comment: 23 pages, 17 Figures, accepted to AAS Journals

Real-time control (RTC) is pivotal for any Adaptive Optics (AO) system, including high-contrast imaging of exoplanets and circumstellar environments. It is the brain of the AO system, and what wavefront sensing and control (WFS\&C) techniques need to work with to achieve unprecedented image quality and contrast, ultimately advancing our understanding of exoplanetary systems in the context of high contrast imaging (HCI). Developing WFS\&C algorithms first happens in simulation or a lab before deployment on-sky. The transition to on-sky testing is often challenging due to the different RTCs used. Sharing common RTC standards across labs and telescope instruments would considerably simplify this process. A data architecture based on the interprocess communication method known as shared memory is ideally suited for this purpose. The CACAO package, an example of RTC based on shared memory, was initially developed for the Subaru-SCExAO instrument and now deployed on several benches and instruments. This proceeding discusses the challenges, requirements, implementation strategies, and performance evaluations associated with integrating a shared memory-based RTC. The Santa Cruz Extreme AO Laboratory (SEAL) bench is a platform for WFS\&C development for large ground-based segmented telescopes. Currently, SEAL offers the user a non-real-time version of CACAO, a shared-memory based RTC package initially developed for the Subaru-SCExAO instrument, and now deployed on several benches and instruments. We show here the example of the SEAL RTC upgrade as a precursor to both RTC upgrade at the 3-m Shane telescopes at Lick Observatory (Shane-AO) and a future development platform for the Keck II AO. This paper is aimed at specialists in AO, astronomers, and WFS\&C scientists seeking a deeper introduction to the world of RTCs., Comment: SPIE Astronomical Telescope and Intrumentation 2024

The MMT Adaptive optics exoPlanet characterization System (MAPS) is currently in its engineering phase, operating on-sky at the MMT Telescope on Mt. Hopkins in southern Arizona. The MAPS Adaptive Secondary Mirror's actuators are controlled by a closed loop modified PID control law and an open loop feed-forward law, which in combination allows for faster actuator response time. An essential element of achieving the secondary's performance goals involves the process of PID gain tuning. To start, we briefly discuss the design of the MAPS ASM and its actuators. We then describe the actuator positional control system and control law. Next, we discuss a few of the issues that make ASM tuning difficult. We then outline our initial attempts at tuning the actuator controllers and discuss the use of actuator positional power spectra for both tuning and determining the health and failure states of individual actuators. We conclude by presenting the results of our latest round of tuning configuration trials, which have been successful at decreasing mirror latency, increasing operational mirror modes and improving image PSF., Comment: To be published in Proceedings of SPIE, Optics and Photonics 2024. 24 pages, 16 figures, 5 tables. Lead Author, J. Johnson. Second Lead Author, A. Vaz. Project P.I., K. Morzinski. Project Second P.I.s, J. Patience and S. Sivanandam, Project Manager, M. Montoya

RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO \cite{lovis_2016a}, aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets placed at about 35mas from their star, i.e. $2\lambda/D$ at $\lambda$=750nm. The instrument is composed of an extreme adaptive optics, a coronagraphic Integral Field Unit, and a diffraction-limited spectrograph (R=140.000, $\lambda =$620-840 nm). We present the RISTRETTO XAO architecture that reach the specification, providing contrasts down to $5\times10^{-5}$ at 2$\lambda/D$ from the star in the visible, in the presence of atmosphere and low wind effect. This performance is allowed by a new two-sensors-one-dm architecture, some variations to the already known concepts of unmodulated pyWFS and zWFS, and exploiting to the maximum of their capabilities the state-of-the-art high speed, low noise cameras \& fast DM. We present the result of end-to-end simulations, that demonstrate stable closed loop operation of an unmodulated pyramid and a zernike WFS (together), and in presence of low wind effect., Comment: 13 pages, 12 figure, SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional, Comment: Accepted in Astronomy and Astrophysics journal on 9/11/2024

We describe the motivation, design, and early results for our 42-night, 125 star Subaru/SCExAO direct imaging survey for planets around accelerating stars. Unlike prior large surveys, ours focuses only on stars showing evidence for an astrometric acceleration plausibly due to the dynamical pull of an unseen planet or brown dwarf. Our program is motivated by results from a recent pilot program that found the first planet jointly discovered from direct imaging and astrometry and resulted in a planet and brown dwarf discovery rate substantially higher than previous unbiased surveys like GPIES. The first preliminary results from our program reveal multiple new companions; discovered planets and brown dwarfs can be further characterized with follow-up data, including higher-resolution spectra. Finally, we describe the critical role this program plays in supporting the Roman Space Telescope Coronagraphic Instrument, providing a currently-missing list of targets suitable for the CGI technological demonstration without which the CGI tech demo risks failure., Comment: 13 pages, 7 figures; Proc. SPIE in press

