Search

JASMINE is a Japanese planned space mission that aims to reveal the formation history of our Galaxy and discover habitable exoEarths. For these objectives, the JASMINE satellite performs high-precision astrometric observations of the Galactic bulge and high-precision transit monitoring of M-dwarfs in the near-infrared (1.0-1.6 microns in wavelength). For feasibility studies, we develop an image simulation software named JASMINE-imagesim, which produces realistic observation images. This software takes into account various factors such as the optical point spread function (PSF), telescope jitter caused by the satellite's attitude control error (ACE), detector flat patterns, exposure timing differences between detector pixels, and various noise factors. As an example, we report a simulation for the feasibility study of astrometric observations using JASMINE-imagesim. The simulation confirms that the required position measurement accuracy of 4 mas for a single exposure of 12.5-mag objects is achievable if the telescope pointing jitter uniformly dilutes the PSF across all stars in the field of view. On the other hand, the simulation also demonstrates that the combination of realistic pointing jitter and exposure timing differences in the detector can significantly degrade accuracy and prevent achieving the requirement. This means that certain countermeasures against this issue must be developed. This result implies that this kind of simulation is important for mission planning and advanced developments to realize more realistic simulations help us to identify critical issues and also devise effective solutions., Comment: 13 pages, 7 figures, 1 table

We present three-dimensional (3D) maps of Jupiter's atmospheric circulation at cloud-top level from Doppler-imaging data obtained in the visible domain with JIVE, the second node of the JOVIAL network, which is mounted on the Dunn Solar Telescope at Sunspot, New Mexico. We report on 12 nights of observations between May 4 and May 30, 2018, representing a total of about 80 hours. Firstly, the average zonal wind profile derived from our data is compatible with that derived from cloud-tracking measurements performed on Hubble Space Telescope images obtained in April 2018 from the Outer Planet Atmospheres Legacy (OPAL) program. Secondly, we present the first ever two-dimensional maps of Jupiter's atmospheric circulation from Doppler measurements. The zonal velocity map highlights well-known atmospheric features, such as the equatorial hot spots and the Great Red Spot (GRS). In addition to zonal winds, we derive meridional and vertical velocity fields from the Doppler data. The motions attributed to vertical flows are mainly located at the boundary between the equatorial belts and tropical zones, which could indicate active motion in theses regions. Qualitatively, these results compare well to recent Juno data that have unveiled the three-dimensional structure of Jupiter's wind field. To the contrary, the motions attributed to meridional circulation are very different from what is obtained by cloud tracking, except at the GRS. Because of limitations with data resolution and processing techniques, we acknowledge that our measurement of vertical or meridional flows of Jupiter are still to be confirmed.

Japan Astrometry Satellite Mission for INfrared Exploration (JASMINE) is a planned M-class science space mission by the Institute of Space and Astronautical Science, the Japan Aerospace Exploration Agency. JASMINE has two main science goals. One is the Galactic archaeology with Galactic Center Survey, which aims to reveal the Milky Way's central core structure and formation history from Gaia-level (~25 $\mu$as) astrometry in the Near-Infrared (NIR) Hw-band (1.0-1.6 $\mu$m). The other is the Exoplanet Survey, which aims to discover transiting Earth-like exoplanets in the habitable zone from NIR time-series photometry of M dwarfs when the Galactic center is not accessible. We introduce the mission, review many science objectives, and present the instrument concept. JASMINE will be the first dedicated NIR astrometry space mission and provide precise astrometric information of the stars in the Galactic center, taking advantage of the significantly lower extinction in the NIR. The precise astrometry is obtained by taking many short-exposure images. Hence, the JASMINE Galactic center survey data will be valuable for studies of exoplanet transits, asteroseismology, variable stars and microlensing studies, including discovery of (intermediate mass) black holes. We highlight a swath of such potential science, and also describe synergies with other missions., Comment: 50 pages, 22 figures, accepted for publication in PASJ

A near-infrared telescope with an effective aperture diameter of thirty millimeters has been developed. The primary objective of the development is to observe northern bright stars in the $J$, $H$, and $K_{\rm s}$ bands and provide accurate photometric data on those stars. The second objective is to repeatedly observe a belt-like region along the northern Galactic plane ($|b| \le 5^\circ$ and $\delta \ge -30^\circ$) to monitor bright variable stars there. The telescope has been in use since December 2016. The purpose of this paper is to describe the design and operational performances of the telescope, photometric calibration methods, and our scientific goals. We show that the telescope has the ability to provide photometry with an uncertainty of less than 5\% for stars brighter than 7, 6.5, and 6~mag in the $J$, $H$, and $K_{\rm s}$ bands, respectively. The repeatability of the photometric measurements for the same star is better than 1\% for bright stars. Our observations will provide accurate photometry on bright stars that are lacking in the Two Micron Sky Survey and the Two Micron All-Sky Survey. Repeated observations at a good cadence will also reveal their nature of the variability in the near-infrared., Comment: Accepted for publication in Publications of the Astronomical Society of Japan