The petaling effect, induced by pupil fragmentation from the telescope spider, drastically affects the performance of high contrast instruments by inducing core splitting on the PSF. Differential piston/tip/tilt aberrations within each optically separated fragment of the pupil are poorly measured by commonly used Adaptive Optics (AO) systems. We here pursue a design of dedicated low-order wavefront sensor -- or petalometers -- to complement the main AO. Interferometric devices sense differential aberrations between fragments with optimal sensitivity; their weakness though is their limitation to wrapped phase measurements. We show that by combining multiple spectral channels, we increase the capture range for petaling aberrations beyond several microns, enough to disambiguate one-wave wrapping errors made by the main AO system. We propose here to implement a petalometer from the multi-wavelength imaging mode of the VAMPIRES visible-light instrument, deployed on SCExAO at the Subaru Telescope. The interferometric measurements obtained in four spectral channels through a 7 hole non-redundant mask allow us to effiiently reconstruct diffierential piston between pupil petals., Comment: Paper 13097-89 from SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instruments stability and sensitivity. In order to perform differential phase measurements at the H$\alpha$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed. This PIC performs the visible combination of the beams coming from the telescope pupil sub-apertures. In this work, TEEM Photonics waveguides fabricated by $K_+:Na_+$ ion exchange in glass are characterized in terms of single-mode range and mode field diameter. The waveguide diffused index profile is modeled on Beamprop software. FIRST beam combiner building blocks are simulated, especially achromatic directional couplers and passive $\pi/2$ phase shifters for a potential ABCD interferometric combination., Comment: Proceeding. arXiv admin note: text overlap with arXiv:2409.03476

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instrument's stability and sensitivity. In order to perform differential phase measurements at the H$\alpha$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed in collaboration with TEEM Photonics. This PIC performs the interferometric combination of the beams coming from sub-apertures selected in the telescope pupil, thus implementing the pupil remapping technique to restore the diffraction limit of the telescope. In this work, we report on the latest developments carried out within the FIRST project to produce a high performance visible PIC. The PICs are manufactured by TEEM Photonics, using their technology based on $K_+:Na_+$ ion exchange in glass. The first part of the study consists in the experimental characterization of the fundamental properties of the waveguides, in order to build an accurate model, which is the basis for the design of more complex functions. In the second part, theoretical designs and their optimization for three types of combiner architectures are presented: symmetric directional coupler, asymmetric directional couplers and ABCD cells including achromatic phase shifters., Comment: Preprint

RISTRETTO is a visible high-resolution spectrograph fed by an extreme adaptive optics (AO) system, to be proposed as a visitor instrument on ESO VLT. The main science goal of RISTRETTO is to pioneer the detection and atmospheric characterisation of exoplanets in reflected light, in particular the temperate rocky planet Proxima b. RISTRETTO will be able to measure albedos and detect atmospheric features in a number of exoplanets orbiting nearby stars for the first time. It will do so by combining a high-contrast AO system working at the diffraction limit of the telescope to a high-resolution spectrograph, via a 7-spaxel integral-field unit (IFU) feeding single-mode fibers. Further science cases for RISTRETTO include the study of accreting protoplanets such as PDS70b/c through spectrally-resolved H-alpha emission, and spatially-resolved studies of Solar System objects such as icy moons and the ice giants Uranus and Neptune. The project is in the manufacturing phase for the spectrograph sub-system, and the preliminary design phase for the AO front-end. Specific developments for RISTRETTO include a novel coronagraphic IFU combining a phase-induced amplitude apodizer (PIAA) to a 3D-printed microlens array feeding a bundle of single-mode fibers. It also features an XAO system with a dual wavefront sensor aiming at high robustness and sensitivity, including to pupil fragmentation. RISTRETTO is a pathfinder instrument in view of similar developments at the ELT, in particular the SCAO-IFU mode of ELT-ANDES and the future ELT-PCS instrument., Comment: 6 pages, 1 figure, SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

The facility adaptive optics of the Subaru Telescope AO188 recently received some long-awaited upgrades: a new 3224-actuator deformable mirror (DM) from ALPAO (hence the name change to AO3000 or AO3k), an upgraded GPU-based real-time computer, a visible nonlinear curvature wavefront sensor and a near-infrared wavefront sensor (NIR WFS), closing the loop at up to 2~kHz. The wavefront sensors were added in 2023, while the DM will be installed at the beginning of 2024. With these new features, AO3k will provide extreme-AO level of correction to all the instruments on the IR Nasmyth platform: The NIR-MIR camera and spectrograph IRCS, the high-resolution Doppler spectrograph IRD, and the high-contrast instrument SCExAO. AO3k will also support laser tomography (LTAO), delivering high Strehl ratio imaging with large sky coverage. The high Strehl will especially benefit SCExAO for high-contrast imaging, both in infrared and visible. The second stage extreme AO will no longer have to chase large residual atmospheric turbulence, and will focus on truly high-contrast techniques to create and stabilize dark holes, as well as coherent differential imaging techniques. We will finally be able to leverage the several high performance coronagraphs tested in SCExAO, even in the visible. AO3k will answer crucial questions as a precursor for future adaptive optics systems for ELTs, especially as a technology demonstrator for the HCI Planetary Systems Imager on the Thirty Meter Telescope. A lot of questions are still unanswered on the on-sky behavior of high actuator counts DMs, NIR wavefront sensing, the effect of rolling shutters or persistence. We present here the first on-sky results of AO3k, before the system gets fully offered to the observers in the second half of 2024. These results give us some insight on the great scientific results we hope to achieve in the future., Comment: 15 pages, 11 figures, proceedings of the SPIE Astronomical Telescopes and Instrumentation 2024 (Yokohama, Japan)

GLINT is a nulling interferometer downstream of the SCExAO extreme-adaptive-optics system at the Subaru Telescope (Hawaii, USA), and is a pathfinder instrument for high-contrast imaging of circumstellar environments with photonic technologies. GLINT is effectively a testbed for more stable, compact, and modular instruments for the era of 30m-class telescopes. GLINT is now undergoing an upgrade with a new photonic chip for more achromatic nulls, and for phase information to enable fringe tracking. Here we provide an overview of the motivations for the GLINT project and report on the design of the new chip, the on-site installation, and current status., Comment: Proc. SPIE Astronomical Telescopes + Instrumentation 2024 (Yokohama, Japan), Optical and Infrared Interferometry and Imaging IX

Exo-NINJA will realize nearIR R$\sim$4000 diffraction-limited narrow-field spectro-imaging for characterization of exoplanets and circumstellar disk structures. It uniquely combines mid-R spectroscopy, high throughput, and spatial resolution, in contrast to CHARIS, which does spectro-imaging, and REACH, which is single-point (no spatial resolution). Exo-NINJA's spectro-imaging at the telescope diffraction limit will characterize exoplanet atmospheres, detect and map (spatially and spectrally) gas accretion on protoplanets, and also detect exoplanets at small angular separation ($\lambda$/D) from their host star by spectro-astrometry. Exo-NINJA will link two instruments at the Subaru Telescope using a high-throughput hexagonal multi-mode fiber bundle (hexabundle). The fiber coupling resides between the high contrast imaging system SCExAO, which combines ExAO and coronagraph, and the medium-resolution spectrograph NINJA (R$=$4000 at JHK bands). Exo-NINJA will provide an end-to-end throughput of 20% compared to the 1.5% obtained with REACH. Exo-NINJA is scheduled for implementation on the Subaru Telescope's NasIR platform in 2025; we will present a concise overview of its future installation, laboratory tests such as the throughput and focal ratio degradation (FRD) performance of optical fiber imaging hexabundles, in the NIR and the trade-offs for fiber choices for the NINJA-SCExAO hexabundle fiber cable, and the expected on sky performance., Comment: Proc Spie, in press

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution., Comment: Proceeding published in SPIE Astronomical Telescopes + Instrumentation (2024) - Paper number 13096-25

The high contrast and spatial resolution requirements for directly imaging exoplanets requires effective coordination of wavefront control, coronagraphy, observation techniques, and post-processing algorithms. However, even with this suite of tools, identifying and retrieving exoplanet signals embedded in resolved scattered light regions can be extremely challenging due to the increased noise from scattered light off the circumstellar disk and the potential misinterpretation of the true nature of the detected signal. This issue pertains not only to imaging terrestrial planets in habitable zones within zodiacal and exozodiacal emission but also to young planets embedded in circumstellar, transitional, and debris disks. This is particularly true for H{\alpha} detection of exoplanets in transitional disks. This work delves into recent H{\alpha} observations of three transitional disks systems with MagAO-X, an extreme adaptive optics system for the 6.5-meter Magellan Clay telescope. We employed angular differential imaging (ADI) and simultaneous spectral differential imaging (SSDI) in combination with KLIP, a PCA algorithm in post-processing, for optimal starlight suppression and quasi-static noise removal. We discuss the challenges in protoplanet identification with MagAO-X in environments rich with scattered and reflected light from disk structures and explore a potential solution for removing noise contributions from real astronomical objects with current observation and post-processing techniques.

The next generation of extreme adaptive optics (AO) must be calibrated exceptionally well to achieve the desired contrast for ground-based direct imaging exoplanet targets. Current wavefront sensing and control system responses deviate from lab calibration throughout the night due to non linearities in the wavefront sensor (WFS) and signal loss. One cause of these changes is the optical gain (OG) effect, which shows that the difference between actual and reconstructed wavefronts is sensitive to residual wavefront errors from partially corrected turbulence. This work details on-sky measurement of optical gain on MagAO-X, an extreme AO system on the Magellan Clay 6.5m. We ultimately plan on using a method of high-temporal frequency probes on our deformable mirror to track optical gain on the Pyramid WFS. The high-temporal frequency probes, used to create PSF copies at 10-22 lambda /D, are already routinely used by our system for coronagraph centering and post-observation calibration. This method is supported by the OG measurements from the modal response, measured simultaneously by sequenced pokes of each mode. When tracked with DIMM measurements, optical gain calibrations show a clear dependence on Strehl Ratio, and this relationship is discussed. This more accurate method of calibration is a crucial next step in enabling higher fidelity correction and post processing techniques for direct imaging ground based systems., Comment: 7 pages, 6 figures, proceedings of Adaptive Optics Systems IX at SPIE Astronomical Telescopes + Instrumentation 2024