A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linewidth. The radial velocity precision $\sigma \sim 1.4$ m/s is achieved at the High Dispersion Echelle Spectrosraph for the Okayama 188-cm telescope of the National Astronomical Observatory of Japan using our astro-comb. With further improvements of the mode-selecting cavity and removal of fiber modal noises, our system will provide a simple, compact, and precise astro-comb setup in visible wavelength region., Comment: 10 pages, 7 figures

Observations of transient objects, such as short gamma-ray bursts (GRBs) and electromagnetic counterparts of gravitational wave sources, require prompt spectroscopy. To carry out prompt spectroscopy, we developed an optical-fiber integral field unit (IFU) and connected it with an existing optical spectrograph KOOLS. KOOLS with IFU, hereafter KOOLS--IFU, was mounted on the Okayama Astrophysical Observatory 188-cm telescope. The fiber core and cladding diameters of the fiber bundle are 100 $\mu$m and 125 $\mu$m, respectively, and 127 fibers are hexagonally close-packed in the sleeve of the two-dimensional (2D) fiber array. We conducted test observations to measure the KOOLS--IFU performance and obtained the following conclusions: (1) the spatial sampling is 2''.34 $\pm$ 0''.05 per fiber, and the total field of view (FoV) is 30''.4 $\pm$ 0''.65 with 127 fibers; (2) the observable wavelength and the spectral resolving power of the grisms of KOOLS are 4030--7310 A and 400--600; 5020--8830 A and 600--900; 4160--6000 A and 1000--1200; and 6150--7930 A and 1800--2400, respectively; and (3) the estimated limiting magnitude is 18.2--18.7 AB mag during 30-min exposure under the optimal condition., Comment: 18 pages, 13 figures, and 7 tables. Submitted to PASJ

We present a general surface brightness correction method for compact extended sources imaged in the slow-scan pointed observation mode of the Far-Infrared Surveyor (FIS) aboard the AKARI Infrared Astronomical Satellite. Our method recovers correct surface brightness distribution maps by re-scaling archived raw FIS maps using the surface-brightness-dependent inverse FIS response function. The flux of a target source is then automatically corrected for as the simple sum of surface brightnesses within the adopted contour encircling the perimeter of the target (i.e., contour photometry). This correction method is contrasted to the previous aperture photometry method for point sources, which directly corrects for the target flux with a flux-dependent scaling law. The new surface brightness correction scheme is applicable to objects of any shape from unresolved point sources to resolved extended objects, as long as the target is not deemed diffuse, i.e., the total extent of the target source does not exceed too much more than a single FIS scan width of 10 arcmin. The new correction method takes advantage of the well-defined shape (i.e., the scale invariance) of the point-spread function, which enables us to adopt a power-law FIS response function. We analyze the point-source photometric calibrator data using the FIS AKARI Slow-scan Tool (FAST) and constrained the parameters of the adopted power-law FIS response function. We conclude that the photometric accuracy of the new correction method is better than 10% error based on comparisons with the expected fluxes of the photometric calibrators and that resulting fluxes without the present correction method can lead up to 230% overestimates or down to 50% underestimates., Comment: accepted for publication in PASJ

We report a development of a multi-color simultaneous camera for the 188cm telescope at Okayama Astrophysical Observatory in Japan. The instrument, named MuSCAT, has a capability of 3-color simultaneous imaging in optical wavelength where CCDs are sensitive. MuSCAT is equipped with three 1024x1024 pixel CCDs, which can be controlled independently. The three CCDs detect lights in $g'_2$ (400--550 nm), $r'_2$ (550--700 nm), and $z_{s,2}$ (820--920 nm) bands using Astrodon Photometrics Generation 2 Sloan filters. The field of view of MuSCAT is 6.1x6.1 arcmin$^2$ with the pixel scale of 0.358 arcsec per pixel. The principal purpose of MuSCAT is to perform high precision multi-color transit photometry. For the purpose, MuSCAT has a capability of self autoguiding which enables to fix positions of stellar images within ~1 pix. We demonstrate relative photometric precisions of 0.101%, 0.074%, and 0.076% in $g'_2$, $r'_2$, and $z_{s,2}$ bands, respectively, for GJ436 (magnitudes in $g'$=11.81, $r'$=10.08, and $z'$=8.66) with 30 s exposures. The achieved precisions meet our objective, and the instrument is ready for operation., Comment: Published in Journal of Astronomical Telescopes, Instruments, and Systems (JATIS), open access version is available from http://astronomicaltelescopes.spiedigitallibrary.org/article.aspx?articleid=2432590