The Giant Magellan Adaptive Optics eXtreme (GMagAO-X) instrument is a first-light high-contrast imaging instrument for the Giant Magellan Telescope (GMT). GMagAO-X's broad wavelength range and the large 25-meter aperture of the GMT creates new challenges: control of all 21.000 actuators; phasing GMT's segmented primary mirror to nm levels; active control of atmospheric dispersion to sub milli-arcsecond residuals; no chromatic pupil shear to minimize chromatic compensation errors; integrated focal plane wavefront sensing and control (WFSC). GMagAO-X will have simultaneous visible and infra-red WFS channels to control the 21.000 actuator DM. The infra-red arm will be flexible by incorporating switchable sensors such as the pyramid or Zernike WFS. One innovation that we developed for GMagAO-X is the Holographic Dispersed Fringe Sensor that measures differential piston. We have also developed several integrated coronagraphic wavefront sensors to control non-common path aberrations exactly where we need to sense them. We will discuss the key components of the WFSC strategies for GMagAO-X that address the challenges posed by the first high-contrast imaging system on the ELTs., Comment: Conference proceeding SPIE 2024

MagAO-X is the extreme coronagraphic adaptive optics (AO) instrument for the 6.5-meter Magellan Clay telescope and is currently undergoing a comprehensive batch of upgrades. One innovation that the instrument features is a deformable mirror (DM) dedicated for non-common path aberration correction (NCPC) within the coronagraph arm. We recently upgraded the 97 actuator NCPC DM with a 1000 actuator Boston Micromachines Kilo-DM which serves to (1) correct non-common path aberrations which hamper performance at small inner-working angles, (2) facilitate focal-plane wavefront control algorithms (e.g., electric field conjugation) and (3) enable 10 kHz correction speeds (up from 2 kHz) to assist post-AO, real-time low-order wavefront control. We present details on the characterization and installation of this new DM on MagAO-X as part of our efforts to improve deep contrast performance for imaging circumstellar objects in reflected light. Pre-installation procedures included use of a Twyman-Green interferometer to build an interaction matrix for commanding the DM surface, in closed-loop, to a flat state for seamless integration into the instrument. With this new NCPC DM now installed, we report on-sky results from the MagAO-X observing run in March -- May 2024 for the Focus Diversity Phase Retrieval and implicit Electric Field Conjugation algorithms for quasistatic speckle removal and in-situ Strehl ratio optimization, respectively., Comment: 9 pages, 9 figures, proceedings of SPIE Astronomical Telescopes + Instrumentation 2024

We present the preliminary design of GMagAO-X, the first-light high-contrast imager planned for the Giant Magellan Telescope. GMagAO-X will realize the revolutionary increase in spatial resolution and sensitivity provided by the 25 m GMT. It will enable, for the first time, the spectroscopic characterization of nearby potentially habitable terrestrial exoplanets orbiting late-type stars. Additional science cases include: reflected light characterization of mature giant planets; measurement of young extrasolar giant planet variability; characterization of circumstellar disks at unprecedented spatial resolution; characterization of benchmark stellar atmospheres at high spectral resolution; and mapping of resolved objects such as giant stars and asteroids. These, and many more, science cases will be enabled by a 21,000 actuator extreme adaptive optics system, a coronagraphic wavefront control system, and a suite of imagers and spectrographs. We will review the science-driven performance requirements for GMagAO-X, which include achieving a Strehl ratio of 70% at 800 nm on 8th mag and brighter stars, and post-processed characterization at astrophysical flux-ratios of 1e-7 at 4 lambda/D (26 mas at 800 nm) separation. We will provide an overview of the resulting mechanical, optical, and software designs optimized to deliver this performance. We will also discuss the interfaces to the GMT itself, and the concept of operations. We will present an overview of our end-to-end performance modeling and simulations, including the control of segment phasing, as well as an overview of prototype lab demonstrations. Finally, we will review the results of Preliminary Design Review held in February, 2024., Comment: Presented at SPIE Astronomical Telescopes

MagAO-X is the coronagraphic extreme adaptive optics system for the 6.5 m Magellan Clay Telescope. We report the results of commissioning the first phase of MagAO-X. Components now available for routine observations include: the >2 kHz high-order control loop consisting of a 97 actuator woofer deformable mirror (DM), a 2040 actuator tweeter DM, and a modulated pyramid wavefront sensor (WFS); classical Lyot coronagraphs with integrated low-order (LO) WFS and control using a third 97-actuator non-common path correcting (NCPC) DM; broad band imaging in g, r, i, and z filters with two EMCCDs; simultaneous differential imaging in H-alpha; and integral field spectroscopy with the VIS-X module. Early science results include the discovery of an H-alpha jet, images of accreting protoplanets at H-alpha, images of young extrasolar giant planets in the optical, discovery of new white dwarf companions, resolved images of evolved stars, and high-contrast images of circumstellar disks in scattered light in g-band (500 nm). We have commenced an upgrade program, called "Phase II", to enable high-contrast observations at the smallest inner working angles possible. These upgrades include a new 952 actuator NCPC DM to enable coronagraphic wavefront control; phase induced amplitude apodization coronagraphs; new fast cameras for LOWFS and Lyot-LOWFS; and real-time computer upgrades. We will report the status of these upgrades and results of first on-sky testing in March-May 2024., Comment: Presented at SPIE Astronomical Telescopes

High-contrast imaging data analysis depends on removing residual starlight from the host star to reveal planets and disks. Most observers do this with principal components analysis (i.e. KLIP) using modes computed from the science images themselves. These modes may not be orthogonal to planet and disk signals, leading to over-subtraction. The wavefront sensor data recorded during the observation provide an independent signal with which to predict the instrument point-spread function (PSF). MagAO-X is an extreme adaptive optics (ExAO) system for the 6.5-meter Magellan Clay telescope and a technology pathfinder for ExAO with GMagAO-X on the upcoming Giant Magellan Telescope. MagAO-X is designed to save all sensor information, including kHz-speed wavefront measurements. Our software and compressed data formats were designed to record the millions of training samples required for machine learning with high throughput. The large volume of image and sensor data lets us learn a PSF model incorporating all the information available. This will eventually allow us to probe smaller star-planet separations at greater sensitivities, which will be needed for rocky planet imaging., Comment: 9 pages, 5 figures, proceedings of Adaptive Optics Systems IX at SPIE Astronomical Telescopes + Instrumentation 2024

Discovering new actively-accreting protoplanets is crucial to answering open questions about planet formation. However, identifying such planets at orbital distances where they are expected to be abundant is extremely challenging, both due to the technical requirements and large distances to star-forming regions. Here we use the kernel phase interferometry (KPI) technique to search for companions around the $\sim$6 and $\sim$8 Myr old Herbig Ae stars MWC 758 and MWC 480. KPI is a data analysis technique which is sensitive to moderate asymmetries, arising from eg. a circumstellar disk or companions with contrasts of up to 6-8 mags, at separations down to and even below the classical Rayleigh diffraction limit ($\sim 1.2\lambda / D$). Using the high spectral resolution K-band mode of the SCExAO/CHARIS integral field spectrograph, we search for both excess Br-$\gamma$ line emission and continuum emission from companions around MWC 480 and MWC 758. We are able to set limits on the presence of rapidly accreting protoplanets and brown dwarfs between 4 and 16 au, well interior to those of previous studies. In Br-$\gamma$, we set limits on excess line emission equivalent to accretion rates ranging from $10^{-5} M_{j}^{2}.yr^{-1}$ to $10^{-6}M_{j}^{2}.yr^{-1}$. Our achievable contrasts demonstrate that KPI using SCExAO/CHARIS is a promising technique to search for giant accreting protoplanets at smaller separations compared to conventional imaging., Comment: 8 pages, 4 figures

The Habitable Worlds Observatory (HWO) will seek to detect and characterize potentially Earth-like planets around other stars. To ensure that the mission achieves the Astro2020 Decadal's recommended goal of 25 exoEarth candidates (EECs), we must take into account the probabilistic nature of exoplanet detections and provide "science margin" to budget for astrophysical uncertainties with a reasonable level of confidence. In this study, we explore the probabilistic distributions of yields to be expected from a blind exoEarth survey conducted by such a mission. We identify and estimate the impact of all major known sources of astrophysical uncertainty on the exoEarth candidate yield. As expected, eta_Earth uncertainties dominate the uncertainty in EEC yield, but we show that sampling uncertainties inherent to a blind survey are another important source of uncertainty that should be budgeted for during mission design. We adopt the Large UV/Optical/IR Surveyor Design B (LUVOIR-B) as a baseline and modify the telescope diameter to estimate the science margin provided by a larger telescope. We then depart from the LUVOIR-B baseline design and identify six possible design changes that, when compiled, provide large gains in exoEarth candidate yield and more than an order of magnitude reduction in exposure times for the highest priority targets. We conclude that a combination of telescope diameter increase and design improvements could provide robust exoplanet science margins for HWO., Comment: 90 pages, 26 figures, 4 tables, Submitted to JATIS

We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations., Comment: 63 pages, 28 pages, submitted to JATIS

Almost all current and future high-contrast imaging instruments will use a Pyramid wavefront sensor (PWFS) as a primary or secondary wavefront sensor. The main issue with the PWFS is its nonlinear response to large phase aberrations, especially under strong atmospheric turbulence. Most instruments try to increase its linearity range by using dynamic modulation, but this leads to decreased sensitivity, most prominently for low-order modes, and makes it blind to petal-piston modes. In the push toward high-contrast imaging of fainter stars and deeper contrasts, there is a strong interest in using the PWFS in its unmodulated form. Here, we present closed-loop lab results of a nonlinear reconstructor for the unmodulated PWFS of the Magellan Adaptive Optics eXtreme (MagAO-X) system based on convolutional neural networks (CNNs). We show that our nonlinear reconstructor has a dynamic range of >600 nm root-mean-square (RMS), significantly outperforming the linear reconstructor that only has a 50 nm RMS dynamic range. The reconstructor behaves well in closed loop and can obtain >80% Strehl at 875 nm under a large variety of conditions and reaches higher Strehl ratios than the linear reconstructor under all simulated conditions. The CNN reconstructor also achieves the theoretical sensitivity limit of a PWFS, showing that it does not lose its sensitivity in exchange for dynamic range. The current CNN's computational time is 690 microseconds, which enables loop speeds of >1 kHz. On-sky tests are foreseen soon and will be important for pushing future high-contrast imaging instruments toward their limits., Comment: Accepted for publication in A&A

The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging., Comment: Accepted to ApJL

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks., Comment: AO4ELT7 conference proceedings 2023

The pyramid wavefront sensor (PyWFS) has become increasingly popular to use in adaptive optics (AO) systems due to its high sensitivity. The main drawback of the PyWFS is that it is inherently nonlinear, which means that classic linear wavefront reconstruction techniques face a significant reduction in performance at high wavefront errors, particularly when the pyramid is unmodulated. In this paper, we consider the potential use of neural networks (NNs) to replace the widely used matrix vector multiplication (MVM) control. We aim to test the hypothesis that the neural network (NN)'s ability to model nonlinearities will give it a distinct advantage over MVM control. We compare the performance of a MVM linear reconstructor against a dense NN, using daytime data acquired on the Subaru Coronagraphic Extreme Adaptive Optics system (SCExAO) instrument. In a first set of experiments, we produce wavefronts generated from 14 Zernike modes and the PyWFS responses at different modulation radii (25, 50, 75, and 100 mas). We find that the NN allows for a far more precise wavefront reconstruction at all modulations, with differences in performance increasing in the regime where the PyWFS nonlinearity becomes significant. In a second set of experiments, we generate a dataset of atmosphere-like wavefronts, and confirm that the NN outperforms the linear reconstructor. The SCExAO real-time computer software is used as baseline for the latter. These results suggest that NNs are well positioned to improve upon linear reconstructors and stand to bring about a leap forward in AO performance in the near future., Comment: Accepted in Publications of the Astronomical Society of the Pacific, September 2023

We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-shaping optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners., Comment: Accepted to JOSA B

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms., Comment: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Uncorrected wavefront errors create speckle noise in high-contrast observations at small inner-working angles. These speckles can be sensed and controlled by using coronagraph integrated wavefront sensors. Here, we will present how the Phase Induced Amplitude Apodized Complex Mask Corongraph (PIAACMC) can be integrated with both a Self-Coherent Camera (SCC) for focal plane wavefront sensing and an extremely sensitivity high-order pupil plane Zernike wavefront sensor (ZWFS). Non-common path aberrations can be completely erased by integrating both sensors into the PIAACMC, which is of extremely high importance in high-contrast imaging., Comment: 7 pages, proceeding for SPIE Optics and Photonics 2023

In the last two decades many people have been searching for the optimal wavefront sensor as it can boost the performance of high-contrast imagining by orders of magnitude on the ELTs. According classical information theory, the optimal sensitivity of a wavefront sensor is 1/2 radian rms per photon. We show that classical limit is also the quantum metrology limit for starlight, which means that 1/2 radian rms per photon is really the limit. This proceeding introduces the Phase Induced Amplitude Apodized Zernike Wavefront sensor. The PIAA-ZWFS modifies a standard ZWFS with a set of aspheric lenses to increase its sensitivity. The optimized system reaches the fundamental limit for all spatial frequencies >1.7 cycles/pupil and is very close to the limit for the spatial frequencies <1.7 cycles/pupil. The PIAA-ZWFS can be seamlessly integrated with the PIAA-CMC coronagraphy. This makes the PIAA-ZWFS an ideal candidate as wavefront sensor for high-contrast imaging., Comment: 8 pages, AO4ELT7 proceeding

GMagAO-X is a visible to NIR extreme adaptive optics (ExAO) system that will be used at first light for the Giant Magellan Telescope (GMT). GMagAO-X is designed to deliver diffraction-limited performance at visible and NIR wavelengths (6 to 10 mas) and contrasts on the order of $10^{-7}$. The primary science case of GMagAO-X will be the characterization of mature, and potentially habitable, exoplanets in reflected light. GMagAO-X employs a woofer-tweeter system and includes segment phasing control. The tweeter is a 21,000 actuator segmented deformable mirror (DM), composed of seven individual 3,000 actuator DMs. This new ExAO framework of seven DMs working in parallel to produce a 21,000 actuator DM significantly surpasses any current or near future actuator count for a monolithic DM architecture. Bootstrapping, phasing, and high order sensing are enabled by a multi-stage wavefront sensing system. GMT's unprecedented 25.4 m aperture composed of seven segments brings a new challenge of co-phasing massive mirrors to 1/100th of a wavelength. The primary mirror segments of the GMT are separated by large >30 cm gaps so there will be fluctuations in optical path length (piston) across the pupil due to vibration of the segments, atmospheric conditions, etc. We have developed the High Contrast Adaptive-optics Testbed (HCAT) to test new wavefront sensing and control approaches for GMT and GMagAO-X, such as the holographic dispersed fringe sensor (HDFS), and the new ExAO parallel DM concept for correcting aberrations across a segmented pupil. The CoDR for GMagAO-X was held in September 2021 and a preliminary design review is planned for early 2024. In this paper we will discuss the science cases and requirements for the overall architecture of GMagAO-X, as well as the current efforts to prototype the novel hardware components and new wavefront sensing and control concepts for GMagAO-X on HCAT., Comment: 16 pages, 22 figures, proceeding for AO4ELT7 (Avignon, France June 2023)

Due to the low flux of exoEarths, long exposure times are required to spectrally characterize them. During these long exposures, the contrast in the dark hole will degrade as the the optical system drifts from its initial DH state. To prevent such contrast drift, a wavefront sensing and control (WFSC) algorithm running in parallel to the science acquisition can stabilize the contrast. However, pairwise probing (PWP) cannot be reused to efficiently stabilize the contrast since it relies on strong temporal modulation of the intensity in the image plane, which would interrupt the science acquisition. The use of small amplitude probes has been demonstrated but requires multiple measurements from each science sub-band to converge. Conversely, spectral linear dark field control (LDFC) takes advantage of the linear relationship between the change in intensity of the post-coronagraph out-of-band image and small changes in wavefront in the science band to preserve the DH region during science exposures. In this paper, we show experimental results that demonstrate spectral LDFC stabilizes the contrast to levels of a few $10^{-9}$ on a Lyot coronagraph testbed which is housed in a vacuum chamber. Promising results show that spectral LDFC is able to correct for disturbances that degrade the contrast by more than 100$\times$. To our knowledge, this is the first experimental demonstration of spectral LDFC and the first demonstration of spatial or spectral LDFC on a vacuum coronagraph testbed and at contrast levels less than $10^{-8}$., Comment: 14 pages, 10 figures, Techniques and Instrumentation for Detection of Exoplanets XI

The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system's adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in engineering, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow-up period of laboratory work, and the steps we are taking to mitigate them., Comment: 22 pages, 22 images, 2 tables, submitted to SPIE Proceedings (Unconventional Imaging, Sensing and Adaptive Optics 2023 Conference)

Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life., Comment: 9 pages, 2 figures, SPIE Optics and Photonics conference

The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of exo-Earths. Photonic technologies could fill this gap, potentially doubling exo-Earth yield. We review current work on photonic coronagraphs and investigate the potential of hybridized designs which combine both classical coronagraph designs and photonic technologies into a single optical system. We present two possible systems. First, a hybrid solution which splits the field of view spatially such that the photonics handle light within the inner working angle and a conventional coronagraph that suppresses starlight outside it. Second, a hybrid solution where the conventional coronagraph and photonics operate in series, complementing each other and thereby loosening requirements on each subsystem. As photonic technologies continue to advance, a hybrid or fully photonic coronagraph holds great potential for future exoplanet imaging from space., Comment: Conference Proceedings of SPIE: Techniques and Instrumentation for Detection of Exoplanets XI, vol. 12680 (2023)

Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imagers Lorentz Workshop, aims to (1) motivate oxygen detection in Proxima Centauri b and analogs as an informative science case for high-contrast imaging and direct spectroscopy, (2) overview the state of the field with respect to visible exoplanet imagers, and (3) set the instrumental requirements to achieve this goal and identify what key technologies require further development., Comment: SPIE Proceeding: 2023 / 12680-67

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter., Comment: Proceedings published in SPIE optics + Photonics (2023) Session "Instrumentation for exoplanet"

FIRST is a spectro-interferometer combining, in the visible, the techniques of aperture masking and spatial filtering thanks to single-mode fibers. This instrument aims to deliver high contrast capabilities at spatial resolutions that are inaccessible to classical coronagraphic instruments. The technique implemented is called pupil remapping: the telescope is divided into subpupils by a segmented deformable mirror conjugated to a micro-lens array injecting light into single-mode fibers. The fiber outputs are rearranged in a nonredundant configuration, allowing simultaneous measurement of all baseline fringe patterns. The fringes are also spectrally dispersed, increasing the coherence length and providing precious spectral information. The optical setup of the instrument has been adapted to fit onto the SCExAO platform at the Subaru Telescope. We present the first on-sky demonstration of the FIRST instrument at the Subaru telescope. We used eight subapertures, each with a diameter of about 1 m. Closure phase measurements were extracted from the interference pattern to provide spatial information on the target. We tested the instrument on two types of targets : a point source (Keho'oea) and a binary system (Hokulei). An average accuracy of 0.6 degree is achieved on the closure phase measurements of Keho'oea, with a statistical error of about 0.15 degree at best. We estimate that the instrument can be sensitive to structures down to a quarter of the telescope spatial resolution. We measured the relative positions of Hokulei Aa and Ab with an accuracy about 1 mas. FIRST opens new observing capabilities in the visible wavelength range at the Subaru Telescope. With SCExAO being a testing platform for high contrast imaging instrumentation for future 30-meter class telescopes, FIRST is an important stepping stone for future interferometric instrumentation on extremely large telescopes., Comment: Accepted for publication in Astronomy and Astrophysics on July 7th 2023

Kernel phase interferometry (KPI) is a data processing technique that allows for the detection of asymmetries (such as companions or disks) in high-Strehl images, close to and within the classical diffraction limit. We show that KPI can successfully be applied to hyperspectral image cubes generated from integral field spectrographs (IFSs). We demonstrate this technique of spectrally-dispersed kernel phase by recovering a known binary with the SCExAO/CHARIS IFS in high-resolution K-band mode. We also explore a spectral differential imaging (SDI) calibration strategy that takes advantage of the information available in images from multiple wavelength bins. Such calibrations have the potential to mitigate high-order, residual systematic kernel phase errors, which currently limit the achievable contrast of KPI. The SDI calibration presented here is applicable to searches for line emission or sharp absorption features, and is a promising avenue toward achieving photon-noise-limited kernel phase observations. The high angular resolution and spectral coverage provided by dispersed kernel phase offers novel opportunities for science observations which would have been challenging to achieve otherwise., Comment: 18 pages, 12 figures, accepted for publication in JATIS

Direct imaging of Earth-like planets is one of the main science cases for the next generation of extremely large telescopes. This is very challenging due to the star-planet contrast that must be overcome. Most current high-contrast imaging instruments are limited in sensitivity at small angular separations due to non-common path aberrations (NCPA). The NCPA leak through the coronagraph and create bright speckles that limit the on-sky contrast and therefore also the post-processed contrast. We aim to remove the NCPA by active focal plane wavefront control using a data-driven approach. We developed a new approach to dark hole creation and maintenance that does not require an instrument model. This new approach is called implicit Electric Field Conjugation (iEFC) and it can be empirically calibrated. This makes it robust for complex instruments where optical models might be difficult to realize. Numerical simulations have been used to explore the performance of iEFC for different coronagraphs. The method was validated on the internal source of the Magellan Adaptive Optics eXtreme (MagAO-X) instrument to demonstrate iEFC's performance on a real instrument. Numerical experiments demonstrate that iEFC can achieve deep contrast below $10^{-9}$ with several coronagraphs. The method is easily extended to broadband measurements and the simulations show that a bandwidth up to 40% can be handled without problems. Experiments with MagAO-X showed a contrast gain of a factor 10 in a broadband light and a factor 20 to 200 in narrowband light. A contrast of $5\cdot10^{-8}$ was achieved with the Phase Apodized Pupil Lyot Coronagraph at 7.5 $\lambda/D$. The new iEFC method has been demonstrated to work in numerical and lab experiments. It is a method that can be empirically calibrated and it can achieve deep contrast. This makes it a valuable approach for complex ground-based high-contrast imaging systems., Comment: 13 pages, 12 figures accepted by A&A

Direct imaging of gas giant exoplanets provides key information on planetary atmospheres and the architectures of planetary systems. However, few planets have been detected in blind surveys used to achieve imaging detections. Using Gaia and Hipparcos astrometry we identified dynamical evidence for a gas giant planet around the nearby star HIP 99770 and then confirmed this planet by direct imaging with the Subaru Coronagraphic Extreme Adaptive Optics Project. HIP 99770 b orbits 17 astronomical units from its host star, with an insolation comparable to Jupiter's and a dynamical mass of 13.9--16.1 Jupiter masses. Its planet-to-star mass ratio (7--8$\times$10$^{-3}$) is comparable to that other directly-imaged planets. The planet's atmosphere resembles an older, less-cloudy analogue of the atmospheres of previously-imaged exoplanets around HR 8799., Comment: Authors' version of revised paper, published in Science on April 14, 2023 (passed independent peer review/was recommended for publication in Science by external referees on July 5, 2022). First joint direct imaging + astrometric discovery of an exoplanet. 49 pages, 18 figures, 6 tables

The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned., Comment: 28 Pages, 15 Figures, and 4 Tables

After 16 years of on-sky operation, Subaru Telescope's facility adaptive optics AO188 is getting several major upgrades to become the extreme-AO AO3000 (3000 actuators in the pupil compared to 188 previously). AO3000 will provide high-Strehl images for several instruments from visible to mid-infrared, notably the Infrared Camera and Spectrograph (IRCS), and the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO). For this upgrade, the original 188-element deformable mirror (DM) will be replaced with ALPAO's $64\times64$ DM. The visible wavefront sensor will also be upgraded at a later date, but in the meantime we are adding a near-infrared Wavefront Sensor (NIR WFS), using either a double roof prism pyramid mode or a focal plane WFS mode. This new wavefront sensor will use for the first time First Light's C-RED ONE camera, allowing for a full control of the $64\times64$ DM at up to 1.6 kHz. One of the challenges is the use of non-destructive reads and a rolling shutter with the modulated pyramid. This upgrade will be particularly exciting for SCExAO, since the extreme-AO loop will focus more on creating high-contrast dark zones instead of correcting large atmospheric residuals. It will be the first time two extreme-AO loops will be combined on the same telescope. Finally, the setup AO3000+SCExAO+IRCS will serve as a perfect demonstrator for the Thirty Meter Telescope's Planetary Systems Imager (TMT-PSI). We will present here the design, integration and testing of AO3000, and show the first on-sky results., Comment: 14 pages, 12 figures, SPIE Astronomical Telescopes +Instrumentation, 2022, Montreal, Quebec, Canada

We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-static speckles in the image plane and currently limits high-contrast imaging performance. These statistics can be probed by any MEC observation due to the photon-counting capabilities of MKID detectors. Photon arrival time statistics can also be used to directly distinguish companions from speckles using a post-processing technique called Stochastic Speckle Discrimination (SSD). Here, we we give an overview of the SSD technique and highlight the first demonstration of SSD on an extended source -- the protoplanetary disk AB Aurigae. We then present simulations that provide an in-depth exploration as to the current limitations of an extension of the SSD technique called Photon-Counting SSD (PCSSD) to provide a path forward for transitioning PCSSD from simulations to on-sky results. We end with a discussion of how to further improve the efficacy of such arrival time based post-processing techniques applicable to both MKIDs, as well as other high speed astronomical cameras., Comment: 11 pages, 9 figures, accepted for publication in AJ